Control for Modified University of Cape Town Process Using Oxidation-Reduction Potential in the Second Anoxic Zone

The aim of this work is to evaluate the feasibility of applying the technology of oxidation-reduction potential （ORP） control on the municipal wastewater treatment system for nitrogen and phosphorus removal. Meanwhile the relation between the optimal ORP （ ORPopt ） and influent C/N ratio was evaluated, in which the influent chemical oxygen demand （ COD ） concentration was stabilized at （290 ± 10 ） mg/L, the influent total phosphorus （TP） concentration was stabilized at （7.0 ± 0.5 ） mg/L. The results indicated that： （1） the ORP in the second anoxic zone had effect on nitrogen and phosphorus removal capability, and the average percentages of phosphorus uptake in ANO2 zone （ ηa ） increased with increasing ORP, i. e. , increasing from 12. 0% at - 143 mV to 22.0%,30.0%,37.0%, and45.0% at -123, -111, -105 and -95 mV, respectively; （2） the ORPopt as function of influent C/N ratio could be calculated by the equation： y ffi 252. 73e〈 -x/3.39） _ 131.01 ; the maximum percentage of phosphorus uptake in ANO2 as function of the ORPopt could be calculated by the equation： y ffi -0.49e（x/15.58） ＋ 1. 51. The ORPopt was the important process control parameter that must be optimized for operation of enhanced biological phosphorus removal （ EBPR ） system. Moreover, ORP sensor is very simple, and the industrial applications of this strategy is practical.

Deformation mechanism and NPR anchor cable truss coupling support in tunnel through fault fracture zone

To address the issue of extensive deformation in the Tabaiyi Tunnel caused by the fault zone,nuclear magnetic resonance(NMR)technology was employed to analyze the physical and mechanical properties of waterabsorbing mudstone.This analysis aimed to understand the mechanism behind the significant deformations.Drawing from the principle of excavation stress compensation,a support scheme featuring NPR anchorcables and an asymmetric truss support system was devised.To validate the scheme,numerical analysis using a combination of the Discrete Element Method(DEM)-Finite Element Method(FEM)was conducted.Additionally,similar material model tests and engineering measurements were carried out.Field experiments were also performed to evaluate the NPR anchor-cable and truss support system,focusing on anchor cable forces,pressures between the truss and surrounding rock,pressures between the initial support and secondary lining,as well as the magnitude of settlement and convergence deformation in the surrounding rock.The results indicate that the waterinduced expansion of clay minerals,resulting from damage caused by fissure water,accelerated the softening of the mudstone's internal structure,leading to significant deformations in the Tabaiyi Tunnel under high tectonic stress.The original support design fell short as the length of the anchor rods was smaller than the expansion depth of the plastic zone.As a result,the initial support structure bore the entire load from the surrounding rock,and a non-coupled deformation contact was observed between the double-arch truss and the surrounding rock.The adoption of NPR asymmetric anchor-cable support effectively restrained the expansion and asymmetric distribution characteristics of the plastic zone.Considering the mechanical degradation caused by water absorption in mudstone,the rigid constraint provided by the truss proved crucial for controlling the stability of the surrounding rock.These research findings hold significant implications for managing large deformations in soft rock tunnels situated within fractured zones under high tectonic stress conditions.

Grey relational analysis on the relation between marine environmental factors and oxidation-reduction potential

The effects of marine environmental factors-temperature （T）, dissolved oxygen （DO）, salinity （S） and pH--on the oxidation-reduction potential （ORP） of natural seawater were studied in laboratory. The results show an indistinct relationship between these four factors and the ORE but they did impact the ORP. Common mathematical methods were not applicable for describing the relationship. Therefore, a grey relational analysis （GRA） method was developed. The degrees of correlation were calculated according to GILA and the values of T, pH, DO and S were 0.744, 0.710, 0.692 and 0.690, respectively. From these values, the relations of these factors to the ORP could be described and evaluated, and those of T and pH were relatively major. In general, ORP is influenced by the synergic effect of T, DO, pH and S, with no single factor having an outstanding role.

