Life Origin in the Milky Way Galaxy: III. Spatial Distribution of Overheated Stars in the Solar Neighborhood

A concept of ensemble averaged stellar reactors is developed to study the dynamics of processes occurring in stars, allocated in the ~200 pc solar neighborhood. According to the effective temperature value, four stellar classes are identified, for which the correlation coefficients and standard deviation are counted. The theory of the buoyancy terrestial elements is generalized to stellar systems. It was suggested that stars are over-heated due to the shift parameters of the nuclear processes occurring inside the stars, which leads to the synthesis of transuranium elements until the achievement of a critical nuclear mass and star explosion. The heavy transuranium elements sink downward and are concentrated in the stellar depth layers. The physical explanation of the existence of the critical Chandrasekhar star limit has been offered. Based on the spatial analysis of overheated stars, it was suggested that the withdrawal of the stellar reactor from the equilibrium state is a consequence of extragalactic compression inside the galaxy arm due to the arm spirality (not to be confused with the spirality of the galaxy itself).

Thermodynamic Analysis of the Fracture Inheritance in Overheated Steels

Based on the experimental result that Cr and C segregated on the prior grain boundaries of austenite in overheated steels,causing the inheritance of fracture mode after re-austeni- tization,a thermodynamic analysis is conducted through the calculation of equilibrium segregation amount of Cr and C in grain boundary at 860 and 1050℃ and the segregation kinetics of Cr is also calculated.Thermodynamic calculation gives an evidence that the segregation of Cr and C at grain boundaries may be regarded as one of the mechanisms of the fracture inheritance in overheated steels.

Overheated Investment in China： The Alarm Bell Is Still Ringing

The growth of fixed assets investment in China soared to a high record in the first quarter of 2004 after gross domestic product （GDP） bounced substantially in 2003. A bubble is emerging posing threats to Chinese economic development. In order to cool down the overheated investment, Chinese government should promptly take effective measures in macroeconomic control to limit or guide the red-hot investment in some sectors and slow down its growth, thus implements the changes from administrative-driven investment to enterprise-driven investment and from investment-driven economic growth to consumption-driven growth.

Effect of overheating-induced minor addition on Zr-based metallic glasses

Melt treatment is well known to have an important influence on the properties of metallic glasses(MGs).However,for the MGs quenched from different melt temperatures with a quartz tube,the underlying physical origin responsible for the variation of properties remains poorly understood.In the present work,we systematically studied the influence of melt treatment on the thermal properties of a Zr50Cu36Al14 glass-forming alloy and unveiled the microscopic origins.Specifically,we quenched the melt at different temperatures ranging from 1.1Tl to 1.5Tl(Tl is the liquidus temperature)to obtain melt-spun MG ribbons and investigated the variation of thermal properties of the MGs upon heating.We found that glass transition temperature,Tg,increases by as much as 36 K,and the supercooled liquid region disappears in the curve of differential scanning calorimetry when the melt is quenched at a high temperature up to 1.5Tl.The careful chemical analyses indicate that the change in glass transition behavior originates from the incorporation of oxygen and silicon in the molten alloys.The incorporated oxygen and silicon can both enhance the interactions between atoms,which renders the cooperative rearrangements of atoms difficult,and thus enhances the kinetic stability of the MGs.

The Thermal Comfort and Hygrothermal Performance of the First Certified Passive House in Estonia

This study presents the thermal comfort and hygrothermal performance of building envelope of the first certified passive single-family detached house in Estonia.Temperature and humidity conditions were measured from different rooms and building envelopes.This article presents analysis of measurement results during the first year after construction.Results showed high room temperature,achieved mainly due to large windows with southern exposure and the small heat loss of the building envelope.High indoor temperature decreased the indoor RH(relative humidity)to quite low levels.Even the RH was low,the moisture excess was high indicating that the design of PH(passive houses)indoor humidity loads cannot be decreased.Humidity in the externally insulated cross-laminated timber panels was observed to be high,caused by drying out of the constructional moisture and the high diffusion resistance of the wood fibre sheathing board.That caused water vapour condensation and risk for mould growth.In conclusion,while planning buildings with high-energy efficiency,more focused attention should be paid to the performance of the building service systems and moisture safety already in the preliminary stages of design.

