High stability and low noise laser-diode end-pumped Nd:YAG ceramic passively Q-switched laser at 1123 nm based on a Ti_(3)C_(2)T_(x)-PVA saturable absorber

We report a high repetition frequency, high power stability and low laser noise laser-diode(LD) end-pumped Nd: YAG ceramic passively Q-switched laser at 1123 nm based on a Ti_(3)C_(2)T_(x)-polyvinyl alcohol(PVA) film as a saturable absorber(SA). A Brewster polarizer(BP) and a birefringent crystal(BC) are incorporated to enable frequency selection and filtering for the passively Q-switched 1123 nm pulsed laser to improve the power stability and reduce the noise. When the pump power is 5.1 W, an average output power of 457.9 m W is obtained, corresponding to a repetition frequency of 1.09 MHz,a pulse width of 56 ns, a spectral line width of 0.65 nm, a power instability of ±0.92%, and a laser noise of 0.89%.The successful implementation of the “Ti_(3)C_(2)T_(x)-PVA film passively Q-switching” combined with “frequency selection and filtering of BP + BC” technology path provides a valuable reference for developing pulsed laser with high repetition frequency, high stability and low noise.

Sodium Nitrate Passivation as a Novel Insulation Technology for Soft Magnetic Composites

Sodium nitrate passivation has been developed as a new insulation technology for the production of FeSiAl soft magnetic composites (SMCs). In this work, the evolution of coating layers grown at different pH values is investigated involving analyses on their composition and microstructure. An insulation coating obtained using an acidic NaNO_(3) solution is found to contain Fe2O_(3), SiO_(2), Al2O_(3), and AlO(OH). The Fe2O_(3) transforms into Fe3O4 with weakened oxidizability of the NO_(3)– at an elevated pH, whereas an alkaline NaNO_(3) solution leads to the production of Al2O_(3), AlO(OH), and SiO_(2). Such growth is explained from both thermodynamic and kinetic perspectives and is correlated to the soft magnetic properties of the FeSiAl SMCs. Under tuned passivation conditions, optimal performance with an effective permeability of 97.2 and a core loss of 296.4 mW∙cm−3 is achieved at 50 kHz and 100 mT.

Passively Q-switched diode-pumped Tm,Ho:LuVO4 laser with a black phosphorus saturable absorber

We presented a passively Q-switched(PQS) diode-pumped c-cut Tm, Ho:LuVO_4 laser with a black phosphorus saturable absorber for the first time.Under PQS mode, an average output power of 0.86 W and a peak power of 2.32 W were acquired from the Tm, Ho:LuVO4 laser with the pump power of 14.55 W, corresponding to a pulse width of 2.89 μs,a pulse repetition rate of 71.84 kHz, and a pulse energy of about 6.70 μJ.

Passively Q-Switched Nd,Cr:YAG Laser Simultaneous Dual-Wavelength Operation at 946 nm and 1.3μm

A diode-end-pumped Q-switched high-efficiency Nd, Cr：YAG laser with simultaneous dual-wavelength emission at 946nm and 1.3μm is demonstrated. The maximum output power of 1.93 W with simultaneous dual-wavelength operation is achieved at an absorbed pump power of 13.32 W and an absorbed slope efficiency of 15.15%. The maximum optical-optical efficiency is 14.49% with pulse widths of 16.38ns at 946nm and 26.65ns at 1.3μm. A maximum total repetition rate of 43.25 kHz is obtained.

Q-Switched Raman Fiber Laser with Molybdenum Disulfide-Based Passive Saturable Absorber

We demonstrate a Q-switched Raman fiber laser using molybdenum disulfide （MoS2） as a saturable absorber （SA）. The SA is assembled by depositing a mechanically exfoliated MoS2 onto a fiber ferrule facet before it is matched with another clean ferrule via a connector. It is inserted in a Raman fiber laser cavity with a total cavity length of about 8kin to generate a Q-switching pulse train operating at 1560.2nm. A 7.7-kin-long dispersion compensating fiber with 584 ps.nm-i km-1 of dispersion is used as a nonlinear gain medium. As the pump power is increased from 395 m W to 422 m W, the repetition rate of the Q-switching pulses can be increased from 132.7 to 137.4 kHz while the pulse width is concurrently decreased from 3.35μs to 3.03μs. The maximum pulse energy of 54.3 nJ is obtained at the maximum pump power of 422 roW. These results show that the mechanically exfoliated MoS2 SA has a great potential to be used for pulse generation in Raman fiber laser systems.

