Effects of synthesis conditions on the structural and electrochemical properties of layered LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 cathode material via oxalate co-precipitation method

The uniform layered LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries was prepared by using （Ni1/3Co1/3Mn1/3）C2O4 as precursor synthesized via oxalate co-precipitation method in air. The effects of calcination temperature and time on the structure and electrochemical properties of the LiNi1/3Co1/3Mn1/3O2 were systemically studied. XRD results revealed that the optimal calcination conditions to prepare the layered LiNi1/3Co1/3Mn1/302 were 950℃ for 15 h. Electrochemical measurement showed that the sample prepared under the such conditions has the highest initial discharge capacity of 160.8 mAh/g and the smallest irreversible capacity loss of 13.5% as well as stable cycling performance at a constant current density of 30 mA/g between 2.5 and 4.3 V versus Li at room temperature.

Synthesis and Photoluminescence of BaMgAl_(10)O_(17)∶Eu^(2+) Phosphor by Oxalate Co-precipitation Process

Single phase of Ba1-x MgAl10O17 ： x Eu^2＋ （0.02≤ x ≤ 0. 14） phosphors was first successfully prepared by coprecipitation in aqueous medium with a “reverse strike” method, using oxalic acid and ammonia together as precipitants. Completely crystallized phosphors were obtained at 1300 ℃, which is 300 ℃ lower than the temperature of solid-state reaction. Their photoluminescence was investigated under UV and VUV region, respectively. The emission spectra of Ba1-x MgAl10O17：xEu^2＋ samples excited by 254 or 147 nm showed a characteristic wide band with the peak centred at about 450 454 nm. Optimum emission intensity reached at x = 0.1 and then concentration quenching occurred. The synthesized phosphor shows 10% higher emission intensity than that prepared by solid-state reaction.

Oxalate regulates crystal-cell adhesion and macrophage metabolism via JPT2/PI3K/AKT signaling to promote the progression of kidney stones

Oxalate is an organic dicarboxylic acid that is a common component of plant foods.The kidneys are essential organs for oxalate excretion,but excessive oxalates may induce kidney stones.Jupiter microtubule associated homolog 2(JPT2)is a critical molecule in Ca^(2+)mobilization,and its intrinsic mechanism in oxalate exposure and kidney stones remains unclear.This study aimed to reveal the mechanism of JPT2 in oxalate exposure and kidney stones.Genetic approaches were used to control JPT2 expression in cells and mice,and the JPT2 mechanism of action was analyzed using transcriptomics and untargeted metabolomics.The results showed that oxalate exposure triggered the upregulation of JPT2,which is involved in nicotinic acid adenine dinucleotide phosphate(NAADP)-mediated Ca^(2+)mobilization.Transcriptomic analysis revealed that cell adhesion and macrophage inflammatory polarization were inhibited by JPT2 knockdown,and these were dominated by phosphatidylinositol 3-kinase(PI3K)/AKT signaling,respectively.Untargeted metabolomics indicated that JPT2 knockdown inhibited the production of succinic acid semialdehyde(SSA)in macrophages.Furthermore,JPT2 deficiency in mice inhibited kidney stones mineralization.In conclusion,this study demonstrates that oxalate exposure facilitates kidney stones by promoting crystal-cell adhesion,and modulating macrophage metabolism and inflammatory polarization via JPT2/PI3K/AKT signaling.

Dimethylamine oxalate manipulating CsPbI_(3) perovskite film crystallization process for high efficiency carbon electrode based perovskite solar cells

Crystallization process determines the quality of perovskite films and the performances of resultant perovskite solar cells(PSCs).Dimethylamine oxalate has been proven as a multifunctional modulator,and is explored as an efficient additive in manipulating the crystallization process of CsPbI_(3) perovskite films.On one hand,oxalate serves as the precipitator that facilitates the nucleation process of intermediate.The larger size of intermediate is conductive to the larger size and smaller grain boundaries of resultant perovskite.On the other hand,in subsequent annealing process,the phase conversion and growth process of transient perovskite can be decelerated due to the strong interactions of oxalate with both dimethylamine cation(DMA^(+))and Pb^(2+).Due to the optimized crystallization kinetics,the morphology and quality of CsPbI_(3) perovskite films are comprehensively improved with lower defect concentrations,and charge recombination loss is effectively suppressed.Benefiting from the optimized crystal quality of perovskite films,the carbon electrode-based CsPbI_(3) PSCs exhibit a champion efficiency of 18.48%.This represents one of the highest levels among all hole transport layer-free inorganic perovskite solar cells.

