Utility and Application of a Versatile Analytical Method for MMF Calculation in AC Machines

A versatile analytical method(VAM) for calculating the harmonic components of the magnetomotive force(MMF) generated by diverse armature windings in AC machines has been proposed, and the versatility of this method has been established in early literature. However, its practical applications and significance in advancing the analysis of AC machines need further elaboration. This paper aims to complement VAM by augmenting its theory, offering additional insights into its conclusions, as well as demonstrating its utility in assessing armature windings and its application of calculating torque for permanent magnet synchronous machines(PMSM). This work contributes to advancing the analysis of AC machines and underscores the potential for improved design and performance optimization.

Interpretable machine learning optimization(InterOpt)for operational parameters:A case study of highly-efficient shale gas development

An algorithm named InterOpt for optimizing operational parameters is proposed based on interpretable machine learning,and is demonstrated via optimization of shale gas development.InterOpt consists of three parts:a neural network is used to construct an emulator of the actual drilling and hydraulic fracturing process in the vector space(i.e.,virtual environment);:the Sharpley value method in inter-pretable machine learning is applied to analyzing the impact of geological and operational parameters in each well(i.e.,single well feature impact analysis):and ensemble randomized maximum likelihood(EnRML)is conducted to optimize the operational parameters to comprehensively improve the efficiency of shale gas development and reduce the average cost.In the experiment,InterOpt provides different drilling and fracturing plans for each well according to its specific geological conditions,and finally achieves an average cost reduction of 9.7%for a case study with 104 wells.

Runoff Modeling in Ungauged Catchments Using Machine Learning Algorithm-Based Model Parameters Regionalization Methodology

Model parameters estimation is a pivotal issue for runoff modeling in ungauged catchments.The nonlinear relationship between model parameters and catchment descriptors is a major obstacle for parameter regionalization,which is the most widely used approach.Runoff modeling was studied in 38 catchments located in the Yellow–Huai–Hai River Basin(YHHRB).The values of the Nash–Sutcliffe efficiency coefficient(NSE),coefficient of determination(R2),and percent bias(PBIAS)indicated the acceptable performance of the soil and water assessment tool(SWAT)model in the YHHRB.Nine descriptors belonging to the categories of climate,soil,vegetation,and topography were used to express the catchment characteristics related to the hydrological processes.The quantitative relationships between the parameters of the SWAT model and the catchment descriptors were analyzed by six regression-based models,including linear regression(LR)equations,support vector regression(SVR),random forest(RF),k-nearest neighbor(kNN),decision tree(DT),and radial basis function(RBF).Each of the 38 catchments was assumed to be an ungauged catchment in turn.Then,the parameters in each target catchment were estimated by the constructed regression models based on the remaining 37 donor catchments.Furthermore,the similaritybased regionalization scheme was used for comparison with the regression-based approach.The results indicated that the runoff with the highest accuracy was modeled by the SVR-based scheme in ungauged catchments.Compared with the traditional LR-based approach,the accuracy of the runoff modeling in ungauged catchments was improved by the machine learning algorithms because of the outstanding capability to deal with nonlinear relationships.The performances of different approaches were similar in humid regions,while the advantages of the machine learning techniques were more evident in arid regions.When the study area contained nested catchments,the best result was calculated with the similarity-based parameter regionalization scheme because of the high catchment density and short spatial distance.The new findings could improve flood forecasting and water resources planning in regions that lack observed data.

Optimization of CNC Turning Machining Parameters Based on Bp-DWMOPSO Algorithm

Cutting parameters have a significant impact on the machining effect.In order to reduce the machining time and improve the machining quality,this paper proposes an optimization algorithm based on Bp neural networkImproved Multi-Objective Particle Swarm(Bp-DWMOPSO).Firstly,this paper analyzes the existing problems in the traditional multi-objective particle swarm algorithm.Secondly,the Bp neural network model and the dynamic weight multi-objective particle swarm algorithm model are established.Finally,the Bp-DWMOPSO algorithm is designed based on the established models.In order to verify the effectiveness of the algorithm,this paper obtains the required data through equal probability orthogonal experiments on a typical Computer Numerical Control(CNC)turning machining case and uses the Bp-DWMOPSO algorithm for optimization.The experimental results show that the Cutting speed is 69.4 mm/min,the Feed speed is 0.05 mm/r,and the Depth of cut is 0.5 mm.The results show that the Bp-DWMOPSO algorithm can find the cutting parameters with a higher material removal rate and lower spindle load while ensuring the machining quality.This method provides a new idea for the optimization of turning machining parameters.

