In this study, effects of different nanoparticles and porosity of absorber tube on the performance of a Concentrating Parabolic Solar Collector(CPSC) were investigated. A section of porous-filled absorber tube was mod...In this study, effects of different nanoparticles and porosity of absorber tube on the performance of a Concentrating Parabolic Solar Collector(CPSC) were investigated. A section of porous-filled absorber tube was modeled as a semi-circular cavity under the solar radiation which is filled by nanofluids and the governing equations were solved by FlexPDE numerical software. The effect of four physical parameters, nanoparticles type, nanoparticles volume fraction(φ), Darcy number(Da) and Rayleigh number(Ra), on the Nusselt number(Nu) was discussed. It turns out that Cu nanoparticle is the most suitable one for such solar collectors, compared to the commonly used Fe_3O_4, Al_2O_3, TiO_2.With the increased addition of Cu nanoparticles all the parameters φ, Da and Ra shows a significant increase against the Nu, indicates the enhanced heat transfer in such cases. As a result, low concentration of Cu nanoparticle suspension combined with porous matrix was supposed to be beneficial for the performance enhancement of concentrating parabolic solar collector.展开更多
A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC...A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.展开更多
Parabolic trough solar collector systems are the most advanced concentrating solar power technology for large-scale power generation purposes. The current work reviews various selective coating materials and their cha...Parabolic trough solar collector systems are the most advanced concentrating solar power technology for large-scale power generation purposes. The current work reviews various selective coating materials and their characteristics for different designs in concentrating solar power. Solar selective absorbing coatings collect solar radiation and convert it to heat. To promote higher efficiency and lower energy costs at higher temperatures requires, this study aims to analyse the fundamental chemistry and thermal stability of some key coatings currently being used and even under investigation to find reasons for differences, information gaps and potential for improvement in results. In recent years, several novel and useful solar absorber coatings have been developed. However, qualification test methods such as corrosion resistance, thermal stability testing and prediction of service life, which have essential technical value for large-scale solar absorbers, are lacking. Coatings are used to enhance the performance of reflectors and absorbers in terms of quality, efficiency, maintenance and cost. Differentiated coatings are required as there are no uniformly perfect materials in various applications, working conditions and material variations. Much more knowledge of the physical and chemical properties and durability of the coatings is required, which will help prevent failures that could not be discovered previously.展开更多
In this study,a parametric analysis was performed of a supercritical organic Rankine cycle driven by solar parabolic trough collectors(PTCs)coupled with a vapour-compression refrigeration cycle simultaneously for cool...In this study,a parametric analysis was performed of a supercritical organic Rankine cycle driven by solar parabolic trough collectors(PTCs)coupled with a vapour-compression refrigeration cycle simultaneously for cooling and power production.Thermal efficiency,exergy efficiency,exergy destruction and the coefficient of performance of the cogeneration system were considered to be performance parameters.A computer program was developed in engineering equation-solver software for analysis.Influences of the PTC design parameters(solar irradiation,solar-beam incidence angle and velocity of the heat-transfer fluid in the absorber tube),turbine inlet pressure,condenser and evaporator temperature on system performance were discussed.Furthermore,the performance of the cogeneration system was also compared with and without PTCs.It was concluded that it was necessary to design the PTCs carefully in order to achieve better cogeneration performance.The highest values of exergy efficiency,thermal efficiency and exergy destruction of the cogeneration system were 92.9%,51.13%and 1437 kW,respectively,at 0.95 kW/m2 of solar irradiation based on working fluid R227ea,but the highest coefficient of performance was found to be 2.278 on the basis of working fluid R134a.It was also obtained from the results that PTCs accounted for 76.32%of the total exergy destruction of the overall system and the cogeneration system performed well without considering solar performance.展开更多
基金financial support of the National Natural Science Foundation of China (No.51422604,51776165)China Postdoctoral Science Foundation (No.2017M610638)
文摘In this study, effects of different nanoparticles and porosity of absorber tube on the performance of a Concentrating Parabolic Solar Collector(CPSC) were investigated. A section of porous-filled absorber tube was modeled as a semi-circular cavity under the solar radiation which is filled by nanofluids and the governing equations were solved by FlexPDE numerical software. The effect of four physical parameters, nanoparticles type, nanoparticles volume fraction(φ), Darcy number(Da) and Rayleigh number(Ra), on the Nusselt number(Nu) was discussed. It turns out that Cu nanoparticle is the most suitable one for such solar collectors, compared to the commonly used Fe_3O_4, Al_2O_3, TiO_2.With the increased addition of Cu nanoparticles all the parameters φ, Da and Ra shows a significant increase against the Nu, indicates the enhanced heat transfer in such cases. As a result, low concentration of Cu nanoparticle suspension combined with porous matrix was supposed to be beneficial for the performance enhancement of concentrating parabolic solar collector.
文摘A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.
基金supported by the Stipendium Hungaricum Programby the Doctoral School of Mechanical Engineering,Hungarian University of Agriculture and Life Sciences,Godollo,Hungary。
文摘Parabolic trough solar collector systems are the most advanced concentrating solar power technology for large-scale power generation purposes. The current work reviews various selective coating materials and their characteristics for different designs in concentrating solar power. Solar selective absorbing coatings collect solar radiation and convert it to heat. To promote higher efficiency and lower energy costs at higher temperatures requires, this study aims to analyse the fundamental chemistry and thermal stability of some key coatings currently being used and even under investigation to find reasons for differences, information gaps and potential for improvement in results. In recent years, several novel and useful solar absorber coatings have been developed. However, qualification test methods such as corrosion resistance, thermal stability testing and prediction of service life, which have essential technical value for large-scale solar absorbers, are lacking. Coatings are used to enhance the performance of reflectors and absorbers in terms of quality, efficiency, maintenance and cost. Differentiated coatings are required as there are no uniformly perfect materials in various applications, working conditions and material variations. Much more knowledge of the physical and chemical properties and durability of the coatings is required, which will help prevent failures that could not be discovered previously.
基金support of Department of Mechanical,Industrial&Production,Automobile Engineering of the Delhi Technological University,New Delhi,India.
文摘In this study,a parametric analysis was performed of a supercritical organic Rankine cycle driven by solar parabolic trough collectors(PTCs)coupled with a vapour-compression refrigeration cycle simultaneously for cooling and power production.Thermal efficiency,exergy efficiency,exergy destruction and the coefficient of performance of the cogeneration system were considered to be performance parameters.A computer program was developed in engineering equation-solver software for analysis.Influences of the PTC design parameters(solar irradiation,solar-beam incidence angle and velocity of the heat-transfer fluid in the absorber tube),turbine inlet pressure,condenser and evaporator temperature on system performance were discussed.Furthermore,the performance of the cogeneration system was also compared with and without PTCs.It was concluded that it was necessary to design the PTCs carefully in order to achieve better cogeneration performance.The highest values of exergy efficiency,thermal efficiency and exergy destruction of the cogeneration system were 92.9%,51.13%and 1437 kW,respectively,at 0.95 kW/m2 of solar irradiation based on working fluid R227ea,but the highest coefficient of performance was found to be 2.278 on the basis of working fluid R134a.It was also obtained from the results that PTCs accounted for 76.32%of the total exergy destruction of the overall system and the cogeneration system performed well without considering solar performance.