GaN-based vertical P-i-N diode with mesa edge terminal structure due to electric field crowding effect, the breakdown voltage of the device is significantly reduced. This work investigates three terminal structures, i...GaN-based vertical P-i-N diode with mesa edge terminal structure due to electric field crowding effect, the breakdown voltage of the device is significantly reduced. This work investigates three terminal structures, including deeply etched, bevel, and stepped-mesas terminal structures, to suppress electric field crowding effects at the device and junction edges. Deeply-etched mesa terminal yields a breakdown voltage of 1205 V, i.e., 89% of the ideal voltage. The bevel-mesa terminal achieves about 89% of the ideal breakdown voltage, while the step-mesa terminal is less effective in mitigating electric field crowding, at about 32% of the ideal voltage. This work can provide an important reference for the design of high-power, high-voltage GaN-based P-i-N power devices, finding a terminal protection structure suitable for GaNPiN diodes to further enhance the breakdown performance of the device and to unleash the full potential of GaN semiconductor materials.展开更多
钙钛矿太阳能电池(perovskite solar cells,PSCs)由于光电转换效率高、制备工艺简单、成本低等优势受到广泛关注,电池效率已从3.8%提升到25.7%。目前,对基于SnO_(2)电子传输层的n-i-p型平板结构电池的研究越来越多,但存在着工艺可重复...钙钛矿太阳能电池(perovskite solar cells,PSCs)由于光电转换效率高、制备工艺简单、成本低等优势受到广泛关注,电池效率已从3.8%提升到25.7%。目前,对基于SnO_(2)电子传输层的n-i-p型平板结构电池的研究越来越多,但存在着工艺可重复性差、效率低等问题。针对n-i-p型平板结构PSCs的制备进行了系统的研究,包括导电基底的选择、钙钛矿制备工艺参数的优化以及电池存储环境。结果证明,上述参数对于电池均具有重要影响,并结合扫描电子显微镜、X射线衍射、吸收光谱分析了原因。在最优工艺条件下(掺锡氧化铟基底,PbI_(2)退火温度70℃(1 min),胺盐溶液滴加后静置时间不超过5 s,存储湿度4.5%),器件平均效率达到21.85%,最高效率达到23.47%,迟滞可忽略,具有良好的可重复性。研究结果可为制备重复性好、光电转换效率高的PSCs提供科学支撑。展开更多
研究了p-In Ga N层厚度对p-i-n结构In Ga N太阳电池性能的影响。模拟计算发现,随着p-In Ga N层厚度的增加,In Ga N太阳电池效率降低。较差的p-In Ga N欧姆接触特性会破坏In Ga N太阳电池性能。计算结果还表明,无论欧姆接触特性好坏,随着...研究了p-In Ga N层厚度对p-i-n结构In Ga N太阳电池性能的影响。模拟计算发现,随着p-In Ga N层厚度的增加,In Ga N太阳电池效率降低。较差的p-In Ga N欧姆接触特性会破坏In Ga N太阳电池性能。计算结果还表明,无论欧姆接触特性好坏,随着p-In Ga N层厚度的增加,短路电流下降是导致In Ga N电池效率降低的主要原因。选择较薄的p-In Ga N层有利于提高p-i-n结构In Ga N太阳电池的效率。展开更多
Organic light emitting diodes （OLEDs） incorporating an n-doping transport layer comprised of 8-hydroxy-quin- olinato lithium （Liq） doped into 4＇ 7- diphyenyl-1,10-phenanthroline （BPhen） as ETL and a p-doping tr...Organic light emitting diodes （OLEDs） incorporating an n-doping transport layer comprised of 8-hydroxy-quin- olinato lithium （Liq） doped into 4＇ 7- diphyenyl-1,10-phenanthroline （BPhen） as ETL and a p-doping transport layer that includes tetrafluro-tetracyano-quinodimethane （F4- TCNQ） doped into 4,4′, 4″-tris （3-methylphenylphenylamono） triphe- nylamine （m-MTDATA） are demonstrated. In order to examine the improvement in the conductivity of transport layers, hole-only and electron-only devices are fabricated. The current and power efficiency Of organic light-emitting diodes are improved significantly after introducing an n-doping （BPhen：33wt% Liq） layer as an electron transport layer （ETL） and a p-doping layer composed of m-MTDATA and F4- TCNQ as a hole transport layer （HTL）. Compared with the control device （without doping） , the current efficiency and power efficiency of the most efficient device （device C） are enhanced by approximately 51% and 89% ,respectively, while driving voltage is reduced by 29%. This improvement is attributed to the improved conductivity of the transport layers that leads to efficient charge balance in the emission zone.展开更多