Determining the Optimal Parameters of an Advanced Linter Machine

In this article, research was conducted to improve Linter machines that remove short fibers remaining in ginned cotton seeds at cotton ginneries. The study examined the effect of changing the dimensions of the brush drum, guide and mesh surface in the cleaning device proposed for the linting machine on the movement of the peg and the cleaning efficiency, and the highest level of efficiency in separating impurities from the peg was determined. During the study, the main factors influencing the effective operation of the improved linting machine were identified, the limits of their values were determined, and studies were carried out using the mathematical modeling method. As a result, at the values of the given coefficients, efficient operation of the improved linting machine was observed, that is, the lint cleaning efficiency reached 55.1%.

Machine tool selection based on fuzzy evaluation and optimization of cutting parameters

The paper analyzes the factors influencing machine tool selection. By using fuzzy mathematics theory, we establish a theorietical model for optimal machine tool selection considering geometric features, clamping size, machining range, machining precision and surface roughness. By means of fuzzy comprehensive evaluation method, the membership degree of machine tool selection and the largest comprehensive evaluation index are determined. Then the reasonably automatic selection of machine tool is realized in the generative computer aided process planning （CAPP） system. Finally, the finite element model based on ABAQUS is established and the cutting process of machine tool is simulated. According to the theoretical and empirical cutting parameters and the curve of surface residual stress, the optimal cutting parameters can be determined.

Automated Machine Learning Enabled Cybersecurity Threat Detection in Internet of Things Environment

Recently,Internet of Things(IoT)devices produces massive quantity of data from distinct sources that get transmitted over public networks.Cybersecurity becomes a challenging issue in the IoT environment where the existence of cyber threats needs to be resolved.The development of automated tools for cyber threat detection and classification using machine learning(ML)and artificial intelligence(AI)tools become essential to accomplish security in the IoT environment.It is needed to minimize security issues related to IoT gadgets effectively.Therefore,this article introduces a new Mayfly optimization(MFO)with regularized extreme learning machine(RELM)model,named MFO-RELM for Cybersecurity Threat Detection and classification in IoT environment.The presented MFORELM technique accomplishes the effectual identification of cybersecurity threats that exist in the IoT environment.For accomplishing this,the MFO-RELM model pre-processes the actual IoT data into a meaningful format.In addition,the RELM model receives the pre-processed data and carries out the classification process.In order to boost the performance of the RELM model,the MFO algorithm has been employed to it.The performance validation of the MFO-RELM model is tested using standard datasets and the results highlighted the better outcomes of the MFO-RELM model under distinct aspects.

Parameters selection in gene selection using Gaussian kernel support vector machines by genetic algorithm

In microarray-based cancer classification, gene selection is an important issue owing to the large number of variables and small number of samples as well as its non-linearity. It is difficult to get satisfying results by using conventional linear sta- tistical methods. Recursive feature elimination based on support vector machine (SVM RFE) is an effective algorithm for gene selection and cancer classification, which are integrated into a consistent framework. In this paper, we propose a new method to select parameters of the aforementioned algorithm implemented with Gaussian kernel SVMs as better alternatives to the common practice of selecting the apparently best parameters by using a genetic algorithm to search for a couple of optimal parameter. Fast implementation issues for this method are also discussed for pragmatic reasons. The proposed method was tested on two repre- sentative hereditary breast cancer and acute leukaemia datasets. The experimental results indicate that the proposed method per- forms well in selecting genes and achieves high classification accuracies with these genes.

