This paper investigates the fault detection problem for discrete event systems (DESs) which can be modeled by partially observed Petri nets (POPNs). To overcome the problem of low diagnosability in the POPN online fau...This paper investigates the fault detection problem for discrete event systems (DESs) which can be modeled by partially observed Petri nets (POPNs). To overcome the problem of low diagnosability in the POPN online fault diagnoser in current use, an improved online fault diagnosis algorithm that integrates generalized mutual exclusion constraints (GMECs) and integer linear programming (ILP) is proposed. Assume that the POPN structure and its initial markings are known, and the faults are modeled as unobservable transitions. First, the event sequence is observed and recorded. GMEC is used for elementary diagnosis of the system behavior, then the ILP problem of POPN is solved for further diagnosis. Finally, an example of a real DES to test the new fault diagnoser is analyzed. The proposed algorithm increases the diagnosability of the DES remarkably, and the effectiveness of the new algorithm integrating GMEC and ILP is verified.展开更多
In this article, a nonlinear dynamic multiway partial least squares (MPLS) based on support vector machines (SVM) is developed for on-line fault detection in batch processes. The approach, referred to as SVM-based DMP...In this article, a nonlinear dynamic multiway partial least squares (MPLS) based on support vector machines (SVM) is developed for on-line fault detection in batch processes. The approach, referred to as SVM-based DMPLS, integrates the SVM with the MPLS model. Process data from normal historical batches are used to develop the MPLS model, and a series of single-input-single-output SVM networks are adopted to approximate nonlinear inner relationship between input and output variables. In addition, the application of a time-lagged window technique not only makes the complementarities of unmeasured data of the monitored batch unnecessary, but also significantly reduces the computation and storage requirements in comparison with the traditional MPLS. The proposed approach is validated by a simulation study of on-line fault detection for a fed-batch penicillin production.展开更多
In this article, a nonlinear dynamic multiway partial least squares (MPLS) based on support vector ma- chines (SVM) is developed for on-line fault detection in batch processes. The approach, referred to as SVM-based D...In this article, a nonlinear dynamic multiway partial least squares (MPLS) based on support vector ma- chines (SVM) is developed for on-line fault detection in batch processes. The approach, referred to as SVM-based DMPLS, integrates the SVM with the MPLS model. Process data from normal historical batches are used to de- velop the MPLS model, and a series of single-input-single-output SVM networks are adopted to approximate nonlinear inner relationship between input and output variables. In addition, the application of a time-lagged win- dow technique not only makes the complementarities of unmeasured data of the monitored batch unnecessary, but also significantly reduces the computation and storage requirements in comparison with the traditional MPLS. The proposed approach is validated by a simulation study of on-line fault detection for a fed-batch penicillin production.展开更多
An approach for batch processes monitoring and fault detection based on multiway kernel partial least squares(MKPLS) was presented.It is known that conventional batch process monitoring methods,such as multiway partia...An approach for batch processes monitoring and fault detection based on multiway kernel partial least squares(MKPLS) was presented.It is known that conventional batch process monitoring methods,such as multiway partial least squares(MPLS),are not suitable due to their intrinsic linearity when the variations are nonlinear.To address this issue,kernel partial least squares(KPLS) was used to capture the nonlinear relationship between the latent structures and predictive variables.In addition,KPLS requires only linear algebra and does not involve any nonlinear optimization.In this paper,the application of KPLS was extended to on-line monitoring of batch processes.The proposed batch monitoring method was applied to a simulation benchmark of fed-batch penicillin fermentation process.And the results demonstrate the superior monitoring performance of MKPLS in comparison to MPLS monitoring.展开更多
基金supported by the National Natural Science Foundation of China(61473144)
文摘This paper investigates the fault detection problem for discrete event systems (DESs) which can be modeled by partially observed Petri nets (POPNs). To overcome the problem of low diagnosability in the POPN online fault diagnoser in current use, an improved online fault diagnosis algorithm that integrates generalized mutual exclusion constraints (GMECs) and integer linear programming (ILP) is proposed. Assume that the POPN structure and its initial markings are known, and the faults are modeled as unobservable transitions. First, the event sequence is observed and recorded. GMEC is used for elementary diagnosis of the system behavior, then the ILP problem of POPN is solved for further diagnosis. Finally, an example of a real DES to test the new fault diagnoser is analyzed. The proposed algorithm increases the diagnosability of the DES remarkably, and the effectiveness of the new algorithm integrating GMEC and ILP is verified.
基金Supported by the National Natural Science Foundation of China (No.60574038) and the Open Project Program of the State Key Laboratory of Bioreactor Engineering/ECUST.
文摘In this article, a nonlinear dynamic multiway partial least squares (MPLS) based on support vector machines (SVM) is developed for on-line fault detection in batch processes. The approach, referred to as SVM-based DMPLS, integrates the SVM with the MPLS model. Process data from normal historical batches are used to develop the MPLS model, and a series of single-input-single-output SVM networks are adopted to approximate nonlinear inner relationship between input and output variables. In addition, the application of a time-lagged window technique not only makes the complementarities of unmeasured data of the monitored batch unnecessary, but also significantly reduces the computation and storage requirements in comparison with the traditional MPLS. The proposed approach is validated by a simulation study of on-line fault detection for a fed-batch penicillin production.
基金the National Natural Science Foundation of China (No.60574038) the Open Project Program of the State KeyLaboratory of Bioreactor Engineering/ECUST.
文摘In this article, a nonlinear dynamic multiway partial least squares (MPLS) based on support vector ma- chines (SVM) is developed for on-line fault detection in batch processes. The approach, referred to as SVM-based DMPLS, integrates the SVM with the MPLS model. Process data from normal historical batches are used to de- velop the MPLS model, and a series of single-input-single-output SVM networks are adopted to approximate nonlinear inner relationship between input and output variables. In addition, the application of a time-lagged win- dow technique not only makes the complementarities of unmeasured data of the monitored batch unnecessary, but also significantly reduces the computation and storage requirements in comparison with the traditional MPLS. The proposed approach is validated by a simulation study of on-line fault detection for a fed-batch penicillin production.
基金National Natural Science Foundation of China (No. 61074079)Shanghai Leading Academic Discipline Project,China (No.B504)
文摘An approach for batch processes monitoring and fault detection based on multiway kernel partial least squares(MKPLS) was presented.It is known that conventional batch process monitoring methods,such as multiway partial least squares(MPLS),are not suitable due to their intrinsic linearity when the variations are nonlinear.To address this issue,kernel partial least squares(KPLS) was used to capture the nonlinear relationship between the latent structures and predictive variables.In addition,KPLS requires only linear algebra and does not involve any nonlinear optimization.In this paper,the application of KPLS was extended to on-line monitoring of batch processes.The proposed batch monitoring method was applied to a simulation benchmark of fed-batch penicillin fermentation process.And the results demonstrate the superior monitoring performance of MKPLS in comparison to MPLS monitoring.