Analysis of China's Overheated Economyand Macroeconomic Policy Options

Based on macroeconomic analysis since 2003, this article holds that a trend towardsoverheating has surfaced in Chinas economy. Chinas rapid economic expansion hasaffected the quality of its growth, with rising material and energy consumption and imbalancedeconomic structure as the main manifestations. Regarding macroeconomic policy options in2004, decision-makers should shift the policy focus from control of deflation to preventionof inflation; the pace of economic growth should be properly set; a balance betweenconsumption and investment should be strengthened by controlling excessive expansion ofinvestment, and industrial restructuring should be conducted in a coordinated manner onthe basis of properly controlling the overly rapid industrial growth; policies should becontinued to boost exports and sustainable growth of foreign investment; and more effortsshould be made to accelerate the change in the mode of economic growth.

Will Tax Help to Cool the Overheated Property Market?

Chongqing and Shanghai announced on January 27 they would launch a long-awaited pilot property tax beginning January 28. The move is part of a larger Central Government effort to cool the housing market. The results of the trial program will determine how the tax is rolled out in other locations, according to the Ministry of Finance.

Ghost Fluid方法在运动边界射流问题数值模拟中的应用

把解决多物质流问题的Ghost Fluid方法应用到具有运动边界的单物质流的数值模拟中去,结合求解界面追踪问题的Level-Set方法,提出了有效求解运动边界问题的虚拟流体算法,用数值模拟重现了"声学整流"效应现象,并用等压装配法解决了发生在流体和活塞界面上的"Overheating"效应.数值实验表明:水平管道的长度和活塞振动频率是射流形成的关键因素,数值实验中如果频率和长度设置合理,则理想气体在做简谐振动的活塞驱动下,可以产生稳定的射流.

英语专业应用型人才培养方案构建与实践

近年来英语专业过热的现象使其所存在的问题日益显现。英语专业的本科生只注重语言技能的训练,而缺乏其他相关学科的知识,进而影响其就业。针对这种情况提出英语专业新的培养方案,来探索培养应用复合型英语人才路子。

Effects of melt overheating degree on undercooling degree and amorphous forming of Nd_9Fe_(85-x)Ti_4C_2B_x(x=10, 12) magnetic alloys

The effectsof melt overheating degree on the undercooling degree and resultant solidification structures of Nd9Fe85-xTi4C2Bx（x=10, 12） glass-forming alloyswerestudied by differential thermal analysis combining with solidification structure analysis. The results indicate that the undercooling degree of Nd9Fe85-xTi4C2Bx（x=10, 12） alloys significantly increaseswith the rise of melt overheating degree, and two overheating degree thresholds corresponding to the drastic increase of the mean undercooling degree are found for each of the alloys. The existence of two turning points of the mean undercooling degreescan be linked to the structure transitions inside the overheated melts, which result in the evident increase of volume fraction of amorphous phasein the solidified structures.

The Resuming Insulation Discharge Failure and Conductor Overheating Failure Judgment Method of SF6 Electrical Equipment

Through the long time track examination and disintegration to SF6 circuit breaker, we obtain the massive monitor data and massive pictures. The criteria of resuming insulation discharge failure conforming to CSO2/CH2S>7, is quite broad to SO2 and the H2S concentration permission. Even if it reaches 100μL/L, it will not be in danger immediately to the safe operation of equipment. We may plan, arrange, and overhaul calmly. When obtaining the bare conductor overheating failure, it has not involved the resuming insulation. We may use the resuming insulation discharge failure criterion.

