A Novel Multiple DBC-staked units Package to Parallel More Chips for SiC Power Module

Silicon carbide(SiC) power modules play an essential role in the electric vehicle drive system. To improve their performance, reduce their size, and increase production efficiency, this paper proposes a multiple staked direct bonded copper(DBC) unit based power module packaging method to parallel more chips. This method utilizes mutual inductance cancellation effect to reduce parasitic inductance. Because the conduction area in the new package is doubled, the overall area of power module can be reduced. Entire power module is divided into smaller units to enhance manufacture yield, and improve design freedom. This paper provides a detailed design, analysis and fabrication procedure for the proposed package structure. Additionally, this paper offers several feasible solutions for the connection between power terminals and DBC untis. With the structure, 18dies were paralleled for each phase-leg in a econodual size power module. Both simulation and double pulse test results demonstrate that, compared to conventional layouts, the proposed package method has 74.8% smaller parasitic inductance and 34.9% lower footprint.

Multi-Component Resource Recycling from Waste Light-Emitting Diode Under Hydrothermal Condition:Plastic Package Degradation,Speciation of Nano-TiO_(2),and Environmental Impact Assessment

Light emitting diodes(LEDs)have accounted for most of the lighting market as the technology matures and costs continue to reduce.As a new type of e-waste,LED is a double-edged sword,as it contains not only precious and rare metals but also organic packaging materials.In previous studies,LED recycling focused on recovering precious and strategic metals while ignoring harmful substances such as organic packaging materials.Unlike crushing and other traditional methods,hydrothermal treatment can provide an environment-friendly process for decomposing packaging materials.This work developed a closed reaction vessel,where the degradation rate of plastic polyphthalamide(PPA)was close to 100%,with nano-TiO_(2)encapsulated in plastic PPA being efficiently recovered,while metals contained in LED were also recycled efficiently.Besides,the role of water in plastic PPA degradation that has been overlooked in current studies was explored and speculated in detail in this work.Environmental impact assessment revealed that the proposed recycling route for waste LED could significantly reduce the overall environmental impact compared to the currently published processes.Especially the developed method could reduce more than half the impact of global warming.Furthermore,this research provides a theoretical basis and a promising method for recycling other plastic-packaged e-waste devices,such as integrated circuits.

DSN-BR-Based Online Inspection Method and Application for Surface Defects of Pharmaceutical Products in Aluminum-Plastic Blister Packages

Ensuring high product quality is of paramount importance in pharmaceutical drug manufacturing,as it is subject to rigorous regulatory practices.This study presents a research focused on the development of an on-line detection method and system for identifying surface defects in pharmaceutical products packaged in aluminum-plastic blisters.Firstly,the aluminum-plastic blister packages exhibit multi-scale features and inter-class indistinction.To address this,the deep semantic network with boundary refinement(DSN-BR)model is proposed,which leverages semantic segmentation domain knowledge,to accurately segment the defects in pixel level.Additionally,a specialized image acquisition module that minimizes the impact of ambient light is established,ensuring high-quality image capture.Finally,the image acquisition module,image detection module,and data management module are designed to construct a comprehensive online surface defect detection system.To validate the effectiveness of our approach,we employ a real dataset for instance verification on the implemented system.The experimental results substantiate the outstanding performance of the DSN-BR,achieving the mean intersection over union(MIoU)of 90.5%.Furthermore,the proposed system achieves an inference speed of up to 14.12 f/s,while attaining an F1-Score of 98.25%.These results demonstrate that the system meets the actual needs of the enterprise and provides theoretical and methodological support for intelligent inspection of product surface quality.By standardizing the control process of pharmaceutical manufacturing and improving the management capability of the manufacturing process,our approach holds significant market application prospects.

Intervention package on stress management: Improving comprehensive well-being among nurses

Objective:The main objective of this study is to investigate the effectiveness of the stress management intervention package in improving stress-related burnout.Materials and Methods:An experimental study was done on 300 nurses selected by a nonprobability convenience sampling technique and a quasi-experimental one-group pre-and posttest research design was utilized.Modified expanded nurses stress scale and self-structured three-point Likert scale on the challenges that nurses may face following stressful life events utilized to collect information.The nurses signed up for six interactive sessions on various stress-coping methods by utilizing a variety of teaching strategies such as lecture cum discussion,video slides,group work,and direct interaction with the experts to explore stress-related issues.Results:Continuous stress affects both the body and the mind,causing psychosomatic symptoms.Data found that 2%to 10%of nurses frequently suffered with physical symptoms such as exhaustion,backache,acidity,headache,shoulder stiffness,and insomnia.Following the intervention,the number of nurses who had these symptoms frequently and sometimes decreased.Previously,10%of nurses experienced emotional symptoms frequently;however,after intervention,this figure was reduced to<2%.The greatest proportion of nurses(18%)reported frequently worrying,while 1.3%expressed frequent worrying after intervention.Maximum(5%)of nurses had a tendency to eat too little or too much;this has been reduced to 0.3%after the intervention.The intervention package on stress management significantly improved nurses’Conclusion:An intervention package for stress management was helpful in lowering physical,emotional,psychological,and behavioral stress-related symptoms among nurses.

