Selective leaching of lithium from spent lithium-ion batteries using sulfuric acid and oxalic acid

Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a series of separation steps such as precipitation,extraction,and stripping to separate the individual valuable metals.In this study,we present a process for selectively leaching lithium through the synergistic effect of sulfuric and oxalic acids.Under optimal leaching conditions(leaching time of 1.5 h,leaching temperature of 70°C,liquid-solid ratio of 4 mL/g,oxalic acid ratio of 1.3,and sulfuric acid ratio of 1.3),the lithium leaching efficiency reached89.6%,and the leaching efficiencies of Ni,Co,and Mn were 12.8%,6.5%,and 21.7%.X-ray diffraction(XRD)and inductively coupled plasma optical emission spectrometer(ICP-OES)analyses showed that most of the Ni,Co,and Mn in the raw material remained as solid residue oxides and oxalates.This study offers a new approach to enriching the relevant theory for selectively recovering lithium from spent LIBs.

Continuous-flow electrosynthesis of urea and oxalic acid by CO_(2)-nitrate reduction and glycerol oxidation

Urea and oxalic acid are critical component in various chemical manufacturing industries.However,achieving simultaneous generation of urea and oxalic acid in a continuous-flow electrolyzer is a challenge.Herein,we report a continuous-flow electrolyzer equipped with 9-square centime-ter-effective area gas diffusion electrodes(GDE)which can simultaneously catalyze the glycerol oxidation reaction in the anode region and the reduction reaction of CO_(2) and nitrate in the cathode region,producing oxalic acid and urea at both the anode and cathode,respectively.The current density at low cell voltage(0.9 V)remained above 18.7 mA cm^(-2) for 10 consecutive electrolysis cycles(120 h in total),and the Faraday efficiency of oxalic acid(67.1%) and urea(70.9%)did not decay.Experimental and theoretical studies show that in terms of the formation of C-N bond at the cathode,Pd-sites can provide protons for the hydrogenation process of CO_(2) and NO_(3)^(-),Cu-sites can promote the generation of *COOH and Bi-sites can stabilize *COOH.In addition,in terms of glycerol oxidation,the introduction of Cu and Bi into Pd metallene promotes the oxidation of hydroxyl groups and the cleavage of C-C bond in glycerol molecules,respectively.

Comparative proteomic analysis of renal tubular epithelial cell injury caused by oxalic acid and calcium oxalate monohydrate

Objective To analyze and identify the differentially expressed proteins in human renal tubular epithelial ceils ( HK-2) after injury caused by oxalic acid and calcium oxalate monohydrate ( COM ) crystal,and to explore the potential role of renal tubular cell injury in kidney stone formation. Methods Normal HK-2 cells

Determination of Carbon and Nitrogen Isotope Fractions in Tartaric Acid, Oxalic Acid, Glucose and Fructose—National Center of High Technologies of Georgia

Tartaric acid, oxalic acid, glucose, and fructose are highly important compounds. A comprehensive study of these substances is fascinating from a scientific perspective. They are key components found in wine, vegetables, and fruits. Understanding the isotopic compositions in organic compounds is crucial for comprehending various biochemical processes and the nature of substances present in different natural products. Tartaric acid, oxalic acid, glucose, and fructose are widely distributed compounds, including in vegetables and fruits. Tartaric acid plays a significant role in determining the quality and taste properties of wine, while oxalic acid is also prevalent but holds great interest for further research, especially in terms of carbon isotopic composition. We can unveil the mechanisms of processes that were previously impossible to study. Glucose and fructose are the most common monosaccharides in the hexose group, and both are found in fruits, with sweeter fruits containing higher amounts of these substances. In addition to fruits, wheat, barley, rye, onions, garlic, lentils, peppers, dried fruits, beans, broccoli, cabbage, tomatoes, and other foods are also rich sources of fructose and glucose. To determine the mass fraction of the carbon-13 isotope in these compounds, it is important to study their changes during natural synthesis. These compounds can be modified with a carbon center. According to the existing isotopic analysis method, these compounds are converted into carbon oxide or dioxide [1]. At this point, the average carbon content in the given compound is determined, but information about isotope-modified centers is lost. Dilution may occur through the transfer of other carbon-containing organic compounds in the sample or by dilution with natural carbon or carbon dioxide during the transfer process. This article discusses the possibility of carbon-13 isotope propagation directly in these compounds, both completely modified and modified with individual carbon centers. The literature provides information on determining carbon-13 substance in organic compounds, both with a general approach and for individual compounds [2] [3].

