Comparisons of passive microwave remote sensing sea ice concentrations with ship-based visual observations during the CHINARE Arctic summer cruises of 2010–2018

In order to apply satellite data to guiding navigation in the Arctic more effectively,the sea ice concentrations(SIC)derived from passive microwave(PM)products were compared with ship-based visual observations(OBS)collected during the Chinese National Arctic Research Expeditions(CHINARE).A total of 3667 observations were collected in the Arctic summers of 2010,2012,2014,2016,and 2018.PM SIC were derived from the NASA-Team(NT),Bootstrap(BT)and Climate Data Record(CDR)algorithms based on the SSMIS sensor,as well as the BT,enhanced NASA-Team(NT2)and ARTIST Sea Ice(ASI)algorithms based on AMSR-E/AMSR-2 sensors.The daily arithmetic average of PM SIC values and the daily weighted average of OBS SIC values were used for the comparisons.The correlation coefficients(CC),biases and root mean square deviations(RMSD)between PM SIC and OBS SIC were compared in terms of the overall trend,and under mild/normal/severe ice conditions.Using the OBS data,the influences of floe size and ice thickness on the SIC retrieval of different PM products were evaluated by calculating the daily weighted average of floe size code and ice thickness.Our results show that CC values range from 0.89(AMSR-E/AMSR-2 NT2)to 0.95(SSMIS NT),biases range from−3.96%(SSMIS NT)to 12.05%(AMSR-E/AMSR-2 NT2),and RMSD values range from 10.81%(SSMIS NT)to 20.15%(AMSR-E/AMSR-2 NT2).Floe size has a significant influence on the SIC retrievals of the PM products,and most of the PM products tend to underestimate SIC under smaller floe size conditions and overestimate SIC under larger floe size conditions.Ice thickness thicker than 30 cm does not have a significant influence on the SIC retrieval of PM products.Overall,the best(worst)agreement occurs between OBS SIC and SSMIS NT(AMSR-E/AMSR-2 NT2)SIC in the Arctic summer.

A Method for Surface Roughness Parameter Estimation in Passive Microwave Remote Sensing

Surface roughness parameter is an important factor and obstacle for retrieving soil moisture in passive microwave remote sensing.Two statistical parameters,root mean square (RMS) height (s) and correlation length (l),are designed for describing the roughness of a randomly rough surface.The roughness parameter measured by traditional way is independence of frequency,soil moisture and soil heterogeneity and just the ″geometric″ roughness of random surface.This ″geometric″ roughness can not fully explain the scattered thermal radiation by the earth's surface.The relationship between ″geometric″ roughness and integrated roughness (contain both ″geometric″ roughness and ″dielectric″ roughness) is linked by empirical coefficient.In view of this problem,this paper presents a method for estimating integrated surface roughness from radiometer sampling data at different frequencies,which mainly based on the flourier relationship between power spectral density distribution and spatial autocorrelation function.We can obtain integrated surface roughness at different frequencies by this method.Besides "geometric" roughness,this integrated surface roughness not only contains "dielectric" roughness but also includes frequency dependence.Combined with Q/H model the polarization coupling coefficient can also be obtained for both H and V polarization.Meanwhile,the simulated numerical results show that radiometer with a sensitivity of 0.1 K can distinguish the different surface roughness and the change of roughness with frequency for the same rough surface.This confirms the feasibility of radiometer sampling method for estimating the surface roughness theoretically.This method overcomes the problem of ″dielectric″ roughness measurement to some extent and can achieve the integrated surface roughness within a microwave pixel which can serve soil moisture inversion better than the ″geometric″ roughness.

Coupling numerical simulation with remotely sensed information for the study of frozen soil dynamics

