Moment magnitudes of two large Turkish earthquakes on February 6,2023 from long-period coda

Two large earthquakes(an earthquake doublet)occurred in south-central Turkey on February 6,2023,causing massive damages and casualties.The magnitudes and the relative sizes of the two mainshocks are essential information for scientific research and public awareness.There are obvious discrepancies among the results that have been reported so far,which may be revised and updated later.Here we applied a novel and reliable long-period coda moment magnitude method to the two large earthquakes.The moment magnitudes(with one standard error)are 7.95±0.013 and 7.86±0.012,respectively,which are larger than all the previous reports.The first mainshock,which matches the largest recorded earthquakes in the Turkish history,is slightly larger than the second one by 0.11±0.035 in magnitude or by 0.04 to 0.18 at 95%confidence level.

Earthquake Magnitude Probability and Gamma Distribution

The earthquake magnitude probability distribution is one of the underlying input data for certain earthquake analyses, such as probabilistic seismic hazard analysis. Nowadays, the method proposed by McGuire and Arabasz (1990) is commonly used for obtaining the (simulated) earthquake magnitude probability distributions. However, based on the observed earthquake data in 5 regions (Taiwan, Japan, California, Turkey, and Greece), the model did not fit the observation well. Instead, all of the case studies show that using the newly proposed gamma distribution can improve the simulation significantly compared to the conventional method.

Magnitude and distance distribution of strong aftershocks in Sichuan-Yunnan region

研究了川滇地区1966年以来12次主震震级Ms≥6.5的地震序列中，主震与强余震（本文定义为所有Ms≥5的余震）震级差分布特征和强余震与主震距离的分布特征。结果表明，强余震与主震震级差服从截断的指数分布，据此推导出了强余震与主震震级差的概率密度函数；强余震距离分布的优势范围是距主震10-39km，且强余震与主震震中的距离服从正态分布。

Earthquake probabilities and magnitude distribution (M ≥ 6.7) along the Haiyuan fault, northwestern China

In recent years, some researchers have studied the paleoearthquake along the Haiyuan fault and revealed a lot of paleoearthquake events. All available information allows more reliable analysis of earthquake recurrence interval and earthquake rupture patterns along the Haiyuan fault. Based on this paleoseismological information, the recur- rence probability and magnitude distribution for M≥6.7 earthquakes in future 100 years along the Haiyuan fault can be obtained through weighted computation by using Poisson and Brownian passage time models and consid- ering different rupture patterns. The result shows that the recurrence probability of MS≥6.7 earthquakes is about 0.035 in future 100 years along the Haiyuan fault.

Definition,epidemiology and magnitude of alcoholic hepatitis

Alcoholic liver disease(ALD) is a major cause of alcoholrelated morbidity and mortality.Its presentation ranges from fatty liver to alcoholic hepatitis(AH),cirrhosis,and hepatocellular carcinoma.Although the amount and pattern of alcohol consumption is a well recognized predisposing factor for the development of serious liver pathology,environmental factors and the host's genetic makeup may also play significant roles that have not yet been entirely explored.Continuing alcohol consumption is a major factor that influences the survival of patients with AH.The presence of cirrhosis at presentation or its development on follow up is a major factor determining the outcome in the long run.This chapter deals with the epidemiology and magnitude of ALD in general and AH in particular.

Earthquake probabilities and magnitude distribution (M≥6.7) along the Haiyuan fault, northwestern China

In recent years, some researchers have studied the paleoearthquake along the Haiyuan fault and revealed a lot of paleoearthquake events. All available information allows more reliable analysis of earthquake recurrence interval and earthquake rupture patterns along the Haiyuan fault. Based on this paleoseismological information, the recur- rence probability and magnitude distribution for M≥6.7 earthquakes in future 100 years along the Haiyuan fault can be obtained through weighted computation by using Poisson and Brownian passage time models and consid- ering different rupture patterns. The result shows that the recurrence probability of MS≥6.7 earthquakes is about 0.035 in future 100 years along the Haiyuan fault.

