The close proximity and the necessity of coordination between multiple high-voltage direct currents(HVDCs)raise the issue of grid partitioning in multi-infeed HVDC systems.A multi-objective partition strategy is propo...The close proximity and the necessity of coordination between multiple high-voltage direct currents(HVDCs)raise the issue of grid partitioning in multi-infeed HVDC systems.A multi-objective partition strategy is proposed in this paper.Several types of relationships to be coordinated and complemented are analyzed and formulated using quantitative indices.According to the graph theory,the HVDC partition is transformed into a graph-cut problem and solved via the spectral clustering algorithm.Finally,the proposed method is validated for a practical multi-HVDC grid,confirming its feasibility and effectiveness.展开更多
Considering the defects of conventional optimization methods, a novel optimization algorithm is introduced in this paper. Target space partitioning method is used in this algorithm to solve multi-objective optimizatio...Considering the defects of conventional optimization methods, a novel optimization algorithm is introduced in this paper. Target space partitioning method is used in this algorithm to solve multi-objective optimization problem, thus achieve the coherent solution which can meet the requirements of all target functions, and improve the population's overall evolution level. The algorithm which guarantees diversity preservation and fast convergence to the Pareto set is applied to structural optimization problems. The empirical analysis supports the algorithm and gives an example with program.展开更多
Circuit partitioning plays a crucial role in very large-scale integrated circuit (VLSI) physical design automation. With current trends, partitioning with multiple objectives which includes cutsize, area, delay, and p...Circuit partitioning plays a crucial role in very large-scale integrated circuit (VLSI) physical design automation. With current trends, partitioning with multiple objectives which includes cutsize, area, delay, and power obtains much concentration. In this paper, a multi-objective greedy randomized adaptive search procedure (GRASP) is presented for simultaneous cutsize and circuit delay minimization. Each objective is assigned a preference or weight to direct the search procedure and generate a variety of efficient solutions by changing the preference. To get a good initial partition with minimal cutsize and circuit delay, the gain of each module in a circuit is computed by considering both signal nets and circuit delay. The performance of the proposed algorithm is evaluated on a standard set of partitioning benchmark. The experimental results show that the proposed algorithm can generate a set of Pareto optimal solutions and is efficient for tackling multi-objective circuit partitioning.展开更多
1 Introduction Let A be a collection of n pairwise disjoint simple closed curves on an orientable closed surface F of genus n ≥2. We say that A is a complete system of F if the surface obtained by cutting F along A i...1 Introduction Let A be a collection of n pairwise disjoint simple closed curves on an orientable closed surface F of genus n ≥2. We say that A is a complete system of F if the surface obtained by cutting F along A is a 2n-punctured sphere. Let A1, A2 be two non-empty subsets of A. We say that (A1,A2) is a partition of A if A1 ∩A2 = (?) and A1 ∪A2 = A. Let (A1, A2) be a partition of A on F, and C a simple closed curve on F. We say that C is separating with respect to (A1, A2) if it is disjoint from A and it cuts F into two pieces F1,F2 with A1(?) F1,A2 (?) F2.展开更多
The nonlinear dynamic modeling by combining the equivalent linear mechanics with the multi-objective optimization algorithm is proposed to describe the nonlinear behaviors of the joint interfaces.The joint interfaces ...The nonlinear dynamic modeling by combining the equivalent linear mechanics with the multi-objective optimization algorithm is proposed to describe the nonlinear behaviors of the joint interfaces.The joint interfaces are simplified as the equivalent virtual material or linear spring damper element.The genetic algorithm for multi-objective optimization is then used to identify the mechanical properties of the equivalent joint by minimizing the error between the simulated dynamic characteristics and the experimental results,including the modal frequencies of the bolted joint beam and the frequency response functions(FRFs)of the rubber isolation system.The FRFs are divided into several subsections with frequency-varied dynamic properties of the joint to consider the nonlinear dynamic behaviors,and the effects of subsection number and excitation amplitudes on the FRFs are also investigated.The results show that the simulated dynamic characteristics of modal frequencies and FRFs agree well with the experimental results.With the increase in the subsection number,the simulated FRFs agree better with the experimental results,indicating a good performance of modeling the nonlinear dynamic behaviors of the joint interfaces forced by different excitation amplitudes.Larger excitation amplitudes will decrease the joint stiffness.展开更多
