In-situ interfacial passivation and self-adaptability synergistically stabilizing all-solid-state lithium metal batteries

The function of solid electrolytes and the composition of solid electrolyte interphase(SEI)are highly significant for inhibiting the growth of Li dendrites.Herein,we report an in-situ interfacial passivation combined with self-adaptability strategy to reinforce Li_(0.33)La_(0.557)TiO_(3)(LLTO)-based solid-state batteries.Specifically,a functional SEI enriched with LiF/Li_(3)PO_(4) is formed by in-situ electrochemical conversion,which is greatly beneficial to improving interface compatibility and enhancing ion transport.While the polarized dielectric BaTiO_(3)-polyamic acid(BTO-PAA,BP)film greatly improves the Li-ion transport kinetics and homogenizes the Li deposition.As expected,the resulting electrolyte offers considerable ionic conductivity at room temperature(4.3 x 10~(-4)S cm^(-1))and appreciable electrochemical decomposition voltage(5.23 V)after electrochemical passivation.For Li-LiFePO_(4) batteries,it shows a high specific capacity of 153 mA h g^(-1)at 0.2C after 100 cycles and a long-term durability of 115 mA h g^(-1)at 1.0 C after 800 cycles.Additionally,a stable Li plating/stripping can be achieved for more than 900 h at 0.5 mA cm^(-2).The stabilization mechanisms are elucidated by ex-situ XRD,ex-situ XPS,and ex-situ FTIR techniques,and the corresponding results reveal that the interfacial passivation combined with polarization effect is an effective strategy for improving the electrochemical performance.The present study provides a deeper insight into the dynamic adjustment of electrode-electrolyte interfacial for solid-state lithium batteries.

Enhancing the Performance of Perovskite Light-Emitting Diodes via Synergistic Effect of Defect Passivation and Dielectric Screening

Metal halide perovskites,particularly the quasi-two-dimensional perovskite subclass,have exhibited considerable potential for next-generation electroluminescent materials for lighting and display.Nevertheless,the presence of defects within these perovskites has a substantial influence on the emission efficiency and durability of the devices.In this study,we revealed a synergistic passivation mechanism on perovskite films by using a dual-functional compound of potassium bromide.The dual functional potassium bromide on the one hand can passivate the defects of halide vacancies with bromine anions and,on the other hand,can screen the charged defects at the grain boundaries with potassium cations.This approach effectively reduces the probability of carriers quenching resulting from charged defects capture and consequently enhances the radiative recombination efficiency of perovskite thin films,leading to a significant enhancement of photoluminescence quantum yield to near-unity values(95%).Meanwhile,the potassium bromide treatment promoted the growth of homogeneous and smooth film,facilitating the charge carrier injection in the devices.Consequently,the perovskite light-emitting diodes based on this strategy achieve a maximum external quantum efficiency of~21%and maximum luminance of~60,000 cd m^(-2).This work provides a deeper insight into the passivation mechanism of ionic compound additives in perovskite with the solution method.

Bifunctional passivation by lewis-base molecules for efficient printable mesoscopic perovskite solar cells

Printable mesoscopic perovskite solar cells(PM-PSCs)possess notable merits in terms of cost-effectiveness,easy manufacturing,and large scale applications.Nevertheless,the absence of a hole transport layer contributes to the exacerbation of carrier recombination,and the defects between the perovskite and electron transport layer(ETL)interfaces significantly decrease the efficiency of the devices.In this study,a bifunctional surface passivation approach is proposed by applying a thioacetamide(TAA)surfactant on the mesoporous TiO_(2)interface.The results demonstrate that TAA molecules could interact with TiO_(2),thereby diminishing the oxygen vacancy defects.Additionally,the amino group and sulfur atoms in TAA molecules act as Lewis base to effectively passivate the uncoordinated Pb^(2+)in perovskite and improve the morphology of perovskite,and decrease the trap-state density of perovskite.The TAA passivation mechanism improves the alignment of energy levels between TiO_(2)and perovskite,facilitating electron transport and reducing carrier recombination.Consequently,the TAA-passivated device achieved a champion power conversion efficiency(PCE)of 17.86%with a high fill factor(FF)of 79.16%and an open-circuit voltage(V_(OC))of 0.971 V.This investigation presents a feasible strategy for interfacial passivation of the ETL to further improve the efficiency of PM-PSCs.

