期刊文献+
共找到176,709篇文章
< 1 2 250 >
每页显示 20 50 100
SiO_(2)@GO杂化膜的制备及其渗透汽化脱盐性能研究
1
作者 展侠 杨雨均 +1 位作者 聂明雪 高仲勇 《化工新型材料》 CAS CSCD 北大核心 2024年第7期93-97,103,共6页
以渗透汽化膜法脱盐为研究背景,针对目前氧化石墨烯膜(GOM)易溶胀、稳定性差和渗透通量衰减等缺点,采用疏水、亲水、原位合成方法制备了3种纳米二氧化硅(SiO_(2))对GOM进行插层修饰,进而制备SiO_(2)@氧化石墨烯(SiO_(2)@GO)膜。通过傅... 以渗透汽化膜法脱盐为研究背景,针对目前氧化石墨烯膜(GOM)易溶胀、稳定性差和渗透通量衰减等缺点,采用疏水、亲水、原位合成方法制备了3种纳米二氧化硅(SiO_(2))对GOM进行插层修饰,进而制备SiO_(2)@氧化石墨烯(SiO_(2)@GO)膜。通过傅里叶红外变换光谱仪(FT-IR)、扫描电子显微镜(SEM)、X射线衍射仪(XRD)、接触角测量仪等方法表征其化学组分、形貌、晶体结构和亲水性。渗透汽化脱盐实验表明,疏水性SiO_(2)@GO杂化膜脱盐性能优于亲水性SiO_(2)@GO和原位制备SiO_(2)@GO膜,且当SiO_(2)与GO质量比为0.2时,疏水性SiO_(2)@GO杂化膜水通量可达103.4kg/(m^(2)·h),盐截留率为99.8%(70℃,3.5%NaCl溶液),在连续12h测试中分离性能保持稳定,表明疏水性SiO_(2)@GO杂化膜在渗透汽化脱盐领域有着广阔的应用前景。 展开更多
关键词 二氧化硅 氧化石墨烯 杂化膜 渗透汽化 脱盐
下载PDF
Layered Potassium Titanium Niobate/Reduced Graphene Oxide Nanocomposite as a Potassium‑Ion Battery Anode 被引量:2
2
作者 Charlie A.F.Nason Ajay Piriya Vijaya Kumar Saroja +3 位作者 Yi Lu Runzhe Wei Yupei Han Yang Xu 《Nano-Micro Letters》 SCIE EI CAS CSCD 2024年第1期1-16,共16页
With graphite currently leading as the most viable anode for potassium-ion batteries(KIBs),other materials have been left relatively underexamined.Transition metal oxides are among these,with many positive attributes ... With graphite currently leading as the most viable anode for potassium-ion batteries(KIBs),other materials have been left relatively underexamined.Transition metal oxides are among these,with many positive attributes such as synthetic maturity,longterm cycling stability and fast redox kinetics.Therefore,to address this research deficiency we report herein a layered potassium titanium niobate KTiNbO5(KTNO)and its rGO nanocomposite(KTNO/rGO)synthesised via solvothermal methods as a high-performance anode for KIBs.Through effective distribution across the electrically conductive rGO,the electrochemical performance of the KTNO nanoparticles was enhanced.The potassium storage performance of the KTNO/rGO was demonstrated by its first charge capacity of 128.1 mAh g^(−1) and reversible capacity of 97.5 mAh g^(−1) after 500 cycles at 20 mA g^(−1),retaining 76.1%of the initial capacity,with an exceptional rate performance of 54.2 mAh g^(−1)at 1 A g^(−1).Furthermore,to investigate the attributes of KTNO in-situ XRD was performed,indicating a low-strain material.Ex-situ X-ray photoelectron spectra further investigated the mechanism of charge storage,with the titanium showing greater redox reversibility than the niobium.This work suggests this lowstrain nature is a highly advantageous property and well worth regarding KTNO as a promising anode for future high-performance KIBs. 展开更多
关键词 Potassium-ion batteries INTERCALATION Transition metal oxides Anodes NANOCOMPOSITE
下载PDF
Phase-engineering modulation of Mn-based oxide cathode for constructing super-stable sodium storage 被引量:1
3
作者 Quanqing Zhao Ruru Wang +5 位作者 Ming Gao Bolin Liu Jianfeng Jia Haishun Wu Youqi Zhu Chuanbao Cao 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第1期421-427,I0010,共8页
The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by ... The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by the sluggish Na^(+)kinetics and the phase transitions upon cycling.Herein,we establish the thermodynamically stable phase diagram of various Mn-based oxide composites precisely controlled by sodium content tailoring strategy coupling with co-doping and solid-state reaction.The chemical environment of the P2/P'3 and P2/P3 biphasic composites indicate that the charge compensation mechanism stems from the cooperative contribution of anions and cations.Benefiting from the no phase transition to scavenge the structure strain,P2/P'3 electrode can deliver long cycling stability(capacity retention of 73.8%after 1000 cycles at 10 C)and outstanding rate properties(the discharge capacity of 84.08 mA h g^(-1)at 20 C)than P2/P3 electrode.Furthermore,the DFT calculation demonstrates that the introducing novel P'3 phase can significantly regulate the Na^(+)reaction dynamics and modify the local electron configuration of Mn.The effective phase engineering can provide a reference for designing other high-performance electrode materials for Na-ion batteries. 展开更多