Investigation of Oxidation-Reduction Properties of Growing Mediums for Cell Culture of Mammals under the Effect of Cosmo-Geophysical Factors

In model experiments were studied the effect of cosmo-geophysical factors of environment (hypomagnetic conditions during 2 days ≈ 1 mkT;electromagnetic irradiation (10 min - 2 MHz with amplitude 5 V/m and power 30 mkVt, background 2 - 4 mkVt), γ-quantum (10 min—from the source 137Cs) and its combined effect on the physic-chemical properties (ORP and pH) of growing medium for cell culture of mammals as nutrition medium 199 (PanEco, Russia). It was used a clear solution of medium (solution 1) and with the adding of 10% embryo bull serum—model of bio-medium (solution 2). Hypomagnetic conditions evoked the decreasing of ORP and pH value in both solutions, electromagnetic irradiation in the solution 1 which evoked the decreasing of ORP and the increasing of pH value, and in the solution 2, on the contrary, the increasing of ORP with the unchanging pH value. γ-radiation sharply decreased ORP value and didn’t change pH in solution 1, i.e. the reduction properties increased. There is insignificant increasing of ORP value and the decreasing of pH is noted in the solution 2, that it is characterized with the increasing of oxidative properties of solution. Under the combined effect of hypomagnetic conditions and electromagnetic irradiation, the values of investigating parameters in the solution 1 decreased and in the solution 2 increased. It was observed acute decreasing of ORP value in both solutions under the combined effect of hypomagnetic conditions and γ-radiation, i.e. the reductive properties of the solutions increased sharply. In this the concentration H+ significantly decreased, (p γ-radiation led to the decreasing of ORP and pH values in both solutions. Thus, the studying factors significantly change the oxidation-reduction properties of growing mediums. The investigation of the processes in biological mediums plays the important role in the assessment of environment effect during the flight in inter-planet space.

Correlations between silt density index,turbidity and oxidation-reduction potential parameters in seawater reverse osmosis desalination

The reverse osmosis method is one of the most widely used methods of seawater desalination at present.Hydrophilic and desalting membranes in reverse osmosis systems are highly susceptible to the input pollutants.Various contaminants,including suspended organic and inorganic matter,result in membrane fouling and membrane degradation.Fundamental parameters such as the turbidity,the amount of chlorine injection,and silt density index (SDI) are the most predominant parameters of fouling control in the membranes.In this study,the operation system included a water intake unit,a pretreatment system,and an RO system.The pretreatment system encompassed a clarifier,a gravity sand filter,pressurized sand filters,and a cartridge filter.The correlation between the amount of chlorine injection in terms of the oxidation-reduction potential (ORP) and the SDI value of the input water was investigated at a specified site next to the Persian Gulf.The results showed that,at certain intervals of inlet turbidity,injection of a certain amount of chlorine into the raw water has a distinct effect on the decrease of SDI.

A Study on the Mineralogical Features of the Oxidation-reduction of Graphite Deposit in Pingdu, Shandong

The mineralogical features of the oxidation-reduction of graphite deposit in pingdu, Shandong province were studied by field search, polarization microscope, X-ray diffraction (XRD) and SEM. The results show that, the major rocks of the reduction graphite zone are graphite-quartz anorthosite, gabbro. The major rocks of the oxidation graphite zone are marble with graphite, biotite granite, monzogranite. The main minerals of the reduction zone are plagioclase, pyroxene, quartz, pyrite. The graphite is aphanitic graphite appearing as dense massive, layered, spherical aggregates. The main minerals of the oxidation zone are calcite, quartz, K-feldspar, biotite, amphibole, chlorite. The graphite is flake graphite uniformly dispersed in the loose, and strongly erosion rocks. A large number of rocks in the area have been suffered chloritization, regional metamorphism, indicating that the formation of the graphite deposit should be related with gabbro melting. The carbon source in the lower part was taken into the mine, and then experienced regional metamorphism.