Severe acute kidney injury due to oxalate crystal induced severe interstitial nephritis:A case report

BACKGROUND Acute kidney injury(AKI)due to interstitial nephritis is a known condition primarily attributed to various medications.While medication-induced interstitial nephritis is common,occurrences due to non-pharmacological factors are rare.This report presents a case of severe AKI triggered by intratubular oxalate crystal deposition,leading to interstitial nephritis.The aim is to outline the case and its management,emphasizing the significance of recognizing uncommon causes of interstitial nephritis.CASE SUMMARY A 71-year-old female presented with stroke-like symptoms,including weakness,speech difficulties,and cognitive impairment.Chronic hypertension had been managed with hydrochlorothiazide(HCTZ)for over two decades.Upon admis-sion,severe hypokalemia and AKI were noted,prompting discontinuation of HCTZ and initiation of prednisolone for acute interstitial nephritis.Further investigations,including kidney biopsy,confirmed severe acute interstitial nephritis with oxalate crystal deposits as the underlying cause.Despite treatment,initial renal function showed minimal improvement.However,with prednisolone therapy and supportive measures,her condition gradually improved,high-lighting the importance of comprehensive management.CONCLUSION This case underscores the importance of a thorough diagnostic approach in identifying and addressing uncommon causes of interstitial nephritis.The occurrence of interstitial nephritis due to oxalate crystal deposition,especially without typical risk factors,emphasizes the need for vigilance in clinical practice.

Activation mechanism of ammonium oxalate with pyrite in the lime system and its response to flotation separation of pyrite from arsenopyrite

The activation properties of ammonium oxalate on the flotation of pyrite and arsenopyrite in the lime system were studied in this work.Single mineral flotation tests showed that the ammonium oxalate strongly activated pyrite in high alkalinity and high Ca^(2+)system,whereas arsenopyrite was almost unaffected.In mineral mixtures tests,the recovery difference between pyrite and arsenopyrite after adding ammonium oxalate is more than 85%.After ammonium oxalate and ethyl xanthate treatment,the hydrophobicity of pyrite increased significantly,and the contact angle increased from 66.62°to 75.15°and then to 81.21°.After ammonium oxalate treatment,the amount of ethyl xanthate adsorption on the pyrite surface significantly increased and was much greater than that on the arsenopyrite surface.Zeta potential measurements showed that after activation by ammonium oxalate,there was a shift in the zeta potential of pyrite to more negative values by adding xanthate.X-ray photoelectron spectroscopy test showed that after ammonium oxalate treatment,the O 1s content on the surface of pyrite decreased from 44.03%to 26.18%,and the S 2p content increased from 14.01%to 27.26%,which confirmed that the ammonium oxalatetreated pyrite surface was more hydrophobic than the untreated surface.Therefore,ammonium oxalate may be used as a selective activator of pyrite in the lime system,which achieves an efficient flotation separation of S-As sulfide ores under high alkalinity and high Ca2+concentration conditions.

Proposal for pathogenesis-based treatment options to reduce calcium oxalate stone recurrence

Objective:Prevalence of kidney stone disease continues to increase globally with recurrence rates between 30%and 50%despite technological and scientific advances.Reduction in recurrence would improve patient outcomes and reduce cost and stone morbidities.Our objective was to review results of experimental studies performed to determine the efficacy of readily available compounds that can be used to prevent recurrence.Methods: All relevant literature up to October 2020,listed in PubMed is reviewed.Results: Clinical guidelines endorse the use of evidence-based medications,such as alkaline agents and thiazides,to reduce urinary mineral supersaturation and recurrence.However,there may be additional steps during stone pathogenesis where medications could moderate stone risk.Idiopathic calcium oxalate stones grow attached to Randall’s plaques or plugs.Results of clinical and experimental studies suggest involvement of reactive oxygen species and oxidative stress in the formation of both the plaques and plugs.The renin-angiotensin-aldosterone system(RAAS),nicotinamide adenine dinucleotide phosphate(NADPH)oxidase,mitochondria,and NOD-like receptor pyrin domain containing-3(NLRP3)inflammasome have all been implicated at specific steps during stone pathogenesis in animal models.Conclusion: In addition to supersaturation-reducing therapies,the use of anti-oxidants,free radical scavengers,and inhibitors of NADPH oxidase,NLRP3 inflammasome,and RAAS may prove beneficial for stone prevention.Compounds such as statins and angiotensin converting enzyme inhibitors are already in use as therapeutics for hypertension and cardio-vascular disease and have previously shown to reduce calcium oxalate nephrolithiasis in rats.Although clinical evidence for their use in stone prevention in humans is limited,experimental data support they be considered along with standard evidence-based medications and clinical expertise when patients are being counselled for stone prevention.