关键词 Sodium ion battery oxide cathode Phase engineering Phase diagram Na~+kinetic
下载PDF
PEO/rGO复合电热膜的制备及电热性能研究
4
作者 张丽辉 郭锐 +3 位作者 刘亚宁 王冰佳 童博 夏阳 《化工新型材料》 CAS CSCD 北大核心 2024年第6期83-88,93,共7页
采用导电性能优异的还原氧化石墨烯(rGO)为导电填料,以高分子聚合物聚氧化乙烯(PEO)为粘结剂,以N-甲基-2-吡咯烷酮(NMP)为溶剂配制成导电浆料,通过刮涂法高温固化得到聚氧化乙烯/还原氧化石墨烯(PEO/rGO)复合电热膜。通过X射线衍射仪、... 采用导电性能优异的还原氧化石墨烯(rGO)为导电填料,以高分子聚合物聚氧化乙烯(PEO)为粘结剂,以N-甲基-2-吡咯烷酮(NMP)为溶剂配制成导电浆料,通过刮涂法高温固化得到聚氧化乙烯/还原氧化石墨烯(PEO/rGO)复合电热膜。通过X射线衍射仪、扫描电子显微镜、傅里叶变换红外光谱仪对复合电热膜进行分析表征,并测试了其电学特性和电加热性能。结果表明:PEO/rGO复合电热膜的方阻随着rGO含量的增加而逐渐下降,且方阻的下降速度由快到慢;PEO/rGO复合电热膜的升温速度随着导电填料rGO含量的增加逐渐变缓;当rGO含量较多、PEO含量较少时,会造成升温速率下降,也会造成电热平台不稳定;当rGO质量分数为20%时,在施加18V直流电压下复合电热膜可快速升温至43℃,并且表现出平稳的电热平台和较高的电加热效率,能够满足低温高效率复合电热膜的使用要求。 展开更多
关键词 聚氧化乙烯 还原氧化石墨烯 电热膜 复合材料
下载PDF
Green synthesis of three-dimensional magnesium ferrite/titanium dioxide/reduced graphene from Garcinia mangostana extract for crystal violet photodegradation and antibacterial activity
5
作者 Tong Hoang Lin Che Quang Cong +10 位作者 Nguyen Thanh Hoai Nam Hoang An Nguyen Duy Hai Ton That Buu Thoi Le Nhat Binh Hoang Le Minh Lam Thanh Ngan Hoang Thuy Kim Ngan Du Chi Vi Ta Dang Khoa Nguyen Huu Hieu 《Journal of Semiconductors》 EI CAS CSCD 2023年第12期111-124,共14页
In this study,three-dimensional porous magnesium ferrite/titanium dioxide/reduced graphene oxide(Mg Fe_2O_(4)-GM/TiO_(2)/rGO(MGTG))was successfully synthesized via green and hydrothermal-supported co-precipitation met... In this study,three-dimensional porous magnesium ferrite/titanium dioxide/reduced graphene oxide(Mg Fe_2O_(4)-GM/TiO_(2)/rGO(MGTG))was successfully synthesized via green and hydrothermal-supported co-precipitation methods using the extract of Garcinia mangostana(G.mangostana)as a reducing agent.The characterization results indicate the successful formation of the nano/micro Mg Fe_(2)O_(4)(MFO)and TiO_(2) on the structure of the reduced graphene oxide(rGO),which can also act as efficient support,alleviating the agglomeration of the nano/micro MFO and TiO_(2).The synergic effects of the adsorption and photodegradation activity of the material were investigated according to the removal of crystal violet(CV)under ultraviolet light.The effects of catalyst dosage,CV concentration,and p H on the CV removal efficiency of the MGTG were also investigated.According to the results,the CV photodegradation of the MGTG-200 corresponded to the pseudo-first-order kinetic model.The reusability of the material after 10 cycles also showed a removal efficiency of 92%.This happened because the materials can easily be recollected using external magnets.In addition,according to the effects of different free radicals·O_(2)^(-),h^(+),and·OH on the photodegradation process,the photocatalysis mechanism of the MGTG was also thoroughly suggested.The antibacterial efficiency of the MGTG was also evaluated according to the inhibition of the Gram-positive bacteria strain Staphylococcus aureus(S.aureus).Concurrently,the antibacterial mechanism of the fabricated material was also proposed.These results confirm that the prepared material can be potentially employed in a wide range of applications,including wastewater treatment and antibacterial activity. 展开更多
关键词 magnesium ferrite titanium dioxide reduced graphene oxide Garcinia mangostana PHOTODEGRADATION ANTIBACTERIAL
下载PDF
Gold/Mg-Al mixed oxides catalysts for oxidative esterification of methacrolein:Effects of support size and composition on gold loading
6
