Coupling analysis of transmission lines excited by space electromagnetic fields based on time domain hybrid method using parallel technique

We present a time domain hybrid method to realize the fast coupling analysis of transmission lines excited by space electromagnetic fields, in which parallel finite-difference time-domain (FDTD) method, interpolation scheme, and Agrawal model-based transmission line (TL) equations are organically integrated together. Specifically, the Agrawal model is employed to establish the TL equations to describe the coupling effects of space electromagnetic fields on transmission lines. Then, the excitation fields functioning as distribution sources in TL equations are calculated by the parallel FDTD method through using the message passing interface (MPI) library scheme and interpolation scheme. Finally, the TL equations are discretized by the central difference scheme of FDTD and assigned to multiple processors to obtain the transient responses on the terminal loads of these lines. The significant feature of the presented method is embodied in its parallel and synchronous calculations of the space electromagnetic fields and transient responses on the lines. Numerical simulations of ambient wave acting on multi-conductor transmission lines (MTLs), which are located on the PEC ground and in the shielded cavity respectively, are implemented to verify the accuracy and efficiency of the presented method.

Accurate Fault Location Modeling for Parallel Transmission Lines Considering Mutual Effect

:A new accurate algorithms based on mathematical modeling of two parallel transmissions lines system(TPTLS)as influenced by the mutual effect to determine the fault location is discussed in this work.The distance relay measures the impedance to the fault location which is the positive-sequence.The principle of summation the positive-,negative-,and zero-sequence voltages which equal zero is used to determine the fault location on the TPTLS.Also,the impedance of the transmission line to the fault location is determined.These algorithms are applied to single-line-to-ground(SLG)and double-line-to-ground(DLG)faults.To detect the fault location along the transmission line,its impedance as seen by the distance relay is determined to indicate if the fault is within the relay’s reach area.TPTLS under study are fed from one-and both-ends.A schematic diagrams are obtained for the impedance relays to determine the fault location with high accuracy.

OPTIMIZATION OF TRANSIENT FEEDING TO PARALLEL-PLATE TRANSMISSION LINES FROM COAXIAL LINE

The transient feeding to parallel-plate transmission lines from coaxial line is optimized by using the Finite-Difference Time-Domain (FDTD) method and a simple FDTD feed model. Observing the reflected voltages, this letter presents the optimal feeding position and ratio of width to height for a given input impedance of the coaxial line.

Dual Band BPF Based on Parallel Coupled Lines Loaded by Open Stubs for Ku-Band Satellite Applications

This paper presents a dual band Band Pass Filter (BPF) operating at both the downlink and uplink frequency bands for Ku-band satellite applications. The commonly used frequency band in mobile communications satellites is the Ku-band. These mobile satellite systems help connect remote regions, vehicles, ships, people and aircraft to other parts of the world and/or other mobile or stationary communications units, in addition to serving as navigation systems. The structure of the proposed filter is based on parallel coupled microstrip lines and four sections are used. Tuning the two operational bands can be achieved using two open-circuited stubs at the first and last sections of the parallel coupled microstrip lines. The proposed filter is adjusted to operate at 12.54 GHz and 14.14 GHz for downlink and uplink bands, respectively. The proposed dual band BPF is fabricated, measured, and good agreement is obtained between simulated and measured results.

Online One-End Fault Location Algorithm for Parallel Transmission Lines

Fault location and distance protection are essential smart grid technologies ensuring reliability of the power system. This paper describes an accurate algorithm for locating faults on double-circuit transmission lines. The proposed approach is capable of identifying the faulted circuit of a parallel transmission line by checking the estimated fault location and fault resistance. Voltage and current measurements from only one of the terminals of the faulty line are used. No pre-fault data are required for the estimation. The lumped parameter line model considering shunt capacitance is utilized for the derivation of the algorithm. It’s assumed that line parameters are known and transmission lines are fully transposed. The method is applicable to all types of faults. It’s evinced by evaluation studies that the proposed algorithm can correctly determine the faulted circuit in most cases. For exceptional cases, the current waveforms during the fault can be used to help identify the faulted circuit. The proposed algorithm generates quite accurate fault location estimates, and may be suitable for distance relaying.

