Sustainable, thermoplastic and hydrophobic coating from natural cellulose and cinnamon to fabricate eco-friendly catering packaging

Non-degradable polymers cause serious environmental pollution problem,such as the widely-used while unrecyclable coatings which significantly affect the overall degradation performance of products.It is imperative and attractive to develop biodegradable functional coatings.Herein,we proposed a novel strategy to successfully prepare biodegradable,thermoplastic and hydrophobic coatings with high transparence and biosafety by weakening the interchain interactions between cellulose chain.The natural cellulose and cinnamic acid were as raw materials.Via reducing the degree of polymerization(DP)of cellulose and regulating the degree of substitution(DS)of cinnamate moiety,the obtained cellulose cinnamate(CC)exhibited not only the thermalflow behavior but also good biodegradability,which solves the conflict between the thermoplasticity and biodegradability in cellulose-based materials.The glass transition temperature(T_(g))and thermalflow temperature(T_(f))of the CC could be adjusted in a range of 150–200℃ and 180–210℃,respectively.The CC with DS<1.2 and DP≤100 degraded more than 60%after an enzyme treatment for 7 days,and degraded more than 80%after a composting treatment for 42 days.Furthermore,CC had no toxicity to human epidermal cells even at a high concentration(0.5 mg mL^(-1)).In addition,CC could be easily fabricated into multifunctional coating with high hydrophobicity,thermal adhesion and high transparence.Therefore,after combining with cellophane and paperboard,CC coating with low DP and DS could be used to prepare fully-biodegradable heat-sealing packaging,art paper,paper cups,paper straws and food packaging boxes.

Analysis of quality-related proteins in golden pompano(Trachinotus ovatus)fillets with modified atmosphere packaging under superchilling storage

Here,we aimed to study the changes in proteome of golden pompano fillets during post-mortem storage.Tandem mass tags(TMT)-labeled quantitative proteomic strategy was applied to investigate the relationships between protein changes and quality characteristics of modified atmosphere packaging(MAP)fillets during superchilling(-3°C)storage.Scanning electron microscopy was used to show that the muscle histology microstructure of fillets was damaged to varying degrees,and low-field nuclear magnetic resonance was used to find that the immobilized water and free water in the muscle of fillets changed significantly.Total sulfhydryl content,TCA-soluble peptides and Ca2+-ATPase activity also showed that the fillet protein had a deterioration by oxidation and denaturation.The Fresh(FS),MAP,and air packaging(AP)groups were set.Total of 150 proteins were identified as differential abundant proteins(DAPs)in MAP/FS,while 209 DAPs were in AP/FS group.The KEGG pathway analysis indicated that most DAPs were involved in binding proteins and protein turnover.Correlation analysis found that 52 DAPs were correlated with quality traits.Among them,8 highly correlated DAPs are expected to be used as potential quality markers for protein oxidation and water-holding capacity.These results provide a further understanding of the muscle deterioration mechanism of packaging golden pompano fillets during superchilling.

Modified Atmospheric Packaging and Its Effect on Postharvest Cannabis Quality

Cannabis sativa L. is used as fiber, food, and medicine in several countries. Though it is illegal for recreational use in most of the world, there are some countries that have legalized production and sale. There is a lot of research on production of cannabis, but less so on storage technologies. Cannabis contains several high value compounds, such as cannabinoids and terpenoids, that are susceptible to degradation via light, temperature, and oxygen. Several studies have explored temperature and light, and industry has adjusted accordingly. However, less is known about oxygen-induced degradation. Biochemical studies have demonstrated oxidative degradation of high value compounds, and many producers use some form of modified atmospheric packaging (MAP) for storage. However, the efficacy of MAP is unclear. The objective of this paper is to review our current understanding of MAP in postharvest cannabis storage and identify avenues where additional research is needed.

Study on the Influence of Food Packaging on the Psychology of Different Groups of Consumers

With the vigorous development of consumer culture in today’s society,various types of food packaging also appear in front of consumers in different forms.There are very big differences in food packaging in terms of shape,color,style and other aspects of information transmission,which have the most direct impact on the audience’s food consumption needs.Driven by the consumption-oriented society,food packaging has shown very obvious comprehensive characteristics,is significantly interdisciplinary,and has close connections with other disciplines.This article will analyze and sort out the impact of food packaging on consumer psychology from different perspectives.