作者 Wangtao Li Qiancheng Zheng +2 位作者 Huayu Zhang Yunsheng Dai Zhengbao Wang 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第12期128-138,共11页
Gold catalysts supported on Mg-Al mixed oxides for oxidative esterification of methacrolein are prepared by impregnation.Effects of the support particle size,concentration of HAuCl4 solution and Mg/Al ratio on gold lo... Gold catalysts supported on Mg-Al mixed oxides for oxidative esterification of methacrolein are prepared by impregnation.Effects of the support particle size,concentration of HAuCl4 solution and Mg/Al ratio on gold loading and catalytic properties are investigated.The catalysts are characterized by CO_(2)-TPD,EDS,XPS,STEM and XRD techniques.Catalysts with smaller support particle size show more uniform gold distribution and higher gold dispersion,resulting in a higher catalytic performance,and the uniformity of gold and the activity of the catalysts with larger support particle size can be improved by decreasing the concentration of HAuCl4 solution.The Mg/Al molar ratio has significant effect on the uniformity of gold and the activity of the catalyst,and the optimum Mg/Al molar ratio is 0.1–0.2.This study underlines the importance of engineering support particle size,concentration of HAuCl4 solution and density of adsorption sites for efficient gold loading on support by impregnation. 展开更多
关键词 gold catalysts Oxidative esterification Support particle size effect Mass transfer DISTRIBUTIONS Optimization
下载PDF
Boosting oxygen reduction activity and CO_(2) resistance on bismuth ferrite-based perovskite cathode for low-temperature solid oxide fuel cells below 600℃ 被引量:1
7
作者 Juntao Gao Zhiyun Wei +5 位作者 Mengke Yuan Zhe Wang Zhe Lü Qiang Li Lingling Xu Bo Wei 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第3期600-609,I0013,共11页
Developing efficient and stable cathodes for low-temperature solid oxide fuel cells(LT-SOFCs) is of great importance for the practical commercialization.Herein,we propose a series of Sm-modified Bi_(0.7-x)Sm_xSr_(0.3)... Developing efficient and stable cathodes for low-temperature solid oxide fuel cells(LT-SOFCs) is of great importance for the practical commercialization.Herein,we propose a series of Sm-modified Bi_(0.7-x)Sm_xSr_(0.3)FeO_(3-δ) perovskites as highly-active catalysts for LT-SOFCs.Sm doping can significantly enhance the electrocata lytic activity and chemical stability of cathode.At 600℃,Bi_(0.675)Sm_(0.025)Sr_(0.3)FeO_(3-δ)(BSSF25) cathode has been found to be the optimum composition with a polarization resistance of 0.098 Ω cm^2,which is only around 22.8% of Bi_(0.7)Sr_(0.3)FeO_(3-δ)(BSF).A full cell utilizing BSSF25 displays an exceptional output density of 790 mW cm^(-2),which can operate continuously over100 h without obvious degradation.The remarkable electrochemical performance observed can be attributed to the improved O_(2) transport kinetics,superior surface oxygen adsorption capacity,as well as O_(2)p band centers in close proximity to the Fermi level.Moreover,larger average bonding energy(ABE) and the presence of highly acidic Bi,Sm,and Fe ions restrict the adsorption of CO_(2) on the cathode surface,resulting in excellent CO_(2) resistivity.This work provides valuable guidance for systematic design of efficient and durable catalysts for LT-SOFCs. 展开更多
关键词 Low-temperature solid oxide fuel cell Perovskite cathode DFT calculations CO_(2) tolerance
下载PDF
基于rGO-AuNPS修饰丝网印刷电极的电化学生物传感器快速检测甲基对硫磷 被引量:2
8
作者 耿俊豪 李雪芝 +1 位作者 周建平 陈昌华 《食品与机械》 CSCD 北大核心 2024年第1期47-54,共8页
目的:实现对甲基对硫磷的快速检测。方法:基于金纳米颗粒和还原氧化石墨烯制备了用于对甲基对硫磷进行定量检测的乙酰胆碱酯酶传感器。采用层层组装方法,将还原氧化石墨烯、金纳米颗粒、乙酰胆碱酯酶依次修饰在丝网印刷电极表面。对传... 目的:实现对甲基对硫磷的快速检测。方法:基于金纳米颗粒和还原氧化石墨烯制备了用于对甲基对硫磷进行定量检测的乙酰胆碱酯酶传感器。采用层层组装方法,将还原氧化石墨烯、金纳米颗粒、乙酰胆碱酯酶依次修饰在丝网印刷电极表面。对传感器的催化活性、阻抗特性、传感器的抑制率与甲基对硫磷浓度的关系、实际样品检测进行了评估。结果:制备的乙酰胆碱酯酶生物传感器对乙酰硫代胆碱氯化物表现出优异的亲和力,米氏常数为2.76 mmol/L。在最佳条件下,可以有效检测甲基对硫磷,线性范围为5~500 ng/mL,检出限为0.692 ng/mL。结论:该方法操作简单、成本低、稳定性好,适用于有机磷类农药的快速检测。 展开更多