Optimization of Preparation of Fe_(3)O_(4)-L by Chemical Co-Precipitation and Its Adsorption of Heavy Metal Ions

To address the serious pollution of heavy metals in AMD,the difficulty and the high cost of treatment,Fe_(3)O_(4)-L was prepared by the chemical co-precipitation method.Based on the single-factor and RSM,the effects of particle size,total Fe concentration,the molar ratio of Fe^(2+)to Fe^(3+)and water bath temperature on the removal of AMD by Fe_(3)O_(4)-L prepared by chemical co-precipitation method were analyzed.Static adsorption experiments were conducted on Cu^(2+),Zn^(2+)and Pb^(2+)using Fe_(3)O_(4)-L prepared under optimal conditions as adsorbents.The adsorption properties and mechanisms were analyzed by combining SEM-EDS,XRD and FTIR for characterization.The study showed that the effects of particle size,total Fe concentration and the molar ratio of Fe^(2+)to Fe^(3+)are larger.Obtained by response surface optimization analysis,the optimum conditions for the preparation of Fe_(3)O_(4)-L were a particle size of 250 mesh,a total Fe concentration of 0.5 mol/L,and a molar ratio of Fe^(2+)to Fe^(3+)of 1:2.Under these conditions,the removal rates of Cu^(2+),Zn^(2+),and Pb^(2+)were 94.52%,88.49%,and 96.69%respectively.The adsorption of Cu^(2+),Zn^(2+)and Pb^(2+)by Fe_(3)O_(4)-L prepared under optimal conditions reached equilibrium at 180 min,with removal rates of 99.99%,85.27%,and 97.48%,respectively.The adsorption reaction of Fe_(3)O_(4)-L for Cu^(2+)and Zn^(2+)is endothermic,while that for Pb^(2+)is exothermic.Fe_(3)O_(4)-L can still maintain a high adsorption capacity after five cycles of adsorption-desorption experiments.Cu^(2+),Zn^(2+)and Pb^(2+)mainly exist as CuFe_(2)O_(4),Zn(OH)2,ZnFe_(2)O_(4)and PbS after being adsorbed by Fe_(3)O_(4)-L,which is the result of the combination of physical diffusion,ion exchange and surface complexation reaction.

Clinical efficacy and safety of Guipi decoction combined with escitalopram oxalate tablets in patients with depression

BACKGROUND Depression is a widespread mental health condition that requires effective treatment.In the treatment of depression,traditional Chinese medicine(TCM)offers obvious advantages,fewer adverse reactions,and a lower recurrence rate.AIM To evaluate the clinical benefits of Guipi decoction combined with escitalopram oxalate tablets for individuals with depression.METHODS In total,80 patients diagnosed as having depression were enrolled in the study and divided into either an experimental group or a control group.All of the patients were orally administered escitalopram oxalate tablets.Additionally,the experimental group received Jiajian Guipi decoction and reduced Governor vessel fumigation over 4 wk.TCM syndrome scores,Hamilton depression rating scale(HAM-D)scores,self-rating depression scale(SDS)scores,and Pittsburgh sleep quality index scores were measured for the two groups and compared before and after the treatment.The two groups were monitored for any adverse reactions.RESULTS After 4 wk of treatment,both groups exhibited a significant reduction in TCM syndrome scores compared with their pre-treatment scores(P<0.05).However,the experimental group exhibited significantly lower TCM syndrome scores than the control group(P<0.05).Similarly,the post-treatment SDS and HAM-D-24 scores were significantly lower in both groups than the pre-treatment scores(P<0.05),with the experimental group exhibiting lower scores than the control group(P<0.05).The total treatment efficiency was significantly better in the experimental group(97.14%)than in the control group(77.78%)(P<0.05).Furthermore,after 4 wk of treatment,the Pittsburgh sleep quality index scores for both groups were significantly lower than those before the treatment(P<0.05),with the experimental group exhibiting lower scores than the control group(P<0.05).The incidence of adverse reactions was significantly lower in the experimental group than in the control group(P<0.05).CONCLUSION The combination of Guipi decoction and escitalopram oxalate tablets was found to be an effective and safe treatment for depression.This combination could reduce TCM syndrome scores,improve depressive symptoms,and enhance sleep quality.