Research on Silicon Carbide Dispersion-Reinforced Hypereutectic Aluminum-Silicon Electronic Packaging Materials

The objective of this study is to improve the mechanical properties and machining performance of high thermal conductivity and low expansion silicon carbide dispersion-strengthened hypereutectic aluminum-silicon electronic packaging materials to meet the needs of aviation,aerospace,and electronic packaging fields.We used the powder metallurgy method and high-temperature hot pressing technology to prepare SiC/Al-Si composite materials with different SiC contents(5vol%,10vol%,15vol%,and 20vol%).The results showed that as the SiC content increased,the tensile strength of the composite material first increased and then decreased.The tensile strength was the highest when the SiC content was 15%;the sintering temperature significantly affected the composite material’s structural density and mechanical properties.Findings indicated 700℃was the optimal sintering and the optimal SiC content of SiC/Al-Si composite materials was between 10%and 15%.Besides,the sintering temperature should be strictly controlled to improve the material’s structural density and mechanical properties.

A novel recombinant adeno-associated virus vector packaging system with HSV-1 amplicon providing helper functions

A novel packaging system for producing recombinant adeno-associated virus (rAAV) vector was described. Instead of the conventional method for rAAV production by two-plasmid co-transfection followed by superinfection with adenovirus 5, an HSV-1 amplicon system expressing AAV-2 rep and cap genes from their native promoters was used to provide complete helper functions for rAAV replicating and packaging. This HSV-1 ampticon stock consisted of two kinds of infectious HSV-1 virions, a replicating-defective HSV-1 amplicon pseudovirus harboring multi-copies of AAV-2 rep and cap gene and a temperature-sensitive HSV-1 mutant strain ts-KOS. High-titer rAAV was generated with this new packaging system. This packaging system gives a simple and scaleable process for rAAV production.

Antibacterial Chitosan-Gelatin Microcapsules Modified with Green-Synthesized Silver Nanoparticles for Food Packaging

Silver nanoparticles(Ag NPs)are an effective antibacterial agent,but their application in food packaging is limited due to their easy agglomeration and oxidation.In this study,antibacterial microcapsules were fabricated using Ginkgo biloba essential oil(GBEO)as core material and chitosan and type B gelatin biopolymer as capsule mate-rials.These antibacterial microcapsules were then modified with green-synthesized Ag NPs,blended into the bio-polymer polylactic acid(PLA),and finally formed as films.Physicochemical properties and antibacterial activity against Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)were evaluated.Results showed that the prepared antibacterial PLA films exhibited excellent antibacterial activity against foodborne pathogens.Its TVC exceeded the limit value of 7 log CFU/g at 7 days compared with the 5 days of pure PLA films.Therefore,these films can extend the shelf life of grass carp fillets by 2–3 days under refrigeration.

Monitoring and identification of spoilage-related microorganisms in braised chicken with modified atmosphere packaging during refrigerated storage

This study mainly monitored the dominant bacterial populations and identified the spoilage-related microorganisms of braised chicken meat stored under different CO_(2)-modified atmosphere packaging(MAP)during refrigerated storage using a culture-dependent method and 16S rDNA identification.The quality changes and shelf life of the meat were also measured.The growth rate of total viable count(TVC)in braised chicken was slower with an increase of CO_(2) content in MAP,which also occurred in the remaining bacterial species monitored(lactic acid bacteria,Pseudomonas spp.,Brochothrix thermosphacta).The MAP exerted beneficial effects on the quality of braised chicken,as demonstrated by retarding the production of total volatile basic nitrogen(TVB-N)and delaying lipid oxidation(TBARS test).A total of 14 isolates were identified from braised chickens with different packaging at the end of storage,these included P.fragi(6 isolates),P.psychrophila(2 isolates),Enterococcus faecalis(3 isolates),B.thermosphacta(2 isolates),Staphylococcus equorum(1 isolate).