关键词 生物传感器 丝网印刷电极 甲基对硫磷 还原氧化石墨烯 纳米金
下载PDF
磷酸在GO插层阶段的功能化调控及机理
9
作者 王佳瑞 李春丽 +3 位作者 程佳豪 郝亚玲 周楠 杨鹏 《高等学校化学学报》 SCIE EI CSCD 北大核心 2024年第1期61-71,共11页
针对氧化石墨烯(GO)制备过程中插层阶段的调控及机理研究对GO功能化应用于电极材料具有重要的研究意义.本文在改进Hummers法的基础上,向H_(2)SO_(4)插层剂中加入不同体积的H_(3)PO_(4),制备了不同氧化程度的GO.利用扫描电子显微镜(SEM)... 针对氧化石墨烯(GO)制备过程中插层阶段的调控及机理研究对GO功能化应用于电极材料具有重要的研究意义.本文在改进Hummers法的基础上,向H_(2)SO_(4)插层剂中加入不同体积的H_(3)PO_(4),制备了不同氧化程度的GO.利用扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和傅里叶变换红外光谱(FTIR)等表征手段,分析了不同氧化程度的GO的微观形貌、元素组成、氧化程度,以探究H_(3)PO_(4)在插层石墨过程中的作用机理;并采用循环伏安法(CV)和交流阻抗法(EIS)对不同H_(2)SO_(4)/H_(3)PO_(4)体积比下的GO进行电化学性能测试,分析了H_(3)PO_(4)对GO电化学性能的影响,以达到调控石墨的插层氧化从而提升GO导电性的目的.结果表明,单一的H_(2)SO_(4)使GO基面上的邻位二醇过度氧化造成孔洞,H_(3)PO_(4)的加入会扩大石墨层间距,使氧化剂更易进入石墨层间,并与1,2-二醇反应生成环状结构以起到保护基面的作用,从而提高GO的导电性.H_(3)PO_(4)作为辅助酸会协助H_(2)SO_(4)制备基面更加完整且氧化程度更高的GO,但其酸性较弱,不可完全代替H_(2)SO_(4)在氧化过程中的作用. 展开更多
关键词 氧化石墨烯 磷酸插层 机理研究 电化学 化学反应 部分氧化
下载PDF
Electrochemical response of MgO/Co_(3)O_(4) oxide layers produced by plasma electrolytic oxidation and post treatment using cobalt nitrate
10
作者 Mosab Kaseem Tehseen Zehra +2 位作者 Tassawar Hussain Young Gun Ko Arash Fattah-alhosseini 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2023年第3期1057-1073,共17页
This work looked into the influence of the sealing treatment on the structural feature and electrochemical response of AZ31 Mg alloy coated via plasma electrolytic oxidation(PEO).Here,the inorganic layers produced by ... This work looked into the influence of the sealing treatment on the structural feature and electrochemical response of AZ31 Mg alloy coated via plasma electrolytic oxidation(PEO).Here,the inorganic layers produced by PEO in an alkaline-phosphate electrolyte were subsequently immersed for different periods in cold(60°C)and hot(100°C)aqueous solutions containing either 1 or 3 gr of cobalt nitrate hexahydrate in the presence of hydrogen peroxide as an initiator.The results showed that the sealing treatments in the hot solutions could trigger the hydration reactions of PEO coating which would largely assist the surface incorporation of Co_(3)O_(4)into the coating.In contrast,the sealing in cold solutions led to less compact coatings,which was attributed to the fact the hydration reactions would be restricted at 60°C.A nearly fully sealed coating with a porosity of~0.5%was successfully formed on the sample immersed in the hot solution containing 1 gr of cobalt nitrate hexahydrate.Thus,the electrochemical stability of this fully sealed coating was superior to the other samples as it had the lowest corrosion current density(4.71×10^(-10)A·cm^(-2))and the highest outer layer resistance(3.81×10^(7)Ω·cm^(2)).The composite coatings developed in this study are ideal for applications requiring high electrochemical stability. 展开更多
关键词 AZ31 Mg alloy Plasma electrolytic oxidation Co_(3)O_(4) HYDRATION Corrosion
下载PDF
Aggregation-regulated bioreduction process of graphene oxide by Shewanella bacteria
11
作者 Kaixin Han Yibo Zeng +2 位作者 Yinghua Lu Ping Zeng Liang Shen 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2024年第5期56-62,共7页
The bioreduction of graphene oxide(GO)using environmentally functional bacteria such as Shewanella represents a green approach to produce reduced graphene oxide(rGO).This process differs from the chemical reduction th... The bioreduction of graphene oxide(GO)using environmentally functional bacteria such as Shewanella represents a green approach to produce reduced graphene oxide(rGO).This process differs from the chemical reduction that involves instantaneous molecular reactions.In bioreduction,the contact of bacterial cells and GO is considered the rate-limiting step.To reveal how the bacteria-GO integration regulates rGO production,the comparative experiments of GO and three Shewanella strains were carried out.Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,Raman spectroscopy,and atomic force microscopy were used to characterize the reduction degree and the aggregation degree.The results showed that a spontaneous aggregation of GO and Shewanella into the condensed entity occurred within 36 h.A positive linear correlation was established,linking three indexes of the aggregation potential,the bacterial reduction ability,and the reduction degree(ID/IG)comprehensively. 展开更多