The acquisition of spatial-temporal information of frozen soil is fundamental for the study of frozen soil dynamics and its feedback to climate change in cold regions.With advancement of remote sensing and better understanding of frozen soil dynamics,discrimination of freeze and thaw status of surface soil based on passive microwave remote sensing and numerical simulation of frozen soil processes under water and heat transfer principles provides valuable means for regional and global frozen soil dynamic monitoring and systematic spatial-temporal responses to global change.However,as an important data source of frozen soil processes,remotely sensed information has not yet been fully utilized in the numerical simulation of frozen soil processes.Although great progress has been made in remote sensing and frozen soil physics,yet few frozen soil research has been done on the application of remotely sensed information in association with the numerical model for frozen soil process studies.In the present study,a distributed numerical model for frozen soil dynamic studies based on coupled water-heat transferring theory in association with remotely sensed frozen soil datasets was developed.In order to reduce the uncertainty of the simulation,the remotely sensed frozen soil information was used to monitor and modify relevant parameters in the process of model simulation.The remotely sensed information and numerically simulated spatial-temporal frozen soil processes were validated by in-situ field observations in cold regions near the town of Naqu on the East-Central Tibetan Plateau.The results suggest that the overall accuracy of the algorithm for discriminating freeze and thaw status of surface soil based on passive microwave remote sensing was more than 95%.These results provided an accurate initial freeze and thaw status of surface soil for coupling and calibrating the numerical model of this study.The numerically simulated frozen soil processes demonstrated good performance of the distributed numerical model based on the coupled water-heat transferring theory.The relatively larger uncertainties of the numerical model were found in alternating periods between freezing and thawing of surface soil.The average accuracy increased by about 5%after integrating remotely sensed information on the surface soil.The simulation accuracy was significantly improved,especially in transition periods between freezing and thawing of the surface soil.

STUDY AND APPLICATION OF THE AERIAL PASSIVE MICROWAVE REMOTE SENSING

Ⅰ. Introduction Over the past two decades, microwave remote sensing has evolved into a focal point in the remote sensing area. This is due to the fact that in microwave band, we can acquire physical parameters about ocean, terrain and atmosphere on all weather condition. Research and application work about the aerial passive micro wave remote sensors has been done at Changchun Institute of Geography since 1973, under the unitary planning of Academia Sinica. Microwave radiometers of six freqency bands have been developed. Numerous remote sensing experiments were carried out, and large amount of scientific data were accumulated. Recently, theoretical models have

Review on retrieval of lunar regolith thickness by active and passive microwave measurements

It is one of the important methods to retrieve lunar regolith thickness using active and passive microwave techniques.The retrieval of lunar regolith thickness is based on microwave radiation transfer process simulation in the regolith media.The lunar regolith model is first introduced,and the features of the involved physical parameters are indicated thereafter,such as dielectric constants,surface roughness,particle size and thermal grads of the lunar regolith.The time delay and the migration of the radar echoes from the different interfaces is the key problem for active microwave measurement.And the simulation of the microwave radiative transfer in the regolith media is the important technique for the passive microwave measurement.The important parameters and the physical mechanism for the two measurements are also presented.

Development of piezoelectric-based technology for application in civil structural health monitoring

Piezoelectric material,as one of the great potential materials,had attracted lots of attention all over the world due to its distinguish advantages.In this paper,the development of piezoelectric-based technology for application in the field of civil structural health monitoring(CSHM),was summarized and discussed.Based on the different identification mechanisms,the piezoelectric transducer-based technology can be divided into two main approaches as the active or passive sensing and detection methods.This paper summarized the development of these two approaches and discussed their applications in the area of civil structural health monitoring,such as structural and concrete engineering,bridge engineering,pipeline engineering,protection engineering for geological hazards and earthquake disasters,and so on.In addition,the electrical mechanical impedance(EMI)technique,as one of the active identification methods,was also detailly presented.Finally,its great potential for the piezoelectric-based technique was presented based on the detail discussion,especially in the areas of civil structural health monitoring.

Advances in Research on Soil Moisture by Microwave Remote Sensing in China

Soil moisture is an important factor in global hydrologic circulation and plays a significant role in the research of hydrology, climatology, and agriculture. Microwave remote sensing is less limited by climate and time, and can measure in large scale. With these characteristics, this technique becomes an effective tool to measure soil moisture. Since the 1980s, Chinese researchers have investigated the soil moisture using microwave instruments. The active re- mote sensors are characteristic of high spatial resolution, thus with launch of a series of satellites, active microwave remote sensing of soil moisture will be emphasized. The passive microwave remote sensing of soil moisture has a long research history, and its retrieval algorithms were developed well, so it is an important tool to retrieve large scale moisture information from satellite data in the future.