Electrospun gelatin/chitosan nanofibers containing curcumin for multifunctional food packaging

Recently,food grade nanofiber-based materials have received growing attentions in food packaging.In this work,novel active and intelligent packaging nanofibers based on gelatin/chitosan with curcumin(GA/CS/CUR)were developed via electrospinning technique.Effects of the incorporation of CUR content(0.1%-0.3%,m/m)on the microstructure and functional properties of the electrospun nanofibers were investigated.Morphological studies using scanning electron microscopy indicated that loading CUR can affect the average diameter of nanofiber mats,which remained around 160-180 nm.The addition of an appropriate level CUR(0.2%,m/m)led to a stronger intermolecular interaction,and thus enhanced the thermal stability and tensile strength of the obtained nanofibers.Meanwhile,the incorporation of CUR significantly improved antioxidant activity and the antimicrobial activity of GA/CS/CUR nanofibers.Moreover,the sensitivity of nanofibers to ammonia results indicated that GA/CS nanofibers containing 0.2%CUR(GA/CS/CURⅡ)presented high sensitivity of colorimetric behavior to ammonia(within 3 min).These results suggest GA/CS/CURⅡnanofibers has great potential as a multifunctional packaging to protect and monitor the freshness of proteinrich animal foods,such as meat and seafood.

Advances in Research of Molded Pulp for Food Packaging

The molded pulp,a product of three-dimensional papermaking technology,is environmentally friendly and has a low environmental impact due to its ability to decompose quickly in the natural environment after disposal.The application of molded pulp for food packaging can replace or reduce the use of plastic food packaging.Researchers extract fibers from plants for the production of safe and hygienic molded pulp for food packaging,and they also study and enhance the qualities of molded pulp to broaden its use in the food industry.This paper reviews the sources and varieties of plant fiber used in molded pulp for food packaging,as well as research on the improvement and optimization of the performance of molded pulp products.Additionally,issues with molded pulp’s actual use for food packaging are reviewed,along with the potential for future research.This work can serve as a reference for molded pulp applications and research in the food industry in the future.

Assessment of Moisture Permeability and Closure Systems of High Density Polyethylene Plastic Bottles Used as Primary Packaging Containers for Moisture Sensitive Medicines

Introduction: Moisture permeability and a loose closure system might allow a significant gain of moisture into container and this could lead to significant loss of potency of drug sensitive to moisture and as well promoting the growth of microorganisms. Typical examples of the drugs sensitive to moisture include Tenofovir Disoproxil Fumarate (TDF). Product claimed to be a “Tight container” does not make it a tight container until proved practically. A plastic container is tight if “not more than one of the 10 tested containers exceeds 100 mg per day per L in moisture permeability. Objectives: The goal of this study was to determine rate of moisture permeability of selected High Density Polyethylene plastic bottles for packaging of moisture sensitive medicines in particular Lamivudine/Tenofovir Disoproxil fumarate tablets. Methodology: The determination of rate of moisture permeability was achieved by assessing closure systems of plastics as per USP 37 method, while the difference in absorption pattern was achieved by assessing the spectrum obtained through transmittance by Fourier Transform-Infrared (FT-IR). The plastic bottles were randomly selected from supplier A, B and C. Results: The plastic bottles from supplier A and B had an average moisture permeability of 12.57 and 51.55 mg/day/L with none of the containers exceeding moisture permeability of 100 mg/day/L whereas containers from supplier C had an average of 149.95 mg/day/L with seven of the containers exceeding of 100 mg/day/L. Conclusion: Containers from supplier A and B met the USP specifications hence could be used as primary packaging for moisture sensitive medicines whereas the containers from supplier C did not meet the USP specifications for them to be regarded as “Tight Containers” and hence, unsuitable for packaging of moisture sensitive medicines.

