The organic geochemistry of crude oil in the Saltpond Basin(Ghana):Organic source input,depositional environment,and thermal maturity

The Saltpond Basin,situated within the South Atlantic margin of Ghana,is a significant area for petro-leum exploration but has received relatively limited research attention.Previous studies have examined source rock com-position,but data on crude oil organic chemistry are lack-ing,hindering understanding of the basin’s petroleum system and evolution.To address this gap,we analyzed biomarkers and stable carbon-isotope ratios in Saltpond Basin crude oil using gas chromatography–mass spectrometry and gas chromatography–isotope ratio mass spectrometry to eluci-date organic matter source,depositional environment,and thermal maturity.Findings were compared with oils from the West African segment of the South Atlantic margin,namely the Tano Basin and the Niger Delta Basin,to iden-tify potential correlations and gain insights into regional variations.Molecular and isotopic results unveiled a sig-nificant prevalence of organic matter derived from lower marine organisms.Patterns of organic matter deposition and preservation in Saltpond oil samples suggested a suboxic marine transitional environment,contradicting conventional understanding of terrestrial dominance in such settings.Moreover,the potential for degradation processes to obscure differentiation between terrestrial and marine organic mat-ter origins underscores the complex nature of organic mat-ter dynamics in transitional marine environments.Analysis of molecular thermal maturity indices suggested Saltpond oils were expelled from source rocks exhibiting thermal maturity at the early maturity stage.Correlation analysis unveiled genetic disparities among crude oils sourced from the Saltpond Basin and those from the Tano and Niger Delta Basin,primarily due to variations in source input and depo-sitional environment conditions.Saltpond oil exhibits lower terrestrial organic input than Tano Basin’s crude oils,which also have less terrestrial input than Niger Delta Basin crude oils.Additionally,its paleodepositional environment nota-bly differs from oils in the Tano Basin(anoxic transitional marine-lacustrine settings)and the Niger Delta Basin(sub-oxic–oxic terrigenous deltaic or marine or lacustrine envi-ronments).Thermal maturity range of Saltpond oil is com-parable to oils in the Tano Basin but lower than oils in the Niger Delta Basin.Thesefindings provide valuable insights into petroleum generation history and unique organic geo-chemical characteristics within the Saltpond Basin,essen-tial for exploration,production,and environmental manage-ment efforts in the region.Furthermore,correlation studies provide evidence that distinct biological,geological,and paleoenvironmental conditions shaped various oil types in the West African segment of the South Atlantic margin.

Biomineralization of soil with crude soybean urease using different calcium salts

Calcium salt is an important contributing factor for calcium-based biomineralization.To study the effect of calcium salt on soil biomineralization using crude soybean urease,the calcium salts,including the calcium chloride (CaCl_(2)),calcium acetate ((CH_(3)COO)_(2)Ca) and calcium nitrate (Ca(NO_(3))_(2)),were used to prepare the biotreatment solution to carry out the biomineralization tests in this paper.Two series of biomineralization tests in solution and sand column,respectively,were conducted.Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were performed to determine the microscopic characteristics of the precipitated calcium carbonate (CaCO_(3)) crystals.The experimental results indicate that the biomineralization effect is the best for the CaCl2 case,followed by (CH_(3)COO)_(2)Ca,and worst for Ca(NO_(3))_(2) under the test conditions of this study (i.e.1 mol/L of calcium salt-urea).The mechanism for the effect of the calcium salt on the biomineralization of crude soybean urease mainly involves: (1) inhibition of urease activity,and (2) influence on the crystal size and morphology of CaCO_(3).Besides Ca^(2+) ,the anions in solution can inhibit the activity of crude soybean urease,and NO_(3)− has a stronger inhibitory effect on the urease activity compared with both CH_(3)COO^(−) and Cl^(−) .The co-inhibition of Ca^(2+) and NO_(3)− on the activity of urease is the key reason for the worst biomineralization of the Ca(NO_(3))_(2) case in this study.The difference in biomineralization between the CaCl_(2) and (CH_(3)COO)_(2) Ca cases is strongly correlated with the crystal morphology of the precipitated CaCO_(3).