Retrieval of Land-surface Temperature from AMSR2 Data Using a Deep Dynamic Learning Neural Network

It is more difficult to retrieve land surface temperature(LST) from passive microwave remote sensing data than from thermal remote sensing data, because the emissivities in the passive microwave band can change more easily than those in the thermal infrared band. Thus, it is very difficult to build a stable relationship. Passive microwave band emissivities are greatly influenced by the soil moisture, which varies with time. This makes it difficult to develop a general physical algorithm. This paper proposes a method to utilize multiple-satellite, sensors and resolution coupled with a deep dynamic learning neural network to retrieve the land surface temperature from images acquired by the Advanced Microwave Scanning Radiometer 2(AMSR2), a sensor that is similar to the Advanced Microwave Scanning Radiometer Earth Observing System(AMSR-E). The AMSR-E and MODIS sensors are located aboard the Aqua satellite. The MODIS LST product is used as the ground truth data to overcome the difficulties in obtaining large scale land surface temperature data. The mean and standard deviation of the retrieval error are approximately 1.4° and 1.9° when five frequencies(ten channels, 10.7, 18.7, 23.8, 36.5, 89 V/H GHz) are used. This method can effectively eliminate the influences of the soil moisture, roughness, atmosphere and various other factors. An analysis of the application of this method to the retrieval of land surface temperature from AMSR2 data indicates that the method is feasible. The accuracy is approximately 1.8° through a comparison between the retrieval results with ground measurement data from meteorological stations.

Digital phenotyping in depression diagnostics: Integrating psychiatric and engineering perspectives

Depression is a serious medical condition and is a leading cause of disability worldwide.Current depression diagnostics and assessment has significant limitations due to heterogeneity of clinical presentations,lack of objective assessments,and assessments that rely on patients'perceptions,memory,and recall.Digital phenotyping(DP),especially assessments conducted using mobile health technologies,has the potential to greatly improve accuracy of depression diagnostics by generating objectively measurable endophenotypes.DP includes two primary sources of digital data generated using ecological momentary assessments(EMA),assessments conducted in real-time,in subjects'natural environment.This includes active EMA,data that require active input by the subject,and passive EMA or passive sensing,data passively and automatically collected from subjects'personal digital devices.The raw data is then analyzed using machine learning algorithms to identify behavioral patterns that correlate with patients'clinical status.Preliminary investigations have also shown that linguistic and behavioral clues from social media data and data extracted from the electronic medical records can be used to predict depression status.These other sources of data and recent advances in telepsychiatry can further enhance DP of the depressed patients.Success of DP endeavors depends on critical contributions from both psychiatric and engineering disciplines.The current review integrates important perspectives from both disciplines and discusses parameters for successful interdisciplinary collaborations.A clinically-relevant model for incorporating DP in clinical setting is presented.This model,based on investigations conducted by our group,delineates development of a depression prediction system and its integration in clinical setting to enhance depression diagnostics and inform the clinical decision making process.Benefits,challenges,and opportunities pertaining to clinical integration of DP of depression diagnostics are discussed from interdisciplinary perspectives.

Textile-Based Thermoelectric Generators and Their Applications

With the rapid development of Internet of Things and miniaturized electronics, the demand for wearable power sources with high reliability and long duty cycle promotes the exploration of wearable thermoelectric generators(TEGs). In particular, textile-based TEGs that can perpetually convert the ubiquitous temperature gradient between human body and ambience into electrical energy have attracted intensive attention to date.These lightweight and three-dimensional deformable TEGs comprised of fibers, filaments, yarns, or fabrics offer unique merits as wearable power source in comparison with conventional TEGs. In this review, we systematically summarize the state-of-the-art strategies for textile-based TEGs, including the structure design, fabrication, device performance, and application. Existing critical issues and future research emphasis are also discussed.

Historical and real-time estimation of snow depth in Eurasia based on multiple passive microwave data

Current snow depth datasets demonstrate large discrepancies in the spatial pattern in Eurasia,and the lagging updates of datasets do not meet the operational requirements of the meteorological service department.This study developed a dynamic retrieval method for daily snow depth over Eurasia based on cross-sensor calibrated microwave brightness temperatures to enhance retrieval accuracy and meet the requirements of operational work.These brightness temperatures were detected by microwave radiometer imager carried on the FengYun 3(FY-3)satellite and the special sensor microwave imager/sounder carried on the USA Defense Meteorological Satellite Program series satellites,which use the fewest sensors to provide the longest data and consequently introduce minimal errors during inter-sensor calibration.Firstly,inter-sensor calibration was conducted amongst brightness temperatures collected by the three sensors.A spatiotemporal dynamic relationship between snow depth and microwave brightness temperature gradient was then established,overcoming the large uncertainties induced by varying snow characteristics.This relationship can be utilised in FY-3 satellite data for operational service to obtain real-time snow depth.The generated daily snow depth dataset from 1988 to 2021 presents similar spatial patterns of snow depth to those observed in situ.Against in situ snow depth,the overall bias and root mean square error are−2.04 and 6.49 cm,respectively,facilitating considerable improvements in accuracy compared with the Advanced Microwave Scanning Radiometer 2 snow depth product,which adopts the static algorithm.Further analysis shows an overall decreasing trend from 1988 to 2021 for annual and monthly mean snow depths,demonstrating a noticeable reduction since around 2000.The reduction in monthly mean snow depth started earlier in shallow snow months than in deep snow months.