On-Site Assessment of a Cryogenic Disinfectant for the Alpine Environment and Outer Packaging of Frozen Items

Objective To study the effectiveness and feasibility of cryogenic disinfectants in different cold scenarios and analyze the key points of on-site cryogenic disinfection.Methods Qingdao and Suifenhe were selected as application sites for the manual or mechanical spraying of cryogenic disinfectants.The same amount of disinfectant(3,000 mg/L)was applied on cold chain food packaging,cold chain containers,transport vehicles,alpine environments,and article surfaces.The killing log value of the cryogenic disinfectant against the indicator microorganisms(Staphylococcus aureus and Escherichia coli)was used to evaluate the on-site disinfection effect.Results When using 3,000 mg/L with an action time of 10 min on the ground in alpine regions,the surface of frozen items,cold-chain containers,and cold chain food packaging in supermarkets,all external surfaces were successfully disinfected,with a pass rate of 100%.The disinfection pass rates for cold chain food packaging and cold chain transport vehicles of centralized supervised warehouses and food processing enterprises were 12.5%(15/120),81.67%(49/60),and 93.33%(14/15),respectively;yet,the surfaces were not fully sprayed.Conclusion Cryogenic disinfectants are effective in disinfecting alpine environments and the outer packaging of frozen items.The application of cryogenic disinfectants should be regulated to ensure that they cover all surfaces of the disinfected object,thus ensuring effective cryogenic disinfection.

Cushioning Performance of Hilbert Fractal Sandwich Packaging Structures under Quasi-Static Compressions

The sandwich structure of cushioning packaging has an important influence on the cushioning performance.Mathematical fractal theory is an important graphic expression.Based on Hilbert fractal theory,a new sandwich structure was designed.The generation mechanism and recurrence formula of theHilbert fractal were expressed by Lin’s language,and the second-orderHilbert sandwich structure was constructed fromthermoplastic polyurethane.The constitutive model of the hyperelastic body was established by using the finite element method.With the unit mass energy absorption as the optimization goal,the fractal sandwich structure was optimized,and the best result was obtained when the order was 2.5 and the unit layer thickness was 0.75 mm.TheHilbert sandwich structure was compared with the rice-shaped sandwich structure commonly used in industry,and the Hilbert fractal structure had better energy absorption.This has practical significance for the development and application of newcushioning packaging structures.

Cellulose-Based Films for Food Packaging Applications:Review of Preparation,Properties,and Prospects

Packaging is a food preservation technology widely used in the world.Naturally-sourced,biodegradable polymers are becoming increasingly popular in the food packaging sector.Packagingfilms prepared using cellulose as raw material would contribute to resource sustainability,but the difficulty of cellulose solubilization limits their further development.In view of this,a series of novel solvent systems(LiCl/DMAc,ILs,TBAH/DMSO,NMMO,alkali/urea solutions,metal-complex solutions)were used to prepare high-strength and high-performance cellulose-basedfilms;their characteristics and the mechanisms involved were investigated.Compositefilms prepared by blending cellulose with various polymers(synthetic polymers,natural polymers,proteins and enzymes,metal particles,and plant phenols)and their functional properties were also investigated.Problems with cellulose-basedfilms and the outlook for future research are discussed.It is hoped that in the near future high-performance,biodegradable and sustainably-produced cellulose-basedfilms will lead the food packaging industry into a new era and further promote the sustainable use of resources.

A Novel Approach for Micro-electro-mechanical System(MEMS) Vacuum Packaging

MEMS vacuum packaging is now the impediment of the MEMS appliance in some specified fields. The major problem of current packaging approach is that the packaging process cannot meet the requirement of the ultra low leak. But the process cannot be improved with the existing technology. We propose a novel approach for MEMS vacuum packaging which can remarkably lower the leak rate. This paper analyzed the vacuum maintaining time of the vacuum packaging and compared the current design and new packaging method.

Archival Examination of the Change in Packaging Materials of Chemical Injections

Based on the deepening awareness of the risk of changing packaging materials of injections,the national regulatory authorities and the China National Pharmaceutical Packaging Association have issued the relevant guidelines and group standards for changing packaging materials in recent years,greatly improving the research and development and technical requirements of packaging materials of injections.In 2021,Guangdong Province carried out the archival examination of the change of listed drugs,among which the proportion of the acceptance of changed injection packaging materials has increased year by year.On the basis of sorting out the archival examination work and combining with the cases of changing packaging materials of chemical injections accepted by Guangdong Province during 2021-2022,the requirements and problems of archival examination were analyzed and discussed to provide a reference and idea for applicants when studying the change in packaging materials.