关键词 Graphene oxide Reduced graphene oxide BIOREDUCTION AGGREGATION SHEWANELLA
下载PDF
微弧氧化后Mg-8Li合金表面MgLiAlY-LDHs@GO膜层的生长及耐蚀性能
12
作者 周岩 吴量 +8 位作者 汪安 汪瑞俊 姚文辉 袁媛 谢治辉 张欣怡 吴嘉豪 陈勇花 潘复生 《表面技术》 EI CAS CSCD 北大核心 2024年第9期22-33,74,共13页
目的提高Mg-8Li合金的耐蚀性能。方法首先在Mg-8Li合金表面制备微弧氧化膜(MAO),然后使用原位水热法在微弧氧化膜表面原位生长掺杂氧化石墨烯(GO)的四元(MgLiAlY)层状双羟基金属氧化物(LDHs)智能自修复膜层。采用SEM、XRD、FT-IR、EDS、... 目的提高Mg-8Li合金的耐蚀性能。方法首先在Mg-8Li合金表面制备微弧氧化膜(MAO),然后使用原位水热法在微弧氧化膜表面原位生长掺杂氧化石墨烯(GO)的四元(MgLiAlY)层状双羟基金属氧化物(LDHs)智能自修复膜层。采用SEM、XRD、FT-IR、EDS、ICP等手段研究MgLiAlY-LDHs@GO膜层的形貌、结构以及成分。通过EIS、Tafel以及浸泡试验等研究膜层的耐蚀性能,分析膜层的腐蚀行为,阐释其耐蚀机理。结果GO的掺杂可以促使LDHs纳米片生长得更加致密,主体层板中具有缓蚀作用的Y3+可以提高涂层的耐蚀性,四元LDHs的生长所需要的Mg^(2+)、Li^(+)、Al^(3+)等离子来源于镁锂合金基体以及微弧氧化膜的溶解,其中Li+也可以促进LDHs纳米片生长得更为均匀细密。膜层的腐蚀电流密度为6.03×10^(–7)A/cm^(2),比MAO膜层降低了1个数量级,提高了镁锂合金的耐蚀性能。结论GO的负载使LDHs的耐蚀性能和膜层稳定性均有一定程度的提升,引入稀土元素Y会改变LDHs的骨架,造成晶格畸变,使得LDHs微观形貌呈现褶皱状,剩下部分以Y(OH)3形式存在于涂层表面,可进一步提高膜层的耐蚀性能和稳定性。 展开更多
关键词 镁锂合金 微弧氧化 层状双羟基金属氧化物 氧化石墨烯 耐蚀性能 自修复膜层
下载PDF
Preparation of Manganese Oxide and Its Adsorption Properties
13
作者 贺跃 王海峰 +4 位作者 YANG Pan WANG Song CHEN Xiaoliang YANG Chunyuan 王家伟 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2024年第4期1031-1040,共10页
The in-situ oxidation of manganese sulfate solution with H2O_(2),sodium hypochlorite,potassium permanganate and oxygen as oxidants was investigated by means of SEM,EDS,XRD,BET and infrared analysis,and the effects of ... The in-situ oxidation of manganese sulfate solution with H2O_(2),sodium hypochlorite,potassium permanganate and oxygen as oxidants was investigated by means of SEM,EDS,XRD,BET and infrared analysis,and the effects of different oxidants on the morphology,phase composition,surface properties and specific surface area of manganese oxides were investigated.The experimental results show that the diameter of manganese oxide particles prepared with H_(2)O_(2)is the smallest,about 50 nm,and the specific surface area is the largest,63.8764 m^(2)/g.It has the advantages of abundant surface hydroxyl groups,no introduction of other impurities and large adsorption potential.It is most suitable to be used as an oxidant for oxidizing manganese sulfate solution to prepare manganese oxide by in-situ oxidation.Nano manganese oxide prepard by H_(2)O_(2)in-situ oxidation method is used as adsorbent to adsorb cobalt and nickel impurities in manganese sulfate.When the reaction pH is 6,the reaction time is 30min and the amount of adsorbent is 1.0 g,the adsorption rates of cobalt and nickel impurities in 100ml manganese sulfate solution are 97.59%and 97.67%,respectively.The residual amounts of cobalt and nickel meet the industrial process standard of first-class products(Co,Ni w/%≤0.005)of high-purity manganese sulfate(Hg/t4823-2015)for batteries.The study plays a guiding role in the preparation and regulation of manganese oxide,and provides a new method with high efficiency,purity and adsorbent availability for the preparation of high-purity manganese sulfate solution. 展开更多
关键词 manganese oxide in situ oxidation ADSORBENT regulation mechanism PHYSICAL chemical properties
下载PDF
Nano-GO-ZnO/CeO_(2)在水性聚氨酯涂料中的性能研究
14
作者 黎泓麟 闫玉玲 李丽华 《石油化工高等学校学报》 CAS 2024年第1期66-73,共8页