Constructing Al@C-Sn pellet anode without passivation layer for lithium-ion battery

Al is considered as a promising lithium-ion battery(LIBs)anode materials owing to its high theoretical capacity and appropri-ate lithation/de-lithation potential.Unfortunately,its inevitable volume expansion causes the electrode structure instability,leading to poor cyclic stability.What’s worse,the natural Al2O3 layer on commercial Al pellets is always existed as a robust insulating barrier for elec-trons,which brings the voltage dip and results in low reversible capacity.Herein,this work synthesized core-shell Al@C-Sn pellets for LIBs by a plus-minus strategy.In this proposal,the natural Al2O3 passivation layer is eliminated when annealing the pre-introduced SnCl2,meanwhile,polydopamine-derived carbon is introduced as dual functional shell to liberate the fresh Al core from re-oxidization and alle-viate the volume swellings.Benefiting from the addition of C-Sn shell and the elimination of the Al2O3 passivation layer,the as-prepared Al@C-Sn pellet electrode exhibits little voltage dip and delivers a reversible capacity of 1018.7 mAh·g^(-1) at 0.1 A·g^(-1) and 295.0 mAh·g^(-1) at 2.0 A·g^(-1)(after 1000 cycles),respectively.Moreover,its diffusion-controlled capacity is muchly improved compared to those of its counterparts,confirming the well-designed nanostructure contributes to the rapid Li-ion diffusion and further enhances the lithium storage activity.

Synergistic defect passivation and strain compensation toward efficient and stable perovskite solar cells

Rational interface engineering is essential for minimizing interfacial nonradiative recombination losses and enhancing device performance.Herein,we report the use of bidentate diphenoxybenzene(DPOB)isomers as surface modifiers for perovskite films.The DPOB molecules,which contain two oxygen(O)atoms,chemically bond with undercoordinated Pb^(2+) on the surface of perovskite films,resulting in compression of the perovskite lattice.This chemical interaction,along with physical regulations,leads to the formation of high-quality perovskite films with compressive strain and fewer defects.This compressive strain-induced band bending promotes hole extraction and transport,while inhibiting charge recombination at the interfaces.Furthermore,the addition of DPOB will reduce the zero-dimensional(OD) Cs_4PbBr_6 phase and produce the two-dimensional(2D) CsPb_(2)Br_5 phase,which is also conducive to the improvement of device performance.Ultimately,the resulting perovskite films,which are strain-released and defect-passivated,exhibit exceptional device efficiency,reaching 10.87% for carbon-based CsPbBr_(3) device,14.86% for carbon-based CsPbI_(2)Br device,22,02% for FA_(0.97)Cs_(0.03)PbI_(3) device,respectively.Moreover,the unencapsulated CsPbBr_(3) PSC exhibits excellent stability under persistent exposure to humidity(80%) and heat(80℃) for over 50 days.

Zn Dissolution-Passivation Behavior with ZnO Formation via In Situ Characterizations

In this study,ZnO formation during the dissolution-passivation process of Zn anodes is observed via in situ Raman and optical characterization.The Zn passivation during galvanostatic anodization merely follows the dissolution-precipitation model,whereas that of potentiodynamic polarization exhibits different behaviors in different potential ranges.Initially,the Zn electrode is gradually covered by a ZnO precipitation film and then undergoes solid-state oxidation at~255 mV.The starting point of solid-state oxidation is well indicated by the abrupt current drop and yellow coloration of the electrode surface.During the pseudo passivation,an intense current oscillation is observed.Further,blink-like color changes between yellow and dark blue are revealed for the first time,implying that the oscillation is caused by the dynamic adsorption and desorption of OH groups.The as-formed ZnOs then experience a dissolution-reformation evolution,during which the crystallinity of the primary ZnO film is improved but the solid-state-formed ZnO layer becomes rich in oxygen vacancies.Eventually,oxide densification is realized,contributing to the Zn passivation.This study provides new insights into the Zn dissolution-passivation behavior,which is critical for the future optimization of Zn batteries.

Role of self-assembled molecules’anchoring groups for surface defect passivation and dipole modulation in inverted perovskite solar cells

Inverted perovskite solar cells have gained prominence in industrial advancement due to their easy fabrication,low hysteresis effects,and high stability.Despite these advantages,their efficiency is currently limited by excessive defects and poor carrier transport at the perovskite-electrode interface,particularly at the buried interface between the perovskite and transparent conductive oxide(TCO).Recent efforts in the perovskite community have focused on designing novel self-assembled molecules(SAMs)to improve the quality of the buried interface.However,a notable gap remains in understanding the regulation of atomic-scale interfacial properties of SAMs between the perovskite and TCO interfaces.This understanding is crucial,particularly in terms of identifying chemically active anchoring groups.In this study,we used the star SAM([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)as the base structure to investigate the defect passivation effects of eight common anchoring groups at the perovskite-TCO interface.Our findings indicate that the phosphonic and boric acid groups exhibit notable advantages.These groups fulfill three key criteria:they provide the greatest potential for defect passivation,exhibit stable adsorption with defects,and exert significant regulatory effects on interface dipoles.Ionized anchoring groups exhibit enhanced passivation capabilities for defect energy levels due to their superior Lewis base properties,which effectively neutralize local charges near defects.Among various defect types,iodine vacancies are the easiest to passivate,whereas iodine-substituted lead defects are the most challenging to passivate.Our study provides comprehensive theoretical insights and inspiration for the design of anchoring groups in SAMs,contributing to the ongoing development of more efficient inverted perovskite solar cells.