Continuous-flow electrosynthesis of urea and oxalic acid by CO_(2)-nitrate reduction and glycerol oxidation

Urea and oxalic acid are critical component in various chemical manufacturing industries.However,achieving simultaneous generation of urea and oxalic acid in a continuous-flow electrolyzer is a challenge.Herein,we report a continuous-flow electrolyzer equipped with 9-square centime-ter-effective area gas diffusion electrodes(GDE)which can simultaneously catalyze the glycerol oxidation reaction in the anode region and the reduction reaction of CO_(2)and nitrate in the cathode region,producing oxalic acid and urea at both the anode and cathode,respectively.The current density at low cell voltage(0.9 V)remained above 18.7 mA cm^(-2)for 10 consecutive electrolysis cycles(120 h in total),and the Faraday efficiency of oxalic acid(67.1%)and urea(70.9%)did not decay.Experimental and theoretical studies show that in terms of the formation of C-N bond at the cathode,Pd-sites can provide protons for the hydrogenation process of CO_(2)and NO3-,Cu-sites can promote the generation of*COOH and Bi-sites can stabilize*COOH.In addition,in terms of glycerol oxidation,the introduction of Cu and Bi into Pd metallene promotes the oxidation of hydroxyl groups and the cleavage of C-C bond in glycerol molecules,respectively.

Selective leaching of lithium from spent lithium-ion batteries using sulfuric acid and oxalic acid

Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a series of separation steps such as precipitation,extraction,and stripping to separate the individual valuable metals.In this study,we present a process for selectively leaching lithium through the synergistic effect of sulfuric and oxalic acids.Under optimal leaching conditions(leaching time of 1.5 h,leaching temperature of 70°C,liquid-solid ratio of 4 mL/g,oxalic acid ratio of 1.3,and sulfuric acid ratio of 1.3),the lithium leaching efficiency reached89.6%,and the leaching efficiencies of Ni,Co,and Mn were 12.8%,6.5%,and 21.7%.X-ray diffraction(XRD)and inductively coupled plasma optical emission spectrometer(ICP-OES)analyses showed that most of the Ni,Co,and Mn in the raw material remained as solid residue oxides and oxalates.This study offers a new approach to enriching the relevant theory for selectively recovering lithium from spent LIBs.

Determination of Carbon and Nitrogen Isotope Fractions in Tartaric Acid, Oxalic Acid, Glucose and Fructose—National Center of High Technologies of Georgia

Tartaric acid, oxalic acid, glucose, and fructose are highly important compounds. A comprehensive study of these substances is fascinating from a scientific perspective. They are key components found in wine, vegetables, and fruits. Understanding the isotopic compositions in organic compounds is crucial for comprehending various biochemical processes and the nature of substances present in different natural products. Tartaric acid, oxalic acid, glucose, and fructose are widely distributed compounds, including in vegetables and fruits. Tartaric acid plays a significant role in determining the quality and taste properties of wine, while oxalic acid is also prevalent but holds great interest for further research, especially in terms of carbon isotopic composition. We can unveil the mechanisms of processes that were previously impossible to study. Glucose and fructose are the most common monosaccharides in the hexose group, and both are found in fruits, with sweeter fruits containing higher amounts of these substances. In addition to fruits, wheat, barley, rye, onions, garlic, lentils, peppers, dried fruits, beans, broccoli, cabbage, tomatoes, and other foods are also rich sources of fructose and glucose. To determine the mass fraction of the carbon-13 isotope in these compounds, it is important to study their changes during natural synthesis. These compounds can be modified with a carbon center. According to the existing isotopic analysis method, these compounds are converted into carbon oxide or dioxide [1]. At this point, the average carbon content in the given compound is determined, but information about isotope-modified centers is lost. Dilution may occur through the transfer of other carbon-containing organic compounds in the sample or by dilution with natural carbon or carbon dioxide during the transfer process. This article discusses the possibility of carbon-13 isotope propagation directly in these compounds, both completely modified and modified with individual carbon centers. The literature provides information on determining carbon-13 substance in organic compounds, both with a general approach and for individual compounds [2] [3].