Red-mud treatment using oxalic acid by UV irradiation assistance

Red-mud is the residue from the Bayer process, in which the iron minerals should be removed before red-mud is used to produce refractory materials. The iron minerals in red-mud were extracted by oxalic acid solution. The content of Fe （calculated in Fe203） in red-mud was reduced from 17.6% to less than 1% after being treated by 1 mol/L oxalic acid solution at 75 ℃ for 2 h. The Fe（Ⅲ） oxalate solution obtained was then irradiated by UV light, resulting in the precipitation of Fe（Ⅱ） oxalate. Under UV photocatalysis, more than 90% of Fe（Ⅲ） oxalate in the extracted solution was transformed into the precipitation of Fe（Ⅱ） oxalate crystallite （fl-FeC2O4·2H2O）. The filtrate from the Fe（Ⅱ） oxalate precipitate filtration could be reused in the next cycle. The mechanism ofUV photocatalysis precipitation was also discussed.

Effect of Foliar Application of Amino Acid on the Quality and Enzyme Activity of Flowering Chinese Cabbage(Brassica parachinensis Bailey)

A pot experiment was conducted to study the influences of foliar application of glycine,alanine,lysine,and glutamic acid in 200 mg/kg or 500 mg/kg upon the quality and enzyme activity of flowering Chinese cabbage（Brassica parachinensis Bailey）.The results showed that all the application of these four amino acids could increase the yield of flowering Chinese cabbage,significantly raise the content of soluble sugar,and reduce the accumulation of nitrate.The applications of three other amino acids except alanine can increase the content of soluble proteins and decrease the accumulation of oxalic acid.However,the application of amino acid has insignificant influences on the SPAD number of chlorophyll,and causes the decrease of Vitamin C content.Meanwhile,the application of amino acid can improve the activity of nitrate reductase（NR） and glutamate dehydrogenase（GDH） as well.It shows that the application of amino acid is beneficial to improve ammonia metabolism,reduce the accumulation of nitrate and oxalic acid,increase the content of soluble sugar and soluble proteins,and improve the quality of flowering Chinese cabbage.

Catalytic ozonation of phenol and oxalic acid with copper-loaded activated carbon

A novel heterogeneous catalytic ozonation process in water treatment was studied, with a copper-loaded activated carbon （Cu/AC） that was prepared by an incipient wetness impregnation method at low temperature and tested as a catalyst in the ozonation of phenol and oxalic acid. Cu/AC was characterized using XRD, BET and SEM techniques. Compared with ozonation alone, the presence of Cu/AC in the ozonation processes significantly improves the degradation of phenol or oxalic acid. With the introduction of the hydroxyl radical scavenger, i.e., turt-butanol alcohol （t-BuOH）, the degradation efficiency of both phenol and oxalic acid in the Cu/AC catalyzed ozonation process decreases by 22% at 30 min. This indicates that Cu/AC accelerates ozone decomposition into certain concentration of hydroxyl radicals. The amount of Cu（II ） produced during the reaction of Cu/AC-catalyzed ozonation of phenol or oxalic acid is very small, which shows that the two processes are both heterogeneous catalytic ozonation reactions.

