High-voltage power supply (HVPS) of Electron Cyclotron Resonance Heating (ECRH) for HT-7 and HT-7U is presently being constructed. The high voltage (100 kV) energy of HVPS is stored in the capacitor banks, and they ca...High-voltage power supply (HVPS) of Electron Cyclotron Resonance Heating (ECRH) for HT-7 and HT-7U is presently being constructed. The high voltage (100 kV) energy of HVPS is stored in the capacitor banks, and they can power one or two gyrotrons. All the operation of the charging system will be done by the control system, where the field signals are interfaced to programmable logic controller (PLC). The use of PLC not only simplifies the control system, but also enhances the reliability. The software written by using configuration software installed in the master computer allows for remote and multiple operator control, and the status and data information is also remotely available.展开更多
Traditional transformer in high-voltage power supplies has many disadvantages such as high turn’s ratio, large volume and great design difficulties. Parallel resonant converters (PRCs) are widely used in high-voltage...Traditional transformer in high-voltage power supplies has many disadvantages such as high turn’s ratio, large volume and great design difficulties. Parallel resonant converters (PRCs) are widely used in high-voltage power supplies. A kind of high-voltage circuit topology can be formed by combining PRCs and voltage-doubler rectifier, which is called parallel resonant dual voltage converters (PRDVCs). In PRDVCs both voltage-doubler rectifier and transformer can boost voltage, which reduced turn’s ratio and volume of the transformer, making it easier to produce. Thus it not only realizes the high-voltage output, but also realizes the miniaturization of high-voltage power supply. Three modes of the converters were researched and simulated. Converting conditions of three modes were given. At last, PRDVCs was used to design a 5000V/50mA high-voltage power supply. The waveforms and results of the experiment were given, which validated the feasibility of the converters and its conversion efficiency might be improved to 93%.展开更多
The tundish induction heating power supply(TIHPS)is one of the most important equipment in the continuous casting process for metallurgical manufacturing.Specially,the constant temperature control is greatly significa...The tundish induction heating power supply(TIHPS)is one of the most important equipment in the continuous casting process for metallurgical manufacturing.Specially,the constant temperature control is greatly significant for metallurgical manufacturing.In terms of the relationship between TIH load temperature and output power of TIHPS,the constant temperature control can be realized by power control.In this paper,a TIHPS structure with three-phase PWM rectifiers and full-bridge cascaded inverter is proposed.Besides,an input harmonic current blocking strategy and a load voltage feedforward control are also proposed to realize constant temperature control.To meet the requirement of the system,controller parameters are designed properly.Experiments are con?ducted to validate the feasibility and effectiveness of the proposed TIHPS topology and the control methods.展开更多
基金The project supported by the National Meg-science Engineering Project of the Chinese Government
文摘High-voltage power supply (HVPS) of Electron Cyclotron Resonance Heating (ECRH) for HT-7 and HT-7U is presently being constructed. The high voltage (100 kV) energy of HVPS is stored in the capacitor banks, and they can power one or two gyrotrons. All the operation of the charging system will be done by the control system, where the field signals are interfaced to programmable logic controller (PLC). The use of PLC not only simplifies the control system, but also enhances the reliability. The software written by using configuration software installed in the master computer allows for remote and multiple operator control, and the status and data information is also remotely available.
文摘Traditional transformer in high-voltage power supplies has many disadvantages such as high turn’s ratio, large volume and great design difficulties. Parallel resonant converters (PRCs) are widely used in high-voltage power supplies. A kind of high-voltage circuit topology can be formed by combining PRCs and voltage-doubler rectifier, which is called parallel resonant dual voltage converters (PRDVCs). In PRDVCs both voltage-doubler rectifier and transformer can boost voltage, which reduced turn’s ratio and volume of the transformer, making it easier to produce. Thus it not only realizes the high-voltage output, but also realizes the miniaturization of high-voltage power supply. Three modes of the converters were researched and simulated. Converting conditions of three modes were given. At last, PRDVCs was used to design a 5000V/50mA high-voltage power supply. The waveforms and results of the experiment were given, which validated the feasibility of the converters and its conversion efficiency might be improved to 93%.
文摘The tundish induction heating power supply(TIHPS)is one of the most important equipment in the continuous casting process for metallurgical manufacturing.Specially,the constant temperature control is greatly significant for metallurgical manufacturing.In terms of the relationship between TIH load temperature and output power of TIHPS,the constant temperature control can be realized by power control.In this paper,a TIHPS structure with three-phase PWM rectifiers and full-bridge cascaded inverter is proposed.Besides,an input harmonic current blocking strategy and a load voltage feedforward control are also proposed to realize constant temperature control.To meet the requirement of the system,controller parameters are designed properly.Experiments are con?ducted to validate the feasibility and effectiveness of the proposed TIHPS topology and the control methods.