Kinetics of thermal decomposition of lanthanum oxalate hydrate

Lanthanum oxalate hydrate La2（C2O4）3·10H2O,the precursor of La2O3 ultrafine powders,was prepared by impinging stream reactor method with PEG 20000 as surfactant.Thermal decomposition of La2（C2O4）3·10H2O from room temperature to 900 °C was investigated and intermediates and final solid products were characterized by FTIR and DSC-TG.Results show that the thermal decomposition process consists of five consecutive stage reactions.Flynn-Wall-Ozawa（FWO） and Kissinger-Akahira-Sunose（KAS） methods were implemented for the calculation of energy of activation（E）,and the results show that E depends on α,demonstrating that the decomposition reaction process of the lanthanum oxalate is of a complex kinetic mechanism.The most probable mechanistic function,G（α）=[1-（1＋α）1/3]2,and the kinetic parameters were obtained by multivariate non-linear regression analysis method.The average E-value that is compatible with the kinetic model is close to value which was obtained by FWO and KAS methods.The fitting curve matches the original TG curve very well.

Effects of synthesis conditions on layered Li[Ni_(1/3)Co_(1/3)Mn_(1/3)]O_2 positive-electrode via hydroxide co-precipitation method for lithium-ion batteries

Layered Li[Ni1/3Co1/3Mn1/3]O2 was synthesized with complex metal hydroxide precursors that were prepared by a co-precipitation method.The influence of coordination between ammonia and transition-metal cations on the structural and electrochemical properties of the Li[Ni1/3Co1/3Mn1/3]O2 materials was studied.It is found that when the molar ratio of ammonia to total transition-metal cations is 2.7：1,uniform particle size distribution of the complex metal hydroxide is observed via scanning electron microscopy.The average particle size of Li[Ni1/3Co1/3Mn1/3]O2 materials was measured to be about 500 nm,and the tap-density was measured to be approximately 2.37 g/cm3,which is comparable with that of commercialized LiCoO2.XRD analysis indicates that the presently synthesized Li[Ni1/3Co1/3Mn1/3]O2 has a hexagonal layered-structure.The initial discharge capacity of the Li[Ni1/3Co1/3Mn1/3]O2 positive-electrode material is determined to be 181.5 mA·h/g using a Li/Li[Ni1/3Co1/3Mn1/3]O2 cell operated at 0.1C in the voltage range of 2.8-4.5 V.The discharge capacity at the 50th cycle at 0.5C is 170.6 mA·h/g.

Preparation of MnxNi0.5-xZn0.5Fe2O4 Nanorods by the Co-precipitation Method

MnxNi0.5-xZn0.5Fe2O4 nanorods were successfully synthesized by the thermal treatment of rod-like precursors that were fabricated by the co-precipitation of Mn2＋, Ni2＋, and Fe2＋ in the lye. The phase, morphology, and particle diameter were examined by the X-ray diffraction and transmission electron microscopy. The magnetic properties of the samples were studied using a vibrating sample magnetometer. nanorods with a diameter of 35 nm and an The results indicated that pure Ni0.5-xZn0.5Fe2O4 aspect ratio of 15 were prepared. It was found that the diametei of the MnxNi0.5-xZn0.5Fe2O4（0≤x≤0.5） samples increased, the length and the aspect .ratio decreased, with an increase in x value. When x=0.5, the diameter and the aspect ratio of the sample reached up to 50 nm and 7-8, respectively. The coercivity of the samples first increased and then decreased with the increase in the x value. The coercivity of the samples again increased when the x value was higher than 0.4. When x=0.5, the coercivity of the MnxNi0.5-xZn0.5Fe2O4 sample reached the maximal value （134.3 Oe） at the calcination temperature of 600 ℃. The saturation magnetization of the samples first increased and then. decreased with the increase in the x value. When x=0.2, the saturation magnetizat：ion of the sample reached the maximal value （68.5 emu/g） at the calcination temperature of 800 ℃.

