The study on designs for the baseline parameterization has aroused attention in recent years. This paper focuses on two-level regular designs for the baseline parameterization. A general result on the relationship bet...The study on designs for the baseline parameterization has aroused attention in recent years. This paper focuses on two-level regular designs for the baseline parameterization. A general result on the relationship between K-aberration and word length pattern is developed.展开更多
K shell fluorescence parameters of pure Ti and some of its compounds have been determined experimentally using an Ultra-LEGe detector with resolution 150 eV at 5.9keV.The samples were excited 5.96 keV photons emitted ...K shell fluorescence parameters of pure Ti and some of its compounds have been determined experimentally using an Ultra-LEGe detector with resolution 150 eV at 5.9keV.The samples were excited 5.96 keV photons emitted from a ^(55) Fe radioisotope source with 50 mCi activity.The experimental values of the K shell fluorescence parameters have been compared with the experimental and theoretical values available in the literature for pure Ti.展开更多
Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the ...Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.展开更多
本文针对多频窄带未知和时变扰动,基于内模原理和Y-K参数化方法,提出一种反馈鲁棒自适应振动的主动控制算法。该算法通过设计PID中央鲁棒控制器,有效解决了次级通道模型未知情况下的鲁棒控制器参数设计问题。同时提出一种变步长最小均方...本文针对多频窄带未知和时变扰动,基于内模原理和Y-K参数化方法,提出一种反馈鲁棒自适应振动的主动控制算法。该算法通过设计PID中央鲁棒控制器,有效解决了次级通道模型未知情况下的鲁棒控制器参数设计问题。同时提出一种变步长最小均方(Variable Step Size Least Mean Square,VSSLMS)方法,可以在保证稳态误差的基础上大幅提升收敛速度,并通过系统辨识实验验证了所提VSSLMS方法相较于其他VSSLMS算法在收敛性能上的优越性。通过结构微振动主动控制实时实验,对比验证了单独采用滤波x最小均方(Least Mean Square,LMS)自适应控制算法、基于LMS算法的鲁棒自适应控制算法和基于VSSLMS算法的鲁棒自适应控制算法的抑振效果。实验结果表明,本文基于VSSLMS算法的鲁棒自适应控制算法在面向双频正弦窄带扰动以及其频谱、幅值突变情况时,都具有较好的收敛性和鲁棒性。展开更多
基于HYCOM设计了3组数值试验,分别采用KPP(K-Profile Parameterization),KT(Kraus and Turner),MY(Mellor and Yamada)2.5三种垂向混合方案,比较分析了这3种混合方案对全球大洋的模拟能力。结果表明:KPP方案和MY2.5方案模拟的温度场十...基于HYCOM设计了3组数值试验,分别采用KPP(K-Profile Parameterization),KT(Kraus and Turner),MY(Mellor and Yamada)2.5三种垂向混合方案,比较分析了这3种混合方案对全球大洋的模拟能力。结果表明:KPP方案和MY2.5方案模拟的温度场十分类似,在中高纬度几乎一致,在赤道断面上MY2.5方案的最大误差小于KPP方案,对于暖池区SST的模拟MY2.5方案的误差也稍小于KPP方案,但二者的差别并不明显。在模拟赤道潜流时,MY2.5方案暴露出明显不足,其模拟效果要明显差于KPP方案和KT方案。KT方案模拟效果的好坏依赖于混合层底的确定是否准确,其在中高纬度海域的模拟效果要明显优于热带海域。总之,在热带海域,KPP方案的模拟整体效果最好,在中高纬度海域,KPP方案和MY2.5方案差别不大,而KT方案则更适用于中高纬度。展开更多
Efficient parameterization of point-sampled surfaces is a fundamental problem in the field of digital geometry processing. In order to parameterize a given point-sampled surface for minimal distance distortion, a diff...Efficient parameterization of point-sampled surfaces is a fundamental problem in the field of digital geometry processing. In order to parameterize a given point-sampled surface for minimal distance distortion, a differentialslbased segmentation and parameterization approach is proposed in this paper. Our approach partitions the point-sampled geometry based on two criteria： variation of Euclidean distance between sample points, and angular difference between surface differential directions. According to the analysis of normal curvatures for some specified directions, a new projection approach is adopted to estimate the local surface differentials. Then a k-means clustering （k-MC） algorithm is used for partitioning the model into a set of charts based on the estimated local surface attributes. Finally, each chart is parameterized with a statistical method -- multidimensional scaling （MDS） approach, and the parameterization results of all charts form an atlas for compact storage.展开更多
文摘The study on designs for the baseline parameterization has aroused attention in recent years. This paper focuses on two-level regular designs for the baseline parameterization. A general result on the relationship between K-aberration and word length pattern is developed.