Parameters Optimization of a Novel 5-DOF Gasbag Polishing Machine Tool

The research on the parameters optimization for gasbag polishing machine tools, mainly aims at a better kinematics performance and a design scheme. Serial structural arm is mostly employed in gasbag polishing machine tools at present, but it is disadvantaged by its complexity, big inertia, and so on. In the multi-objective parameters optimization, it is very difficult to select good parameters to achieve excellent performance of the mechanism. In this paper, a statistics parameters optimization method based on index atlases is presented for a novel 5-DOF gasbag polishing machine tool. In the position analyses, the structure and workspace for a novel 5-DOF gasbag polishing machine tool is developed, where the gasbag polishing machine tool is advantaged by its simple structure, lower inertia and bigger workspace. In the kinematics analyses, several kinematics performance evaluation indices of the machine tool are proposed and discussed, and the global kinematics performance evaluation atlases are given. In the parameters optimization process, considering the assembly technique, a design scheme of the 5-DOF gasbag polishing machine tool is given to own better kinematics performance based on the proposed statistics parameters optimization method, and the global linear isotropic performance index is 0.5, the global rotational isotropic performance index is 0.5, the global linear velocity transmission performance index is 1.012 3 m/s in the case of unit input matrix, the global rotational velocity transmission performance index is 0.102 7 rad/s in the case of unit input matrix, and the workspace volume is 1. The proposed research provides the basis for applications of the novel 5-DOF gasbag polishing machine tool, which can be applied to the modern industrial fields requiring machines with lower inertia, better kinematics transmission performance and better technological efficiency.

Experimental Research on Effects of Process Parameters on Servo Scanning 3D Micro Electrical Discharge Machining

Servo scanning 3D micro electrical discharge machining (3D SSMEDM) is a novel and effective method in fabricating complex 3D micro structures with high aspect ratio on conducting materials. In 3D SSMEDM process, the axial wear of tool electrode can be compensated automatically by servo-keeping discharge gap, instead of the traditional methods that depend on experiential models or intermittent compensation. However, the effects of process parameters on 3D SSMEDM have not been reported up until now. In this study, the emphasis is laid on the effects of pulse duration, peak current, machining polarity, track style, track overlap, and scanning velocity on the 3D SSMEDM performances of machining efficiency, processing status, and surface accuracy. A series of experiments were carried out by machining a micro-rectangle cavity (900 μm×600 μm) on doped silicon. The experimental results were obtained as follows. Peak current plays a main role in machining efficiency and surface accuracy. Pulse duration affects obviously the stability of discharge state. The material removal rate of cathode processing is about 3/5 of that of anode processing. Compared with direction-parallel path, contour-parallel path is better in counteracting the lateral wear of tool electrode end. Scanning velocity should be selected moderately to avoid electric arc and short. Track overlap should be slightly less than the radius of tool electrode. In addition, a typical 3D micro structure of eye shape was machined based on the optimized process parameters. These results are beneficial to improve machining stability, accuracy, and efficiency in 3D SSMEDM.

Vote-Based Feature Selection Method for Stratigraphic Recognition in Tunnelling Process of Shield Machine

Shield machines are currently the main tool for underground tunnel construction. Due to the complexity and variability of the underground construction environment, it is necessary to accurately identify the ground in real-time during the tunnel construction process to match and adjust the tunnel parameters according to the geological conditions to ensure construction safety. Compared with the traditional method of stratum identifcation based on staged drilling sampling, the real-time stratum identifcation method based on construction data has the advantages of low cost and high precision. Due to the huge amount of sensor data of the ultra-large diameter mud-water balance shield machine, in order to balance the identifcation time and recognition accuracy of the formation, it is necessary to screen the multivariate data features collected by hundreds of sensors. In response to this problem, this paper proposes a voting-based feature extraction method (VFS), which integrates multiple feature extraction algorithms FSM, and the frequency of each feature in all feature extraction algorithms is the basis for voting. At the same time, in order to verify the wide applicability of the method, several commonly used classifcation models are used to train and test the obtained efective feature data, and the model accuracy and recognition time are used as evaluation indicators, and the classifcation with the best combination with VFS is obtained. The experimental results of shield machine data of 6 diferent geological structures show that the average accuracy of 13 features obtained by VFS combined with diferent classifcation algorithms is 91%;among them, the random forest model takes less time and has the highest recognition accuracy, reaching 93%, showing best compatibility with VFS. Therefore, the VFS algorithm proposed in this paper has high reliability and wide applicability for stratum identifcation in the process of tunnel construction, and can be matched with a variety of classifer algorithms. By combining 13 features selected from shield machine data features with random forest, the identifcation of the construction stratum environment of shield tunnels can be well realized, and further theoretical guidance for underground engineering construction can be provided.