对水性聚氨酯(WPU)涂料进行改性可以实现其功能化改进,将纳米复合粒子添加至WPU涂料中,可提升其力学性能及抗紫外能力。采用改进的Hummers法制备了氧化石墨烯(GO),共沉淀法制备了nano-ZnO/CeO_(2),原位聚合法合成了nano-GO-ZnO/CeO_(2)... 对水性聚氨酯(WPU)涂料进行改性可以实现其功能化改进,将纳米复合粒子添加至WPU涂料中,可提升其力学性能及抗紫外能力。采用改进的Hummers法制备了氧化石墨烯(GO),共沉淀法制备了nano-ZnO/CeO_(2),原位聚合法合成了nano-GO-ZnO/CeO_(2);对制备的样品进行FT-IR、XRD、TEM、SEM等表征,探究了nano-GO-ZnO/CeO_(2)的掺杂对WPU性能的影响。结果表明,nano-GO-ZnO/CeO_(2)是由六方纤碎矿结构的ZnO和立方晶型萤石结构的CeO_(2)形成的杂化粒子负载于GO表面组成的;与纯WPU膜相比,添加质量分数为0.6%的nano-GOZnO/CeO_(2),WPU膜的断裂拉伸强度和断裂拉伸率分别提高了43.1%和47.0%;经过168 h的紫外光老化实验后,改性膜的吸水率为15.4%,断裂拉伸强度和断裂拉伸率分别提高了328.0%、39.0%。由此可知,nano-GO-ZnO/CeO_(2)可以有效提高WPU成膜后的力学性能和抗紫外老化性能。 展开更多
关键词 氧化石墨烯 氧化锌 氧化铈 水性聚氨酯 紫外屏蔽 力学性能
下载PDF
PVDF/GO-ZnO光催化复合平板膜的制备及其性能
15
作者 王侠轶 赵小军 +2 位作者 张东东 王连欢 赵义平 《塑料工业》 CAS CSCD 北大核心 2024年第4期130-136,共7页
为有效解决纳米催化剂光催化后的回收困难问题,本文以聚偏氟乙烯(PVDF)为基质膜,以亲水性的光催化剂氧化石墨烯(GO)/氧化锌(ZnO)为添加剂,通过相转化法(NIPS)制备出具有自清洁功能的PVDF/GO-ZnO光催化复合平板膜,并对其结构及光催化性... 为有效解决纳米催化剂光催化后的回收困难问题,本文以聚偏氟乙烯(PVDF)为基质膜,以亲水性的光催化剂氧化石墨烯(GO)/氧化锌(ZnO)为添加剂,通过相转化法(NIPS)制备出具有自清洁功能的PVDF/GO-ZnO光催化复合平板膜,并对其结构及光催化性能进行了系统研究。与纯PVDF膜相比,PVDF/GO-ZnO光催化平板膜的孔径增加,使其亲水性和水通量显著提高。其中,GO-ZnO掺杂量为1.26%的PVDF/GO-ZnO光催化复合平板膜M-4的纯水通量高达153.73 L/(m^(2)·h),纯水接触角最小为77°。在模拟太阳光照射80 min时,该光催化复合平板膜对甲基蓝(MB)的降解效率高达98.79%。此外,该光催化平板膜3次循环降解染料后的光催化降解效率仍高达93.60%,且在不同酸碱性的染料溶液中依旧保持良好的光催化降解效果,在工业处理印染废水中显示出很好的应用前景。 展开更多
关键词 聚偏氟乙烯 氧化锌 氧化石墨烯 光催化 降解
下载PDF
The emerging role of nitric oxide in the synaptic dysfunction of vascular dementia
16
作者 Xiaorong Zhang Zhiying Chen +3 位作者 Yinyi Xiong Qin Zhou Ling-Qiang Zhu Dan Liu 《Neural Regeneration Research》 SCIE CAS 2025年第2期402-415,共14页
With an increase in global aging,the number of people affected by cerebrovascular diseases is also increasing,and the incidence of vascular dementia-closely related to cerebrovascular risk-is increasing at an epidemic... With an increase in global aging,the number of people affected by cerebrovascular diseases is also increasing,and the incidence of vascular dementia-closely related to cerebrovascular risk-is increasing at an epidemic rate.However,few therapeutic options exist that can markedly improve the cognitive impairment and prognosis of vascular dementia patients.Similarly in Alzheimer’s disease and other neurological disorders,synaptic dysfunction is recognized as the main reason for cognitive decline.Nitric oxide is one of the ubiquitous gaseous cellular messengers involved in multiple physiological and pathological processes of the central nervous system.Recently,nitric oxide has been implicated in regulating synaptic plasticity and plays an important role in the pathogenesis of vascular dementia.This review introduces in detail the emerging role of nitric oxide in physiological and pathological states of vascular dementia and summarizes the diverse effects of nitric oxide on different aspects of synaptic dysfunction,neuroinflammation,oxidative stress,and blood-brain barrier dysfunction that underlie the progress of vascular dementia.Additionally,we propose that targeting the nitric oxide-sGC-cGMP pathway using certain specific approaches may provide a novel therapeutic strategy for vascular dementia. 展开更多
关键词 endoplasmic reticulum stress endothelial nitric oxide synthase gene therapy nitric oxide NO-sGC-cGMP pathway synaptic dysfunction vascular dementia
下载PDF
Phase composition,conductivity,and sensor properties of cerium-doped indium oxide
17
作者 M.I.Ikim G.N.Gerasimov +2 位作者 V.F.Gromov O.J.Ilegbusi L.I.Trakhtenberg 《Nano Materials Science》 EI CAS CSCD 2024年第2期193-200,共8页