Improved efficiency and stability of inverse perovskite solar cells via passivation cleaning

Amidst the global energy and environmental crisis,the quest for efficient solar energy utilization intensifies.Perovskite solar cells,with efficiencies over 26%and cost-effective production,are at the forefront of research.Yet,their stability remains a barrier to industrial application.This study introduces innovative strategies to enhance the stability of inverted perovskite solar cells.By bulk and surface passivation,defect density is reduced,followed by a"passivation cleaning"using Apacl amino acid salt and isopropyl alcohol to refine film surface quality.Employing X-ray diffraction(XRD),scanning electron microscope(SEM),and atomic force microscopy(AFM),we confirmed that this process effectively neutralizes surface defects and curbs non-radiative recombination,achieving 22.6%efficiency for perovskite solar cells with the composition Cs_(0.15)FA_(0.85)PbI_(3).Crucially,the stability of treated cells in long-term tests has been markedly enhanced,laying groundwork for industrial viability.

Doping PCBM with fullerene phosphinate derivatives enhances the interface energy alignment and synergistic passivation capability

Phenyl-C_(61)-butyric acid methyl ester(PCBM) serves as a common electron transport layer(ETL) in inverted p-i-n structure perovskite solar cells(IPSCs),yet energy barriers and insufficient passivation at the PCBM-perovskite interface hinder device effectiveness and durability.In this study,we present a series of novel Fullerene Phenylacid Ester Derivatives(FPEDs:FPP,FTPP,FDPP) incorporated into PCBM.Our investigations illustrate that FPEDs effectively act to passivate the perovskite surface by forming robust interactions with uncoordinated Pb^(2+) ions via the phosphine oxide groups present in their molecular structures,thereby enhancing the stability of the devices.Moreover,these additives elevate the energy level of the lowest unoccupied molecular orbital(LUMO) of ETL,diminish the electron injection barrier,and enhance the efficiency of interlayer electron transport.Incorporating FPEDs enhances ETL coverage on the perovskite layer,reducing leakage current significantly.Notably,Devices with PCBM/FTPP achieved a peak PCE of 23.62% and showed superior stability,maintaining 96,8% of the initial PCE after 500 h,while control devices retained merely 80.7% over the same period.

Probabilistic Assessment of Reinforcing Steel Depassivation in Concrete under Aggressive Chloride Environments Based on Natural Exposure Data

The probability distributions of the critical threshold chloride concentration Ccr, the chloride diffusion coefficient D, and the surface chloride concentration Cs are determined based on the collected natural exposure data, and the probability estimation of reinforcement depassivation in concrete is presented using Monte-Carlo simulation. From sensitivity analysis of mean value for ccr, cs, and D on the depassivation probability of reinforcement, it is found that ccr, cs, and D respectively has the greatest, smaller, and the lowest effect on the probability of depassivation. Finally the effect of stress state of concrete on the reinforcement depassivation probability is analyzed. It is found that the influence of stress state becomes apparent as exposure time increases.

LOCALISED DEPASSIVATION OF TITANIUM IN VITRO

Highly localized and minute depassivation events are recorded using 50μm diametertitanium microelectrode in Ringer's physiological solution. These transient events are believed to be due to microscopic breakdown of passivity and occur well below the pitting potential of the metal. A mechanism is proposed to explain the observed phenomenon.Possible implications on passivity and the application of metallic biomaterials in vivo are also discussed.

First-principles calculations of the hole-induced depassivation of SiO2/Si interface defects

The holes induced by ionizing radiation or carrier injection can depassivate saturated interface defects.The depassivation of these defects suggests that the deep levels associated with the defects are reactivated,affecting the performance of devices.This work simulates the depassivation reactions between holes and passivated amorphous-SiO_(2)/Si interface defects(HP_(b)+h→P_(b)+H^(+)).The climbing image nudged elastic band method is used to calculate the reaction curves and the barriers.In addition,the atomic charges of the initial and final structures are analyzed by the Bader charge method.It is shown that more than one hole is trapped by the defects,which is implied by the reduction in the total number of valence electrons on the active atoms.The results indicate that the depassivation of the defects by the holes actually occurs in three steps.In the first step,a hole is captured by the passivated defect,resulting in the stretching of the Si-H bond.In the second step,the defect captures one more hole,which may contribute to the breaking of the Si-H bond.The H atom is released as a proton and the Si atom is three-coordinated and positively charged.In the third step,an electron is captured by the Si atom,and the Si atom becomes neutral.In this step,a Pb-type defect is reactivated.