Simulation and experimental study on hydraulic driving fan cooling system for construction machinery working on plateau

Overheating of the engine, the transmission and the hydraulic device is a problem when the construction machinery works on plateau. To solve this problem, we proposed an electro-controlled hydraulic driving fan cooling system (ECHDFCS). The system was applied to a 50-wheel loader. We carried out the coolant temperature simulation using fluid modeling software FLOWMASTER, followed by laboratory experiments and road tests. The results show that ECHDFCS can adjust the cooling capability of the system automatically based on machine heat dissipation requirements. The coolant temperature is consequently remained within an appropriate range. The simulation results are consistent with the experiment results when the experiment is performed on the plain, but are different from the road tests in some investigated parameters on the plateau.

SF₆Byproducts in High-Humidity Environment: an Experimental Evaluation between 200^oC and 500^oC

Abstract: In the occurrence of arc discharges, spark discharges, corona discharges and overheated faults in electrical equipment, SF 6would be decomposed to complicated byproducts, such as SO2 , H2S and HF. Analyzing these byproducts is an effective method to judge the internal operation condition of electric equipment. In order to study characters of SF6byproducts at different temperature of overheated faults in the electric equipment, a series of overheated faults of electric equipment were simulated. SF6is very stable and not significantly decomposed at 200oC, 250oC and 300oC. SF6is significantly decomposed to SO2, H2S and HF at 350oC. The concentration of SO2, H2S and HF was 7.2, 1.6 and 1.9 μL/L after heating for 5 hours in environment of SF6with 3616 μL/L water, and it was increased to 23.0, 3.0 and 1.2 μL/L 3 hours later. SF6is more easily to be decomposed and decomposed more rapidly at higher temperature. The concentration of SO2, H2S and HF was 62.2, 15.6 and 3.6 μL/L after heating for 5 hours in environment of SF6with 4064 μL/L water, and it was increased to 91.4, 25.2 and 2.3 μL/L 3 hours later. SF6will be decomposed to format HF, which is strongly corrosive and whose concentration is likely to decrease when it is above a certain concentration.

Glass forming ability of Zr-and Fe-based alloys at quenching from melts

The master alloy ingots (MAI) with the nominal composition Zr 52.5 Ti 5Cu 17.9 Ni 14.6 Al 10 and Fe 61 Co 7Zr 10 Mo 5W 2B 15 (at%) were prepared by arc melting in Ti gettered Ar atmosphere. The Zr based buttons of 6 mm and 9 mm in diameter were fully amorphous, but those of 13 mm in diameter experienced crystallization. The glass forming ability (GFA) of Fe based alloys was relatively lower, and the buttons obtained were fully crystallized. The microhardness of the Zr based buttons was about 500(Hv), and the Fe based rod obtained by injection technique exhibited a high Vickers hardness of 1329. In addition, an amorphous crystalline transition layers were observed in both the buttons and the rods.

Effect of Absorption of Patch Antenna Signals on Increasing the Head Temperature

Every new generation of antennas is characterized by increased accuracy and faster transmission speeds.However,patch antennas have been known to damage human health.This type of antenna sends out electromagnetic waves that increase the temperature of the human head and prevent nerve strands from functioning properly.This paper examines the effect of the communication between the patch antenna and the brain on the head’s temperature by developing a hypothetical multi-input model that achieves more accurate results.These inputs are an individual’s blood and tissue,and the emission power of the antenna.These forces depend on the permeability and conductivity characteristics of the metal from which the antenna is fabricated.The proposed model is the first one that links the material the antenna is manufactured from and the head’s temperature.The results show that there are only a small number of materials that should be used as antenna covers.These materials are in the form of thin films.By using these thin films at different temperatures,the risk to the head can be reduced.This paper finds that the best results were obtained when the patch antenna was made of one of the following materials operating at a specific temperature:traditional materials at 305°K;casting cast steel at around 295°K;bismuth telluride(Bi2Te3)at 290°K;or barium sodium niobate at 310°K.

NEW FOCUSED ULTRASOUND TRANSDUCER FOR FAT CELL DISRUPTION

Being an emerging body-shaping technology of fat cell disruption,high-intensity focused ultrasound has been investigated intensively in recent years for its favorable natures such as painlessness,safety and noninvasion.One of the major problems for the technology,however,is the overheating of transducers.In this study,we modified the transducer design in order to solve the overheating problem.We simulated the performance of the modified design by finite element analysis and fabricated the newly designed transducer.By measuring the actual performance data,we proved that the new design can effectively reduce temperature rise while keeping the acoustic intensity field unaffected.

