Passive intermodulation(PIM)interference urgently needs to be solved in the satellite communication system,owing to degrading the whole performance.Mainstream research contributions to the cancellation method for PIM ...Passive intermodulation(PIM)interference urgently needs to be solved in the satellite communication system,owing to degrading the whole performance.Mainstream research contributions to the cancellation method for PIM were focused on the analog domain,however,the PIM distortion cannot be eliminated completely with the approaches.Meanwhile,some researchers attempt to tackle the problem through digital signal processing,nevertheless,the proposed methods were not suitable for the practical satellite communication scenario.In this paper,we present a general scheme for the adaptive feedforward PIM cancellation.High-order PIM signals at baseband are estimated by modeling the PIM distortion with Hammerstein model in the digital domain.Based on the reconstructed PIM signal,we adopt the least mean square algorithm to adaptively mitigate the PIM interference for tracking the variation of PIM.The time and frequency synchronization of PIM are based on the correlation of the peak of received signals with the corresponding reconstructed PIM signal.Practical experimental results show that the scheme can effectively cancel the PIM interference,and achieve an interference suppression gain more than 20dB.展开更多
In order to expand the cell coverage of wireless cellular systems, the number of passive components in wireless systems has been substantially increased. There can be many passive intermodulation(PIM) pointsources eve...In order to expand the cell coverage of wireless cellular systems, the number of passive components in wireless systems has been substantially increased. There can be many passive intermodulation(PIM) pointsources even in a device or a radio link, which may add up constructively or destructively. A modified point-source model with lossy components is proposed to evaluate the superposition effect of the forward and refl ected PIM in case of series connection. The index of the series connection factor(SCF) is employed for systems that incorporate multiple PIM sources to predict the important characteristics of the cumulative PIM, such as the maximum and minimum values and the limit form. Furthermore, some initial experimental results are given out and the deviation in the above-mentioned prediction is also analyzed.展开更多
In order to analyze the deleterious effects of Passive InterModulation (PIM) on high power communication satellite systems, the basic concept of PIM is introduced, and an equation for the power spectral density of the...In order to analyze the deleterious effects of Passive InterModulation (PIM) on high power communication satellite systems, the basic concept of PIM is introduced, and an equation for the power spectral density of the n-th order PIM distortion insuch systems is derived by applying flat signal-power spectrum assumption and Fourier transform method. It is indicated that PIM level generally decreases with order and the lowest frequency receive channel in the receive band is the channel of most affected by PIM interference.展开更多
In modern wireless communication systems,the signal-to-noise ratio(SNR)is one of the most important performance indicators.When the other radio frequency(RF)performance of the components is well designed,passive inter...In modern wireless communication systems,the signal-to-noise ratio(SNR)is one of the most important performance indicators.When the other radio frequency(RF)performance of the components is well designed,passive intermodulation(PIM)interference may become an important factor limiting the system’s SNR.Whether it is a base station,an indoor distributed antenna system,or a satellite system,there are stringent PIM level requirements to minimize interference and enhance network capacity in multicarrier networks.Especially for systems of high power and wide bandwidth such as 5G wireless communication,PIM interference is even more serious.Due to the complexity and uncertainty of PIM,measurement is the most important means to study and evaluate the PIM performance of wireless communication systems.In this review,the current main PIM measurement methods recommended by International Electrotechnical Commission(IEC)and other standard organizations are introduced,and several key challenges in PIM measurement and their solutions(including the design of PIM tester,the location of the PIM sources,the design of compact PIM anechoic chambers,and the evaluation methods of PIM anechoic chambers)are highlighted.These challenges are of great significance to solve PIM problems that may arise during device characterization and verification in real wireless communication systems.展开更多
基金financially supported by the Joint Fund of NSFC and the General Purpose Technology Research Program under the contract U1636125,NSFC under the contract U1836201
文摘Passive intermodulation(PIM)interference urgently needs to be solved in the satellite communication system,owing to degrading the whole performance.Mainstream research contributions to the cancellation method for PIM were focused on the analog domain,however,the PIM distortion cannot be eliminated completely with the approaches.Meanwhile,some researchers attempt to tackle the problem through digital signal processing,nevertheless,the proposed methods were not suitable for the practical satellite communication scenario.In this paper,we present a general scheme for the adaptive feedforward PIM cancellation.High-order PIM signals at baseband are estimated by modeling the PIM distortion with Hammerstein model in the digital domain.Based on the reconstructed PIM signal,we adopt the least mean square algorithm to adaptively mitigate the PIM interference for tracking the variation of PIM.The time and frequency synchronization of PIM are based on the correlation of the peak of received signals with the corresponding reconstructed PIM signal.Practical experimental results show that the scheme can effectively cancel the PIM interference,and achieve an interference suppression gain more than 20dB.
文摘In order to expand the cell coverage of wireless cellular systems, the number of passive components in wireless systems has been substantially increased. There can be many passive intermodulation(PIM) pointsources even in a device or a radio link, which may add up constructively or destructively. A modified point-source model with lossy components is proposed to evaluate the superposition effect of the forward and refl ected PIM in case of series connection. The index of the series connection factor(SCF) is employed for systems that incorporate multiple PIM sources to predict the important characteristics of the cumulative PIM, such as the maximum and minimum values and the limit form. Furthermore, some initial experimental results are given out and the deviation in the above-mentioned prediction is also analyzed.
文摘In order to analyze the deleterious effects of Passive InterModulation (PIM) on high power communication satellite systems, the basic concept of PIM is introduced, and an equation for the power spectral density of the n-th order PIM distortion insuch systems is derived by applying flat signal-power spectrum assumption and Fourier transform method. It is indicated that PIM level generally decreases with order and the lowest frequency receive channel in the receive band is the channel of most affected by PIM interference.
文摘In modern wireless communication systems,the signal-to-noise ratio(SNR)is one of the most important performance indicators.When the other radio frequency(RF)performance of the components is well designed,passive intermodulation(PIM)interference may become an important factor limiting the system’s SNR.Whether it is a base station,an indoor distributed antenna system,or a satellite system,there are stringent PIM level requirements to minimize interference and enhance network capacity in multicarrier networks.Especially for systems of high power and wide bandwidth such as 5G wireless communication,PIM interference is even more serious.Due to the complexity and uncertainty of PIM,measurement is the most important means to study and evaluate the PIM performance of wireless communication systems.In this review,the current main PIM measurement methods recommended by International Electrotechnical Commission(IEC)and other standard organizations are introduced,and several key challenges in PIM measurement and their solutions(including the design of PIM tester,the location of the PIM sources,the design of compact PIM anechoic chambers,and the evaluation methods of PIM anechoic chambers)are highlighted.These challenges are of great significance to solve PIM problems that may arise during device characterization and verification in real wireless communication systems.