MicroMagnetic.jl:A Julia package for micromagnetic and atomistic simulations with GPU support

MicroMagnetic.jl is an open-source Julia package for micromagnetic and atomistic simulations.Using the features of the Julia programming language,MicroMagnetic.jl supports CPU and various GPU platforms,including NVIDIA,AMD,Intel,and Apple GPUs.Moreover,MicroMagnetic.jl supports Monte Carlo simulations for atomistic models and implements the nudged-elastic-band method for energy barrier computations.With built-in support for double and single precision modes and a design allowing easy extensibility to add new features,MicroMagnetic.jl provides a versatile toolset for researchers in micromagnetics and atomistic simulations.

Prognostic impact of hypernatremia for septic shock patients in the intensive care unit

BACKGROUND Hypernatremia represents a significant electrolyte imbalance associated with numerous adverse outcomes,particularly in cases of intensive care unit(ICU)-acquired hypernatremia(IAH).Nevertheless,its relevance in patients with septic shock remains uncertain.AIM To identify independent risk factors and their predictive efficacy for IAH to improve outcomes in patients with septic shock.METHODS In the present retrospective single-center study,a cohort of 157 septic shock patients with concurrent hypernatremia in the ICU at The First Affiliated Hospital of Soochow University,between August 1,2018,and May 31,2023,were analyzed.Patients were categorized based on the timing of hypernatremia occurrence into the IAH group(n=62),the non-IAH group(n=41),and the normonatremia group(n=54).RESULTS In the present study,there was a significant association between the high serum sodium concentrations,excessive persistent inflammation,immunosuppression and catabolism syndrome and chronic critical illness,while rapid recovery had an apparent association with normonatremia.Moreover,multivariable analyses revealed the following independent risk factors for IAH:Total urinary output over the preceding three days[odds ratio(OR)=1.09;95%CI:1.02–1.17;P=0.014],enteral nutrition(EN)sodium content of 500 mg(OR=2.93;95%CI:1.13–7.60;P=0.027),and EN sodium content of 670 mg(OR=6.19;95%CI:1.75–21.98;P=0.005)were positively correlated with the development of IAH.Notably,the area under the curve for total urinary output over the preceding three days was 0.800(95%CI:0.678–0.922,P=0.001).Furthermore,maximum serum sodium levels,the duration of hypernatremia,and varying sodium correction rates were significantly associated with 28-day in-hospital mortality in septic shock patients(P<0.05).CONCLUSION The present findings illustrate that elevated serum sodium level was significantly associated with a poor prognosis in septic shock patients in the ICU.It is highly recommended that hypernatremia be considered a potentially important prognostic indicator for the outcome of septic shock.

Chicken Swarm Optimization with Deep Learning Based Packaged Rooftop Units Fault Diagnosis Model

Rooftop units(RTUs)were commonly employed in small commercial buildings that represent that can frequently do not take the higher level maintenance that chillers receive.Fault detection and diagnosis(FDD)tools can be employed for RTU methods to ensure essential faults are addressed promptly.In this aspect,this article presents an Optimal Deep Belief Network based Fault Detection and Classification on Packaged Rooftop Units(ODBNFDC-PRTU)model.The ODBNFDC-PRTU technique considers fault diagnosis as amulti-class classification problem and is handled usingDL models.For fault diagnosis in RTUs,the ODBNFDC-PRTU model exploits the deep belief network(DBN)classification model,which identifies seven distinct types of faults.At the same time,the chicken swarm optimization(CSO)algorithm-based hyperparameter tuning technique is utilized for resolving the trial and error hyperparameter selection process,showing the novelty of the work.To illustrate the enhanced performance of the ODBNFDC-PRTU algorithm,a comprehensive set of simulations are applied.The comparison study described the improvement of the ODBNFDC-PRTU method over other recent FDD algorithms with maximum accuracy of 99.30%and TPR of 93.09%.