The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)... The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)and InOOH are formed,which are the precursors of stable cubic(c-In_(2)O_(3))and metastable rhombohedral(rh-In_(2)O_(3))phases,respectively.A transition from c-In_(2)O_(3)to rh-In_(2)O_(3)is observed with the addition of CeO_(2).The introduction of cerium into rh-In_(2)O_(3)results in a decrease in the sensor response to hydrogen,while it increases in composites based on c-In_(2)O_(3).The data on the sensor activity of the composites correlate with XPS results in which CeO_(2)causes a decrease in the concentrations of chemisorbed oxygen and oxygen vacancies in rh-In_(2)O_(3).The reverse situation is observed in composites based on c-In_(2)O_(3).Compared to In_(2)O_(3)and CeO_(2)–In_(2)O_(3)obtained by other methods,the synthesized composites demonstrate maximum response to H_(2)at low temperatures by 70–100℃,and have short response time(0.2–0.5 s),short recovery time(6–7 s),and long-term stability.A model is proposed for the dependence of sensitivity on the direction of electron transfer between In_(2)O_(3)and CeO_(2). 展开更多
关键词 Cerium oxide Indium oxide NANOCOMPOSITE Hydrothermal method Cubic phase Rhombohedral phase Sensor response CONDUCTIVITY HYDROGEN Response/recovery time
下载PDF
Dietary supplementation of zinc oxide modulates intestinal functionality during the post-weaning period in clinically healthy piglets
18
作者 Dirkjan Schokker Soumya K.Kar +3 位作者 Els Willems Alex Bossers Ruud A.Dekker Alfons J.M.Jansman 《Journal of Animal Science and Biotechnology》 SCIE CAS CSCD 2024年第1期313-328,共16页
Background To improve our understanding of host and intestinal microbiome interaction,this research investigated the effects of a high-level zinc oxide in the diet as model intervention on the intestinal microbiome an... Background To improve our understanding of host and intestinal microbiome interaction,this research investigated the effects of a high-level zinc oxide in the diet as model intervention on the intestinal microbiome and small intestinal functionality in clinically healthy post-weaning piglets.In study 1,piglets received either a high concentration of zinc(Zn)as zinc oxide(Zn O,Zn,2,690 mg/kg)or a low Zn concentration(100 mg/kg)in the diet during the post weaning period(d 14–23).The effects on the piglet's small intestinal microbiome and functionality of intestinal tissue were investigated.In study 2,the impact of timing of the dietary zinc intervention was investigated,i.e.,between d 0–14 and/or d 14–23 post weaning,and the consecutive effects on the piglet's intestinal functionality,here referring to microbiota composition and diversity and gene expression profiles.Results Differences in the small intestinal functionality were observed during the post weaning period between piglets receiving a diet with a low or high concentration Zn O content.A shift in the microbiota composition in the small intestine was observed that could be characterized as a non-pathological change,where mainly the commensals inter-changed.In the immediate post weaning period,i.e.,d 0–14,the highest number of differentially expressed genes(DEGs)in intestinal tissue were observed between animals receiving a diet with a low or high concentration Zn O content,i.e.,23 DEGs in jejunal tissue and 11 DEGs in ileal tissue.These genes are involved in biological processes related to immunity and inflammatory responses.For example,genes CD59 and REG3G were downregulated in the animals receiving a diet with a high concentration Zn O content compared to low Zn O content in both jejunum and ileum tissue.In the second study,a similar result was obtained regarding the expression of genes in intestinal tissue related to immune pathways when comparing piglets receiving a diet with a high concentration Zn O content compared to low Zn O content.Conclusions Supplementing a diet with a pharmaceutical level of Zn as Zn O for clinically healthy post weaning piglets influences various aspects intestinal functionality,in particular in the first two weeks post-weaning.The model intervention increased both the alpha diversity of the intestinal microbiome and the expression of a limited number of genes linked to the local immune system in intestinal tissue.The effects do not seem related to a direct antimicrobial effect of Zn O. 展开更多