High efficiency CZTSSe solar cells enabled by dual Ag-passivation approach via aqueous solution process

Ag substitution in Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is a promising way to mitigate Cu/Zn related defects,electrostatic fluctuations and Shockley-Read-Hall(SRH)recombination centers.However,high performance ACZTSSe solar cells are generally demonstrated with more Ag amounts and strenuous fabrication processes,which are not ideal when using cheap constituent materials CZTSSe.To reduce the Ag amount(2%-3%),local Ag substitutions into CZTSSe at front(F),back(B)and dual front/back(FB)were proposed.Experimental results revealed that F-passivation effectively reduced the Cu/Zn related defects and further limits the interface/bulk recombination whereas B-passivation improved the grain growth at the back interface and further allows enhanced transport of charge carriers.By employing the dual Agpassivation approach,the final ACZTSSe device parameters were significantly improved and remarkable power conversion efficiency(PCE)of 12.43%was achieved with eco-friendly aqueous solution process.

Mixed Cations Enabled Combined Bulk and Interfacial Passivation for Efficient and Stable Perovskite Solar Cells

Here,we report a mixed GAI and MAI(MGM)treatment method by forming a 2D alternating-cation-interlayer(ACI)phase(n=2)perovskite layer on the 3D perovskite,modulating the bulk and interfacial defects in the perovskite films simultaneously,leading to the suppressed nonradiative recombination,longer lifetime,higher mobility,and reduced trap density.Consequently,the devices’performance is enhanced to 24.5%and 18.7%for 0.12 and 64 cm^(2),respectively.In addition,the MGM treatment can be applied to a wide range of perovskite compositions,including MA-,FA-,MAFA-,and CsFAMA-based lead halide perovskites,making it a general method for preparing efficient perovskite solar cells.Without encapsulation,the treated devices show improved stabilities.

Surface Passivation Toward Efficient and Stable Perovskite Solar Cells

Although metal halide perovskites are increasingly popular for the next generation of efficient photovoltaic devices,the inevitable defects from the preparation process have become the notorious barrier to further improvement of performance,which increases non-radiative recombination and lowers the power conversion efficiency of solar cells.Surface passivation strategies have been affirmed as one of the most practical approaches to suppress these defects.Therefore,it is necessary to have a detailed review on the surface passivation to reveal the improvements of the devices.Herein,the mechanism and recent advances of surface passivation have been systematically summarized with respect to various passivation approaches,including the Lewis acid–base,the low-dimensional perovskite,inorganic molecules,and polymers.Finally,the review also offers the research trend and prospects of surface passivation.

Passivation engineering via silica‐encapsulated quantum dots for highly sensitive photodetection

Organometal halide perovskites are promising semiconducting materials for photodetectors because of their favorable optoelectrical properties.Although nanoscale perovskite materials such as quantum dots(QDs)show novel behavior,they have intrinsic stability issues.In this study,an effectively silane barrier-capped quantum dot(QD@APDEMS)is thinly applied onto a bulk perovskite photosensitive layer for use in photodetectors.QD@APDEMS is synthesized with a silane ligand with hydrophobic CH_(3)-terminal groups,resulting in excellent dispersibility and durability to enable effective coating.The introduction of the QD@APDEMS layer results in the formation of a lowdefect perovskite film with enlarged grains.This is attributed to the grain boundary interconnection effect via interaction between the functional groups of QD@APDEMS and uncoordinated Pb^(2+)in grain boundaries.By passivating the grain boundaries,where various trap sites are distributed,hole chargecarrier injection and shunt leakage can be suppressed.Also,from the energy point of view,the deep highest occupied molecular orbital(HOMO)level of QD@APDEMS can work as a hole charge injection barrier.Improved charge dynamics(generation,transfer,and recombination properties)and reduced trap density of QD@APDEMS are demonstrated.When this perovskite film is used in a photodetector,the device performance(especially the detectivity)stands out among existing perovskites evaluated for energy sensing device applications.

