Modeling the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer

In order to reveal the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer,the paper studies the air-flowing field and the droplet distribution under the condition of gentle breeze and normal forced ventilation in heading face using the particle tracking technology of computational fluid dynamics(CFD).The results show that air-flowing tendency in the same section presents great comparability in the period of gentle breeze and forced ventilation,and the difference mainly embodies in the different wind velocity.The influence of ventilation on the dispersion of droplets is faint under the gentle breeze condition.The droplet can be evenly distributed around the cutting head.However,under the normal forced ventilation,a large number of droplets will drift to the return air side.At the same time,droplet clusters are predominantly presented in the lower part of windward side and the middle of the leeward side around the cutting head.In contrast,the droplet concentration in other parts around cutting head decreases a lot and the droplets are unable to form close-grained mist curtain.So the dust escape channel is formed.In addition,the simulation results also reveal that the disturbance of air flow on the droplet distribution can be effectively relieved when using ventilation duct with Coanda effect(VDCE).Field experiment results show that the dust suppression efficiency of total dust and respirable dust increases respectively by 10.5%and 9.3%when using VDCE,which proves that it can weaken the influence of airflow on droplet dispersion.

Metal Particle Contamination in Gas-insulated Switchgears/Gas-insulated Transmission Lines

Metal particle contamination in a gas-insulated switchgear(GIS)or a gas-insulated transmission line(GIL)is an important factor leading to the decline of insulation performance.Exploring the deterioration mechanism and suppression measures of metal particles on insulation is a key technical problem in enhancing the dielectric strength of GIS/GIL equipment.In this paper,the charge and motion characteristics of metal particles are first introduced.The gas gap breakdown caused by free metal particles and the surface flashover caused by metal particles near or adsorbed on the insulator are then analyzed according to different particle motion patterns and spatial locations.Subsequently in terms of operation managements,the existing methods of particle detection are analyzed.In addition,the main inhibition methods of metal particles are introduced from three aspects:particle trap,insulator surface treatment and electrode coating.Finally,the prospects in the future research on particle pollution in GIS/GIL are also pointed out.