Data-driven Wasserstein distributionally robust chance-constrained optimization for crude oil scheduling under uncertainty

Crude oil scheduling optimization is an effective method to enhance the economic benefits of oil refining.But uncertainties,including uncertain demands of crude distillation units(CDUs),might make the production plans made by the traditional deterministic optimization models infeasible.A data-driven Wasserstein distributionally robust chance-constrained(WDRCC)optimization approach is proposed in this paper to deal with demand uncertainty in crude oil scheduling.First,a new deterministic crude oil scheduling optimization model is developed as the basis of this approach.The Wasserstein distance is then used to build ambiguity sets from historical data to describe the possible realizations of probability distributions of uncertain demands.A cross-validation method is advanced to choose suitable radii for these ambiguity sets.The deterministic model is reformulated as a WDRCC optimization model for crude oil scheduling to guarantee the demand constraints hold with a desired high probability even in the worst situation in ambiguity sets.The proposed WDRCC model is transferred into an equivalent conditional value-at-risk representation and further derived as a mixed-integer nonlinear programming counterpart.Industrial case studies from a real-world refinery are conducted to show the effectiveness of the proposed method.Out-of-sample tests demonstrate that the solution of the WDRCC model is more robust than those of the deterministic model and the chance-constrained model.

Low crude protein formulation with supplemental amino acids for its impacts on intestinal health and growth performance of growing-finishing pigs

Background Low crude protein(CP)formulations with supplemental amino acids(AA)are used to enhance intestinal health,reduce costs,minimize environmental impact,and maintain growth performance of pigs.However,extensive reduction of dietary CP can compromise growth performance due to limited synthesis of non-essential AA and limited availability of bioactive compounds from protein supplements even when AA requirements are met.Moreover,implementing a low CP formulation can increase the net energy(NE)content in feeds causing excessive fat deposition.Additional supplementation of functional AA,coupled with low CP formulation could further enhance intestinal health and glucose metabolism,improving nitrogen utilization,and growth performance.Three experiments were conducted to evaluate the effects of low CP formulations with supplemental AA on the intestinal health and growth performance of growing-finishing pigs.Methods In Exp.1,90 pigs(19.7±1.1 kg,45 barrows and 45 gilts)were assigned to 3 treatments:CON(18.0%CP,supplementing Lys,Met,and Thr),LCP(16.0%CP,supplementing Lys,Met,Thr,Trp,and Val),and LCPT(16.1%CP,LCP+0.05%SID Trp).In Exp.2,72 pigs(34.2±4.2 kg BW)were assigned to 3 treatments:CON(17.7%CP,meeting the requirements of Lys,Met,Thr,and Trp);LCP(15.0%CP,meeting Lys,Thr,Trp,Met,Val,Ile,and Phe);and VLCP(12.8%CP,meeting Lys,Thr,Trp,Met,Val,Ile,Phe,His,and Leu).In Exp.3,72 pigs(54.1±5.9 kg BW)were assigned to 3 treatments and fed experimental diets for 3 phases(grower 2,finishing 1,and finishing 2).Treatments were CON(18.0%,13.8%,12.7%CP for 3 phases;meeting Lys,Met,Thr,and Trp);LCP(13.5%,11.4%,10.4%CP for 3 phases;meeting Lys,Thr,Trp,Met,Val,Ile,and Phe);and LCPG(14.1%,12.8%,11.1%CP for 3 phases;LCP+Glu to match SID Glu with CON).All diets had 2.6 Mcal/kg NE.Results In Exp.1,overall,the growth performance did not differ among treatments.The LCPT increased(P<0.05)Claudin-1 expression in the duodenum and jejunum.The LCP and LCPT increased(P<0.05)CAT-1,4F2hc,and B0AT expressions in the jejunum.In Exp.2,overall,the VLCP reduced(P<0.05)G:F and BUN.The LCP and VLCP increased(P<0.05)the backfat thickness(BFT).In Exp.3,overall,growth performance and BFT did not differ among treatments.The LCPG reduced(P<0.05)BUN,whereas increased the insulin in plasma.The LCP and LCPG reduced(P<0.05)the abundance of Streptococcaceae,whereas the LCP reduced(P<0.05)Erysipelotrichaceae,and the alpha diversity.Conclusions When implementing low CP formulation,CP can be reduced by supplementation of Lys,Thr,Met,Trp,Val,and Ile without affecting the growth performance of growing-finishing pigs when NE is adjusted to avoid increased fat deposition.Supplementation of Trp above the requirement or supplementation of Glu in low CP formulation seems to benefit intestinal health as well as improved nitrogen utilization and glucose metabolism.