Recent Progress of Surface Passivation Molecules for Perovskite Solar Cell Applications

Due to the solution processable nature,the prepared perovskite films are polycrystalline with considerable number of defects.These defects,especially defects at interface accelerate the carrier recombination and reduce the carrier collection.Besides,the surface defects also affect the long-term stability of the perovskite solar cells(PVSCs).To solve this problem,surface passivation molecules are introduced at selective interface(the interface between perovskite and carrier selective layer).This review summarizes recent progress of small molecules used in PVSCs.Firstly,different types of defect states in perovskite films are introduced and their effects on device performance are discussed.Subsequently,surface passivation molecules are divided into four categories,and the interaction between the functional groups of the surface passivation molecules and selective defect states in perovskite films are highlighted.Finally,we look into the prospects and challenges in design noble small molecules for PVSCs applications.

Efficient Semi‑Transparent Wide‑Bandgap Perovskite Solar Cells Enabled by Pure‑Chloride 2D‑Perovskite Passivation

Wide-bandgap(WBG)perovskite solar cells suffer from severe non-radiative recombination and exhibit relatively large opencircuit voltage(V_(OC))deficits,limiting their photovoltaic performance.Here,we address these issues by in-situ forming a well-defined 2D perovskite(PMA)_(2)PbCl_(4)(phenmethylammonium is referred to as PMA)passivation layer on top of the WBG active layer.The 2D layer with highly pure dimensionality and halide components is realized by intentionally tailoring the side-chain substituent at the aryl ring of the post-treatment reagent.First-principle calculation and single-crystal X-ray diffraction results reveal that weak intermolecular interactions between bulky PMA cations and relatively low cation-halide hydrogen bonding strength are crucial in forming the well-defined 2D phase.The(PMA)_(2)PbCl_(4)forms improved type-I energy level alignment with the WBG perovskite,reducing the electron recombination at the perovskite/hole-transport-layer interface.Applying this strategy in fabricating semi-transparent WBG perovskite solar cells(indium tin oxide as the back electrode),the V_(OC)deficits can be reduced to 0.49 V,comparable with the reported state-of-the-art WBG perovskite solar cells using metal electrodes.Consequently,we obtain hysteresis-free 18.60%-efficient WBG perovskite solar cells with a high V_(OC)of 1.23 V.

Phase Regulation and Defect Passivation Enabled by Phosphoryl Chloride Molecules for Efficient Quasi‑2D Perovskite Light‑Emitting Diodes

Quasi-2D perovskites have attracted tremendous interest for application as lightemission layers in light-emitting diodes(LEDs).However,the heterogeneous n phase and non-uniform distribution still severely limit the further development of quasi-2D perovskite LEDs(Pero-LEDs).Meanwhile,the increased defect density caused by the reduced dimension and grain size induces non-radiative recombination and further deteriorates the device performance.Here,we found that a series of molecules containing phosphoryl chloride functional groups have noticeable enhancement effects on the device performance of quasi-2D Pero-LEDs.Then,we studied the modification mechanism by focusing on the bis(2-oxo-3-oxazolidinyl)phosphinic chloride(BOPCl).It is concluded that the BOPCl can not only regulate the phase distribution by decreasing the crystallization rate but also remain in the grain boundaries and passivate the defects.As a result,the corresponding quasi-2D Pero-LEDs obtained a maximum external quantum efficiency(EQE_(max))of 20.82%and an average EQE(EQE_(ave))of around 20%on the optimal 50 devices,proving excellent reproducibility.Our work provides a new selection of molecular types for regulating the crystallization and passivating the defects of quasi-2D perovskite films.

Anti-Corrosion and Reconstruction of Surface Crystal Plane for Zn Anodes by an Advanced Metal Passivation Technique

For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatment to solve these issues for Zn anodes are still great challenges.Herein,a simple and cheap metal passivation technique is proposed for Zn anodes from a corrosion science perspective.Similar to the metal anticorrosion engineering,the formed interfacial protective layer in a chemical way can sufficiently solve the corrosion issues.Furthermore,the proposed passivity approach can reconstruct Zn surface-preferred crystal planes,exposing more(002)planes and improving surface hydrophilicity,which inhibits the formation of Zn dendrites and hydrogen evolution effectively.As expected,the passivated Zn achieves outstanding cycling life(1914 h)with low voltage polarization(<40 mV).Even at 6 mA cm^(−2) and 3 mA h cm^(−2),it can achieve stable Zn deposition over 460 h.The treated Zn anode coupled with MnO_(2) cathode shows prominently reinforced full batteries service life,making it a potential Zn anode candidate for excellent performance aqueous Zn-ion batteries.The proposed passivation approach provides a guideline for other metal electrodes preparation in various batteries and establishes the connections between corrosion science and batteries.