MICROSTRUCTURE OF REGENERATED HIGH DENSITY TUNGSTEN ALLOYS MADE BY OXIDATION-REDUCTION

The mechanical properties of regenerated W-alloys relating to the chemical purity and size of reclamation powders of 93W-Ni-Fe-Co(Mn)alloy chips,the structure of main constituents of the powders,as well as microstrueture and fractograph of regenerated W-alloys made by the reclamation powders,composition of W particle and binder phase,content,structure and distribution of main impurity elements have been studied by means of optical microscope, SEM,XRES.XRD,TEM,AES and chemical analysis.The feasibility of oxidation-reduc- tion process for reclamation and the possibility of praetical application of regenerated W-al- loys have been discussed.

Early Triassic Volcanic Rocks in the Western Yarlung Zangbo Suture Zone:Implications for the Opening of the Neo-Tethys Ocean

In this study,zircon U-Pb dating of volcanic rocks from the Zhongba ophiolite of the Yarlung Zangbo Suture Zone(YZSZ)in southern Xizang(Tibet)yielded an age of 247±3 Ma.According to whole rock geochemical and Sr-NdPb isotopic data,the Early Triassic samples could be divided into two groups:Group 1 with P-MORB affinity,showing initial^(87)Sr/^(86)Sr ratios of 0.70253–0.70602,ε_(Nd)(t)values of 4.2–5.3,(^(206)Pb/^(204)Pb)_(t)ratios of 16.353–18.222,(^(207)Pb/^(204)Pb)_(t)ratios of 15.454–15.564,and(^(208)Pb/^(204)Pb)_(t)ratios of 35.665–38.136;Group 2 with OIB affinity,showing initial^(87)Sr/^(86)Sr ratios of 0.70249–0.70513,ε_(Nd)(t)values of 4.4–4.9,(^(206)Pb/^(204)Pb)_(t)ratios of 17.140–18.328,(^(207)Pb/^(204)Pb)_(t)ratios of 15.491–15.575,and(^(208)Pb/^(204)Pb)_(t)ratios of 36.051–38.247.Group 2 rocks formed by partial melting of the mantle source enriched by a former plume,and assimilated continental crustal material during melt ascension.The formation of Group 1 rocks corresponds to the mixing of OIB melts,with the same components as Group 2 and N-MORBs.The Zhongba Early Triassic rocks belong to the continental margin type ophiolite and formed in the continental–oceanic transition zone during the initial opening of the Neo-Tethys in southern Xizang(Tibet).

Improving creep strength of the fine-grained heat-affected zone of novel 9Cr martensitic heat-resistant steel via modified thermo-mechanical treatment

The infamous type Ⅳ failure within the fine-grained heat-affected zone (FGHAZ) in G115 steel weldments seriously threatens the safe operation of ultra-supercritical (USC) power plants.In this work,the traditional thermo-mechanical treatment was modified via the replacement of hot-rolling with cold rolling,i.e.,normalizing,cold rolling,and tempering (NCT),which was developed to improve the creep strength of the FGHAZ in G115 steel weldments.The NCT treatment effectively promoted the dissolution of preformed M_(23)C_(6)particles and relieved the boundary segregation of C and Cr during welding thermal cycling,which accelerated the dispersed reprecipitation of M_(23)C_(6) particles within the fresh reaustenitized grains during post-weld heat treatment.In addition,the precipitation of Cu-rich phases and MX particles was promoted evidently due to the deformation-induced dislocations.As a result,the interacting actions between precipitates,dislocations,and boundaries during creep were reinforced considerably.Following this strategy,the creep rupture life of the FGHAZ in G115 steel weldments can be prolonged by 18.6%,which can further push the application of G115 steel in USC power plants.