Heavy Metal Levels and Ecological Risk in Crude Oil-Contaminated Soils from Okpare-Olomu, Niger Delta, Nigeria

Crude oil spills have inflicted extensive disruption upon the Niger Delta ecosystem, resulting in crop loss and severe environmental damage. Such spills exacerbate heavy metal concentration within soil due to the presence of metallic ions. The Okpare-Olomu community has borne the brunt of crude oil pollution from illicit bunkering, sabotage, and equipment malfunction. This study targets an evaluation of ecological hazards linked to heavy metals (HMs) in crude oil impacted agriculturally soils within Okpare-Olomu in Ughelli South LGA of Delta State. In this study, 24 topsoil samples were obtained from areas affected by crude oil pollution;the heavy metal content was evaluated through atomic absorption spectrometry. The concentration ranges for HMs (mg/kg) in soil were: 24.1 - 23,174 (Cu);0.54 - 37.1 (Cd);9.05 - 54 (Cr);12 - 174 (Ni);18.5 - 8611 (Pb);and 148 - 9078 (Zn) at a soil depth of 0 - 15 cm. Notably, metal concentrations were recorded to be above permissible World Health Organization limits. Predominantly, Zn and Pb recorded higher heavy metal concentration when compared to other heavy metals analysed, notably at sampling points PT7 through PT24. Zinc and Pb contamination exhibited highly significant contamination factors, and contamination severity was evidenced across all sample points, signifying a grave risk level. Pollution load indices indicated pervasive extreme pollution levels. Geoaccumulation indices signaled moderate to strong pollution, mainly by Pb and Zn. Ecological risk assessments revealed variable levels of heavy metal contamination, from low to very high, with potential ecological risk reflecting markedly elevated levels. This study underscores the imperative for soil remediation to rectify ecological imbalances in agriculturally affected soil constituents.

Research on a TOPSIS energy efficiency evaluation system for crude oil gathering and transportation systems based on a GA-BP neural network

As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.

Optimization of Diesel and Crude Oil Degradation in a Ghanaian Soil Using Organic Wastes as Amendment

Soil contamination by hydrocarbons poses numerous environmental, health and agricultural problems. The degradation of these pollutants can occur naturally but very slowly. It is therefore generally necessary to stimulate this degradation by different means. Thus, this study aimed to improve the bio-degradation of diesel and crude oil in a Ghanaian soil by biostimulation. For this, the sampled soil was characterized by standard methods and contaminated with diesel and crude oil at a proportion of 1% (w/w). Then, contaminated soil samples were supplemented with biochar-compost, poultry manure or cow dung at the proportion of 10% (w/w). Periodically, fractions of these samples were taken to evaluate the density of hydrocarbon utilizing bacteria (HUB) and the residual quantities of diesel or crude oil. The characteristics of the soil used show the need for supplementation for better degradation of hydrocarbons. The results of the study show that supplementing the soil with organic substrates increases HUB loads in soils contaminated by diesel and crude oil. They also show that the residual quantities of diesel and crude oil are generally significantly lower in supplemented soils (p = 0.048 and p < 0.0001 respectively). In addition, the study shows that degradation was generally greater in soils contaminated by diesel compared to those contaminated by crude oil, especially at the end of the study.