The Effect of Training Package Development for Secondary School Students in Thailand Toward ASEAN Community

The purposes of this research were： （1） to create a training package to prepare secondary school students in northeastern of Thailand toward ASEAN （Association of Southeast Asian Nations） Community; （2） to compare the knowledge of secondary school students toward ASEAN before and after use training package; and （3） the expectations of the students in the northeast of their own preparation for the ASEAN community. Experimental research was used in this research. The subject was including 2,000 students who were randomly divided into groups of seven provinces. The statistics used in data analysis were percentage, average, standard deviation, and T-test. The research results showed that： （1） a training package to prepare secondary school students in northeastern of Thailand toward ASEAN Community, the effectiveness index （E.I.） was .57, according to the established criteria; （2） a comparison of pretest and post-test results found the use of cognitive training may vary, statistically significant at the .05 level; （3） an expectation of the secondary school students in the preparation of role into ASEAN Community found that the students who participated in a concept reflect that the knowledge and attitudes to prepare themselves for the ASEAN community.

Drop failure modes of Sn-3.0Ag-0.5Cu solder joints in wafer level chip scale package

To reveal the drop failure modes of the wafer level chip scale packages （WLCSPs） with Sn-3.0Ag-0.5Cu solder joints, board level drop tests were performed according to the JEDEC standard. Six failure modes were identified, i.e., short FR-4 cracks and complete FR-4 cracks at the printing circuit board （PCB） side, split between redistribution layer （RDL） and Cu under bump metallization （UBM）, RDL fracture, bulk cracks and partial bulk and intermetallic compound （IMC） cracks at the chip side. For the outmost solder joints, complete FR-4 cracks tended to occur, due to large deformation of PCB and low strength of FR-4 dielectric layer. The formation of complete FR-4 cracks largely absorbed the impact energy, resulting in the absence of other failure modes. For the inner solder joints, the absorption of impact energy by the short FR-4 cracks was limited, resulting in other failure modes at the chip side.

Effect of Freshness Protection Package on Storage and Preservation of Chinese Cabbage

The effect of freshness protection package on Chinese cabbage placed in the self-made shelf in ventilated storage was investigated, and the physiological-qual-ity indexes change were determined during the storage period. The results showed that the losses of weight and vitamin C were significantly reduced. The accumula-tion of crude fiber was effectively inhibited. But protein content was maintained at a low level and the rotting more serious of Chinese cabbage at the end of the stor-age packaged with the fresh keeping bags.

Application of wavelet package filtering in the de-noising of fiber optic gyroscopes

To reduce the drift error existing in the output signal of fiber optic gyroscopes （FOG）, a mathematical model of the FOG output signal is set up; the error characteristics of the FOG output signal are analyzed, and semi-soft threshold filtering is chosen based on the comparison of hard threshold and soft threshold filtering. The semi-soft threshold wavelet package filtering method is applied in the filtering of the FOG output signal. Experiments of the stationary and dynamic FOG output signals filtered with the wavelet package analysis are carried out in a lab environment, respectively. Experiments done with the real-time measured FOG signal show that the method of semi-soft threshold wavelet package filtering reduces the mean square error from 5 （°）/h to 1 （°）/h, so it is effective in eliminating the white noises and the fractal noises existing in the FOG. The novel method proposed here is proved valid in reducing the FOG drift error, satisfying the technical demands of high precision and realtime processing.

Integrated power electronics module based on chip scale packaged power devices

High performance can be obtained for the integrated power electronics module（IPEM） by using a three-dimensional packaging structure instead of a planar structure. A three- dimensional packaged half bridge-IPEM （HB-IPEM）, consisting of two chip scale packaged MOSFETs and the corresponding gate driver and protection circuits, is fabricated at the laboratory. The reliability of the IPEM is controlled from the shape design of solder joints and the control of assembly process parameters. The parasitic parameters are extracted using Agilent 4395A impedance analyzer for building the parasitic parameter model of the HB- IPEM. A 12 V/3 A output synchronous rectifier Buck converter using the HB-IPEM is built to test the electrical performance of the HB-IPEM. Low voltage spikes on two MOSFETs illustrate that the three-dimensional package of the HB-IPEM can decrease parasitic inductance. Temperature distribution simulation results of the HB-IPEM using FLOTHERM are given. Heat dissipation of the solder joints makes the peak junction temperature of the chip drop obviously. The package realizes three-dimensional heat dissipation and has better thermal management.

利用Oracle PL/SQL Package实现Dispatcher设计模式

Dispatcher设计模式可以使用各种技术来实现。以社会保险业务处理为基础,有效地利用ORACLEPL/SQLPac-kage语言及支撑环境对面向对象技术的支持,通过定义消息ID、传递消息ID、撰写处理函数、连接消息ID和处理函数来实现Dispatcher设计模式,并且构造出能处理各项社会保险管理业务的Package组件。

Model of gas exchange dynamics for modified-atmosphere packages containing fresh produce

A model for modified-atmosphere packaging （MAP） systems containing fruits and vegetables was developed.The computer simulation was performed to predict the gas mass concentrations inside the packages and was successfully verified by experiments with yellow peaches at 5,15 and 25 ℃ using two types of packaging films.A Michaelis-Menten type respiration model with noncompetitive inhibition mechanism due to CO2 was adopted while the respiration rates were measured with an improved permeable system method suitable for either steady or unsteady state.The applicability of the model in the design of MAP systems was demonstrated with a calculation to evaluate film specification and equilibrium concentrations of O2 and CO2 in the package containing yellow peaches.