Fault location for parallel transmission lines using one-terminal current traveling waves

With proper phase module transformation,parallel lines can be decomposed to the same directional net and the reverse directional net. The propagation characteristics of traveling waves in the reverse directional net were analyzed,and the refraction coefficient at the fault point for a single phase fault was derived. In addition,the module selection was discussed. Simulation results show that satisfying accuracy can be achieved with the proposed method. Moreover,it is immune to fault types,fault resistances,and outside system parameters.

One-End Data Method for Fault Position Estimate of Two-Parallel Transmission Lines

An accurate numerical algorithm for three-line fault involving different phases from each of two-parallel lines is presented. It is based on one-terminal voltage and current data. The loop and nodel equations comparing faulted phase to non-faulted phase of two-parallel lines are introduced in the fault location estimation modal, in which the faulted impedance of remote end is not involved. The effect of load flow and fault resistance on the accuracy of fault location are effectively eliminated, therefore an accurate algorithm of locating fault is derived. The algorithm is demonstrated by digital computer simulations and the results show that errors in locating fault are less than 1%.

Type Synthesis of 4-DOF Parallel Kinematic Mechanisms Based on Grassmann Line Geometry and Atlas Method

Many methods are proposed to deal with the type synthesis of parallel kinematic mechanisms（PKMs）, but most of them are less intuitive to some extent. Thus, to propose a concise and intuitive type synthesis method for engineering application is a very challenging issue, which should be further studied in the field. Grassmann line geometry, which can investigate the dimensions of spatial line-clusters in a concise way, is taken as the mathematic foundation. Atlas method is introduced to visually describe the degrees of freedom（DOFs） and constraints of a mechanism, and the dual rule is brought in to realize the mutual conversion of the freedom-space and constraint-space. Consequently, a systematic method based on Grassmann line geometry and Atlas method is generated and the entire type synthesis process is presented. Three type 4-DOF PKMs, i.e., 1T3R, 2T2R and 3T1R（T： translational DOF; R： rotational DOF）, are classified according to the different combinations of the translational DOFs and rotational DOFs. The type synthesis of 4-DOF PKMs is carried out and the possible configurations are thoroughly investigated. Some new PKMs with useful functions are generated during this procedure. The type synthesis method based on Grassmann line geometry and Atlas method is intuitive and concise, and can reduce the complexity of the PKMs＇ type synthesis. Moreover, this method can provide theoretical guidance for other PKMs＇ type synthesis and engineering application. A novel type synthesis method is proposed, which solves the existing methods＇ problems in terms of complicated, not intuitive and unsuitable for practical application.

Identifying Counterexamples Without Variability in Software Product Line Model Checking

Product detection based on state abstraction technologies in the software product line(SPL)is more complex when compared to a single system.This variability constitutes a new complexity,and the counterexample may be valid for some products but spurious for others.In this paper,we found that spurious products are primarily due to the failure states,which correspond to the spurious counterexamples.The violated products correspond to the real counterexamples.Hence,identifying counterexamples is a critical problem in detecting violated products.In our approach,we obtain the violated products through the genuine counterexamples,which have no failure state,to avoid the tedious computation of identifying spurious products dealt with by the existing algorithm.This can be executed in parallel to improve the efficiency further.Experimental results showthat our approach performswell,varying with the growth of the system scale.By analyzing counterexamples in the abstract model,we observed that spurious products occur in the failure state.The approach helps in identifying whether a counterexample is spurious or genuine.The approach also helps to check whether a failure state exists in the counterexample.The performance evaluation shows that the proposed approach helps significantly in improving the efficiency of abstraction-based SPL model checking.

Research on Total Electric Field for DC Lines Converted from Double-Circuit AC Lines

With rapid growth of power demand, transmission capacity is also in urgent need of upgrading. In some cases, converting existing AC transmission lines to DC lines can Improve the transmission capacity and reduce the construction investment. In this paper, the upstream finite element method was expanded to calculate the total electric field of same tower multi-circuit DC lines converted from double-circuit AC lines, and the validity of the algorithm was confirmed by experiments. Taking a DC line converted from a typical same tower 500 kV double-circuit AC transmission line as an example, the surface electric field and the ground total electric field in different pole conductor arrangement schemes were calculated and analyzed, and the critical height of pole conductors for DC lines in residential and non-residential area were determined. Then, the corridor width of DC and AC lines at critical height in residential and non-residential areas before and after AC-DC line transformation were compared. The results indicate that for DC lines converted from common 500 kV double-circuit AC lines, the ground total electric field can meet the requirements of corresponding standard with appropriate pole conductor arrangement schemes.

