Discussion on Dust Removal(Suppression)System of Crushing Station in Open-Pit Coal Mine

This paper introduces the method of coal dust treatment in crushing station and the present situation of dust removal system in typical open-pit coal mine crushing station in China,and expounds the research idea of determining comprehensive dust removal(suppression)system in crushing station inspired by the working principle of"range hood".Based on the design example and link optimization of the crush-ing station of open-pit coal mine I of Thar coalfield,this paper finally draws some conclusions on the key technologies of dust removal(suppression)system of open-pit coal mine crushing station.This study has certain reference value for the technical innovation of dust removal(suppression)system in crushing station,the realization of green mining in"crushing link",and the reduction and avoidance of ecological environment pollution in mining area.

Effects of coals microscale structural features on their mechanical properties,propensity to crushing and fine dust formation

The work is dedicated to revealing the structural features of coals with different ranks,such as anthracites,metaanthracite and graphite,that determine their ability to crush and form fine dust.For this purpose,a combination of various nanoin-dentation techniques and Raman spectroscopy was used.The mechanical behavior of the selected coals was investigated by cyclic nanoindentation with increasing peak load and quasi-static loading.The alteration of the mechanical properties was studied by analysis of elastic moduli and damage indices Rw.Three groups of coals were identified based on their propensity to crushing during cyclic nanoindentation.Coals assigned to the first and second groups are characterized by local destruction in the contact zone with the indenter and the formation of a core of crushed material.Coals assigned to the third group are characterized by bulk destruction(outside the zone of contact with the indenter).In general,the ability of coals to fracture under mechanical loading decreases in the series of metamorphism due to microscale compaction of vitrinite matter.In the series of anthracite,metaanthracite and graphite,it is established that the coal matter compaction takes place for the anthracite and metaanthracite,whereas graphite reveals rather different behavior due to abrupt change of its structure.The ratios between the amorphous and crystalline phases of carbon(S)were determined by deconvolution of coals Raman spectra.The propensity of coals to crushing(a damage index Rw)increases with growth of the proportion of amorphous carbon in the coal matter.For the considered coals and metaanthracite,it is established that the proneness to destruction outside the contact zone with the indenter is determined by the ratio of amorphous and crystalline carbon of 1 and higher.When S parameter is lower than 1,the coals are being crushed only in the zone of contact with the indenter.

Dynamic crushing behavior and energy absorption of hybrid auxetic metamaterial inspired by Islamic motif art

Auxetic honeycomb structures are promising metamaterials with outstanding mechanical properties,and can be potentially used in energy absorption applications.In this study,a novel modified re-entrant hybrid auxetic metamaterial inspired by Islamic motif art is designed by integrating four-pointed double re-entrant motifs with symmetric semi-hexagonal unit cells to achieve a high energy absorption capacity(EAC).Theoretical analyses and numerical simulations are performed to examine the dynamic crushing behavior of the four-pointed double re-entrant combined structure(FDRCS).The developed finite element models(FEMs)are validated by the experiments under quasi-static compression.The deformation mode and stress-strain curves are further studied under low,medium,and high crushing velocities.The theoretically predicted plateau stress of the FDRCS under different crushing velocities is consistent with the numerical simulation results.The crushing stress and the EAC of the FDRCS are influenced by the geometric parameters and crushing velocities.The FDRCS exhibits a negative Poisson's ratio(NPR),owing to the four-point re-entrant structure(RES).Moreover,the specific energy absorption(SEA)of these structures is higher than that of nonauxetic hexagonal and auxetic re-entrant structures,owing to the generation of more plastic hinges that dissipate more energy during dynamic crushing.

Dynamic crushing behaviors and enhanced energy absorption of bio-inspired hierarchical honeycombs with different topologies

In order to pursue good crushing load uniformity and enchance energy absorption efficiency of conventional honeycombs, a kind of bio-inspired hierarchical honeycomb model is proposed by mimicking the arched crab shell structures. Three bio-inspired hierarchical honeycombs(BHHs) with different topologies are designed by replacing each vertex of square honeycombs with smaller arc-shaped structures. The effects of hierarchical topologies and multi-material layout on in-plane dynamic crushings and absorbed-energy capacities of the BHHs are explored based on the explicit finite element(FE) analysis.Different deformation modes can be observed from the BHHs, which mainly depend upon hierarchical topologies and impact velocities. According to energy efficiency method and one-dimensional(1D) shock theory, calculation formulas of densification strains and plateau stresses for the BHHs are derived to characterize the dynamic bearing capacity, which is consistent well with FE results. Compared with conventional honeycombs, the crushing load efficiency and energy absorption capacity of the BHHs can be improved by changing the proper hierarchical topology and multi-material layout. These researches will provide theoretical guidance for innovative design and dynamic response performance controllability of honeycombs.

