Discrimination Voltage and Overdrive Bias Dependent Performance Evaluation of Passively Quenched SiC Single-Photon-Counting Avalanche Photodiodes

In many critical civil and emerging military applications, low-level UV detection, sometimes at single photon level, is highly desired. In this work, a mesa-type 4H-SiC UV avalanche photodiode （APD） is designed and fabricated, which exhibits low leakage current and high avalanche gain. When studied by using a passive quenching circuit, the APD exhibits self-quenching characteristics due to its high differential resistance in the avalanche region. The single photon detection efficiency and dark count rate of the APD are evaluated as functions of discrimination voltage and over-drive voltage. The optimized operation conditions of the single photon counting APD are discussed.

Robust passive control for discrete-time T-S fuzzy systems with delays

This article deals with the robust stability analysis and passivity of uncertain discrete-time Takagi- Sugeno （T-S） fuzzy systems with time delays. The T-S fuzzy model with parametric uncertainties can approximate nonlinear uncertain systems at any precision. A sufficient condition on the existence of robust passive controller is established based on the Lyapunov stability theory. With the help of linear matrix inequality （LMI） method, robust passive controllers are designed so that the closed-loop system is robust stable and strictly passive. Furthermore, a convex optimization problem with LMI constraints is formulated to design robust passive controllers with the maximum dissipation rate. A numerical example illustrates the validity of the proposed method.

Influence of annealing temperature on passivation performance of thermal atomic layer deposition Al_2O_3 films

Chemical and field-effect passivation of atomic layer deposition （ALD） Al2O3 films are investigated, mainly by corona charging measurement. The interface structure and material properties are characterized by transmission electron microscopy （TEM） and X-ray photoelectron spectroscopy （XPS）, respectively. Passivation performance is improved remarkably by annealing at temperatures of 450 ℃ and 500 ℃, while the improvement is quite weak at 600 ℃, which can be attributed to the poor quality of chemical passivation. An increase of fixed negative charge density in the films during annealing can be explained by the Al2O3/Si interface structural change. The Al–OH groups play an important role in chemical passivation, and the Al–OH concentration in an as-deposited film subsequently determines the passivation quality of that film when it is annealed, to a certain degree.

Performance of passive target tracking using bearing-frequency and bearings of multiple arrays

Two target motion analysis (TMA) methods using multi-dimension information are studied, one is TMA with bearing-frequency and the other is TMA with multiple arrays. The optimization algorithm combining Gauss-Newton (G-N) method with Levenberg-Marquardt (L- M) method is applied to analyze the performance of target tracking with maximum likelihood estimation(MLE), and Monte Carlo experiments are presented. The results show that although the TMA with multi-dimension information have eliminated the maneuvers needed by conven- tional bearing-only TMA, but the application are not of universality

Mixed H_∞ and Passive Projective Synchronization for Fractional Order Memristor-Based Neural Networks with Time-Delay and Parameter Uncertainty

This paper investigates the mixed Ho~ and passive projective synchronization problem for fractional-order （FO） memristor-based neural networks. Our aim is to design a controller such that, though the unavoidable phenomena of time-delay and parameter uncertainty are fully considered, the resulting closed-loop system is asymptotically stable with a mixed H∞ and passive performance level. By combining active and adaptive control methods, a novel hybrid control strategy is designed, which can guarantee the robust stability of the closed-loop system and also ensure a mixed H∞ and passive performance level. Via the application of FO Lyapunov stability theory, the projective synchronization conditions are addressed in terms of linear matrix inequaiity techniques. Finally, two simulation examples are given to illustrate the effectiveness of the proposed method.