Magnitude-frequency relationship of debris flows in the Jiangjia Gully, China

The magnitude-frequency(MF) relationship of debris flows is the basis for engineering designs and risk quantification. However, because of the lack of debris flow monitoring data, research progress in this area has been relatively slow. The MF relationship of debris flows in Jiangjia Gully, Yunnan Province was evaluated based on a regression analysis of 178 debris flow events that occurred from 1987-2004. The magnitude-cumulative frequency(MCF) relationship of the debris flows in the Jiangjia Gully is consistent with the linear logarithmic transformation function. Moreover, observed data for debris flows in Hunshui Gully of Yunnan Province and Huoshao Gully, Liuwan Gully, and Niwan Gully of Gansu Province were used to verify the function. The results showed that the MCF relationship of highfrequency debris flows is consistent with the power law equation, although the regression coefficients in the equation are considerably different. Further analysis showed a strong correlation between the differences in the constants and the drainage area and daily maximum precipitation.

Expected magnitude and distance of potential source area and the estimating method

Magnitude and distance of major potential source are needed in order to determine duration time of artificial ground motion and to determine the type of response spectrum (near field or far field) when using the seismic intensity zonation map. The magnitude probabilistic distribution function of seismic belt and the magnitude and space joint distribution function for given intensity of the site in a potential Source are provided. Then the basicformula of calculating expected magnitude and expected distance are developed. Several examples for calculating expected magnitude and expected distance in northern China are discussed. These results show that expected magnitude and expected distance are related not only to geometry of potential source and magnitude but also to the intensity of the site with certain exceeding probability.

Relationships between moment magnitude and fault parameters:theoretical and semi-empirical relationships

Fault parameters are important in earthquake hazard analysis.In this paper,theoretical relationships between moment magnitude and fault parameters including subsurface rupture length,downdip rupture width,rupture area,and average slip over the fault surface are deduced based on seismological theory.These theoretical relationships are further simplified by applying similarity conditions and an unique form is established.Then,combining the simplified theoretical relationships between moment magnitude and fault parameters with seismic source data selected in this study,a practical semi-empirical relationship is established.The seismic source data selected is also to used to derive empirical relationships between moment magnitude and fault parameters by the ordinary least square regression method.Comparisons between semi-empirical relationships and empirical relationships show that the former depict distribution trends of data better than the latter.It is also observed that downdip rupture widths of strike slip faults are saturated when moment magnitude is more than 7.0,but downdip rupture widths of dip slip faults are not saturated in the molnent magnitude rangcs of this study.

Magnitude错误标准下m元非对称错纠错码的构造(英文)

基于多项式的剩余类环理论,给出了magnitude错误标准下m元可纠小于等于t个非对称错纠错码的构造方法.由此构造方法给出了这类码码字个数的下界.

Bh序列和Magnitude错误标准下m元纠错码构造

文献对Bh序列和Magnitude错误标准下m元t-sEC/AUED码的关系进行了讨论,在此基础上提出了一种Magnitude错误标准下m元可纠t个对称错的纠错码的构造方法,并相应地给出了可纠t个对称错的纠错码码字个数的下界。

Moment Magnitude and Its Calculation

In this paper,we give a brief introduction to the proposal and development history of the earthquake magnitude concept. Moment magnitude MWis the best physical quantity for measuring earthquakes. Compared with other magnitude scales used traditionally,moment magnitude is not saturated for all earthquakes,regardless of big and small earthquakes,deep and shallow earthquakes,far field and near field seismic data,geodetic and geological data,moment magnitude can be measured,and can be connected with wellknown magnitude scales such as surface wave magnitude MS. Moment magnitude is a uniform magnitude scale,which is suitable for statistics with wide magnitude range.Moment magnitude is the preferred magnitude selected by the International Seismological community,and it is preferred by the departments responsible for publishing seismic information to the public. Moment magnitude is a uniform magnitude scale,which is suitable for statistics with wide magnitude range. Moment magnitude is a preferred magnitude for international seismology,it is preferred by the agency responsible for providing information about earthquakes to the public. We provide all formulas used in the calculation of moment magnitude,and the calculation steps in detail. We also analyzed some problems and rules to solve these problems by using different formulas and numerical value calculation steps.