Effective Return Rate Prediction of Blockchain Financial Products Using Machine Learning

In recent times,financial globalization has drastically increased in different ways to improve the quality of services with advanced resources.The successful applications of bitcoin Blockchain(BC)techniques enable the stockholders to worry about the return and risk of financial products.The stockholders focused on the prediction of return rate and risk rate of financial products.Therefore,an automatic return rate bitcoin prediction model becomes essential for BC financial products.The newly designed machine learning(ML)and deep learning(DL)approaches pave the way for return rate predictive method.This study introduces a novel Jellyfish search optimization based extreme learning machine with autoencoder(JSO-ELMAE)for return rate prediction of BC financial products.The presented JSO-ELMAE model designs a new ELMAE model for predicting the return rate of financial products.Besides,the JSO algorithm is exploited to tune the parameters related to the ELMAE model which in turn boosts the classification results.The application of JSO technique assists in optimal parameter adjustment of the ELMAE model to predict the bitcoin return rates.The experimental validation of the JSO-ELMAE model was executed and the outcomes are inspected in many aspects.The experimental values demonstrated the enhanced performance of the JSO-ELMAE model over recent state of art approaches with minimal RMSE of 0.1562.

STUDY ON NEW METHOD OF IDENTIFYING GEOMETRIC ERROR PARAMETERS FOR NC MACHINE TOOLS

The methods of identifying geometric error parameters for NC machine tools are introduced. According to analyzing and comparing the different methods, a new method-displacement method with 9 lines is developed based on the theories of the movement errors of multibody system (MBS). A lot of experiments are also made to obtain 21 terms geometric error parameters by using the error identification software based on the new method.

AID4I:An Intrusion Detection Framework for Industrial Internet of Things Using Automated Machine Learning

By identifying and responding to any malicious behavior that could endanger the system,the Intrusion Detection System(IDS)is crucial for preserving the security of the Industrial Internet of Things(IIoT)network.The benefit of anomaly-based IDS is that they are able to recognize zeroday attacks due to the fact that they do not rely on a signature database to identify abnormal activity.In order to improve control over datasets and the process,this study proposes using an automated machine learning(AutoML)technique to automate the machine learning processes for IDS.Our groundbreaking architecture,known as AID4I,makes use of automatic machine learning methods for intrusion detection.Through automation of preprocessing,feature selection,model selection,and hyperparameter tuning,the objective is to identify an appropriate machine learning model for intrusion detection.Experimental studies demonstrate that the AID4I framework successfully proposes a suitablemodel.The integrity,security,and confidentiality of data transmitted across the IIoT network can be ensured by automating machine learning processes in the IDS to enhance its capacity to identify and stop threatening activities.With a comprehensive solution that takes advantage of the latest advances in automated machine learning methods to improve network security,AID4I is a powerful and effective instrument for intrusion detection.In preprocessing module,three distinct imputation methods are utilized to handle missing data,ensuring the robustness of the intrusion detection system in the presence of incomplete information.Feature selection module adopts a hybrid approach that combines Shapley values and genetic algorithm.The Parameter Optimization module encompasses a diverse set of 14 classification methods,allowing for thorough exploration and optimization of the parameters associated with each algorithm.By carefully tuning these parameters,the framework enhances its adaptability and accuracy in identifying potential intrusions.Experimental results demonstrate that the AID4I framework can achieve high levels of accuracy in detecting network intrusions up to 14.39%on public datasets,outperforming traditional intrusion detection methods while concurrently reducing the elapsed time for training and testing.