3D Finite Element Analysis of the Stray Loss in Power Transformer Structure Parts

In order to analyze the leakage magnetic field and stray loss in power transformer, leakage magnetic field and stray loss in structure parts of a power transformer are calculated by three-dimensional (3-D) non-linear time harmonic finite element method (FEM). The results show that stray loss and loss density in structure parts are large and which may lead to local overheating and affect performance of the transformer. The magnetic shields are used to reduce the stray loss and loss density of power transformer. Effects of these shields on stray loss and loss density of structure parts are discussed. The results show that stray loss and local overheating can be reduced and eliminated effectively by adding magnetic shields. It provides some references for the analysis of stray loss and optimization design in transformer.

Meteorites Penetration into the Dense Layers of the Earth＇s Atmosphere： Physical Mechanism behind the Explosive Phenomena

This discussion paper is an attempt to consider new ideas about the nature of explosive phenomena of the meteorite bodies in the Earth＇s atmosphere. Authors attract approaches, based on the concepts of physics of combustion, explosion and detonation in order to explain the explosive collapse of the meteorite. Authors believe that the meteorite explosion may be the result of gas-detonation mechanism of overheated meteoric bodies explosive boiling-up （the ＂vapor explosion＂）, accompanied by the formation of a supersonic front of shock wave. The considered hypothesis regarding the role of the ＂vapor explosion＂ in geological disasters can be used to explain the mechanisms of explosive phenomena in Volcanology： （1） With respect to the description of nature of phreatic eruptions; （2） for interpretation of dynamic regularities of the volcano crater opening and the subsequent shock-wave emission of steam-gas ＂fountain＂ to a height of several kilometers with fragments of magma and rocks as a result of the ＂vapor explosion＂ of overheated magma mass under the dome of the volcano.

Results of Treatment of Patients with COVID-19 and the Role of Cooling and Overheating in the Development of Viral Respiratory Infections

During the Covid-19 pandemic in Serbia on March 6.to 03.04.2020.I cured 41 cases with a very severe clinical picture of influenza or possibly Covid-19.At that time,the Health Center in Sjenica did not have the material for the diagnosis of Covid-19,and the patients refused to go to the neighboring Health Center because of the fear that caused sudden deaths.In my scientific work:“The role of cold in the origin and development of diseases with special review of some diseases of the respiratory system-treatment and prevention”,I proved the effect of cold and overheating on all organs and effective treatment.Under the effect of cooling,vasoconstriction,impaired circulation and impaired metabolism occur.Macrophage motility is reduced,phagocytes are weakened,ingestion,which causes easy implantation of the virus in the lungs.All the viral infections I followed for more than 35 years passed with mild symptoms if there was no previous cold or during the illness,even with the highly infectious Mexican flu(A/H1N1)and influenza.Patients with Covid-19 reported minimal,minor or more intense colds,which also determined the severity of the clinical picture.

Investigation of the interaction of material of fuel cladding for WWER-1000 reactor with steam at a temperature of accident overheatings

The subject of this study is the oxidation of fuel rod cladding made of material Zr1Nb(0.1% O) in steam at temperatures in the range of 660℃ to 1200℃ with a surface in the initial state (after manufacturing - grinding) and after additional chemical etching. The changes in the microstructure of tubes due to the interaction with steam were investigated. A comparison was made between the oxidation rate of this material (weight gain) and the data on the oxidation of other alloys for nuclear power plants. The oxidation rate of Zr1Nb(0.1% O) is close to the oxidation rate of other zirconium alloys. It is shown that after chemical treatment of the surface of the samples there is a more even growth of oxide films, and they have a smaller thickness for the same time of exposure than after mechanical grinding. Surface treatment before oxidation also affects the change of microstructure of samples when heated to high temperatures.