Prediction Model of Wax Deposition Rate in Waxy Crude Oil Pipelines by Elman Neural Network Based on Improved Reptile Search Algorithm

A hard problem that hinders the movement of waxy crude oil is wax deposition in oil pipelines.To ensure the safe operation of crude oil pipelines,an accurate model must be developed to predict the rate of wax deposition in crude oil pipelines.Aiming at the shortcomings of the ENN prediction model,which easily falls into the local minimum value and weak generalization ability in the implementation process,an optimized ENN prediction model based on the IRSA is proposed.The validity of the new model was confirmed by the accurate prediction of two sets of experimental data on wax deposition in crude oil pipelines.The two groups of crude oil wax deposition rate case prediction results showed that the average absolute percentage errors of IRSA-ENN prediction models is 0.5476% and 0.7831%,respectively.Additionally,it shows a higher prediction accuracy compared to the ENN prediction model.In fact,the new model established by using the IRSA to optimize ENN can optimize the initial weights and thresholds in the prediction process,which can overcome the shortcomings of the ENN prediction model,such as weak generalization ability and tendency to fall into the local minimum value,so that it has the advantages of strong implementation and high prediction accuracy.

Molecular composition of naphthenic acids in a Chinese heavy crude oil and their impacts on oil viscosity

Most heavy crude oils underwent biodegradation and generated a significant amount of naphthenic acids. Naphthenic acids are polar compounds with the carboxylic group and are considered as a major factor affecting the oil viscosity. However, the relationship between the molecular composition of naphthenic acids and oil viscosity is not well understood. This study examined a “clean” heavy oil with low contents of heteroatoms but had a high content of naphthenic acids. Naphthenic acids were fractionated by distillation and caustic extraction. The molecular composition was characterized by high-resolution Orbitrap mass spectrometry. It was found that the 2- and 3-ring naphthenic monoacids with 15–35 carbon atoms are dominant components of the acid fractions;the caustic extraction is capable of isolating naphthenic acids with less than 35 carbons, which is equivalent to the upper limit of the distillable components, but not those in the residue fraction;the total acid number of the heavy distillates is higher than that of the residue fraction;the viscosity of the distillation fraction increases exponentially with an increased boiling point of the distillates. Blending experiments indicates that there is a strong correlation between the oil viscosity and acids content, although the acid content is only a few percent of the total oil.

Pre-heating temperature induced flowability and wax deposition characteristics of crude oil adding wax inhibitors

This paper investigated the effects of pre-heating treatment temperatures(T_(pre))on the flowability and wax deposition characteristics of a typical waxy crude oil after adding wax inhibitors.It is found that there is little difference in wax precipitation exothermic characteristics of crude oils at different T_(pre),as well as the wax crystal solubility coefficient in the temperature range of 25-30℃.For the undoped crude oil,the flowability after wax precipitation gets much improved and the wax deposition is alleviated as T_(pre)increasing.At T_(pre)=50℃,the viscosity and wax deposition rate of crude oil adding wax inhibitors are higher than those of the undoped crude oil.When the T_(pre)increases to 60,70,and 80℃,the flowability of the doped crude oil are largely improved and the wax deposition is suppressed with the T_(pre)increase,but the wax content of wax deposit increases gradually.It is speculated that,on the one hand,the T_(pre)increase helps the dispersion of asphaltenes into smaller sizes,which facilitates the co-crystallization with paraffin waxes and generates more aggregated wax crystal flocs.This weakens the low-temperature gel structure and increases the solid concentration required for the crosslink to form the wax deposit.On the other hand,the decrease in viscosity increases the diffusion rate of wax molecules and accelerates the aging of wax deposits.The experimental results have important guiding significance for the pipeline transportation of doped crude oils.