Efficient Passively Q-Switched Nd:YAG/Cr4+:YAG/LBO Microchip Laser

Performance of an LD-end-pumped passively Q-switched Nd： YA G/Cr4＋ ： YA G microchip laser operating at 1123 nm is studied. A maximum average output power of 517row with an optical-to-optical conversion efficiency of 12.6% and a slope efficiency of 25.8% is obtained under a pump power of 4.1 W. A minimum pulse width of 1.1 ns with a pulse repetition rate of 20.2kHz is obtained, and the corresponding pulse energy and peak power are 25.6μJ and 23.3kW, respectively. To our knowledge, the 23.3kW peak power is the highest among 1123nm lasers. Additionally, based on the 1123 nm laser, with LBO as the frequency doubler, a 288-mW green-yellow laser at 561 nm is successfully achieved.

High-Power Passively Q-Switched Nd:YAG Laser at 1112 nm with a Cr^(4+):YAG Saturable Absorber

A high-power passively Q-switched Nd：YAG laser operating at lll2nm with Cr4＋：yAO as a saturable absorber is demonstrated. Under 808 nm diode-direct pumping, the maximum average output power of 2.73 W is achieved at the pump power of 16.65 W, corresponding to an optical-to-optical conversion efficiency of 16.4%. At the same time, the pulse width, pulse repetition rate, single pulse energy and peak power are 27.2ns, 9 kHz, 303.3#3 and 11.2kW, respectively. As far as we know, the result gives the highest average output power at 1112nm generated by an 808 nm diode-end-pumped Nd：YAG laser.

Er^3+,Yb^3+:glass-Co^2+:MgAl2O4 diffusion bonded passively Q-switched laser

A Co^2＋：spinel passively Q-switched erbium-ytterbium-phosphate glass bonded laser pumped at 940 nm is reported.A pulse energy of 210 μJ, a peak power over 70 kW, and beam quality M-2 parameter of 1.2 are obtained under a pump power of 235 mW. An unbonded laser output experiment with the same dimension of the active material and the saturable absorber as the bonded laser output experiment is carried out. The reason why the output in the bonded laser is improved is determined.

Modelling of passively Q-switched lasers with intracavity Raman conversion

We present a model of passively Q-switched Raman lasers by utilizing the rate equations. The intracavity fun-damental photon density, Raman photon density and the initial population-inversion density of the gain medium are assumed to be of Gaussian spatial distributions. These rate equations are normalized by introducing some synthetic parameters and solved numerically, and a group of general curves are generated. Prom these curves we can understand the dependence of the Raman laser pulse characteristics on the parameters about the pumping, the gain medium, the Raman medium and the resonator. An illustrative calculation for a passively Q-switched Nd^3＋：GdVO4 self-Raman laser is presented to demonstrate the usage of the curves and related formulas.

Energy-saving Technology of Vent in Passive Solar Wall of Rural House of Severe Cold Region

This paper aims at solving the problems of low thermal collection rate,inconvenient maintenance,hindering indoor using during the application of passive solar technologies in rural houses in severe cold region.All these defects prevent the passive solar houses' further development. This paper chooses trombe wall,which has higher thermal efficiency of the passive solar house,as research object. The traditional vent is improved into a new type of ventilation device. This improvement overcomes the shortcoming,which traditional vent loses huge heat,and simplifies the construction of vent. Comparing with traditional trombe wall,the energy saving rate is 15. 69%.

Cr2+:ZnS Saturable Absorber Passively Q-Switched Ho:LuVO4 Laser

We report a cw Tm：YAP laser resonantly pumped Ho：LuV04 laser in passively Q-switched （PQS） mode with Cr2＋ ：ZnS as a saturable absorber （SA）. The influence of different transmittances of the output coupler on laser output performance is analyzed. With T = 50%, the max/mum PQS average output power of 2.3 W is ob- tained, corresponding to the slope efficiency and the optical-optical conversion efficiency are 35.1% and 19.8%, respectively. Also, the minimum pulse width of 100ns is achieved at the maximum pulse repetition frequency of 34.2kHz. When the maximum cw output power is 2.7W, the beam quality factor of the horizontal direc- tion Mx2 = 1.04 and the vertical direction M2 = 1.10 are obtained. In addition, the central wavelength of the laser output remains to be 2057.5nm with the output coupler transmittances of 50% and 60% in both cw and PQS operations. The results show that the Cr2＋：ZnS can be used as an SA in a Ho：LuVO4 laser around 2-μm wavelength.