Chlorophyll Fluorescence Detected Passively by Difference Reflectance Spectra of Wheat （Triticum aestivum L.） Leaf

The chlorophyll fluorescence （CF） signature emitted from vegetation provides an abundance of information regarding photosynthetics activity and has been used as a powerful tool to obtain physiological information of plant leaves in a non-invasive manner. CF is difficult to quantify because the CF signal is obscured by reflected light. In the present study, the apparent reflectance spectra of wheat （Triticum aestivum L.） leaves were measured under illuminations with and without filtering by three specially designed long-wave pass edge filters; the cut-off wavelengths of the three filters were 653.8, 678.2, and 694. l nm at 50% of maximum transmittance. The CF spectra could be derived as the reflectance difference spectra of the leaves under illuminations with and without the long wave pass edge filters. The ratio of the reflectance difference at 685 and 740 nm （Dif685/Dif740） was linear correlated with the CF parameters （maximal photochemical efficiency Fv/Fm, and the yield of quantum efficiency） measured by the modulated fluorometer. In addition, the ratio reflected the water stress status of the wheat leaf, which was very high when water deficiency was serious. This method provides a new approach for detecting CF and the physiological state of crops.

Effects of spatial distribution of soil parameters on soil moisture retrieval from passive microwave remote sensing

In this paper,we studied the effect of spatial distribution of soil parameters on passive soil moisture retrieval at pixel scale.First,we evaluated the forward microwave emission model and soil moisture retrieval algorithm accuracy through the observa-tion of field experiments.Then,we used soil parameters in different spatial distribution patterns,including random,normal,and uniform distribution,to determine the different levels of heterogeneity on soil moisture retrieval,in order to seek the rela-tionship between heterogeneity and soil moisture retrieval error.Finally,we conducted a controlled heterogeneity effect ex-periment measurements using a Truck-mounted Multi-frequency Radiometer(TMMR) to validate our simulation results.This work has proved that the soil moisture retrieval algorithm had a high accuracy(RMSE=0.049 cm3 cm 3) and can satisfy the need of this research.The simulation brightness temperatures match well with observations,with RMSE=9.89 K.At passive microwave remote sensing pixel scale,soil parameters with different spatial distribution patterns could have different levels of error on soil moisture estimation.Overall,we found that soil moisture with a random distribution in a satellite pixel scale can cause the largest error,with a normal distribution being the second,and a uniform distribution the least due to the smallest het-erogeneity.

A lake ice phenology dataset for the Northern Hemisphere based on passive microwave remote sensing

Lake ice phenology(LIP)is an essential indicator of climate change and helps with understanding of the regional characteristics of climate change impacts.Ground observation records and remote sensing retrieval products of lake ice phenology are abundant for Europe,North America,and the Tibetan Plateau,but there is a lack of data for inner Eurasia.In this work,enhanced-resolution passive microwave satellite data(PMW)were used to investigate the Northern Hemisphere Lake Ice Phenology(PMW LIP).The Freeze Onset(FO),Complete Ice Cover(CIC),Melt Onset(MO),and Complete Ice Free(CIF)dates were derived for 753 lakes,including 409 lakes for which ice phenology retrievals were available for the period 1978 to 2020 and 344 lakes for which these were available for 2002 to 2020.Verification of the PMW LIP using ground records gave correlation coefficients of 0.93 and 0.84 for CIC and CIF,respectively,and the corresponding values of the RMSE were 11.84 and 10.07 days.The lake ice phenology in this dataset was significantly correlated(P<0.001)with that obtained from Moderate Resolution Imaging Spectroradiometer(MODIS)data-the average correlation coefficient was 0.90 and the average RMSE was 7.87 days.The minimum RMSE was 4.39 days for CIF.The PMW is not affected by the weather or the amount of sunlight and thus provides more reliable data about the freezing and thawing process information than MODIS observations.The PMW LIP dataset pro-vides the basic freeze-thaw data that is required for research into lake ice and the impact of climate change in the cold regions of the Northern Hemisphere.The dataset is available at http://www.doi.org/10.11922/sciencedb.j00076.00081.

