An improved model of reciprocating compressor operation cycle with a stepless capacity control system is presented and influence of the key parameters of the system is evaluated. In the stepless capacity control syste...An improved model of reciprocating compressor operation cycle with a stepless capacity control system is presented and influence of the key parameters of the system is evaluated. In the stepless capacity control system of a reciprocating compressor,mechanical unloaders are used to partially hold suction valves open for a certain time during the compression stroke. The typical working process of the reciprocating compressor is changed by capacity regulation apparatus. However,some critical parameters like the hydraulic force acting at the unloader have not been rigorously studied in previous researches. Here an improved numerical model of a double acting reciprocating compressor under the control stepless capacity is proposed and verified by experimental trials. Numerical simulations are carried out to select and evaluate the acting force which definitely has an influence on indicator diagrams of compressors. It is observed that the optimized range of 350 N to 380 N is preferable for the unloader force such that the intensity of opening and closing impacts are minimized.展开更多
The vibration of machines due to rotating parts unbalance disturbs the machine functioning and shortens the lifetime of its parts. A dynamic vibration absorber is a favorite solution to suppress the machine vibration ...The vibration of machines due to rotating parts unbalance disturbs the machine functioning and shortens the lifetime of its parts. A dynamic vibration absorber is a favorite solution to suppress the machine vibration since its implementation does not require any modification neither on the machine nor on its installation. The paper considers an unbalanced machine to which a lumped mass dynamic vibration absorber is attached. Firstly, the machine equipped with the absorber is modeled, and the vibration expressions are extracted. Secondly, an original approach to optimize the absorber parameters is presented, and simulation results are advanced, when the absorber is undamped and damped. Thirdly, the absorber optimal parameters allowing the best vibration reduction of the machine are identified, showing bow the absorber should be designed, when the disturbance frequency is stable or unstable. The results are a significant contribution in the vibration control of unbalanced machines.展开更多
The hot deformation behavior of Ti 5.6Al-4.8Sn-2.0Zr-1.0Mo 0.35Si 0.85Nd alloy in β/quasi-β forging process was studied using isothermal compression tests over temperature range from 1040℃ to 1 100 ℃ and strain ra...The hot deformation behavior of Ti 5.6Al-4.8Sn-2.0Zr-1.0Mo 0.35Si 0.85Nd alloy in β/quasi-β forging process was studied using isothermal compression tests over temperature range from 1040℃ to 1 100 ℃ and strain rates form 0. 001 s-1 to 70 s -1. The results show that the flow stress and mierostrueture are sensitive to thermomechanical parameters. The processing maps based on the dynamic materials model at strain of 0.3 and 0.7 were established. The optimum deformation thermomechanical parameters at a strain of 0.7 have two regions that exhibit the peak of power dissipation efficiency. One is the region of 1062-1100 ℃ and 10- 3 10-1.5 s -1 ; and another which represents dynamic recrystallization is 1040-1045 ℃ and 10-1.8 10- 0.5 s -1. The instable region is located where the strain rate is larger than 1 s 1 which corresponds to the mechanical instability.展开更多
基金Supported by the National Key Research and Development Plan(No.2016YFF0203305)the National High Technology Research and Development Programme of China(No.2014AA041806)the Fundamental Research Funds for the Central Universities(No.ZY1617)
文摘An improved model of reciprocating compressor operation cycle with a stepless capacity control system is presented and influence of the key parameters of the system is evaluated. In the stepless capacity control system of a reciprocating compressor,mechanical unloaders are used to partially hold suction valves open for a certain time during the compression stroke. The typical working process of the reciprocating compressor is changed by capacity regulation apparatus. However,some critical parameters like the hydraulic force acting at the unloader have not been rigorously studied in previous researches. Here an improved numerical model of a double acting reciprocating compressor under the control stepless capacity is proposed and verified by experimental trials. Numerical simulations are carried out to select and evaluate the acting force which definitely has an influence on indicator diagrams of compressors. It is observed that the optimized range of 350 N to 380 N is preferable for the unloader force such that the intensity of opening and closing impacts are minimized.
文摘The vibration of machines due to rotating parts unbalance disturbs the machine functioning and shortens the lifetime of its parts. A dynamic vibration absorber is a favorite solution to suppress the machine vibration since its implementation does not require any modification neither on the machine nor on its installation. The paper considers an unbalanced machine to which a lumped mass dynamic vibration absorber is attached. Firstly, the machine equipped with the absorber is modeled, and the vibration expressions are extracted. Secondly, an original approach to optimize the absorber parameters is presented, and simulation results are advanced, when the absorber is undamped and damped. Thirdly, the absorber optimal parameters allowing the best vibration reduction of the machine are identified, showing bow the absorber should be designed, when the disturbance frequency is stable or unstable. The results are a significant contribution in the vibration control of unbalanced machines.
基金Item Sponsored by National Natural Science Foundation of China(51164030,51261020)Education Commission Foundation of Jiangxi Province of China(GJJ13501)
文摘The hot deformation behavior of Ti 5.6Al-4.8Sn-2.0Zr-1.0Mo 0.35Si 0.85Nd alloy in β/quasi-β forging process was studied using isothermal compression tests over temperature range from 1040℃ to 1 100 ℃ and strain rates form 0. 001 s-1 to 70 s -1. The results show that the flow stress and mierostrueture are sensitive to thermomechanical parameters. The processing maps based on the dynamic materials model at strain of 0.3 and 0.7 were established. The optimum deformation thermomechanical parameters at a strain of 0.7 have two regions that exhibit the peak of power dissipation efficiency. One is the region of 1062-1100 ℃ and 10- 3 10-1.5 s -1 ; and another which represents dynamic recrystallization is 1040-1045 ℃ and 10-1.8 10- 0.5 s -1. The instable region is located where the strain rate is larger than 1 s 1 which corresponds to the mechanical instability.