Crushing Mechanism of Spherical Tungsten Alloy Fragments Penetrate Thick Steel Plate Target

Against protection requirements for high-speed fragments on the ground weapons,we carried out the research work of crushing mechanism at different impact speeds ofφ8.7 mm spherical tungsten alloy,the penetration to 603 armor steel was completed by 20 mm ballistic gun,and the ANSYS/LS-DYNA software was used to complete the numerical calculation of the penetration.We find that there are different crushing mechanisms of spherical tungsten alloy with different speeds and low speed,the crushing mechanism of fragment is mainly controlled by overall plastic deformation,shearing stripping,and squeezing at a high pressure and a high speed.The crushing mechanism will have a spallation phenomenon in addition to the crushing mechanism under high pressure.

Liquefaction and post-liquefaction behaviors of sands affected by immersion-induced degradation of crushed mudstone

A series of undrained triaxial tests was conducted to investigate the effect of crushed mudstone with the immersion-induced degradation on the liquefaction and post-liquefaction properties,and the undrained shearing behavior without precedent cyclic-loading histories of sands containing crushed mudstone.The tested materials with a main particle diameter of 2-0.85 mm were prepared by mixing sands and crushed mudstone to reach the prescribed mudstone content defined by dry mass ranging from 0% to 50%.The mixtures were subjected to immersion under a certain stress level and were subsequently tested.In addition,one-dimensional compression tests were also supplementally performed to visually observe the immersion-induced degradation of crushed mudstone.The test results mainly showed that: (1) the liquefaction resistance,the post-liquefaction undrained strength,and the undrained strength without a precedent cyclic-loading history decreased significantly with increasing mudstone content,M c ,up to 20%;(2) even a small amount of crushed mudstone affected these strengths;(3) the above-mentioned large reductions in the strengths were attributed to the immersion-induced degradation of crushed mudstone;(4) at M_(c) >20%,the liquefaction resistance increased while the significant increase in the undrained static strengths with and without precedent cyclic-loading histories was not observed;and (5) the increase in the liquefaction resistance at M_(c) >20% may have been attributed to both the gradual increase in the plasticity and the formation of the soil aggregates among deteriorated crushed mudstone,while the increase in the specimen density did not play an important role in such behavior.

Investigation of Carbonation of Concrete Based on Crushed Sand and Admixtures

Carbonation is a natural aging process that occurs in all types of concrete. One of its primary implications is the acceleration of steel corrosion caused by the phenomena of depassivation. The goal of this research is to investigate the carbonation of quarry sand-based concrete. The concrete is made of 100% crushed sand 0/6.3, gravel 8/15, and 15/25 from the Arab Contractor quarry in Nomayos, Cameroon, with CEM II B-P 42.5 R from CIMENCAM (Cimenteries du Cameroun). The study employed two admixtures: one with a dual superplasticizing and reducing action (Sikamen) and another with a water-repellent effect (Sika liquid). Carbonation was performed on concrete samples at the following dates: 0, 7, 14, 28, 56, 90, 180 days, one year, and six months. Carbonated concrete (CC) and non-carbonated concrete (NCC) samples are compared in terms of their physical attributes and mineralogical characteristics. The results of this investigation reveal that after more than a year and six months of carbonation, porosity decreases and permeability increases. Despite the high fineness modulus of quarry sand, the compressive strength of quarry sand-based concrete is satisfactory. Carbonation depth is relatively high on some dates, exceeding the minimal cover value for concrete reinforcement. Sikament additive increases concrete compactness and durability while decreasing permeability. Sika water repellant mixes with the lime in cement to generate complimentary crystallizations that block the mortar’s capillaries, making it watertight.