Synthesis and Luminescence Property of Hierarchical Europium Oxalate Micropaticles

Hierarchical europium oxalate Eu2（C2O4）3.10H2O micro-particles were synthesized through a simple precipitation method at room temperature in present of trisodium citrate. The products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, and photoluminescence. The possible formation mechanism of the hierarchical europium oxalate Eu2（C2O4）3.10H2O micro-particles was discussed.

Recovery of iron from waste ferrous sulphate by co-precipitation and magnetic separation

Magnetite concentrate was recovered from ferrous sulphate by co-precipitation and magnetic separation. In co-precipitation process, the effects of reaction conditions on iron recovery were studied, and the optimal reaction parameters are proposed as follows： n（CaO）/n（Fe2＋） 1.4：1, reaction temperature 80 ℃, ferrous ion concentration 0.4 mol/L, and the final mole ratio of Fe3＋ to FJ＋ in the reaction solution 1.9-2.1. In magnetic separation process, the effects of milling time and magnetic induction intensity on iron recovery were investigated. Wet milling played an important part in breaking the encapsulated magnetic phases. The results showed that the mixed product was wet-milled for 20 min before magnetic separation, the grade and recovery rate of iron in magnetite concentrate were increased from 51.41% and 84.15% to 62.05% and 85.35%, respectively.

Synthesis of Methyl Glycolate by Hydrogenation of Dimethyl Oxalate over Cu-Ag/SiO_2 Catalyst

Methyl glycolate is a good solvent and can be used as feedstock for the synthesis of some important organic chemicals. Catalytic hydrogenation of dimethyl oxalate （DMO） over copper-silver catalyst supported on silica was studied. The Cu-Ag/SiO2 catalyst supported on silica sol was prepared by homogeneous deposition-precipitation of the mixture of aqueous euprammonia complex and silica sol. The proper active temperature of Cu-Ag/SiO2 catalyst for hydrogenation of DMO was 523-623 K. The most preferable reaction conditions for methyl glycolate （MG） were optimized： temperature at 468-478 K, 40-60 mesh catalyst diameter, H2/DMO ratio 40, and 1.0 h^-1 of LHSV.

Effect of copper loading on texture,structure and catalytic performance of Cu/SiO_2 catalyst for hydrogenation of dimethyl oxalate to ethylene glycol

Cu/SiO2 catalysts prepared by a convenient and efficient method using the urea hydrolysis deposition-precipitation （UHDP） technique have been proposed focusing on the effect of copper loading.The texture,structure and composition are systematically characterized by ICP,FTIR,N 2-physisorption,N2O chemisorption,TPR,XRD and XPS.The formation of copper phyllosilicate is observed in Cu/SiO2 catalyst by adopting UHDP method,and the amount of copper phyllosilicate is related to copper loading.It is found the structure properties and catalytic performance is profoundly affected by the amount of copper phyllosilicate.The excellent catalytic activity is attributed to the synergetic effect between Cu0 and Cu ＋.DMO conversion and EG selectivity are determined by the amount of Cu0 and Cu＋,respectively.The proper copper loading （30 wt%） provides with the highest ratio of Cu ＋ /Cu0,giving rise to the highest EG yield of 95% under the reaction conditions of p=2.0 MPa,T=473 K,H2/DMO=80 and LHSV=1.0h-1.

Removal of iron from ilmenite by KOH leaching-oxalate leaching method

Oxalic acid was used for the removal of iron from the intermediates of ilmenite leached by KOH liquor. Various parameters, such as pH, temperature, initial oxalate concentration, and illumination were investigated. Meanwhile, it was found that orthorhombic crystal Ti2O2（OH）2（C2O4）-H2O formed as the leaching proceeded. Scanning electronic microscope （SEM） images implied that the formation of Ti2O2（OH）2（C2O4）.H2O with good crystallinity proceeded through three stages. Calcining Ti2O2（OH）2（C2O4）·H2O, anatase （350℃） or mtile （550℃） type TiO2 was obtained, respectively. Element analysis found that the calcined product contained 94.9% TiO2 and 2.5% iron oxide, but only about 1600 ppm dissolvable iron oxide was left, which indicates that oxalic acid was comparatively effective on iron oxide removal from the intermediates. Finally, an improved route was proposed for the upgrading of ilmenite into mtile.