Passively Q-Switched Nd:YVO_4 Laser Using a Gold Nanotriangle Saturable Absorber

A passively Q-switched Nd：YVO4 laser at 1064 nm is demonstrated based on a gold nanotriangle saturable absorber（GNT SA）.Under a pump power of 3.82 W,the maximum average output power of 218mW is achieved,corresponding to a slope efficiency of 12.9%.The minimum pulse width is 165ns and the maximum pulse repetition rate is 300kHz at the pump power of 3.48 W.Our results prove that the GNT SA is a promising saturable absorber for near-infrared lasers.

Passively Q-Switched Ho:SSO Laser by Use of a Cr2+:ZnSe Saturable Absorber

A cw operation and a passively Q-switched （PQS） Ho：SSO laser （Cr2＋ ：ZnSe as a saturable absorber） end-pumped by a TIn：YAP laser operating at near room temperature are reported. It is the first time to report a PQS Ho：SSO laser. For the ew mode, a maximum cw output power of 3.0 W is obtMned, corresponding to a slope efficiency of 31.4%. For the PQS mode, a Cr2＋ ：ZnSe is used as the saturable absorber, with transmission of 88.4% at 2112nm. A maximum pulse energy of 1.29mJ is obtained, corresponding to the pulse repetition frequency of 2.42kHz. In this study, we change the distance between Cr2＋ ：ZnSe and the output mirror to research the pulse characteristic of the PQ, S Ho：SSO laser. The minimum pulse width of 73.5ns is obtained, corresponding to the pulse energy of O. 9 mJ and the pulse repetition frequency of 2.65 kHz.

A Single-Longitudinal-Mode Passively Q-Switched Nd:YVO4 Laser Using Black Phosphorus Saturable Absorber

A black phosphorus (BP) saturable absorber (SA) solution with different concentrations (1.0 and 0.5 mg/ml) is fabricated with the liquid-phase exfoliation method. By using the BP-SA, a compact diode-pumped passively Q-switched Nd:YVO4 laser is demonstrated. One reflecting Bragg gratings is used as the output coupler for mode selection. By inserting those BP-SA solutions in the laser cavity, the maximum single longitude mode, Q-switched output powers of 126mW at 692.5 kHz and 149mW at 630.3 kHz are achieved at the pump power of 8.0 W, corresponding to the pulse durations of 144 ns and 196 ns, respectively. Moreover, longitudinal-mode characteristics of Q-switched output laser in different optical cavity lengths based on two-kind BP-SA solution concentrations are investigated. Our results show that BP-SA could also be developed as an effective SA for the Q-switched, single longitudinal mode pulse laser.

Passively Q-Switched Yb-Doped Fiber Laser Operating at 1.06 μm with Two-Dimensional Silver Nanoplate as Saturable Absorber

A two-dimensional silver nanoplate is prepared with the seed-mediated growth method and is used for achieving pulse fiber laser operation. By controlling the dimension parameters of the silver nanoplate, the surface plasmon resonance absorption peak of the material is successfully adjusted to 1068 nm. Based on the silver nanoplate as a saturable absorber, a passively Q-switched Yb-doped fiber laser operating at 1062 nm is demonstrated. The maximum average output power of 3.49mW is obtained with a minimum pulse width of 1.84#s at a pulse repetition rate of 65.TkHz, and the corresponding pulse energy and peak power are 53.1 nJ and 28.8mW, respectively.

Experimental Study on a Passively Q-Switched Ho:YLF Laser with Polycrystalline Cr2+:ZnS as a Saturable Absorber

Output performance of a continuous-wave TIn：YAP laser pumped passively Q-switched Ho：YLF laser is demon- strated with a polycrystalline Cr2＋ ：ZnS as the saturable absorber. We compare the experimental results at the three different distances L of the polycrystalline Cr2＋ ：ZnS saturable absorber to the output coupler. The pulse width almost remains constant for different L, when the incident pump power is changed in the range of 7.9 27.1 W. The shortest pulse duration of 33.3 ns for L = 105 mm and the highest average output power of 6.8 W for L = 5 mm are obtMned at the incident pump power of 27.1 W. The output wavelength of the passively Q-switched laser shifts to 2045.2nm from 2064.7nm in the cw operation. The beam quality factor of M2 is 1.2.