Rheo-optic in situ synchronous study on the gelation behaviour and mechanism of waxy crude oil emulsions

An improved rheo-optic in situ synchronous measurement system was employed to investigate the gelation behaviour and mechanism of waxy crude oil emulsions. By combining transmitted natural light and reflected polarized light microscopy, a multiangle composite light source was built to achieve the simultaneous observation of wax crystals and emulsified water droplets, as well as their dynamic aggregation process. Main outcomes on the microscopic mechanism were obtained by developed microscopic image processing method. It was found that the microstructure of W/O waxy crude oil emulsion has the evolution of “individual structure--homogeneous aggregate structure--heterogeneous coaggregate structure--floc structure” during the static cooling, which results in the four stages during gelation process. Different from previous studies, the aggregation of emulsified water droplets was found to be more significant and contributes to the formation and development of the wax crystals-emulsified water droplets coaggregate, which plays a decisive role in the further evolution of the gelled microstructure. Time series microscopic images show the dynamic aggregation of emulsified water droplets and wax crystals. Two different aggregation behaviours between wax crystals and water droplets were observed. That wax crystals can not only embed in gaps between adjacent water droplets and enhance the structure, but also surround the outside of the water droplets and continue to grow resulting in the interconnection of different coaggregates to form a larger floc structure. In addition, correlation between viscoelasticity and microstructure evolution of waxy crude oil emulsions of different water contents was discussed. With increasing water contents, the microstructure is changed from wax crystal flocculation structure as the main skeleton and the emulsified water droplets embedded in it, into the aggregation of emulsified water droplets occupying the main position. When the number of wax crystals and water droplets reaches a certain ratio, did wax crystals form coaggregates with emulsified water droplets, and the remaining wax crystals formed an overall flocculation structure, the viscoelasticity of the waxy crude oil emulsion is the highest.

Investigation of Physical Properties of Nano Crude Petroleum: Increasing Oil Flow Rate in Reservoirs

The zinc oxide nano-particles have been used in this research. In this work, zinc oxide nanoparticles have been added to light and heavy crude oil. In this research, thermoelectric and physical properties of light and heavy crude petroleum have been measured, experimentally. In addition, dimensionless groups in hydrodynamics and heat transfer calculations are presented. This research illustrates that heat capacity of light and heavy crude petroleum varies from 4256 J/kg·°C to 4457 J/kg·°C and 4476 J/kg·°C to 5002 J/kg·°C, respectively. Moreover, heat capacity of light and heavy nano-crude petroleum is changing from about 4285 J/kg·°C to 4496 J/kg·°C and 4494 J/kg·°C to 5021 J/kg·°C, respectively.

Components of Paraffin-Base and Naphthenic-Base Crude Oil and Their Effects on Interfacial Performance

The saturate,aromatics,resin and asphaltene components of paraffin-base(PB)and naphthenic-base(HB)crude oil are separated by chromatographic column.The acidic components of crude oil are extracted by compounded polar solvents and identified by methyl esterification of diazomethane.The acidic components before and after asphaltene removal are investigated by gas chromatography-mass spectrometer.The effect of four fractions in simulated oil on interfacial activity is discussed.The results show PB is rich in naphthalene series and tri-aromatic steroids,and HB has a high content of phenanthrene series,chrysene series and methylpyrene,besides higher content of naphthalene series.The long carbon chain acids in HB oil decrease significantly by asphaltenes removal,confirming the presence of heavy oil acids in asphaltene.A little amount of saturates and aromatics in simulated oil can reduce the interfacial tension(IFT).When the content of asphaltenes of simulated oil is increased,IFT is initially decreased and finally increased because of stability of asphaltenes.When resin is increased,IFT is initially increased and then decreased.Simulated oil containing the resin from naphthenic-base oil is more sensitive to alkali than that of paraffin-base resin,which can reduce the IFT between oil and water at a larger range.

New Method for the Deep Dehydration and Desalination of Crude Oil

The present work focused on the environmentally friendly deep desalination of crude oil using ethylene glycol as the extraction solvent and quartz sand as the demulsifier.The effect of droplet size distribution in the emulsion on the dehydration results and desalination efficiency was investigated.Experimental results showed that the desalination efficiencies of Sarir and Basra crude oils were 93.3%and 90.0%,respectively.Furthermore,the desalination efficiency of Basra crude oil using ethylene glycol could be enhanced up to 96.7%by adding 30 g/L quartz sand with a particle size of 15μm.Finally,94%of the ethylene glycol and 86%of the quartz sand could be recovered from the emulsion.This process offers an alternative method to the deep desalination of crude oil.