文摘K shell fluorescence parameters of pure Ti and some of its compounds have been determined experimentally using an Ultra-LEGe detector with resolution 150 eV at 5.9keV.The samples were excited 5.96 keV photons emitted from a ^(55) Fe radioisotope source with 50 mCi activity.The experimental values of the K shell fluorescence parameters have been compared with the experimental and theoretical values available in the literature for pure Ti.
基金This project was sponsored by the State Seismological Bureau (85070102), China
文摘Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.
文摘本文针对多频窄带未知和时变扰动,基于内模原理和Y-K参数化方法,提出一种反馈鲁棒自适应振动的主动控制算法。该算法通过设计PID中央鲁棒控制器,有效解决了次级通道模型未知情况下的鲁棒控制器参数设计问题。同时提出一种变步长最小均方(Variable Step Size Least Mean Square,VSSLMS)方法,可以在保证稳态误差的基础上大幅提升收敛速度,并通过系统辨识实验验证了所提VSSLMS方法相较于其他VSSLMS算法在收敛性能上的优越性。通过结构微振动主动控制实时实验,对比验证了单独采用滤波x最小均方(Least Mean Square,LMS)自适应控制算法、基于LMS算法的鲁棒自适应控制算法和基于VSSLMS算法的鲁棒自适应控制算法的抑振效果。实验结果表明,本文基于VSSLMS算法的鲁棒自适应控制算法在面向双频正弦窄带扰动以及其频谱、幅值突变情况时,都具有较好的收敛性和鲁棒性。
文摘基于HYCOM设计了3组数值试验,分别采用KPP(K-Profile Parameterization),KT(Kraus and Turner),MY(Mellor and Yamada)2.5三种垂向混合方案,比较分析了这3种混合方案对全球大洋的模拟能力。结果表明:KPP方案和MY2.5方案模拟的温度场十分类似,在中高纬度几乎一致,在赤道断面上MY2.5方案的最大误差小于KPP方案,对于暖池区SST的模拟MY2.5方案的误差也稍小于KPP方案,但二者的差别并不明显。在模拟赤道潜流时,MY2.5方案暴露出明显不足,其模拟效果要明显差于KPP方案和KT方案。KT方案模拟效果的好坏依赖于混合层底的确定是否准确,其在中高纬度海域的模拟效果要明显优于热带海域。总之,在热带海域,KPP方案的模拟整体效果最好,在中高纬度海域,KPP方案和MY2.5方案差别不大,而KT方案则更适用于中高纬度。
基金This work is supported by the National Grand Fundamental Research 973 Program of China under Grant No.2002CB312101National Natural Science Foundation of China(NSFC)under Grant Nos. 60503056,60333010the Natural Science Foundation of Zhejiang Province under Grant No.R106449.
文摘Efficient parameterization of point-sampled surfaces is a fundamental problem in the field of digital geometry processing. In order to parameterize a given point-sampled surface for minimal distance distortion, a differentialslbased segmentation and parameterization approach is proposed in this paper. Our approach partitions the point-sampled geometry based on two criteria： variation of Euclidean distance between sample points, and angular difference between surface differential directions. According to the analysis of normal curvatures for some specified directions, a new projection approach is adopted to estimate the local surface differentials. Then a k-means clustering （k-MC） algorithm is used for partitioning the model into a set of charts based on the estimated local surface attributes. Finally, each chart is parameterized with a statistical method -- multidimensional scaling （MDS） approach, and the parameterization results of all charts form an atlas for compact storage.
