Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production...Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production,oxygen transport membranes(OTMs)appear as an alternative technology for the cryogenic distillation of air,the industrially-established process of producing oxygen.Moreover,OTMs could provide oxygen from different sources(air,water,CO_(2),etc.),and they are more flexible in adapting to current processes,producing oxygen at 700^(-1)000℃.Furthermore,OTMs can be integrated into catalytic membrane reactors,providing new pathways for different processes.The first part of this study was focused on electrification on a traditional OTM material(Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)),imposing different electric currents/voltages along a capillary membrane.Thanks to the emerging Joule effect,the membrane-surface temperature and the associated O_(2) permeation flux could be adjusted.Here,the OTM is electrically and locally heated and reaches 900℃on the surface,whereas the surrounding of the membrane was maintained at 650℃.The O_(2)permeation flux reached for the electrified membranes was~3.7 NmL min^(-1)cm^(-2),corresponding to the flux obtained with an OTM non-electrified at 900℃.The influence of depositing a porous Ce_(0.8)Tb_(0.2)O_(2-δ) catalytic/protective layer on the outer membrane surface revealed that lower surface temperatures(830℃)were detected at the same imposed electric power.Finally,the electrification concept was demonstrated in a catalytic membrane reactor(CMR)where the oxidative dehydrogenation of ethane(ODHE)was carried out.ODHE reaction is very sensitive to temperature,and here,we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O_(2) injection into the reaction can be easily fine-tuned.展开更多
In this work, a dual-phase material consisting Gd0.1Ce0.9O2-δ （GDC, 60 wt%） was synthesized. of La0.7Ca0.3Cr0.95Zn0.05O3-δ （LCCZ, 40 wt%） and Properties including phase structure, sintering behavior, electrical ...In this work, a dual-phase material consisting Gd0.1Ce0.9O2-δ （GDC, 60 wt%） was synthesized. of La0.7Ca0.3Cr0.95Zn0.05O3-δ （LCCZ, 40 wt%） and Properties including phase structure, sintering behavior, electrical conductivity and oxygen permeability for LCCZ-GDC were evaluated. The results show that dense LCCZ-GDC dual-phase disks were obtained at the sintering temperature of 1250, 1300, 1350 and 1400 ℃ by tape casting and high temperature sintering method. The grain sizes of both GDC and LCCZ grew up with the increasing of sintering temperature. The average grain size of GDC was about 0.5, 0.8, 1.4, 1.8 μm while the average grain size of LCCZ was about 0.8, 1.5, 1.8 and 2 pm after sintering at 1250, 1300, 1350 and 1400℃, respectively. Oxygen flux of LCCZ-GDC decreased with the increase of sintering temperature from 1250 to 1400 ℃. The oxygen flux of LCCZ-GDC sintered at 1250 ℃ reached 0.079 mL/min/cm2 at 975℃ with a membrane thickness of 800 μm. Dual-phase material of LCCZ-GDC will be a promising oxygen transport membrane material for its low sintering temperature and good microstructure.展开更多
基金Financial support by the Spanish Ministry of Science(PID2022139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AE I/10.13039/501100011033)with funding from Next Generation EU(PRTR-C17.I1)within the Planes Complementarios con CCAA(Area of Green Hydrogen and Energy)+2 种基金carried out in the CSIC Interdisciplinary Thematic Platform(PTI+)Transición Energética Sostenible+(PTI-TRANSENER+)the Universitat Politècnica de València(UPV)the support of the Servicio de Microscopía Elcectronica of the UPV。
文摘Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production,oxygen transport membranes(OTMs)appear as an alternative technology for the cryogenic distillation of air,the industrially-established process of producing oxygen.Moreover,OTMs could provide oxygen from different sources(air,water,CO_(2),etc.),and they are more flexible in adapting to current processes,producing oxygen at 700^(-1)000℃.Furthermore,OTMs can be integrated into catalytic membrane reactors,providing new pathways for different processes.The first part of this study was focused on electrification on a traditional OTM material(Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)),imposing different electric currents/voltages along a capillary membrane.Thanks to the emerging Joule effect,the membrane-surface temperature and the associated O_(2) permeation flux could be adjusted.Here,the OTM is electrically and locally heated and reaches 900℃on the surface,whereas the surrounding of the membrane was maintained at 650℃.The O_(2)permeation flux reached for the electrified membranes was~3.7 NmL min^(-1)cm^(-2),corresponding to the flux obtained with an OTM non-electrified at 900℃.The influence of depositing a porous Ce_(0.8)Tb_(0.2)O_(2-δ) catalytic/protective layer on the outer membrane surface revealed that lower surface temperatures(830℃)were detected at the same imposed electric power.Finally,the electrification concept was demonstrated in a catalytic membrane reactor(CMR)where the oxidative dehydrogenation of ethane(ODHE)was carried out.ODHE reaction is very sensitive to temperature,and here,we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O_(2) injection into the reaction can be easily fine-tuned.
基金the financial support from the National Basic Research Program of China("973 Program",No. 2012CB215404)the National Natural Science Foundation of China(No.51261120378)the State Key Laboratory of Coal Resources and Safe Mining(No.2013CRSMZZ01)
文摘In this work, a dual-phase material consisting Gd0.1Ce0.9O2-δ （GDC, 60 wt%） was synthesized. of La0.7Ca0.3Cr0.95Zn0.05O3-δ （LCCZ, 40 wt%） and Properties including phase structure, sintering behavior, electrical conductivity and oxygen permeability for LCCZ-GDC were evaluated. The results show that dense LCCZ-GDC dual-phase disks were obtained at the sintering temperature of 1250, 1300, 1350 and 1400 ℃ by tape casting and high temperature sintering method. The grain sizes of both GDC and LCCZ grew up with the increasing of sintering temperature. The average grain size of GDC was about 0.5, 0.8, 1.4, 1.8 μm while the average grain size of LCCZ was about 0.8, 1.5, 1.8 and 2 pm after sintering at 1250, 1300, 1350 and 1400℃, respectively. Oxygen flux of LCCZ-GDC decreased with the increase of sintering temperature from 1250 to 1400 ℃. The oxygen flux of LCCZ-GDC sintered at 1250 ℃ reached 0.079 mL/min/cm2 at 975℃ with a membrane thickness of 800 μm. Dual-phase material of LCCZ-GDC will be a promising oxygen transport membrane material for its low sintering temperature and good microstructure.
