Assessment of the Wind Energy Potential of Two Burundian Sites

1-year hourly wind speed data from two Burundian stations, namely Bujumbura and Muyinga, have been processed in this work to bring an efficient help for the planning and installation of wind energy conversion systems (WECS) at those localities. Mean seasonal and diurnal variations of wind direction and wind shear exponent have been derived. Two-parameter Weibull probability density functions (PDFs) fitting the observed monthly and annual wind speed relative frequency distributions have been implemented. As shown through three complementary statistical tests, the fitting technique was very satisfactory. A wind resource analysis at 10 m above ground level (AGL) has led to a mean power density at Bujumbura which is almost thirteen fold higher than at Muyinga. The use of the empirical power law to extrapolate wind characteristics at heights from 150 to 350 m AGL has shown that energy potential of hilltops around Muyinga was only suitable for small, individual scale wind energy applications. At the opposite, wind energy potential of ridge-tops and hilltops around Bujumbura has been found suitable for medium and large scale electricity production. For that locality and at those heights, energy outputs and capacity factors (CF or Cf) have been computed for ten selected wind turbines (WTs), together with costs of electricity (COE) using the present value of cost (PVC) method. Amongst those WTs, YDF-1500-87 and S95-2.1 MW have emerged as the best options for installation owing to their highest CF and lowest COE. Moreover, an analysis of those two quantities at monthly basis for YDF-1500-87 WT has led to its best performance in the dry season. Compared to the average present COE of household hydroelectricity consumption, results of this study have evidenced economical feasibility and benefit of WECS setting in selected Burundian sites in order to supplement traditional electricity sources.

4 Billion Yuan Copper Smelting Project Landed in Qiqihar, with 100,000 Tonnes Annual Output of Copper Cathode After Reaching Designed Capacity

In the morning of August 20,Heilongjiang Zijin Copper Project formally signed agreement at Fularji District in Qiqihar City.This also signals that the copper smelting project with a total investment of 4 billion yuan,a project under planning since 2011,has formally landed in Qiqihar City.

Analysis of low voltage ride-through capability and optimal control strategy of doubly-fed wind farms under symmetrical fault

Given the“carbon neutralization and carbon peak”policy,enhancing the low voltage ride-through(LVRT)capability of wind farms has become a current demand to ensure the safe and stable operation of power systems in the context of a possible severe threat of large-scale disconnection caused by wind farms.Currently,research on the LVRT of wind farms mainly focuses on suppressing rotor current and providing reactive current support,while the impact of active current output on LVRT performance has not been thoroughly discussed.This paper studies and reveals the relation-ship between the limit of reactive current output and the depth of voltage drop during LVRT for doubly-fed induction generator(DFIG)based wind farms.Specifically,the reactive current output limit of the grid-side converter is inde-pendent of the depth of voltage drop,and its limit is the maximum current allowed by the converter,while the reac-tive current output limit of the DFIG stator is a linear function of the depth of voltage drop.An optimized scheme for allocating reactive current among the STATCOM,DFIG stator,and grid-side converter is proposed.The scheme maximizes the output of active current while satisfying the standard requirements for reactive current output.Com-pared to traditional schemes,the proposed LVRT optimization strategy can output more active power during the LVRT period,effectively suppressing the rate of rotor speed increase,and improving the LVRT performance and fault recov-ery capability of wind farms.Simulation results verify the effectiveness of the proposed scheme.

Effects of moisture content and feed rate on milling characteristics of wild apricot pits (Prunus armeniaca L.)

Milling with decortication of wild apricot pits was done in wild apricot pit decorticator working on the principle of“impact and compression”.The milling characteristics includes decortication efficiency,percentage of husk,percentage of broken kernels and output capacity was evaluated at the different levels of moisture content,i.e.,8%,10%,12%,14%and 16%(w.b.)and feed rates,i.e.,12 g/stroke,14 g/stroke,16 g/stroke,18 g/stroke and 20 g/stroke.The moisture content as well as feed rate significantly(P<0.05)affected the decortication efficiency,percentage of husk as well as brokens and output capacity.Decortication efficiency was initially increased and then decreased and opposite nature was found for the percentage of husk.Both percentage of broken kernels and output capacity decreases with the increase in moisture content,while output capacity increases with the increase in feed rate and brokens decreases with the increase in feed rate of wild apricot pits.