Vibration Control of A Flexible Marine Riser System Subject to Input Dead Zone and Extraneous Disturbances

An observer-based adaptive backstepping boundary control is proposed for vibration control of flexible offshore riser systems with unknown nonlinear input dead zone and uncertain environmental disturbances.The control algorithm can update the control law online through real-time data to make the controller adapt to the environment and improve the control precision.Specifically,based on the adaptive backstepping framework,virtual control laws and Lyapunov functions are designed for each subsystem.Three direction interference observers are designed to track the timevarying boundary disturbance.On this basis,the inverse of the dead zone and linear state transformation are used to compensate for the original system and eliminate the adverse effects of the dead zone.In addition,the stability of the closed-loop system is proven by Lyapunov stability theory.All the system states are bounded,and the vibration offset of the riser converges to a small area of the initial position.Finally,four examples of flexible marine risers are simulated in MATLAB to verify the effectiveness of the proposed controller.

One-year results for myopia control of orthokeratology with different back optic zone diameters: a randomized trial using a novel multispectral-based topographer

AIM:To present the 1-year results of a prospective cohort study investigating the efficacy,potential mechanism,and safety of orthokeratology(ortho-k)with different back optic zone diameters(BOZD)for myopia control in children.METHODS:This randomized clinical study was performed between Dec.2020 and Dec.2021.Participants were randomly assigned to three groups wearing ortho-k:5 mm BOZD(5-MM group),5.5 mm BOZD(5.5-MM group),and 6 mm BOZD(6-MM group).The 1-year data were recorded,including axial length,relative peripheral refraction(RPR,measured by multispectral refractive topography,MRT),and visual quality.The contrast sensitivity(CS)was evaluated by CSV-1000 instrument with spatial frequencies of 3,6,12,and 18 cycles/degree(c/d);the corneal higher-order aberrations(HOAs)were measured by iTrace aberration analyzer.The one-way ANOVA was performed to assess the differences between the three groups.The correlation between the change in AL and RPR was calculated by Pearson’s correlation coefficient.RESULTS:The 1-year results of 20,21,and 21 subjects in the 5-MM,5.5-MM,and 6-MM groups,respectively,were presented.There were no statistical differences in baseline age,sex,or ocular parameters between the three groups(all P>0.05).At the 1-year visit,the 5-MM group had lower axial elongation than the 6-MM group(0.07±0.09 vs 0.18±0.11 mm,P=0.001).The 5-MM group had more myopic total RPR(TRPR,P=0.014),with RPR in the 15°–30°(RPR 15–30,P=0.015),30°–45°(RPR 30–45,P=0.011),temporal(RPR-T,P=0.008),and nasal area(RPR-N,P<0.001)than the 6-MM group.RPR 15–30 in the 5.5-MM group was more myopic than that in the 6-MM group(P=0.002),and RPR-N in the 5-MM group was more myopic than that in the 5.5-MM group(P<0.001).There were positive correlations between the axial elongation and the change in TRPR(r=0.756,P<0.001),RPR 15–30(r=0.364,P=0.004),RPR 30–45(r=0.306,P=0.016),and RPR-N(r=0.253,P=0.047).The CS decreased at 3 c/d(P<0.001),and the corneal HOAs increased in the 5-MM group(P=0.030).CONCLUSION:Ortho-k with 5 mm BOZD can control myopia progression more effectively.The mechanism may be associated with greater myopic shifts in RPR.

Determining the surface fault-rupture hazard zone for the Pazarcık segment of the East Anatolian fault zone through comprehensive analysis of surface rupture from the February 6,2023,Earthquake(Mw 7.7)

