Effects of TiC addition on properties of laser particle deposited WC-Co-Cr and WC-Ni coatings

The mechanisms by which titanium carbide （TiC） improves the properties of tungsten carbide （WC） coatings deposited on duplex stainless steels using laser particle injection technique were investigated. The relationships between laser process parameters and the synthesized composite were studied. The morphologies and microstructures of the feedstock powders and composite coatings were characterized using scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDX） techniques. Surface hardness of the composite layers was determined using the Vickers microhardness tester while its corrosion behaviour in 3.5%NaCl solution was investigated by potentiodynamic polarization curve measurement method. As a result of the laser treatment, microstructures characterized by hard ceramic particles with strong bonding to substrate were formed on the surface layer of the steels. The addition of TiC to WC resulted in microstructures free from cracks, pores and intermetallics which could be detrimental to the properties of the composites. High microhardness was observed and most of the coatings shifted the corrosion potential to more noble values with the pseudo-passive curve.

Three-dimensional simulation of liquid injection,film formation and transport,in fluidized beds

Liquid injection, and film formation and transport in dense-phase gas-solids fluidized beds are numerically simulated in three dimensions using a collisional exchange model that is based on the mechanism that collisions cause transfer of liquid mass, momentum, and energy between particles. In the model, each of the particles is represented by a solid core and a liquid film surrounding the core. The model is incorporated in the framework of the commercial code Barracuda developed by CPFD Software. The commercial software is an advanced CFD-based computational tool where the particles are treated as discrete entities, calculated by the MP-PIC method, and tracked using the Lagrangian method. Details of the collisional liquid transfer model have been previously presented in O＇Rourke, Zhao, and Snider （2009）; this paper presents new capabilities and proof-testing of the collision model and a new method to better quantify the penetration length. Example calculations of a fluidized bed without liquid injection show the expected effect of collisions on the reduction of granular temperature （fluctuational kinetic energy） of the bed. When applied to liquid injection into a dense-phase fluidized bed under different conditions, the model predicts liquid penetration lengths comparable to the experiments. In addition, the simulation reveals for the first time the dynamic mixing of the liquid droplets with the bed particles and the transient distribution of the droplets inside the bed.

Radial propagation of magnetospheric substorm-injected energetic electrons observed using a BD-IES instrument and Van Allen Probes

In cases where substorm injections can be observed simultaneously by multiple spacecraft,they can help elucidate the potential mechanisms of particle transport and energization,of great importance to understanding and modeling the magnetosphere.In this paper,using data returned from the BeiDa-IES（BD-IES） instrument onboard a satellite in an inclined（55°） geosynchronous orbit（IGSO）,in combination with two geo-transfer orbiting（GTO） satellite Van Allen Probes（A and B）,we analyze a substorm injection event that occurred on the 16 th of October 2015.During this substorm injection,the IGSO onboard BD-IES was outbound,while both Van Allen Probe satellites（A and B） were inbound,a configuration of multiple trajectories that provides a unique opportunity to simultaneously investigate both the inward and outward radial propagation of substorm injection.Indicated by AE/AL indices,this substorm was closely related to an IMF/solar wind discontinuity that showed a sharp change in IMF Bz direction to the north.The innermost signature of this substorm injection was detected by Van Allen Probes A and B at L-3.7,while the outermost signature was observed by the onboard BD-IES instrument at L-10.These data indicate that the substorm had a global,rather than just local,effect.Finally,we suggest that electric fields carried by fast-mode compressional waves around the substorm injection are the most likely candidate mechanism for the electron injection signatures observed in the inner- and outermost inner magnetosphere.