In this work a multi-objective quantitative structure-property relationship (QSPR) analysis approach was reported based on the study on three partition properties of 50 aromatic sulfur-containing carboxylates. Here mu...In this work a multi-objective quantitative structure-property relationship (QSPR) analysis approach was reported based on the study on three partition properties of 50 aromatic sulfur-containing carboxylates. Here multi-objectives (properties) were taken as a vector for QSPR modeling. The quantitative correlations for partition properties were developed using a genetic algorithm-based variable-selection approach with quantum chemical descriptors derived from AM1-based calculations. With the QSPR models, the aqueous solubility, octanol/water partition coefficients and reversed-phase HPLC capacity factors of sulfur-containing compounds were estimated and predicted. Using GA-based multivariate linear regression with cross-validation procedure, a set of the most promising descriptors was selected from a pool of 28 quantum chemical semi-empirical descriptors, including steric and electronic types, to integrally build QSPR models. The selected molecular descriptors included the net charges on carboxyl group (Q OC), the 2nd power of net charges on nitrogen atoms (Q 2 N), the net atomic charge on the sulfur atoms (Q S), the van der Waals volume of molecule (V), the most positive net atomic charge on hydrogen atoms (Q H) and the measure of polarity and polarizability (π), which were main factors affecting the distribution processes of the compounds under study. The statistically best QSPR models of six descriptors were simultaneously obtained by GA-based linear regression analysis. With the selected descriptors and the QSPR equations, mechanisms of partition action of the Sulfur-containing carboxylates were able to be investigated and interpreted.展开更多
漏磁效应对永磁饱和型故障限流器(permanent-magnet-biased saturation based fault current limiter,PMFCL)的动态特性具有重要影响。针对一种直线式PMFCL的磁拓扑,以铁心磁通的工作零点作为分界阐明了其2个阶段的限流机理,指出铁心磁...漏磁效应对永磁饱和型故障限流器(permanent-magnet-biased saturation based fault current limiter,PMFCL)的动态特性具有重要影响。针对一种直线式PMFCL的磁拓扑,以铁心磁通的工作零点作为分界阐明了其2个阶段的限流机理,指出铁心磁通自过零反向后将发生畸变,永磁体不再参与限流过程。基于磁场分割原理实现2类等效磁路模型中总漏磁导和漏磁系数的计算,针对拟圆环截面磁通管的漏磁导,提出基于曲线拟合而改变积分变量的求解方法。在Matlab/Simulink环境下建立了考虑漏磁效应的PMFCL仿真模型,分别与小电流和大电流工况的实验结果进行对比,验证了建模方法的有效性。展开更多
基金supported by the Science and Technology Project of State Grid Corporation of China:“Control Strategy Optimization Technology for Large-Scale Photovoltaic Power Generation on the Sending-end and Receiving-end of DC Power System”(4000-201934198A-0-0-00)
文摘The close proximity and the necessity of coordination between multiple high-voltage direct currents(HVDCs)raise the issue of grid partitioning in multi-infeed HVDC systems.A multi-objective partition strategy is proposed in this paper.Several types of relationships to be coordinated and complemented are analyzed and formulated using quantitative indices.According to the graph theory,the HVDC partition is transformed into a graph-cut problem and solved via the spectral clustering algorithm.Finally,the proposed method is validated for a practical multi-HVDC grid,confirming its feasibility and effectiveness.
基金National Natural Science Foundations of China (No. 60970004, No. 60743010)Natural Science Foundation of ShandongProvince, China (No. Z2008G02)
文摘Considering the defects of conventional optimization methods, a novel optimization algorithm is introduced in this paper. Target space partitioning method is used in this algorithm to solve multi-objective optimization problem, thus achieve the coherent solution which can meet the requirements of all target functions, and improve the population's overall evolution level. The algorithm which guarantees diversity preservation and fast convergence to the Pareto set is applied to structural optimization problems. The empirical analysis supports the algorithm and gives an example with program.
基金National Natural Science Foudation of China (No. 61070020 )Research Foundation for Doctoral Program of Ministry of Education,China (No. 20093514110004)Foundations of Education Department of Fujian Province,China (No. JA10284,No. JB07283)
文摘Circuit partitioning plays a crucial role in very large-scale integrated circuit (VLSI) physical design automation. With current trends, partitioning with multiple objectives which includes cutsize, area, delay, and power obtains much concentration. In this paper, a multi-objective greedy randomized adaptive search procedure (GRASP) is presented for simultaneous cutsize and circuit delay minimization. Each objective is assigned a preference or weight to direct the search procedure and generate a variety of efficient solutions by changing the preference. To get a good initial partition with minimal cutsize and circuit delay, the gain of each module in a circuit is computed by considering both signal nets and circuit delay. The performance of the proposed algorithm is evaluated on a standard set of partitioning benchmark. The experimental results show that the proposed algorithm can generate a set of Pareto optimal solutions and is efficient for tackling multi-objective circuit partitioning.