Determination of the local magnitudes of small earthquakes using a dense seismic array in the Changning-Zhaotong Shale Gas Field,Southern Sichuan Basin

With the development of unconventional shale gas in the southern Sichuan Basin,seismicity in the region has increased significantly in recent years.Though the existing sparse regional seismic stations can capture most earthquakes with ML≥2.5,a great number of smaller earthquakes are often omitted due to limited detection capacity.With the advent of portable seismic nodes,many dense arrays for monitoring seismicity in the unconventional oil and gas fields have been deployed,and the magnitudes of those earthquakes are key to understand the local fault reactivation and seismic potentials.However,the current national standard for determining the local magnitudes was not specifically designed for monitoring stations in close proximity,utilizing a calibration function with a minimal resolution of 5 km in the epicentral distance.That is,the current national standard tends to overestimate the local magnitudes for stations within short epicentral distances,and can result in discrepancies for dense arrays.In this study,we propose a new local magnitude formula which corrects the overestimated magnitudes for shorter distances,yielding accurate event magnitudes for small earthquakes in the Changning-Zhaotong shale gas field in the southern Sichuan Basin,monitored by dense seismic arrays in close proximity.The formula is used to determine the local magnitudes of 7,500 events monitored by a two-phased dense array with several hundred 5 Hz 3 C nodes deployed from the end of February 2019 to early May 2019 in the Changning-Zhaotong shale gas field.The magnitude of completeness(MC)using the dense array is-0.1,compared to MC 1.1 by the sparser Chinese Seismic Network(CSN).In addition,using a machine learning detection and picking procedure,we successfully identify and process some 14,000 earthquakes from the continuous waveforms,a ten-fold increase over the catalog recorded by CSN for the same period,and the MC is further reduced to-0.3 from-0.1 compared to the catalog obtained via manual processing using the same dense array.The proposed local magnitude formula can be adopted for calculating accurate local magnitudes of future earthquakes using dense arrays in the shale gas fields of the Sichuan Basin.This will help to better characterize the local seismic risks and potentials.

Last Deglacial Soft-Sediment Deformation at Shawan on the Eastern Tibetan Plateau and Implications for Deformation Processes and Seismic Magnitudes

The eastern margin of the Tibetan Plateau is characterized by frequent earthquakes; however, research of paleo-earthquakes in the area has been limited^ owing to the alpine topography and strong erosion. Detailed investigations of soft-sediment deformation(SSD) structures are valuable for understanding the trigger mechanisms, deformation processes, and the magnitudes of earthquakes that generate such structures, and help us to understand tectonic activity in the region. To assess tectonic activity during the late Quaternary, we studied a well-exposed sequence of Shawan lacustrine sediments, 7.0 m thick, near Lake Diexi in the upper reaches of the Minjiang River. Deformation is recorded by both ductile structures(load casts, flame structures,pseudonodules, ball-and-pillow structures, and liquefied convolute structures) and brittle structures(liquefied breccia, and microfaults). Taking into account the geodynamic setting of the area and its known tectonic activity, these SSD structures can be interpreted in terms of seismic shocks. The types and forms of the structures,the maximum liquefaction distances, and the thicknesses of the horizons with SSD structures in the Shawan section indicate that they record six strong earthquakes of magnitude 6-7 and one with magnitude >7. A recent study showed that the Songpinggou fault is the seismogenic structure of the 1933 Ms7.5 Diexi earthquake. The Shawan section is located close to the junction of the Songpinggou and Minjiang faults, and records seven earthquakes with magnitudes of ?7. We infer,therefore, that the SSD structures in the Shawan section document deglacial activity along the Songpinggou fault.

Quasi-real time inversion method of three-dimensional epicenter coordinate, trigger time, and magnitude based on CORS

This study explores the quasi-real time inversion principle and precision estimation of three-dimensional coordinates of the epicenter, trigger time and magnitude of earthquakes with the aim to improve traditional methods, which are flawed due to missing information or distortion in the seismograph records. The epicenter, trigger time and magnitude from the Lushan earthquake are inverted and analyzed based on high-frequency GNSS data. The inversion results achieved a high precision, which are consistent with the data published by the China Earthquake Administration. Moreover, it has been proven that the inversion method has good theoretical value and excellent application prospects.