A New Rapid and Batch-oriented Crushing Method for DNA Extraction from Maize Leaves

The crushing of leaves is the most time and effort-consuming part in DNA extraction which is a fundamental step in the study of molecular biology. In this study, a new rapid and batch-oriented crushing method for DNA extraction from maize leaves was developed. In addition, the practicability of the developed method in molecular marker-assisted breeding was verified using SSR molecular maker technology so as to provide a rapid, batch-oriented, low-cost and non-toxic leafcrushing method for a large number of molecular marker tests, improving test efficiency.

Effects of particle size on crushing and deformation behaviors of rockfill materials

Strength and deformation behaviors of rockfill materials,key factors for determining the stability of dams,pertain strongly to the grain crushing characteristics.In this study,single-particle crushing tests were carried out on rockfill materials with nominal particle diameters of 2.5 mm,5 mm and 10 mm to investigate the particle size effect on the single-particle strength and the relationship between the characteristic stress and probability of non-failure.Test data were found to be described by the Weibull distribution with the Weibull modulus of 3.24.Assemblies with uniform nominal grains were then subjected to one-dimensional compression tests at eight levels of vertical stress with a maximum of 100 MPa.The yield stress in one-dimensional compression tests increased with decreasing the particle size,which could be estimated from the single-particle crushing tests.The void ratio-vertical stress curve could be predicted by an exponential function.The particle size distribution curve increased obviously with applied stresses less than 16 MPa and gradually reached the ultimate fractal grading.The relative breakage index became constant with stress up to 64 MPa and was obtained from the ultimate grading at the fractal dimension(a?2:7).A hyperbolical function was also found useful for describing the relationship between the relative breakage index and input work during one-dimensional compression tests.

IVUS引导下Step-Crush术治疗左主干分叉病变对支架贴壁情况及患者预后的影响

目的:分析血管内超声(IVUS)引导下Step-Crush术治疗左主干分叉病变对支架贴壁情况及患者预后的影响。方法:回顾分析2021年3月—2022年12月于九江市第一人民医院总院心血管内科就诊的左主干分叉病变患者60例,根据手术方式将患者分为IVUS组(n=34,采用IVUS引导下StepCrush术)和常规组(n=26,采用常规Step-Crush术)。对比两组支架情况(最大支架直径、左主干支架长度、支架贴壁不良发生率、支架边缘夹层发生率)、球囊参数(球囊最大直径、球囊最大压力)、心功能指标[左室射血分数(LVEF)、左室舒张末内径(LVEDD)]及心血管不良事件发生率。结果:相较于常规组,IVUS组最大支架直径、左主干支架长度、球囊最大直径均更长,球囊最大压力更大(P<0.05);术后2个月,IVUS组LVEF较常规组更高,LVEDD较常规组更低,差异均有统计学意义(P<0.05);IVUS组支架贴壁不良发生率、心血管不良事件发生率均更低,差异均有统计学意义(P<0.05)。两组支架边缘夹层发生率对比,差异无统计学意义(P>0.05)。结论:IVUS应用于Step-Crush术中可改善左主干分叉病变患者支架置入情况,降低支架贴壁发生率,有效预防心血管不良事件发生。

Bounding surface plasticity model for stress-strain and grain-crushing behaviors of rockfill materials

Crushing of grains can greatly influence the strength,dilatancy,and stress-strain relationship of rockfill materials.The critical state line(CSL)in the void ratio versus mean effective stress plane was extended to the breakage critical state plane(BCSP).A state void-ratio-pressure index that incorporated the effect of grain crushing was proposed according to the BCSP.Rowe’s stress-dilatancy equation was modified by adding the breakage voidratio-pressure index,which was also incorporated into the formulations of the bounding stress ratio and plastic modulus.A BCSP-based bounding surface plasticity model was proposed to describe the state-dependent stressstrain behaviors and the evolution of grain crushing during shearing process of rockfill materials,and was shown to sufficiently capture the breakage phenomenon.