Distribution of 26 Metals in the Waters of the Aquatic Ecosystems of the Cotonou Channel and Lake Nokoué, Benin

Metallic elements have various origins: natural and anthropogenic sources as geochemical, marine and atmospheric sources resulting from the fallout of pollutants emitted or dust raised and which are transported by water and air currents. Thus marine, brackish and fresh continental waters may have high metal concentrations. In addition, some essential metals can become toxic above certain concentration values in aquatic environments. The aquatic ecosystems of Cotonou channel and lake Nokoué receive the pollutants charges from the town cities of Cotonou, Abomey-Calavi and town hall of So Ava. The aim of this study is to analyze waters from Eighteen (18) stations identified in the two ecosystems (nine by ecosystem). The concentrations of magnesium (Mg), calcium (Ca), vanadium (V), chromium (Cr), manganese (Mn), iron (Fe), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), selenium (Se), cadmium (Cd), beryllium (Be), aluminum (Al), strontium (Sr), molybdenum (Mo), silver (Ag), tin (Sn), barium (Ba), platinum (Pt), mercury (Hg), thallium (Tl), lead (Pb), thorium (Th) and uranium (U) were measured after acid digestion of the water samples using the inductively coupled plasma source mass spectrometer (ICP-MS). The results of the analyses indicate an unequal distribution of metals in the different ecosystems. However, atypical concentrations were observed at some stations of the lake and the channel. Magnesium, calcium and manganese have very high values in Lake Nokoué respectively at Ganvié market station GAN_M (2990 ± 105 mg/L), Ganvié center, station GAN_C (4991 ± 177 mg/L) and Lake middle station MLak4 (10662 ± 17.03 μg/L). On the other hand, iron, aluminum and strontium have very high concentrations in the Cotonou Channel respectively at Agbato station AGB (5236 ± 103 and 8289 ± 519 μg/L) and at the estuary station EST (6118 ± 68 μg/L). The concentrations were compared to wells and cborehole waters in sixth neighborhood of Cotonou. We have used statistical analyzers such as MANOVA which have made it possible to classify the waters and metals in the ecosystems studied compared to groundwater and Well water waters. We use hierarchical clustering on principal components to identify similarities between stations based on metal concentration with R software packages “FactoMineR” and “factoextra”. In general, we can conclude that most of the metals have an anthropogenic source except strontium and major elements (Ca and Mg) which could respectively provide from marine waters and geochemical sources.

Research Status and Prospects of Bio-based Materials for Grease Barrier Coatings on Paper Food Packaging

Increased environmental and health concerns over the use of plastic packaging or fluorine-containing coatings,in combination with increased market demand for products with a longer shelf life,make bio-based materials one of the most important research candidates for alternative paper packaging materials for oil resistance.These bio-based materials have excellent oxygen and oil barriers,which are critical for food packaging.Moreover,they are biodegradable,naturally renewable,and safe.In this artical,two main groups of bio-based oil repellents for paper food packaging,including polysaccharide-based biopolymers and protein-based biopolymers,are enumerated,and the advantages and weaknesses of bio-based oil repellents are discussed,and effective solutions are proposed.Finally,research status and prospects on the development of bio-based oil-resistant coatings for the food packaging industry are presented.

Analysis on the Development of Cigarette Packaging in the Era of Intelligence

China is one of the biggest countries in cigarette production and sales,therefore it is important to improve the quality and efficiency of cigarette production.As cigarette packaging is an important part in cigarette production,therefore,it is important to strengthen research on improving the quality of cigarette packaging.This article summarizes the development process of cigarette packaging in China,introduces the development of printing technology in the era of intelligence,summarizes the application of printing technology in cigarette packaging,analyzes and explores the development trend of cigarette packaging in the era of intelligence,with the hope to provide reference for practitioners.

Literature Review of Electronic Packaging Technology and Residual Stress

The rapid development of the electronic information industry brings to the irreplaceable role of electronic components, therefore the search of a more reliable packaging material has become increasingly important. In the electronic packaging system, the failure phenomenon caused by residual stress is one of the key factors restricting the development of electronic packaging technology. In order to use the in-situ characterization technology to explore the residual stress inducing mechanism and failure mechanism of epoxy-based advanced packaging materials, this paper gives a review of related previous research, and lays a theoretical foundation for the upcoming research. The classification and generation mechanism of residual stress are clarified in this paper, which provides data support for future related research.