基金Supported in part by a grant (10171024) of NSFC a grant of the outstanding Youth fellowship of Hei Long Jiang Province.
文摘1 Introduction Let A be a collection of n pairwise disjoint simple closed curves on an orientable closed surface F of genus n ≥2. We say that A is a complete system of F if the surface obtained by cutting F along A is a 2n-punctured sphere. Let A1, A2 be two non-empty subsets of A. We say that (A1,A2) is a partition of A if A1 ∩A2 = (?) and A1 ∪A2 = A. Let (A1, A2) be a partition of A on F, and C a simple closed curve on F. We say that C is separating with respect to (A1, A2) if it is disjoint from A and it cuts F into two pieces F1,F2 with A1(?) F1,A2 (?) F2.
基金The work was supported by the Science Challenge Project(Grant No.TZ2018007)The authors also thank the National Natural Science Foundation of China(Grant Nos.11872059,11702279)National Defense Technology Foundation of China(Grant No.JSUS2018212C)for providing the financial support for this project.
文摘The nonlinear dynamic modeling by combining the equivalent linear mechanics with the multi-objective optimization algorithm is proposed to describe the nonlinear behaviors of the joint interfaces.The joint interfaces are simplified as the equivalent virtual material or linear spring damper element.The genetic algorithm for multi-objective optimization is then used to identify the mechanical properties of the equivalent joint by minimizing the error between the simulated dynamic characteristics and the experimental results,including the modal frequencies of the bolted joint beam and the frequency response functions(FRFs)of the rubber isolation system.The FRFs are divided into several subsections with frequency-varied dynamic properties of the joint to consider the nonlinear dynamic behaviors,and the effects of subsection number and excitation amplitudes on the FRFs are also investigated.The results show that the simulated dynamic characteristics of modal frequencies and FRFs agree well with the experimental results.With the increase in the subsection number,the simulated FRFs agree better with the experimental results,indicating a good performance of modeling the nonlinear dynamic behaviors of the joint interfaces forced by different excitation amplitudes.Larger excitation amplitudes will decrease the joint stiffness.
文摘In this work a multi-objective quantitative structure-property relationship (QSPR) analysis approach was reported based on the study on three partition properties of 50 aromatic sulfur-containing carboxylates. Here multi-objectives (properties) were taken as a vector for QSPR modeling. The quantitative correlations for partition properties were developed using a genetic algorithm-based variable-selection approach with quantum chemical descriptors derived from AM1-based calculations. With the QSPR models, the aqueous solubility, octanol/water partition coefficients and reversed-phase HPLC capacity factors of sulfur-containing compounds were estimated and predicted. Using GA-based multivariate linear regression with cross-validation procedure, a set of the most promising descriptors was selected from a pool of 28 quantum chemical semi-empirical descriptors, including steric and electronic types, to integrally build QSPR models. The selected molecular descriptors included the net charges on carboxyl group (Q OC), the 2nd power of net charges on nitrogen atoms (Q 2 N), the net atomic charge on the sulfur atoms (Q S), the van der Waals volume of molecule (V), the most positive net atomic charge on hydrogen atoms (Q H) and the measure of polarity and polarizability (π), which were main factors affecting the distribution processes of the compounds under study. The statistically best QSPR models of six descriptors were simultaneously obtained by GA-based linear regression analysis. With the selected descriptors and the QSPR equations, mechanisms of partition action of the Sulfur-containing carboxylates were able to be investigated and interpreted.
文摘漏磁效应对永磁饱和型故障限流器(permanent-magnet-biased saturation based fault current limiter,PMFCL)的动态特性具有重要影响。针对一种直线式PMFCL的磁拓扑,以铁心磁通的工作零点作为分界阐明了其2个阶段的限流机理,指出铁心磁通自过零反向后将发生畸变,永磁体不再参与限流过程。基于磁场分割原理实现2类等效磁路模型中总漏磁导和漏磁系数的计算,针对拟圆环截面磁通管的漏磁导,提出基于曲线拟合而改变积分变量的求解方法。在Matlab/Simulink环境下建立了考虑漏磁效应的PMFCL仿真模型,分别与小电流和大电流工况的实验结果进行对比,验证了建模方法的有效性。