Roof pre-blasting to prevent support crushing and water inrush accidents

Support crushing and water inrush when mining under an unconsolidated confined aquifer in the Qidong Coal Mine was prevented by roof pre-blasting. The mechanism and applicable conditions for this method have been studied. The results show that when an overburden structure that may cause support crushing and a water inrush accident exists the weakening of the primary key stratum, which thereby reduces its weighting step, roof pre-blasting is both feasible and effective. If the position of the primary key stratum can be moved upward to exceed 10 times the mining height the possibility of support crushing and water inrush disaster caused by key stratum compound breakage will be lowered. The overburden structure of the number 7121 working face was considered during the design of a technical proposal involving roof pre-blasting. After comprehensively analyzing the applicability of roof pre-blasting the resulting design prevented support crushing and water inrush disasters from happening at the number 7121 working face and laid a solid foundation for mining safely.

Grain crushing in geoscience materials-Key issues on crushing response,measurement and modeling:Review and preface

Grain crushing is commonly encountered in deep foundation engineering,high rockfill dam engineering,railway engineering,mining engineering,coastal engineering,petroleum engineering,and other geoscience application.Grain crushing is affected by fundamental soil characteristics,such as their mineral strength,grain size and distribution,grain shape,density and specimen size,and also by external factors including stress magnitude and path,loading rate and duration,degree of saturation,temperature and geochemical environment.Crushable material becomes a series of different materials with the change in its grading during grain crushing,resulting in a decrease in strength and dilatancy and an increase in compressibility.Effects of grain crushing on strength,dilatancy,deformation and failure mechanisms have been extensively investigated through laboratory testing,discrete element method(DEM)modelling,Weibull statistics,and constitutive modelling within the framework of the extended crushing-dependent critical state theory or the energy-based theory.Eleven papers summarized in this review article for this special issue addressed the above issues in grain crushing through the advanced testing and modelling.

Multi-scale impact crushing characteristics of polymetallic sulphide ores

The effects of crushing energy, ore hardness and particle size of cassiterite polymetallic sulphide ore and lead-zinc polymetallic sulphide ore on the crushing characteristics during impact crushing were investigated by mineral liberation analyzer(MLA) and drop weight test. The results show that both ores contain pyrrhotite, sphalerite, jamesonite, gangue mica and quartz except cassiterite. Cassiterite is closely associated with sulphide and quartz to form aggregates, which are mixed with each other in the form of intergrowth or symbiotic disseminated fine grains. Cassiterite has a significant impact on ore crushing characteristics. Ore hardness is negatively correlated with the product of crushing parameters of A and b, i.e. A×b, the effect of crushing energy on crushing fineness is related to crushing parameters A and b, and the influence degree increases with the increase of A. The influence degree increases with the increase of b when crushing energy ECS is less than 1 kW·h/t, and the influence degree decreases with the increase of b when crushing energy ECS is greater than 1 kW·h/t. The impact of crushing energy on crushing fineness is greater than that of ore particle size when the crushing energy is lower;on the contrary, the impact of ore particle size on crushing fineness is greater than that of crushing energy when crushing energy is higher.

A combined method to model grain crushing with DEM

This paper presents a combined method to model grain crushing effects with discrete element method.This method combines the two most commonly used concepts to model grain crushing in DEM,i.e.the replacement method and the agglomerate method,so that it is both accurate and efficient.The method can be easily implemented.The performance is shown by several DEM simulations of biaxial tests.Particles with different crush-abilities are modeled.DEM simulation results with and without grain crushing are compared and discussed.The change of grain size distribution due to grain crushing is also investigated.

Effect of the textural properties of rocks on their crushing and grinding features

To study the effect of the textural properties of rocks on their crushing feature, the distribution of particle size, the texture, grinding and crushing characteristics of the rocks were investigated, and the relations among them were then analyzed using statistical methods. The relations between the textural properties and the physical and mechanical features of rocks were determined.