A fast and precise three-dimensional measurement system based on multiple parallel line lasers

This paper conducts a trade-off between efficiency and accuracy of three-dimensional(3 D)shape measurement based on the triangulation principle,and introduces a flying and precise 3 D shape measurement method based on multiple parallel line lasers.Firstly,we establish the measurement model of the multiple parallel line lasers system,and introduce the concept that multiple base planes can help to deduce the unified formula of the measurement system and are used in simplifying the process of the calibration.Then,the constraint of the line spatial frequency,which maximizes the measurement efficiency while ensuring accuracy,is determined according to the height distribution of the object.Secondly,the simulation analyzing the variation of the systemic resolution quantitatively under the circumstance of a set of specific parameters is performed,which provides a fundamental thesis for option of the four system parameters.Thirdly,for the application of the precision measurement in the industrial field,additional profiles are acquired to improve the lateral resolution by applying a motor to scan the 3 D surface.Finally,compared with the line laser,the experimental study shows that the present method of obtaining 41220 points per frame improves the measurement efficiency.Furthermore,the accuracy and the process of the calibration are advanced in comparison with the existing multiple-line laser and the structured light makes an accuracy better than 0.22 mm at a distance of 956.02 mm.

Study of Steady-state Performances for a Novel Line-start Single-phase Permanent Magnet Synchronous Motor With Three Parallel-connected Windings

对于三相感应电动机的单相运行,学者们已经提出了多种实用的接线方式,比如Smith接法、SEMIHEX接法。然而,对于三相异步起动永磁同步电动机的单相运行,很少有合适的接法提出。将并联式接法应用于三相异步起动永磁同步电动机的单相运行,提出了一种新型三绕组并联式异步起动单相永磁同步电动机。分析了三相异步起动永磁同步电动机同步运行时以及起动瞬间的正序、负序阻抗,基于对称分量法,对该接法电机的对称运行条件进行分析,得出了电容的确定方法,并利用遗传算法对电容值进行优化。提出了该新型电机稳态性能的计算方法;设计了一台高功率因数和一台低功率因数三相异步起动永磁同步电动机作为样机,并分别将其改接为三绕组高效单相永磁同步电动机,进行实验研究。实验结果表明,低功率因数的异步起动永磁同步电动机更适合改接成新型三绕组并联式单相永磁同步电动机。由低功率因数三相永磁同步电动机改接成的单相异步起动永磁同步电动机在额定负载下运行时,具有与同容量三相永磁同步电动机相近的效率和更高的功率因数。

Inter-Circuit Fault Location Algorithm for Two-Parallel Transmission Line

A novel numerical algorithm of fault location estimation for four-line fault without ground connection involving phases from each of the parallel lines is presented in this paper. It is based on one-terminal voltage and current data. The loop and nodal equations comparing faulted phase to non-faulted phase of two-parallel lines are introduced in the fault location estimation model, in which the source impedance of a remote end is not involved. The effects of load flow and fault resistance on the accuracy of fault location are effectively eliminated, therefore a precise algorithm of locating fault is derived. The algorithm is demonstrated by digital computer simulations.

Teaching method for reading views by analyzing lines and planes

This paper deals with the teaching method in reading engineering drawing. It introduces the basic theory and fundamental ideas as well as the approach of reading views by analyzing lines and planes. It gives out the steps for completing the third view based on the other two views. As it is easy and quick for students to read and understand views by this method, it is welcome by students in teaching practice.