Modeling and Study Influence of the Temperature Parameter on Corrosion Factors in the Atmospheric Distillation Column of Crude Oil

Atmospheric distillation is the first step in separating crude oil into by-products. It uses the different boiling temperatures of the components of crude oil to separate them. But crude oil contains a large quantity of acids and corrosive gases, including sulfur compounds, naphthenic acids, carbon dioxide, oxygen, etc. However, the temperature has an important influence on the aggressiveness of the corrosion factors in the atmospheric distillation column. This paper aims to investigate the role of temperature on corrosive products in the atmospheric distillation column. The results of the developed model show that the temperature increases the corrosion rate in the atmospheric distillation column but above a certain temperature value (about 600 K), it decreases. This illustrates the dual role played by temperature in the study of corrosion within the atmospheric distillation column.

Effect of nanocomposite pour point depressant EVAL/CNT on flow properties of waxy crude oil

The nanocomposite EVAL-CNT was produced by chemical grafting in the solution system through the esterification of ethylene-vinyl alcohol copolymer (EVAL) and carboxylated multi-walled carbon nanotubes (O-MWCNT), and its structural properties were characterized. The improvement of the rheological properties of the waxy oil system by the novel pour point depressant was investigated using macroscopic rheological measurements and microscopic observations. The results showed that EVAL-CNT nanocomposite pour point depressant (PPD) could significantly reduce the pour point and improve the low temperature fluidity of crude oil and had better performance than EVAL-GO at the same addition level. The best effect was achieved at the dosing concentration of 400 ppm, which reduced the pour point by 13 ℃ and the low-temperature viscosity by 85.4%. The nanocomposites dispersed in the oil phase influenced the precipitation and crystallization of wax molecules through heterogeneous crystallization templates, which led to the increase of wax crystal size and compact structure and changed the wax crystal morphology, which had a better effect on the rheological properties of waxy oil.

Laboratory Design Criteria for Monitoring Biostimulated Bioremediation of a Crude Oil Contaminated Soil in Niger Delta Using Total Petroleum Hydrocarbon

The remediation of crude oil-impacted soil has always been a challenge in different soil environments and climatic conditions. Bioremediation technology has offered a breakthrough in restoring crude oil-impacted soil/sediment in muddy, dry soil and wetlands. Though, there have been varied environmental conditions that have hampered the success of the bioremediation process. This study has evaluated the effectiveness of a biostimulated bioremediation of crude oil-impacted soil using some design criteria—nutrient amendment (NPK fertilizer) and moisture content. Soil sample sets—A, B, C, D, E, F, and G were impacted with crude oil at a ratio of 10 g/kg and amended with varying amounts of nutrient 30, 60, and 80 g of N.P.K fertilizer. The medium for the inoculation of the nutrient was water and the volume of water applied varied from 30% to 80% saturation. The soil sample sets were harvested at an interval of 3 months for 180 days to determine the concentration of total petroleum hydrocarbon left in the soil. The analysis of the total petroleum hydrocarbon was achieved using a GC-FID with a capillary column and autosampler. Soil samples were extracted with mixed solvent dichloromethane and acetone at a 1:1 ratio. The total petroleum hydrocarbon results show that biostimulated bioremediation achieved better results in soil sample sets with low moisture content (30% water saturation) and moderate nutrient amendment. The biodegradation of the sample sets with high water saturation and a high nutrient amendment was slow with a higher amount of total hydrocarbon content at the end of the 180 days. The variability in the hydrocarbon degradation pattern of contaminated soil shows that biostimulated bioremediation achieved better results in soils with low moisture content than in soil environments with high water content (saturation). More so, nutrient overdosing of the substrate hampered the effectiveness of the remediation process.