Following surface rupture observations in populated areas affected by the KahramanmaraşEarthquake(Mw 7.7)on February 6th,2023,along the Pazarcık segment of the East Anatolian Fault Zone(EAFZ),this study presents novel insights into physical criteria for delineating surface fault-rupture hazard zones(SRHZs)along ruptured strike-slip faults.To achieve this objective,three trench studies across the surface rupture were conducted on the Pazarcık segment of the EAFZ to collect field data,and earthquake recurrence intervals were interpreted using Bayesian statistics from previously conducted paleoseismological trenchings.The results of the proposed model indicate that the Pazarcık segment produced five significant surface-rupturing earthquakes in the last∼11 kyr:E1:11.13±1.74 kyr,E2:7.62±1.20 kyr,E3:5.34±1.05 kyr,E4:1.82±0.93 kyr,and E5:0.35±0.11 kyr.In addition,the recurrence intervals of destructive earthquakes on the subject in question range from 0.6 kyr to 4.8 kyr.Considering that the last significant earthquake occurred in 1513,the longest time since the most recent surface fault rupturing earthquake on this particular segment was 511 years.These results indicate that,in terms of the theoretical recurrence interval of earthquakes that can create surface ruptures on the Pazarcık segment,the period in which the February 6,2023,earthquake occurred was within the end of the expected return period.As a result,the potential for a devastating earthquake in the near future is not foreseen on the same fault.Finally,the SRHZ proposed for the Pazarcık section of Gölbaşıvillage was calculated as a 61-meter-wide offset on the fault lineament to reduce the negativities that may occur in the ruptured area in the future.It is recommended to take into account this width in the settlement of this area and nearby areas.

The Influence of the Closure of the East Paleo-Tethys Ocean on Southern South China:Evidences from Kinematics and^(40)Ar/^(39)Ar Geochronology of the Rongxian Ductile Shear Zone in Southeastern Guangxi

The Triassic was a crucial period in the tectonic evolution of the South China Block.Research on tectonic deformation during this period provides information on intracontinental orogenic mechanisms in South China.In this study,alongside thermochronological analyses,we examine the macroscopic and microscopic structural features of the Rongxian ductile shear zone,located south of the Darongshan granite in the southeastern part of Guangxi Province,on the southern margin of South China.Sinistral shear is indicated by the characteristics of rotatedσ-type feldspar porphyroclasts,stretching lineations defined by elongated quartz grains and the orientations of quartz c-axes.LA-ICP-MS U-Pb dating of zircons from two samples of granitic mylonite and one of granite yielded ages of ca.256 Ma.Furthermore,two samples of granitic mylonite yield muscovite^(40)Ar/^(39)Ar plateau ages of 249-246 Ma.These results indicate that the Rongxian ductile shear zone resulted from Early Triassic deformation of the late Permian Darongshan granite.This deformation was likely related to the closure of the eastern Paleo-Tethys Ocean and the subsequent collision of the South China and Indochina blocks,during the early stage of the Indosinian orogeny.

Extended finite element-based cohesive zone method for modeling simultaneous hydraulic fracture height growth in layered reservoirs

In this study,a fully coupled hydromechanical model within the extended finite element method(XFEM)-based cohesive zone method(CZM)is employed to investigate the simultaneous height growth behavior of multi-cluster hydraulic fractures in layered porous reservoirs with modulus contrast.The coupled hydromechanical model is first verified against an analytical solution and a laboratory experiment.Then,the fracture geometry(e.g.height,aperture,and area)and fluid pressure evolutions of multiple hydraulic fractures placed in a porous reservoir interbedded with alternating stiff and soft layers are investigated using the model.The stress and pore pressure distributions within the layered reservoir during fluid injection are also presented.The simulation results reveal that stress umbrellas are easily to form among multiple hydraulic fractures’tips when propagating in soft layers,which impedes the simultaneous height growth.It is also observed that the impediment effect of soft layer is much more significant in the fractures suppressed by the preferential growth of adjoining fractures.After that,the combined effect of in situ stress ratio and fracturing spacing on the multi-fracture height growth is presented,and the results elucidate the influence of in situ stress ratio on the height growth behavior depending on the fracture spacing.Finally,it is found that the inclusion of soft layers changes the aperture distribution of outmost and interior hydraulic fractures.The results obtained from this study may provide some insights on the understanding of hydraulic fracture height containment observed in filed.

