Although hyperbaric oxygen (HBO) therapy can promote the recovery of neural function in patients who have suffered traumatic brain injury (TBI), the underlying mechanism is unclear. We hypothesized that hyperbaric...Although hyperbaric oxygen (HBO) therapy can promote the recovery of neural function in patients who have suffered traumatic brain injury (TBI), the underlying mechanism is unclear. We hypothesized that hyperbaric oxygen treatment plays a neuroprotective role in TBI by increasing regional transcranial oxygen saturation (rSO2) and oxygen partial pressure (PaO2). To test this idea, we compared two groups: a control group with 20 healthy people and a treatment group with 40 TBI patients. The 40 patients were given 100% oxygen of HBO for 90 minutes. Changes in rSO2 were measured. The controls were also examined for rSO2 and PaO2, but received no treatment, rSO2 levels in the patients did not differ significantly after treatment, but levels before and after treatment were significantly lower than those in the control group. PaO2 levels were significantly decreased after the 30-minute HBO treatment. Our findings suggest that there is a disorder of oxygen metabolism in patients with sub-acute TBI. HBO does not immediately affect cerebral oxygen metabolism, and the underlying mechanism still needs to be studied in depth.展开更多
Si-Al-Y co-deposition coatings were prepared on Ti-Al alloy by pack cementation processes at 1 050 ℃ for 4 h with different halide activators in the packs for enhancing the high temperature oxidation resistance of Ti...Si-Al-Y co-deposition coatings were prepared on Ti-Al alloy by pack cementation processes at 1 050 ℃ for 4 h with different halide activators in the packs for enhancing the high temperature oxidation resistance of Ti-Al alloy. The structure, constituent phases, formation process and oxidation behavior of the coatings were investigated. The experimental results showed that the coatings prepared respectively with NaF and NH_4Cl as activators were composed of a(Ti, X)_5Si_4,(Ti, X)_5Si_3(X represents Nb and Cr), and TiSi_2 outer layer, a TiAl_2 inner layer and an Al-rich interdiffusion zone. However, the constituent phases changed into TiSi_2 in the outer layer and(Ti, X)_5Si_4 and(Ti, X)_5Si_3 phases were observed in the middle layer of the coating prepared with AlCl_3·6H_2O activator. Among the halide activators studied, the coating prepared with AlCl_3·6H_2O was thicker and denser, which is the only suitable activator for pack Si-Al-Y co-deposition coatings on a Ti-Al alloy. The oxidation results show that the coating can protect the Ti-Al alloy from oxidation at 1000 ℃ in air for at least 80 h. The excellent oxidation resistance of the coating is attributed to the formation of a dense scale mainly consisted of TiO_2, SiO_2 and Al_2O_3.展开更多
The chromium oxide materials were prepared using Cr2O3 micropowder as main starting material, TiO2 micropowder as sintering aid, polyvinyl alcohol as binder, by a series of processes such as slurrying, spraying granul...The chromium oxide materials were prepared using Cr2O3 micropowder as main starting material, TiO2 micropowder as sintering aid, polyvinyl alcohol as binder, by a series of processes such as slurrying, spraying granulation, machine moulding and cold isostatic pressing, and firing at 1 500 ℃ for 3 h in air ( oxygen partial pressure was 2. 1× 10^4 Pa ), industrial nitrogen ( oxygen partial pressure was 1×10^3 Pa ) , pure nitrogen ( oxygen partial pressure was 10 Pa) , high purity nitrogen ( oxygen partial pressure was 0.1 Pa ) , and carbon cake embedded atmosphere ( oxygen partial pressure wtas 2.3×10-12 Pa ). Effects of oxygen partial pressures on the sintering behavior of Cr2 O3 materials were investiga- ted. The results show that ( 1 ) for 3 wt% TiO2-doped specimeas, there is a substantial dependence of sintering on oxygen partial pressure (0. 1 Pa - 2. 1 ×10^4 Pa ) , and the bulk density increases and apparent porosity decreases with oxygen partial pressure decreasing; (2) even if the oxygen partial pressure is 0. 1 Pa, the specimen without TiO2 cannot reach densification sintering; (3) under very low oxygen partial pressure of carbon embedded atmosphere, Cr2O3 materials containing TiO2 or not can attain denzification.展开更多