Photocatalytic activity of CuO towards HER in catalyst from oxalic acid solution under simulated sunlight irradiation

CuO was synthesized by thermal decomposition of Cu(NO3)2·3H2O at various temperatures and characterized by powder X-ray diffractometry(XRD) as well as scanning electron microscopy(SEM).The effects of calcination temperature,category of sacrificial reagent,initial sacrificial reagent concentration,and Ag loading content on the photocatalytic activity of the as-obtained CuO sample were investigated.The results show that the as-obtained CuO exhibits high activity for photocatalysis of H2 evolution reaction(HER) in oxalic acid solution under simulated sunlight irradiation.The highest photocatalytic activity of the as-obtained CuO was achieved at the calcination temperature of 1000℃,and oxalic acid was used as the sacrificial reagent with the concentration 0.05 mol/L.H2 evolution rate is as high as 2.98 mmol/(h·g) with 2%(mass fraction) loaded Ag.The possible photocatalytic reaction mechanism on the CuO photocatalyst for HER in oxalic acid solution was also discussed.

Activation flotation and mechanism of lime-depressed pyrite with oxalic acid

Flotation tests, contact angle measurements, infrared spectrum analyses, X-ray analyses and computer simulation were carried out in order to study the activation mechanism of lime-depressed pyrite with oxalic acid. The results show that the oxalic acid effectively eliminated the hydrophilic calcium film from the surface of pyrite. Therefore, the efficiency of pyrite flotation was also activated. The results indicate that after reacting with hydrophobic insoluble remainders on the surface of pyrite, oxalic acid can pro- duce hydrophilic compounds, such as CaC03, Ca（OH）2 and Fe（OH）3. As a consequence, a flesh pyrite layer was exposed and its flotation activated.

Oxalic acid catalyzed solvent-free one pot synthesis of coumarins

Oxalic acid was found to be an efficient catalyst for Pechmann condensation, which includes the reaction between phenols and β-keto esters leading to formation of coumarin derivatives. The advantages of present methods are the use of cheap and easy available catalyst, solvent-free reaction conditions, better yields and shorter reaction time.

Effect of Oxalic Acid on Potassium Release from Typical Chinese Soils and Minerals

Oxalic acid plays an important role in improving the bioavailability of soil nutrients. Batch experiments were employed to examine the influences of oxalic acid on extraction and release kinetics of potassium （K） from soils and minerals along with the adsorption and desorption of soil K^＋. The soils and minerals used were three typical Chinese soils, black soil （Mollisol）, red soil （Ultisol）, and calcareous alluvial soil （Entisol）, and four K-bearing minerals, biotite, phlogopite, muscovite, and microcline. The results showed that soil K extracted using 0.2 mol L^-1 oxalic acid was similar to that using 1 mol L^-1 boiling HNO3. The relation between K release （y） and concentrations of oxalic acid （c） could be best described logarithmically as y = a ＋ blogc, while the best-fit kinetic equation of K release was y = a ＋ b√t, where a and b are the constants and t is the elapsed time. The K release for minerals was ranked as biotite 〉 phlogopite 〉〉 muscovite 〉 microcline and for soils it was in the order： black soil 〉 calcareous alluvial soil 〉 red soil. An oxalic acid solution with low pH was able to release more K from weathered minerals and alkaline soils. Oxalic acid decreased the soil K^＋ adsorption and increased the soil K^＋ desorption, the effect of which tended to be greater at lower solution pH, especially in the red soil.

Effect of organic acid on Cd toxicityin tomato and bean growth

ＥｆｆｅｃｔｏｆｏｒｇａｎｉｃａｃｉｄｏｎＣｄｔｏｘｉｃｉｔｙｉｎｔｏｍａｔｏａｎｄｂｅａｎｇｒｏｗｔｈＸｕｅＤｏｎｇｓｅｎ；ＲｏｂｅｒｔＢ．Ｈａｒｒｉｓｏｎ；ＣｈａｒｌｅｓＬ．Ｈｅｎｒｙ（ＵｎｉｖｅｒｓｉｔｙｏｆＷａｓｈｉｎｇｔｏｎ，ＡＲＩＯＳｅａ...