Investigation of Induced Unbalance Magnitude on Dynamic Characteristics of High-speed Turbocharger with Floating Ring Bearings

Due to operational wear and uneven carbon absorption in compressor and turbine wheels, the unbalance(me) vibration is induced and could lead to sub?synchronous vibration accidents for high?speed turbocharger(TC). There are very few research works that focus on the magnitude e ects on such induced unbalance vibration. In this paper, a finite element model(FEM) is developed to characterize a realistic automotive TC rotor with floating ring bearings(FRBs). The nonlinear dynamic responses of the TC rotor system with di erent levels of induced unbalance magni?tude in compressor and turbine wheels are calculated. From the results of waterfall and response spectral intensity plots, the bifurcation and instability phenomena depend on unbalance magnitude during the startup of TC. The sub?synchronous component 0.12× caused rotor unstable is the dominant frequency for small induced unbalance. The nonlinear e ects of induced unbalance in the turbine wheel is obvious stronger than the compressor wheel. As the unbalance magnitude increases from 0.05 gbration 1·mm to 0.2 g·mm, the vibration component changes from mainly 0.12× to synchronous vi×. When unbalance increases continuously, the rotor vibration response amplitude is rapidly growing and the 1× caused by the large unbalance excitation becomes the dominant frequency. A suitable un?balance magnitude of turbine wheel and compressor wheel for the high?speed TC rotor with FRBs is proposed: the value of induced un?balance magnitude should be kept around 0.2 g·mm.

Stochastic Approximate Solutions of Stochastic Differential Equations with Random Jump Magnitudes and Non-Lipschitz Coefficients

A class of stochastic differential equations with random jump magnitudes( SDEwRJMs) is investigated. Under nonLipschitz conditions,the convergence of semi-implicit Euler method for SDEwRJMs is studied. The main purpose is to prove that the semi-implicit Euler solutions converge to the true solutions in the mean-square sense. An example is given for illustration.

Study on Variation of Fitting Goodness of Relation Between Earthquake Frequency and Magnitude before Moderately Strong Earthquakes (Ms≥5.0)

In this paper,characteristics of spatial and temporal variation of linear fitting goodness before some moderately strong earthquakes(Ms≥5.0)in the eastern part of China(east of longitude 180)are studied according to the famous Gutenberg-Richter’s relation expressed as lgN=a-bM,by using the moderate and small events that occurred in and around the source area.The results show that the linear goodness of fitting varies abnormally prior to these moderately strong earthquakes.In the early stage of the earthquake preparatory process,distribution of the energy released through small events in and around the source area is isostatic and the fitting goodness approximates 1,while the distribution of the energy turns to be isostatic before moderately strong earthquakes,leading to the obvious decrease of the linear goodness of fitting.This phenomenon could be a medium term anomaly and a medium term criterion for moderately strong earthquake prediction.

Fast magnitude determination using a single seismological station record implementing machine learning techniques

In this work a Support Vector Machine Regression（SVMR） algorithm is used to calculate local magnitude（MI） using only five seconds of signal after the P wave onset of one three component seismic station. This algorithm was trained with 863 records of historical earthquakes, where the input regression parameters were an exponential function of the waveform envelope estimated by least squares and the maximum value of the observed waveform for each component in a single station. Ten-fold cross validation was applied for a normalized polynomial kernel obtaining the mean absolute error for different exponents and complexity parameters. The local magnitude（MI） could be estimated with 0.19 units of mean absolute error. The proposed algorithm is easy to implement in hardware and may be used directly after the field seismological sensor to generate fast decisions at seismological control centers, increasing the possibility of having an effective reaction.

Study on the Calibration Function of Local Earthquake Magnitude in the Gansu Region

To calculate the deviations between single station magnitudes and average ones by the magnitude residual statistical method,the paper selects 13086 seismic events recorded by the Gansu broadband digital seismic network from January 2009 to December 2012. The frequency distribution and quantitative statistics of the deviations of earthquake magnitude are analyzed. The MLcalibration function is modified and a uniform local magnitude system characteristic of the Gansu region,is obtained.