Experimental study on temperature stress calculation and temperature control optimization of concrete based on early age parameters

Temperature control curve is the key to achieving temperature control and crack prevention of high concrete dam during construction,and its rationality depends on the accurate measurement of temperature stress.With the simulation testing machine for the temperature stress,in the present study,we carried out the deformation process tests of concrete under three temperature curves:convex,straight and concave.Besides,we not only measured the early-age elastic modulus,creep parameters and stress process,but also proposed the preferred type.The results show that at early age,higher temperature always leads to greater elastic modulus and smaller creep.However,the traditional indoor experiments have underestimated the elastic modulus and creep development at early age,which makes the calculated value of temperature stress too small,thus increasing the cracking risk.In this study,the stress values of the three curves calculated based on the strain and early-age parameters are in good agreement with the temperature stress measured by the temperature stress testing machine,which verifies the method accuracy.When the temperature changes along the concave curve,the law of stress development is in consistent with that of strength.Under this condition,the stress fluctuation is small and the crack prevention safety of the concave type is higher,so the concave type is better.The test results provide a reliable basis and support for temperature control curve design and optimization of concrete dams.

Torque Characteristics of High Torque Density Partitioned PM Consequent Pole Flux Switching Machines With Flux Barriers

Unique double salient structure of Permanent Magnet Flux Switching Machines(PMFSM)with both Concentrated Armature inding(CAW)and Permanent Magnet(PM)on stator attract researcher's interest for high speed brushless application when high torque density(T den)and power density(P den)are the primal requirements.However,despite of stator leakage flux,high rare-earth PM usage,PMFSM is subjected to slot effects due to presence of both PM and CAW in stator and partial saturation due to double salient structure which generates cogging torque(T cog),torque ripples(Trip)and lower average torque(T avg).To overcomne aforesaid demerits,this paper presents Partitioned PM(PPM)Consequent Pole Flux Switching Machine(PPM-CPFSM)with flux barriers to enhance flux mnodulation,curtail PM usage and diminish stator leakage flux which reduces slotting effects and partial saturation to ultimately reduces T cog and Trip In comparison with the existing state of the art,proposed PPM-CPFSM reduces 46.5390 of the total PM volumne and offer Tavg higher up to 88.8%,suppress Trip naximun up to 24.8%,diminish Tcog up to 22.74%and offer 2.45 times Tden and Pden.Furthermore,torque characteristics of proposed PPM-CPFSM is investigated utilizing space harmonics injection i.e.inverse cosine,inverse cosine with 3rd harmonics and rotor pole shaping techniques i.e.,ecce ntric circle,chanfering and notching.Detailed electromagnetic perfornance analysis reveals that harmonics injection suppressed Tcog maximun up to 83.5%,Trip up to 40.72%at the cost of 4.71%Tavg.Finally,rotor mnechanical stress analysis is utilized for rotor withstand capability and 3D-FEA based Coupled Elctromagnetic Thermal Analysis(CETA)for thermal behavior of the developed PPM CPFSM.CETA reveals that open space along PPM act as cooling duct that inprove heat dissipation.

Soft ground tunnel lithology classification using clustering-guided light gradient boosting machine