Dissolution kinetics of iron oxides in clay in oxalic acid solutions

Clay samples containing 8.15% iron oxides and 27.49% alumina were leached in oxalic acid. Leaching experiments were per-formed in aqueous solutions of oxalic acid of 0.2-2 mol/L at 40-80 C for up to 90 min. The mixed kinetic mechanism, i.e., t/τ=[（1 2X/3） （1 X）2/3 ]＋b[ 1 （1 X）1/3], seemed to be the most appropriate one to fit the kinetic data of leaching iron oxides contained in clay in the aqueous oxalic acid solutions. The Arrhenius activation energy for leaching in the 1.8 mol/L oxalic acid was found to be 41.035 kJ/mol.

Effects of Pesticide Applications on the Biochemical Properties of Transgenic cry 2A Rice and the Life History Parameters of Nilaparvata lugens Stl (Homptera: Delphacidae)

Effects of transgenic Bt rice on non-target pests following pesticide applications plays an important role in evaluating the ecological safety of transgenic rice. Changes of the life history parameters of laboratory population of Nilaparvata lugens feeding on transgenic Bt rice T2A-1 and its parental line cv. MH63 as the control, and the contents of oxalic acid and soluble sugar following three pesticides （triazophos, jinggangmycin and chlorantraniliprole） treatments were investigated in this paper. Results showed that the population parameters of N. lugens and the physiological and biochemical parameters of rice did not differ significantly between T2A-1 and MH63 without pesticide application. But, the emergence rate （ER）, the nymphal number of next generation （NN）, and the index of population trend （IP） on T2A-1 treated with 10 mg L^-1 of triazophos were significantly higher than those on MH63, respectively, while the hatchability （HB） on T2A-1 treated with the three pesticides were obviously lower than those on MH 63. Furthermore, the content of oxalic acid in MH63 treated with 20 mg L-1 triazophos and, 40 and 80 mg L-1 chlorantraniliprole was significantly higher than that in T2A-1, while the content of soluble sugar in T2A-1 treated with 400 mg L-1 jinggangmycin was significantly higher than that in MH63. The results above indicated that triazophos in a low dose could cause a more favor of T2A-1 to population growth of N. lugens compared with MH 63.

Sclerotinia sclerotiorum virulence is affected by mycelial age via reduction in oxalate biosynthesis

Sclerotinia sclerotiorum is one of the most devastating necrotrophic phytopathogens. Virulence of the hyphae of this fungus at different ages varies significantly. Molecular mechanisms underlying this functional distinction are largely unknown. In this study, we confirmed the effect of mycelial culture time/age on virulence in two host plants and elucidated its molecular and morphological basis. The virulence of the S. sclerotiorum mycelia in plants dramatically decreases along with the increase of the mycelial age. Three-day-old mycelia lost the virulence in plants. Comparative proteomics analyses revealed that metabolism pathways were comprehensively reprogrammed to suppress the oxalic acid（OA） accumulation in old mycelia. The oxaloacetate acetylhydrolase（OAH）, which catalyzes OA biosynthesis, was identified in the S. sclerotiorum genome. Both gene expression and protein accumulation of OAH in old mycelia were strongly repressed. Moreover, in planta OA accumulation was strikingly reduced in old mycelia-inoculated plants compared with young vegetative mycelia-inoculated plants. Furthermore, supply with 10 mmol L^（-1） OA enabled the old mycelia infect the host plants, demonstrating that loss of virulence of old mycelia is mainly caused by being unable to accumulate OA. Additionally, aerial mycelia started to develop from 0.5-day-old vegetative mycelia and dominated over 1-day-old mycelia grown on potato dextrose agar plates. They were much smaller in hypha diameter and grew significantly slower than young vegetative mycelia when subcultured, which did not maintain to progenies. Collectively, our results reveal that S. sclerotiorum aerial hyphae-dominant old mycelia fail to accumulate OA and thereby lose the virulence in host plants.