Numerical Study on the Suitability of Passive Solar Heating Technology Based on Differentiated Thermal Comfort Demand

Indoor thermal comfort and passive solar heating technologies have been extensively studied.However,few studies have explored the suitability of passive solar heating technologies based on differentiated thermal comfort demands.This work took the rural dwellings in Northwest China as the research object.First,the current indoor and outdoor thermal environment in winter and the mechanism of residents’differentiated demand for indoor thermal comfort were obtained through tests,questionnaires,and statistical analysis.Second,a comprehensive passive optimized design of existing buildings was conducted,and the validity of the optimized combination scheme was explored using DesignBuilder software.Finally,the suitability of passive solar heating technology for each region in Northwest China was analyzed based on residents’differentiated demand for indoor thermal comfort.The regions were then classified according to the suitability of the technology for these.The results showed that the indoor heating energy consumption was high and the indoor thermal environment was not ideal,yet the solar energy resources were abundant.Indoor comfort temperature indexes that match the functional rooms and usage periods were proposed.For the buildings with the optimized combination scheme,the average indoor temperature was increased significantly and the temperature fluctuation was decreased dramatically.Most regions in Northwest China were suitable for the development of passive solar heating technology.Based on the obtained suitability of the technology for the regions of Northwest China,these were classified into most suitable,more suitable,less suitable,and unsuitable regions.

Dual-Wavelength Passively Q-Switched Ytterbium-Doped Fiber Laser Based on Aluminum Oxide Nanoparticle Saturable Absorbers

We report on generation of a dual-wavelength, all-fiber, passively Q-switched ytterbium-doped fiber laser using aluminum oxide nanoparticle （Al2O3-NP） thin film. A thin film of Al2O3 was prepared by embedding Al2O3-NPs into a polyvinyl alcohol （PVA） as a host polymer, and then inserted between two fiber ferrules to act as a saturable absorber （SA）. By incorporating the Al2O3-PVA SA into the laser cavity, a stable dual-wavelength pulse output centered at 1050 and 1060.7nm is observed at threshold pump power of 80mW. As the pump power is gradually increased from 80 to 300mW, the repetition rate of the generated pulse increases from 16.23 to 59 kHz, while the pulse width decreases from 19 to 6μs. To the best of our knowledge, this is the first demonstration for this type of SA operating in the 1 μm region.

Passively Q-switched Tm/Ho composite laser

We explored Q-switching mechanism for the newly proposed Tm/Ho composite laser via developing a hybrid resonator for separating the intra-cavity Tm laser modulated by the saturable absorber(SA).With a Cr:ZnSe SA,successful passively Q-switching process with the maximum average output power of 474 mW and the shortest pulse width of 145 ns were obtained at the pulse repetition frequency of 7.14 kHz,where dual wavelength oscillation in both 2090 nm and 2097 nm was observed.This work provides an effective way for a direct laser diode(LD)pumped Q-switched Ho laser,which is compact and accessible.Furthermore,the current SA could be replaced by the 2D materials with broadband saturable absorption such as topological insulators or transition-metal dichalcogenides for seeking novel PQS lasers.

Diode Pumped High Peak Power Quasi Q-Switched and Passively Q-Switched Nd:YVO₄Lasers at 1064 nm and 532 nm using Cr:YAG and KTP crystals

Diode end-pumped solid-state lasers have the potential to yield high quality laser beams with high efficiency for laser range finding and warning receiver applications as well as day and night military laser designation systems. In this paper we presents theoretical calculations using Advanced Dynamics Professional LASCAD software and experimental studies for a high power pigtailed fiber diode laser module of 8 W operating at 808 nm with a specially designed high efficiency cooling system, end pumped high-efficiency Nd:YVO4 laser of 3 × 3 × 10 mm rod and overall cavity length of 44 mm. To the best of our knowledge a self Q-switching effects was generated in Nd:YVO4 laser by changing the cavity dimensions and the position of the intracavity KTP crystal at certain regime of operation for the first time, in which the cavity length is reduced to be 30 mm and the distance between Nd:YVO4 rod and KTP crystal is only 1mm. Self Q-switched laser pulse at 532 nm with high peak power of 96 W, pulse width of 88 ns at FWHM and repetition rate of 400 kHz was achieved. Experimental studies of a passive Q-switched Nd:YVO4 laser using Cr:YAG crystal with three different transmissions of 30%, 40% and 70% were investigated. Passive Q-switched laser pulse at 1064 nm and narrow line width of less than 1.5 nm with highest peak power of nearly 18 kW, short pulse width of less than 4 ns at FWHM and higher repetition rate of 45 kHz using Cr:YAG with transmission of 30% was achieved for the first time.