Advances in seismological methods for characterizing fault zone structure

Large earthquakes frequently occur along complex fault systems.Understanding seismic rupture and long-term fault evolution requires constraining the geometric and material properties of fault zone structures.We provide a comprehensive overview of recent advancements in seismological methods used to study fault zone structures,including seismic tomography,fault zone seismic wave analysis,and seismicity analysis.Observational conditions limit our current ability to fully characterize fault zones,for example,insufficient imaging resolution to discern small-scale anomalies,incomplete capture of crucial fault zone seismic waves,and limited precision in event location accuracy.Dense seismic arrays can overcome these limitations and enable more detailed investigations of fault zone structures.Moreover,we present new insights into the structure of the Anninghe-Xiaojiang fault zone in the southeastern margin of the Qinghai-Xizang Plateau based on data collected from a dense seismic array.We found that utilizing a dense seismic array can identify small-scale features within fault zones,aiding in the interpretation of fault zone geometry and material properties.

Dynamic Identification and Evolution of Urban-suburban-rural Transition Zones Based on the Blender of Natural and Humanistic Factors: A Case Study of Chengdu, China

Urban-suburban-rural(U-S-R)zones exhibit distinctive transitional characteristics in interaction between human and nature.U-S-R transition zones(U-S-RTZ)are also highlighting the function diversity and landscape heterogeneity across territorial spaces.As a super megacity in western China,Chengdu’s rapid urbanization has driven the evolution of U-S-R spaces,resulting in a sequential structure.To promote the high-quality spatial development of urban-rural region in a structured and efficient manner,it is essential to con-duct a scientific examination of the multidimensional interconnection within the U-S-RTZ framework.By proposing a novel identifica-tion method of U-S-RTZ and taking Chengdu,China as a case study,grounded in a blender of natural and humanistic factors,this study quantitatively delineated and explored the spatial evolutions of U-S-RTZ and stated the optimization orientation and sustainable devel-opment strategies of the production-living-ecological spaces along the U-S-R gradients.The results show that:1)it is suitable for the quantitative analysis of U-S-RTZ by established three-dimensional identification system in this study.2)In 1990-2020,the urban-sub-urban transition zones(U-STZ)in Chengdu have continuously undergone a substantial increase,and the scale of the suburban-rural transition zones(S-RTZ)has continued to expand slightly,while the space of rural-ecological transition zones(R-ETZ)has noticeably compressed.3)The landuse dynamics within U-S-RTZ has gradually increased in 1990-2020.The main direction of landuse transition was from farmland to construction land or woodlands,with the expansion of construction land being the most significant.4)R-ETZ primarily focus on ecological functions,and there is a trade-off relationship between the production-ecological function within the S-RTZ,and in the U-STZ,production-living composite functions are prioritized.This study emphasizes the importance of elastic planning and precise governance within the U-S-RTZ in a rapid urbanization region,particularly highlighting the role of suburbs as landscape corridors and service hubs in urban-rural integration.It elucidates to the practical implications for achieving high-quality development of integrated U-S-R territorial spaces.

Adaptive Integrated Coastal Zone Planning:History,Challenges,Advances,and Perspectives

Coastal zones are dynamic,rich environments,now densely populated,and increasingly challenged by human and climatechange pressures.Effective long-term integrated coastal zone planning is needed to ensure sustainable environmental protection and economic development.In this study,we reviewed the history of coastal zone planning since its birth in the 1950s based on the literature retrieved from the Web of Science(Core Collection)from 2000–2023,then summarized the tools and spatial allocation methods commonly used in the planning process,and finally proposed potential solutions to the challenges faced.The results show that after decades of development,coastal zone planning has changed from a decentralized activity to a targeted and integrated one,with an increasing emphasis on the ecosystem approach and the use of multiple planning tools.Spatial analysis techniques and environmental modelling software have become increasingly popular.Linear programming and overlay analysis are common approaches when performing spatial optimization,but land-sea interactions and planning in the marine parts still lack in-depth analysis and practical experience.We are also aware that the challenges posed by the integration of administrative hierarchies,scoping and conservation objectives,stakeholder participation,consideration of social dimensions,and climate change are pervasive throughout the planning process.There is an urgent need to develop more flexible and accurate spatial modelling tools,as well as more efficient participatory methods,and to focus on the holistic nature of the land-sea system to create more resilient and sustainable coastal zones.