Enhancing Heavy Crude Oil Flow in Pipelines through Heating-Induced Viscosity Reduction in the Petroleum Industry

The process of transporting crude oil across pipelines is one of the most critical aspects of the midstream petroleum industry.In the present experimental work,the effect of temperature,pressure drop,and pipe diameter on the flow rate of heavy crude oil have been assessed.Moreover,the total discharge and energy losses have been evaluated in order to demonstrate the improvements potentially achievable by using solar heating method replacing pipe,and adjusting the value of the initial pressure difference.Crude oil of API=20 has been used for the experiments,with the studied pipelines sections connecting the separator unit to the storage tank operating at a temperature of 25℃-100℃,pressure drop of 3,4,5,and 6 kg/cm^(2),and with pipe diameter of 4,6,and 8 in.The results show that on increasing the temperature and/or the pressure drop,the flow rate through the pipeline becomes higher,thus raising the total pumping energy(as the pipe diameter increase),while energy losses increase from the last separator to the storage tank in the field.A pipe diameter increase can also produce a growth of the total pumping energy(i.e.,energy losses increase).The results of the present analysis suggest that employing an optimal temperature(50℃)is needed to ensure good performance.

A combined pig model to determine the net absorption of volatile fatty acids in the large intestine under different levels of crude fiber

Background:This study aimed to develop a combined model to quantify the net absorption of volatile fatty acids(VFA)in the large intestine(LI)of pigs.Methods:Fifteen female growing pigs(Duroc×Large White×Landrace)were ranked by body weight(30±2.1 kg)on day 0 and assigned to one of three treatments,namely the basal diet containing different crude fiber(CF)levels(LCF:3.0%CF,MCF:4.5%CF,and HCF:6.0%CF).The pigs were implanted with the terminal ileum fistula and the cannulation of the ileal mesenteric vein(IMV),portal vein(PV),and left femoral artery(LFA)from days 6 to 7.[13 C]-Labeled VFA and P-aminohippuric acid were constantly perfused into the terminal ileum fistula and the cannulation of the IMV(day 15),respectively.Blood samples were collected from the PV and the LFA during perfusion(5 h),and LI samples were collected.Results:The net flux of[12 C]-acetic acid in the PV was greater for LCF versus MCF(p=0.045),but no difference was observed in the net flux of[12 C]-propionic acid(p=0.505)and[12 C]-butyric acid(p=0.35)in the PV among treatments.The deposition of[12 C]-acetic acid in the LI was greater for LCF versus MCF(p=0.014),whereas the deposition of[12 C]-propionic acid(p=0.007)and[12 C]-butyric acid(p=0.037)in the LI was greater for LCF versus HCF.Conclusions:In conclusion,this pig model was found conducive to study the net absorption of VFAs in the LI,and LCF had more net absorption of VFAs in the LI than MCF and HCF.

Improving Crude Oil Flow Using Graphene Flakes under an Applied Electric Field

Graphene flakes(GF)have been prepared and assessed as a material for improving flow in oil pipelines under the effect of an electric field.In particular,different amounts of GFs have been considered in order to determine the optimal flow conditions.The GFs were prepared from graphite foam,derived from the dehydration of sugar with a particle size of 500-600μm,which was dispersed in ethanol and exfoliated in a ball mill under a shear force.After 15 h of exfoliation,sonication,and subsequent high-speed centrifugation at 3000 rpm,irregular-shaped GFs of 50-140 nm were produced and characterized using scanning electron microscopy,X-ray diffractometry,atomic force microscopy,and Raman spectroscopy.The prepared graphene sheets have been found to display excellent morphology and good graphitic structure.Experiments on flow improvement were conducted using the central composite rotatable design method for three parameters:stimulation time(15,30,45,and 60 s),applied voltage(150,170,200,and 220 V),and concentration of the GFs(0,100,200,and 400 mg/L).The optimal conditions for improved crude oil flow were then determined using the STATISTICA and WinQSB software packages.The results have confirmed the effectiveness of the use of the prepared GFs as a flow improver for crude oil,where the flow improvement is essentially a result of a reduction in viscosity and suppression of friction in the crude oil system.