利用ORACLE PL/SQL PACKAGE实现DISPATCHER设计模式

以ORACLEPACKAGE语言及支撑环境为基础,有效地利用其对面向对象技术的支持,实现DISPATCHER设计模式。

澳大利亚Training Package对机电一体化技术专业教学标准建设的启示

开发、制订专业教学标准是贯彻落实科学发展观,落实《教育规划纲要》要求,完善教育质量国家标准体系,推进现代职业教育体系建设的重要措施.从澳大利亚职业培训包的制度中吸取有益经验,立足于我国实际,分析了机电一体化技术专业的现状和改革中遇到的问题,结合教育部加强专业教学标准建设推进工作提出了机电一体化技术专业教学标准建设的相关建议.

MUTI-FUNCTIONAL PACKAGE多功能DESIGN包装设计的研究

随着经济的发展,商品的包装越来越受到大家的重视,包装产业亦是迅猛发展,且取得了瞩目的成就。但是随着包装材料使用量的逐渐增大,包装废弃物污染环境的问题也越来越严重。包装绿色设计已日益显现出对环保的积极作用,其作用可以总结为：有利于保护自然资源,以及在包装的整个设计、制造、使用和回收利用的过程中对生态环境损失最小。

Ultrasonic C-scan Detection for Stainless Steel Spot Welding Based on Wavelet Package Analysis

An ultrasonic test of spot welding for stainless steel is conducted. Based on wavelet packet decomposition, the ultrasonic echo signal has been analyzed deeply in time - frequency domain, which can easily distinguish the nugget from the corona bond. The 2D C-scan images produced by ultrasonic C scan which contribute to quantitatively calculate the nugget diameter for the computer are further analyzed. The spot welding nugget diameter can be automatically obtained by image enhancement, edge detection and equivalent diameter algorithm procedure. The ultrasonic detection values in this paper show good agreement with the metallographic measured values. The mean value of normal distribution curve is 0.006 67, and the standard deviation is 0.087 11. Ultrasonic C-scan test based on wavelet packet signal analysis is of high accuracy and stability.

EFFECTS OF LEAD WIDTHS AND PITCHES ON RELIABILITY OF QUAD FLAT PACKAGE(QFP)SOLDERED JOINTS

The finite element method（FEM） is used to analyze the effects of lead widths and pitches on reliability of soldered joints. The optimum simulation for QFP devices is also researched. The results indicate that when the lead pitches are the same, the maximum equivalent stress of the soldered joints increases with the increasing of lead widths, while the reliability of the soldered joints reduces. When the lead widths are the same, the maximum equivalent stress of the soldered joints doesn＇t decrease completely with the increasing of lead pitches, a minimum value of the maximum equivalent stress values exists in all the curves. Under this condition the maximum equivalent stress of the soldewed joints is relatively the least, the reliability of soldered joints is high and the assembly is excellent. The simulating results indicate the best parameter： The lead width is 0.2 mm and lead pitch is 0.3 mm （the distance between two leads is 0.1 mm）, which are benefited for the micromation of QFP devices now. The minimum value of the maximum equivalent stress of soldered joints exists while lead width is 0.25 mm and lead pitch is 0.35 mm （the distance between two leads is 0.1 mm）, the devices can serve for a long time and the reliability is the highest, the assembly is excellent. The simulating results also indicate the fact that the lead width is 0.15 mm and lead pitch is 0.2 mm maybe the limit of QFP, which is significant for the high lead count and micromation of assembly.

Integrated physics package of a chip-scale atomic clock

The physics package of a chip-scale atomic clock （CSAC） has been successfully realized by integrating vertical cavity surface emitting laser （VCSEL）, neutral density （ND） filter, λ/4 wave plate, 87Rb vapor cell, photodiode （PD）, and magnetic coil into a cuboid metal package with a volume of about 2.8 cm3. In this physics package, the critical component, 87Rb vapor cell, is batch-fabricated based on MEMS technology and in-situ chemical reaction method. Pt heater and thermistors are integrated in the physics package. A PTFE pillar is used to support the optical elements in the physics package, in order to reduce the power dissipation. The optical absorption spectrum of 87Rb D1 line and the microwave frequency correction signal are successfully observed while connecting the package with the servo circuit system. Using the above mentioned packaging solution, a CSAC with short-term frequency stability of about 7 × 10^-10τ-1/2 has been successfully achieved, which demonstrates that this physics package would become one promising solution for the CSAC.