Marginal zone lymphoma with severe rashes: A case report

BACKGROUND Marginal zone lymphoma(MZL)is an indolent subtype of non-Hodgkin lymphoma(NHL),which is rare clinically with severe rashes as the initial symptom.CASE SUMMARY This study reports a case of MZL with generalized skin rashes accompanied by pruritus and purulent discharge.First-line treatment with rituximab combined with zanubrutinib had poor effects.However,after switching to obinutuzumab combined with zanubrutinib,the case was alleviated,and the rashes disappeared.CONCLUSION For patients with advanced stage MZL not benefiting from type I anti-CD20 monoclonal antibody(mAb)combination therapy,switching to a type II anti-CD20 mAb combination regimen may be considered.This approach may provide a new perspective in the treatment of MZL.

Formation mechanism of fault accommodation zones under combined stress in graben basin:Implications from geomechanical modeling

A fault accommodation zone is a type of structure that is defined as regulating displacement and strain between faults structure.Increasing numbers of fault accommodation zones are being identified in graben basins,indicating the potential exploration target and petroleum accumulation areas.This study aims to analyze the formation mechanism and development of fault accommodation zones under combined stress by a numerical simulation method considering geomechanical modeling.Using three-dimensional(3-D)seismic interpretation and fractal dimension method,exampled with the Dongxin fault zone,the fault activity and fault combination pattern were conducted to quantitatively characterize the activity difference in fault accommodation zones.Combined with mechanical experiment test,a geomehcanical model was established for fault accommodation zones in a graben basin.Integrating the paleostress numerical simulations and structural physical simulation experiment,the developmental characteristics and genetic mechanism of fault accommodation zones were summarized.Influenced by multi movements and combined stresses,three significant tectonic evolution stages of the Dongxing Fault Zone(DXFZ)were distinguished:During the E_(s)^(3)sedimentary period,the large difference in the stress,strain,and rupture distribution in various faults were significant,and this stage was the key generation period for the prototype of the DXFZ,including the FAZ between large-scale faults.During the E_(s)^(2)sedimentary period,the EW-trending symmetric with opposite dipping normal faults and the NE-SW trending faults with large scale were furtherly developed.The junction area of two secondary normal faults were prone to be ruptured,performing significant period for inheriting and developing characteristics of fault accommodation zones.During the Es1 sedimentary period,the high-order faults in the DXFZ exhibited the obvious fault depressions and strike-slip activity,and the fault accommodation zones were furtherly inherited and developed.This stage was the molded and formative period of the FAZ,the low-order faults,and the depression in the DXFZ.

Kink-band Kinematic Analysis and its Implications for Late-stage Deformation in the Internal Parts of the Zagros Collision(Sanandaj–Sirjan Zone) in West Iran

In the internal parts of the Zagros collision zone, several deformation phases have been superimposed. The early deformation phase caused the development of a penetrative foliation. The late-stage deformation phase was preferentially accommodated within shear zones and caused the generation of shear bands, implying a non-coaxial component of deformation, the end of this stage deformation was marked by the development of kink-bands. In the vicinity of Zagros suture zone, the kink angle increased from 40° to 60°, and the kink-bands was converted to chevron folds. In this region, the external(α) and internal(β) angular ratio is α/β ≠ 1 and kink angle increased, and deformation occurred with 10% to 30% volume loss. Farther from the suture zone in the east, α/β = 1;and total volume was constant or increased by 5% to 10%. Kink-bands kinematic analysis in the study area revealed this structures were sensitive to deformation conditions and components such that, with decreasing distance to the Zagros suture zone, shearing and rotation increased, a high kinematic vorticity dominated, and volume loss occurred during deformation.