关键词 Immune system Intestinal functionality MICROBIOTA PIGLETS Zinc oxide
下载PDF
Few-layered hexagonal boron nitride nanosheets stabilized Pt NPs for oxidation promoted adsorptive desulfurization of fuel oil
19
作者 Peiwen Wu Xin Song +9 位作者 Linlin Chen Lianwen He Yingcheng Wu Duanjian Tao Jing He Chang Deng Linjie Lu Yanhong Chao Mingqing Hua Wenshuai Zhu 《Green Energy & Environment》 SCIE EI CAS CSCD 2024年第3期495-506,共12页
A few-layered hexagonal boron nitride nanosheets stabilized platinum nanoparticles(Pt/h-BNNS)is engineered for oxidation-promoted adsorptive desulfurization(OPADS)of fuel oil.It was found that the few-layered structur... A few-layered hexagonal boron nitride nanosheets stabilized platinum nanoparticles(Pt/h-BNNS)is engineered for oxidation-promoted adsorptive desulfurization(OPADS)of fuel oil.It was found that the few-layered structure and the defective sites of h-BNNS not only are beneficial to the stabilization of Pt NPs but also favor the adsorption of aromatic sulfides.By employing Pt/h-BNNS with a Pt loading amount of 1.19 wt%as the active adsorbent and air as an oxidant,a 98.0%sulfur removal over dibenzothiophene(DBT)is achieved along with a total conversion of the DBT to the corresponding sulfones(DBTO_(2)).Detailed experiments show that the excellent desulfurization activity originates from the few-layered structure of h-BNNS and the high catalytic activity of Pt NPs.In addition,the OPADS system with Pt/h-BNNS as the active adsorbent shows remarkable stability in desulfurization performance with the existence of different interferents such as olefin,and aromatic hydrocarbons.Besides,the Pt/h-BNNS can be recycled 12 times without a significant decrease in desulfurization performance.Also,a process flow diagram is proposed for deep desulfurization of fuel oil and recovery of high value-added products,which would promote the industrial application of such OPADS strategy. 展开更多
关键词 DESULFURIZATION Adsorption Catalytic oxidation Active adsorbent DIBENZOTHIOPHENE
下载PDF
Mg/MgO interfaces as efficient hydrogen evolution cathodes causing accelerated corrosion of additive manufactured Mg alloys:A DFT analysis
20
作者 Man-Fai Ng Kai Xiang Kuah +1 位作者 Teck Leong Tan Daniel John Blackwood 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2024年第1期110-119,共10页
The corrosion rates of additive-manufactured Mg alloys are higher than their as-cast counterparts,possibly due to increased kinetics for the hydrogen evolution reaction on secondary phases,which may include oxide incl... The corrosion rates of additive-manufactured Mg alloys are higher than their as-cast counterparts,possibly due to increased kinetics for the hydrogen evolution reaction on secondary phases,which may include oxide inclusions.Scanning Kelvin Probe Force Microscopy demonstrated that MgO inclusions could act as cathodes for Mg corrosion,but their low conductivity likely precludes this.However,the density of state calculations through density functional theory using hybrid HSE06 functional revealed overlapping electronic states at the Mg/MgO interface,which facilitates electron transfers and participates in redox reactions.Subsequent determination of the hydrogen absorption energy at the Mg/MgO interface reveals it to be an excellent catalytic site,with HER being found to be a factor of 23x more efficient at the interface than on metallic Mg.The results not only support the plausibility of the Mg/MgO interface being an effective cathode to the adjacent anodic Mg matrix during corrosion but also contribute to the understanding of the enhanced cathodic activities observed during the anodic dissolution of magnesium. 展开更多
关键词 MAGNESIUM Magnesium oxide Interface Hydrogen evolution DFT
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部