文摘GaN-based vertical P-i-N diode with mesa edge terminal structure due to electric field crowding effect, the breakdown voltage of the device is significantly reduced. This work investigates three terminal structures, including deeply etched, bevel, and stepped-mesas terminal structures, to suppress electric field crowding effects at the device and junction edges. Deeply-etched mesa terminal yields a breakdown voltage of 1205 V, i.e., 89% of the ideal voltage. The bevel-mesa terminal achieves about 89% of the ideal breakdown voltage, while the step-mesa terminal is less effective in mitigating electric field crowding, at about 32% of the ideal voltage. This work can provide an important reference for the design of high-power, high-voltage GaN-based P-i-N power devices, finding a terminal protection structure suitable for GaNPiN diodes to further enhance the breakdown performance of the device and to unleash the full potential of GaN semiconductor materials.
文摘钙钛矿太阳能电池(perovskite solar cells,PSCs)由于光电转换效率高、制备工艺简单、成本低等优势受到广泛关注,电池效率已从3.8%提升到25.7%。目前,对基于SnO_(2)电子传输层的n-i-p型平板结构电池的研究越来越多,但存在着工艺可重复性差、效率低等问题。针对n-i-p型平板结构PSCs的制备进行了系统的研究,包括导电基底的选择、钙钛矿制备工艺参数的优化以及电池存储环境。结果证明,上述参数对于电池均具有重要影响,并结合扫描电子显微镜、X射线衍射、吸收光谱分析了原因。在最优工艺条件下(掺锡氧化铟基底,PbI_(2)退火温度70℃(1 min),胺盐溶液滴加后静置时间不超过5 s,存储湿度4.5%),器件平均效率达到21.85%,最高效率达到23.47%,迟滞可忽略,具有良好的可重复性。研究结果可为制备重复性好、光电转换效率高的PSCs提供科学支撑。
文摘研究了p-In Ga N层厚度对p-i-n结构In Ga N太阳电池性能的影响。模拟计算发现,随着p-In Ga N层厚度的增加,In Ga N太阳电池效率降低。较差的p-In Ga N欧姆接触特性会破坏In Ga N太阳电池性能。计算结果还表明,无论欧姆接触特性好坏,随着p-In Ga N层厚度的增加,短路电流下降是导致In Ga N电池效率降低的主要原因。选择较薄的p-In Ga N层有利于提高p-i-n结构In Ga N太阳电池的效率。
文摘Organic light emitting diodes （OLEDs） incorporating an n-doping transport layer comprised of 8-hydroxy-quin- olinato lithium （Liq） doped into 4＇ 7- diphyenyl-1,10-phenanthroline （BPhen） as ETL and a p-doping transport layer that includes tetrafluro-tetracyano-quinodimethane （F4- TCNQ） doped into 4,4′, 4″-tris （3-methylphenylphenylamono） triphe- nylamine （m-MTDATA） are demonstrated. In order to examine the improvement in the conductivity of transport layers, hole-only and electron-only devices are fabricated. The current and power efficiency Of organic light-emitting diodes are improved significantly after introducing an n-doping （BPhen：33wt% Liq） layer as an electron transport layer （ETL） and a p-doping layer composed of m-MTDATA and F4- TCNQ as a hole transport layer （HTL）. Compared with the control device （without doping） , the current efficiency and power efficiency of the most efficient device （device C） are enhanced by approximately 51% and 89% ,respectively, while driving voltage is reduced by 29%. This improvement is attributed to the improved conductivity of the transport layers that leads to efficient charge balance in the emission zone.