“双线并行、五措并举”的高职学生党员培养路径创新研究

学生党员培养是高校党建工作的重要内容之一,党员培养质量关系着党和国家事业的发展。分析了高职学生党员培养的必要性及存在问题,提出了打造高职院校党务工作专业化队伍、创新“线上+线下”并行和“必修+选修”并重的党员培养方式、创新“精选+情感培养”的入党动机教育方法、建立“1+1+1”三段式党员长效培养机制和构建“4+15”党员考核评价体系“五措并举”的学生党员培养创新路径,旨在提升新媒体时代高职学生党员培养质量。

端接复杂电路传输线网络的电磁耦合时域并行计算方法

针对端接复杂电路传输线(TL)网络的电磁耦合问题,仍缺乏高效的场路协同仿真技术。该文将传输线方程与时域有限差分(FDTD)方法、诺顿定理和置换定理以及NGSPICE软件相结合,并引入消息传递接口(MPI)并行技术,提出一种高效的时域混合并行算法(FDTDTL-NGSPICE)。首先,根据诺顿定理和置换定理,将传输线网络分解为传输线子系统和复杂电路子系统,并构建对应的等效电路模型。然后,使用FDTDTL并行算法计算传输线子系统沿线各点的电压和电流,并获取对应诺顿等效电路的电流源和等效导纳大小。最后,使用NGSPICE对复杂电路子系统进行传导干扰分析,获得复杂电路各元件上的瞬态响应,并将端口电压反馈给传输线子系统作为边界,实现传输线网络电磁耦合的场线路联合协同仿真。通过对3类典型场景的计算实例,分别使用时域混合并行算法和电磁仿真软件CST电缆工作室(CS)进行数值模拟并对比,验证所提算法的置信度。

750kV单回并行输电线路电磁辐射环境研究

采用《环境影响评价技术导则输变电》(HJ 24—2020)附录C、D推荐的计算模式对750 kV单回并行输电线路电磁辐射环境进行计算与预测。结果表明,经过耕地、园地、牧草地、畜禽饲养地、道路等场所,当导线对地最小高度为15.5 m时,单回并行线路下的工频电场强度最大值超过10 kV/m;需将导线对地最小高度提至16.5 m,才能满足4 kV/m控制限值要求。750 kV单回并行输电线路产生的工频磁场强度小于公众曝露控制限值(100μT),一般情况下不会成为线路建设的环境制约因素;但其产生的工频电场是电磁环境影响的主要因素,电场强度控制限值(4 kV/m)是线路建设的环境制约因素,同时也是输变电电磁环境重点控制因素。现场实测结果与理论预测结果符合性较好,表明采用的预测模式具有较好的应用性,研究结果可为750 kV单回并行输电线路的建设和环境监管提供支持。

平面并联机器人离线PID控制优化研究

为了使平面并联机器人在闭环控制系统中具有更稳定的控制性能。对此,这里构建了平面五杆并联机器人动力学模型及其控制系统模型,给出了控制系统的增益矢量p。对机器人系统模型进行离线PID控制优化,通过控制增益来设计控制系统中的增益矢量p,从而实现非线性单目标动态优化(NLMODOP)。在NLMODOP中加入动态约束,采用带约束处理机制的差分进化(DE)算法求解平面并联机器人的非线性规划问题,进而处理不稳定的动态优化。对机器人模型中的五个连杆进行仿真实验,并对有无DE算法控制的仿真结果进行了比较。结果表明:相比于无DE算法,采用DE算法下的机器人系统模型的连杆跟踪位移基本无跟踪误差。说明基于差分进化算法的平面并联机器人离线PID控制优化具有较好的控制精度和跟踪性能。

基于PHAM-YOLO网络的卷烟纸燃烧线检测方法

为实现卷烟纸燃烧时燃烧线的准确识别,构建了常见应用场景下的卷烟纸燃烧线数据集。针对检测背景复杂、多目标、燃烧线尺度不一且形状各异的难题,将并行混合注意机制嵌入了YOLO v5主干网络,构建了PHAM-YOLO网络模型用于卷烟纸燃烧线的检测。采用特征金字塔快速池化、边界盒回归等方法提升了卷烟纸燃烧线的定位准确性。结果表明,对于卷烟纸燃烧线数据集,PHAM-YOLO网络检测平均精度均值、精度和召回率分别为99.0%、99.8%和99.0%,其中平均精度均值比原始模型提高了5.0%,高于其他类型的目标检测方法。

P|rj,on-line|∑C_j的一类在线算法与竞争比分析

本文研究平等机上的在线排序问题,优化目标是使总完工时间最小,算法SSPT是此问题的一类在线算法,论文引入一个拟时间表,此时间表具有SRPT时间表的部分性质,论文通过此辅助时间表证明了SSPT算法是(3-1/m)-competitive的。