基金supported by a grant from Suzhou Key Medicine Project Fund of China,No.Szxk201504
文摘Although hyperbaric oxygen (HBO) therapy can promote the recovery of neural function in patients who have suffered traumatic brain injury (TBI), the underlying mechanism is unclear. We hypothesized that hyperbaric oxygen treatment plays a neuroprotective role in TBI by increasing regional transcranial oxygen saturation (rSO2) and oxygen partial pressure (PaO2). To test this idea, we compared two groups: a control group with 20 healthy people and a treatment group with 40 TBI patients. The 40 patients were given 100% oxygen of HBO for 90 minutes. Changes in rSO2 were measured. The controls were also examined for rSO2 and PaO2, but received no treatment, rSO2 levels in the patients did not differ significantly after treatment, but levels before and after treatment were significantly lower than those in the control group. PaO2 levels were significantly decreased after the 30-minute HBO treatment. Our findings suggest that there is a disorder of oxygen metabolism in patients with sub-acute TBI. HBO does not immediately affect cerebral oxygen metabolism, and the underlying mechanism still needs to be studied in depth.
基金the Key Scientific Research Projects in 2017 at North Minzu University(2017KJ05)
文摘Si-Al-Y co-deposition coatings were prepared on Ti-Al alloy by pack cementation processes at 1 050 ℃ for 4 h with different halide activators in the packs for enhancing the high temperature oxidation resistance of Ti-Al alloy. The structure, constituent phases, formation process and oxidation behavior of the coatings were investigated. The experimental results showed that the coatings prepared respectively with NaF and NH_4Cl as activators were composed of a(Ti, X)_5Si_4,(Ti, X)_5Si_3(X represents Nb and Cr), and TiSi_2 outer layer, a TiAl_2 inner layer and an Al-rich interdiffusion zone. However, the constituent phases changed into TiSi_2 in the outer layer and(Ti, X)_5Si_4 and(Ti, X)_5Si_3 phases were observed in the middle layer of the coating prepared with AlCl_3·6H_2O activator. Among the halide activators studied, the coating prepared with AlCl_3·6H_2O was thicker and denser, which is the only suitable activator for pack Si-Al-Y co-deposition coatings on a Ti-Al alloy. The oxidation results show that the coating can protect the Ti-Al alloy from oxidation at 1000 ℃ in air for at least 80 h. The excellent oxidation resistance of the coating is attributed to the formation of a dense scale mainly consisted of TiO_2, SiO_2 and Al_2O_3.
文摘The chromium oxide materials were prepared using Cr2O3 micropowder as main starting material, TiO2 micropowder as sintering aid, polyvinyl alcohol as binder, by a series of processes such as slurrying, spraying granulation, machine moulding and cold isostatic pressing, and firing at 1 500 ℃ for 3 h in air ( oxygen partial pressure was 2. 1× 10^4 Pa ), industrial nitrogen ( oxygen partial pressure was 1×10^3 Pa ) , pure nitrogen ( oxygen partial pressure was 10 Pa) , high purity nitrogen ( oxygen partial pressure was 0.1 Pa ) , and carbon cake embedded atmosphere ( oxygen partial pressure wtas 2.3×10-12 Pa ). Effects of oxygen partial pressures on the sintering behavior of Cr2 O3 materials were investiga- ted. The results show that ( 1 ) for 3 wt% TiO2-doped specimeas, there is a substantial dependence of sintering on oxygen partial pressure (0. 1 Pa - 2. 1 ×10^4 Pa ) , and the bulk density increases and apparent porosity decreases with oxygen partial pressure decreasing; (2) even if the oxygen partial pressure is 0. 1 Pa, the specimen without TiO2 cannot reach densification sintering; (3) under very low oxygen partial pressure of carbon embedded atmosphere, Cr2O3 materials containing TiO2 or not can attain denzification.