During tunnel boring machine(TBM)excavation,lithology identification is an important issue to understand tunnelling performance and avoid time-consuming excavation.However,site investigation generally lacks ground samples and the information is subjective,heterogeneous,and imbalanced due to mixed ground conditions.In this study,an unsupervised(K-means)and synthetic minority oversampling technique(SMOTE)-guided light-gradient boosting machine(LightGBM)classifier is proposed to identify the soft ground tunnel classification and determine the imbalanced issue of tunnelling data.During the tunnel excavation,an earth pressure balance(EPB)TBM recorded 18 different operational parameters along with the three main tunnel lithologies.The proposed model is applied using Python low-code PyCaret library.Next,four decision tree-based classifiers were obtained in a short time period with automatic hyperparameter tuning to determine the best model for clustering-guided SMOTE application.In addition,the Shapley additive explanation(SHAP)was implemented to avoid the model black box problem.The proposed model was evaluated using different metrics such as accuracy,F1 score,precision,recall,and receiver operating characteristics(ROC)curve to obtain a reasonable outcome for the minority class.It shows that the proposed model can provide significant tunnel lithology identification based on the operational parameters of EPB-TBM.The proposed method can be applied to heterogeneous tunnel formations with several TBM operational parameters to describe the tunnel lithologies for efficient tunnelling.

基于Stacking集成学习的机械钻速预测方法

机械钻速是评估石油天然气钻井作业效率的重要指标。为准确预测新疆工区某油田钻井机械钻速,基于该工区的历史钻井数据,利用局部离群因子检测算法对数据进行预处理,建立了基于Stacking集成学习的机械钻速预测模型,该模型通过Stacking集成策略融合K近邻算法(KNN)、支持向量机算法(SVM)和随机森林算法(RF)进行预测验证。预测验证结果显示,分类准确度不高。运用遗传算法进行各基础模型参数优化。优化后,基于KNN、SVM、RF及Stacking集成4种算法,预测机械钻速准确率分别为73.7%、78.9%、81.6%及97.4%,其中Stacking集成模型预测准确率最高。基于Stacking集成学习的机械钻速预测方法开发了机械钻速预测软件,运用软件预测其他2套施工参数下的机械钻速,结果表明,预测机械钻速与实际机械钻速一致,且性能稳定,表明该模型拥有较强的泛化性和较高的预测精度。该智能算法可为新疆工区的该油田机械钻速预测与钻井施工参数优化提供一种新手段。

Assessment of groundwater quantity, quality, and associated health risk of the Tano river basin, Ghana

In the Tano River Basin,groundwater serves as a crucial resource;however,its quantity and quality with regard to trace elements and microbiological loadings remain poorly understood due to the lack of groundwater logs and limited water research.This study presents a comprehensive analysis of the Tano River Basin,focusing on three key objectives.First,it investigated the aquifer hydraulic parameters and the results showed significant spatial variations in borehole depths,yields,transmissivity,hydraulic conductivity,and specific capacity.Deeper boreholes were concentrated in the northeastern and southeastern zones,while geological formations,particu-larly the Apollonian Formation,exhibit a strong influence on borehole yields.The study identified areas with high transmissivity and hydraulic conductivity in the southern and eastern regions,suggesting good groundwater avail-ability and suitability for sustainable water supply.Sec-ondly,the research investigated the groundwater quality and observed that the majority of borehole samples fall within WHO(Guidelines for Drinking-water Quality,Environmental Health Criteria,Geneva,2011,2017.http://www.who.int)limit.However,some samples have pH levels below the standards,although the groundwater generally qualifies as freshwater.The study further explores hydrochemical facies and health risk assessment,highlighting the dominance of Ca–HCO3 water type.Trace element analysis reveals minimal health risks from most elements,with chromium(Cr)as the primary contributor to chronic health risk.Overall,this study has provided a key insights into the Tano River Basin’s hydrogeology and associated health risks.The outcome of this research has contributed to the broader understanding of hydrogeologi-cal dynamics and the importance of managing groundwater resources sustainably in complex geological environments.

Application of Full-Order and Simplified EKFs to Sensorless PM Brushless AC Machines

This paper employs an extended Kalman filter (EKF) to estimate the rotor position and speed of a vector controlled surface-mounted permanent magnet (PM) brushless AC (BLAC) motor from measured terminal voltages and currents only. Both full-order and simplified EKFs are employed and their simulated performance capabilities are compared. Excellent agreement is achieved between estimated and commanded results. The EKF is also employed to identify the stator flux-linkage due to the PMs, which is influenced by temperature variation and magnetic saturation.