An Efficient and Simple Reaction: Solvent-Free Preparation of Rosolic Acid Under Microwave Irradiation

1 Introduction Rosolic acid, also called as resinous acid, is a trihydroxyphenyl methane dye mainly used as an oxidation resistant indicator in acid-base titration with sharp color change depending on the pH, from 5.0（yellow） to 6.8（pink）. It is also used as an initial reactant in the syntheses of 4,4＇,4＂-tris（acyloxy）trityl chloride and its bromide for protection of primary hydroxyl groups, and a monomer in polyreaction to prepare color polymer fiber as pH probe.

Matrix Effects and Behaviors of Elements in Oxalic Acid Medium by Inductively Coupled Plasma Mass Spectrometry

The influence of different concentration of oxalic acid matrix on elemental inductively coupled plasma mass spectrometry （ICP-MS） has been investigated. It has been proved that the sensitivity of analytes can be significantly enhanced by adding small amounts of oxalic acid medium with adjusted nebulizer flow-rate gas, especially for the elements with ionization potential between 9 and 11 eV. Oxalic acid, as an enhancement agent, can be used to compensate the signal depression caused by inorganic matrix and to improve the detection limits about two to eight times, for the hard-to-ionize elements in ICP-MS determination.

Removal of Vand Fe from spent denitrification catalyst by using oxalic acid:Study of dissolution kinetics and toxicity

The selective dissolution of V and Fe from spent denitrification catalyst(SDC)with oxalic acid was investigated to minimise their environmental effects.The dissolution kinetics of different elements from SDC by using 0.1–1.5 mol L^(-1) oxalic acid concentration was studied at 60℃–90℃.V and Fe were preferentially released(65%and 81%)compared with Al,Ti and W within 5 min due to the redox reactions of oxalic acid.The dissolved fractions of Fe,V,Al,Wand Ti increased with the increase of oxalic acid concentration and reaction temperature.The dissolution kinetic experiments were analysed and controlled diffusion with n<0.5 according to the Avrami dissolve reaction model(R^(2)>0.92).The Arrhenius parameters of the Ea values of Ti,W,V,Fe and Al from SDC with oxalic acid were 30,26,20,19 and 11 kJ mol^(-1),respectively.The obtained Avrami equation of V and Fe was successfully used to predict their leaching behaviour in oxalic acid.Toxicity characteristic leaching procedure revealed that the toxicity risk of Vand Fe metals from SDC after leaching with oxalic acid decreased to below 5 mg kg^(-1) residua.Overall,the leaching residua by oxalic acid indicated its safety for the environment.

Preparation of Porous Alumina Film on Aluminum Substrate by Anodization in Oxalic Acid

Self-ordering of the cell arrangement of the anodic porous alumina was prepared in oxalic acid solution at a constant potential of 40V and at a temperature of 20C. The honeycomb structure made by one step anodization method and two step anodization method is different. Pores in the alumina film prepared by two step anodization method were more ordered than those by one step anodization method.

Recovery of oxalic acid from mother-liquor containing hydrochloric acid and cobalt by solvent extraction with P350

The solvent of P350 was applied to extract and separate the oxalic acid from the mother-liquor originated from the precipitation of cobalt by oxalic acid,and its extraction mechanism was deduced.Some factors,including the concentration of P350, the concentration of hydrochloric acid and the concentration of oxalic acid were investigated to determine the best distribution coefficient of the oxalic acid.In the case of phase ratio(O/A)at 2.0,the extraction of the oxalic acid was more than 95%and its concentration in the extraction raffinate was lower than 0.004 0 mol/L after six-stage counter-current extraction.While the phase ratio(O/A)of the stripping was at 1.0,the recovery of oxalic acid attained more than 95%after ten-stage counter-current stripping.