Effect of diboron trioxide on the crushing strength and smelting mechanism of high-chromium vanadium–titanium magnetite pellets

The effect of diboron trioxide(B_2O_3) on the crushing strength and smelting mechanism of high-chromium vanadium–titanium magnetite pellets was investigated in this work. The main characterization methods were X-ray fluorescence, inductively coupled plasma–atomic emission spectroscopy, mercury injection porosimetry, X-ray diffraction, metallographic microscopy, and scanning electron microscopy–energy-dispersive X-ray spectroscopy. The results showed that the crushing strength increased greatly with increasing B_2O_3 content and that the increase in crushing strength was strongly correlated with a decrease in porosity, the formation of liquid phases, and the growth and recrystallization consolidation of hematite crystalline grains. The smelting properties were measured under simulated blast furnace conditions; the results showed that the smelting properties within a certain B_2O_3 content range were improved and optimized except in the softening stage. The valuable element B was easily transformed to the slag, and this phenomenon became increasingly evident with increasing B_2O_3 content. The formation of Ti(C,N) was mostly avoided, and the slag and melted iron were separated well during smelting with the addition of B_2O_3. The size increase of the melted iron was consistent with the gradual optimization of the dripping characteristics with increasing B_2O_3 content.

Crushing analysis and multi-objective optimization of bitubular hexagonal columns with ribs

In order to improve the crashworthiness of thin-walled columns, the energy absorption characteristics of three columns under quasi-static axial crushing loads were analyzed through LS-DYNA. Numerical results show that the energy absorption capability of the bitubular hexagonal columns with middle to middle(MTM) ribs is the best, followed by the bitubular hexagonal columns with corner to corner(CTC) ribs and the bitubular hexagonal columns without(NOT) ribs, respectively. Then, the MTM rib was optimized by using multi-objective particle swarm optimization algorithm. Through the analysis of the Pareto front for specific energy absorption(SEA, A_(se)) and peak crushing force(PCF, F_(pc)), it is found that there is a vertex on the Pareto front. The vertex has the design parameters of t_1=1.2 mm, t_2=1.2 mm, A_(se)=11.3729 k J/kg, F_(pc)=235.8491 kN. When the PCF is in a certain size, on the left of the vertex, the point with t_2=1.2 mm has the biggest SEA, meanwhile on the right of the vertex, the point with t_1=1.2 mm has the biggest SEA. Finally, the global sensitivity analysis was conducted to investigate the effect of two design parameters. The result is obtained that both SEA and PCF for MTM are more sensitive to t_1 rather than t_2 in the design domain.

Retrograde metamorphism of the eclogite in North Qaidam,western China:Constraints by joint ^(40)Ar/^(39)Ar in vacuo crushing and stepped heating

Two amphiboles and a syn-metamorphic quartz vein from the Yuka terrane,North Qaidam,western China,have been analyzed by joint40Ar/39Ar crushing in vacuo and stepwise heating techniques.The crushing in vacuo results provide information to directly constrain the timing of fluid activity and the age of amphibolite-facies retrogression.The stepwise heating results could further be used to decipher the thermal history of the UHP rocks.Amphiboles from amphibolites and quartz vein within garnetamphibolite lens analyzed by in vacuo crushing yield similarly shaped age spectra and exhibit relatively flat age plateaus for the last several steps.The characteristics of gas release patterns and geochronological data testify to the presence of significant excess40Ar within the fluid inclusions.The age plateaux with weighted mean ages（WMA） ranges from 488 to 476 Ma for amphiboles and 403 Ma for quartz（2σ）.These data points constitute amphibole WMA yielding excellent isochrons with isochron ages of 469 and 463 Ma with initial40Ar/36Ar ratios of 520 and 334,respectively.The isochron ages are interpreted to represent initial amphibolite-facies retrogression.The data points constituting the quartz age plateaux give an isochron age of 405 Ma with initial40Ar/36Ar ratio of 295,recording a significant aqueous fluid flow episode during the early Devonian.Age spectra obtained by stepwise heating of amphibole residues remaining after crushing experiments are characterized by younger and relatively complex age spectra,which are probably influenced by the combined effects of resetting argon and/or mineral inclusions.Nevertheless,we note that the spectra shapes have features in common:excluding the last two steps,minimum apparent ages are found at temperatures of around 500 ℃,corresponding to319 and 249 Ma,perhaps representing the time of isotopic resetting or resulting from release gas from mineral inclusions of,e.g.,biotite or feldspar.Maximum apparent ages are obtained at temperatures of around 800℃,corresponding to 418 and 413 Ma,which probably reflect mixed ages of radiogenic resetting and original amphibole.These results indicate that the Yuka eclogites and their retrogressed equivalents were overprinted by multiple thermal events in the Silurian and possibly as young as the Triassic.