A novel fine-resolution snow depth retrieval model to revealdetailed spatiotemporal patterns of snow cover in NortheastChina

Seasonal snow cover is a key component of the global climate and hydrological system,it has drawn considerable attention under global warming conditions.Although several passive microwave(PMW)snow depth(SD)products have been developed since the 1970s,they inherit noticeable errors and uncertainties when representing spatial distributions and temporal changes of SD,especially in complex mountainous regions.In this paper,we developed afine-resolution SD retrieval model(FSDM)using machine learning to improve SD estimation quality for Northeast China and produced a long-term,fine-resolution,daily SD dataset.The accuracies of the FSDM dataset were evaluated against in-situ SD data along with existing SD products.The results showed the FSDM dataset provided satisfactory inversion accuracy in spatiotemporal evaluation,with the root-mean-square error(RMSE),bias,and correlation coefficient(R)of 7.10 cm,-0.13 cm,and 0.60.Additionally,we analyzed the spatiotemporal variations of SD in Northeast China and found that snow cover was mainly distributed in the Greater Khingan Range,Lesser Khingan Mountains,and Changbai Mountain regions.The SD exhibited high-low distribution patterns with the increased latitude.The annual mean SD slightly increased at the rate of 0.029 cm/year during 1987-2018.

A simplified physically-based algorithm for surface soil moisture retrieval using AMSR-E data

A simplified physically-based algorithm for surface soil moisture inversion from satellite microwave radiometer data is presented. The algorithm is based on a radiative transfer model, and the assumption that the optical depth of the vegetation is polarization independent. The algorithm combines the effects of vegetation and roughness into a single parameter. Then the microwave polarization difference index （MPDI） is used to eliminate the effects of surface temperature, and to obtain soil moisture, through a nonlinear iterative procedure. To verify the present algorithm, the 6.9 GHz dual-polarized brightness temperature data from the Advanced Micro- wave Scanning Radiometer （AMSR-E） were used. Then the soil moisture values retrieved by the present algorithm were validated by in-situ data from 20 sites in the Tibetan Plateau, and compared with both the NASA AMSR-E soil moisture products, and Soil Moisture and Ocean Salinity （SMOS） soil moisture products. The results show that the soil moisture retrieved by the present algorithm agrees better with ground measurements than the two satellite products. The advantage of the algorithm is that it doesn＇t require field observations of soil moisture, surface roughness, or canopy biophysical data as calibration parameters, and needs only single-frequency brightness temperature observations during the whole retrieval process.

Daily snow water equivalent product with SMMR,SSM/I and SSMIS from 1980 to 2020 over China

The reliable knowledge of seasonal snow volume and its trend is very important to understand Earth’s climate system.Thus,a long-time snow water equivalent(SWE)dataset is necessary.This work presents a daily SWE product of 1980-2020 with a linear unmixing method through passive microwave data including SMMR,SSM/I and SSMIS over China after cross-calibration and bias-correction.The unbiased root-mean-square error of snow depth is about 5-7 cm,corresponding to 10-15 mm for SWE,when compared with stations measurements and field snow course data.The spatial patterns and trends of SWE over China present significant regional differences.The overall slope trend presented an insignificant decreasing pattern during 1980-2020 over China;however,there is an obvious fluctuation,i.e.a significant decrease trend during the period 1980-1990,an upward trend from 2005 to 2009,a significant downward trend from 2009 to 2018.The increase of SWE occurred in the Northeast Plain,with an increase trend of 0.2 mm per year.Whereas in the Hengduan Mountains,it presented a downward trend of SWE,up to−0.3 mm per year.In the North Xinjiang,SWE has an increasing trend in the Junggar Basin,while it shows a decreasing trend in the Tianshan and Altai Mountains.

Generation of daily snow depth from multi-source satellite images and in situ observations

Snow depth （SD） is a key parameter for research into global climate changes and land surface processes. A method was developed to obtain daily SD images at a higher 4 km spatial resolution and higher precision with SD measurements from in situ observations and passive microwave remote sensing of Advanced Microwave Scanning Radiometer-EOS （AMSR-E） and snow cover measurements of the Interactive Multisensor Snow and Ice Mapping System （IMS）. AMSR-E SD at 25 km spatial resolution was retrieved from AMSR-E products of snow density and snow water equivalent and then corrected using the SD from in situ observations and IMS snow cover. Corrected AMSR-E SD images were then resampled to act as ＂virtual＂ in situ observations to combine with the real in situ observations to interpolate at 4 km spatial resolution SD using the Cressman method. Finally, daily SD data generation for several regions of China demonstrated that the method is well suited to the generation of higher spatial resolution SD data in regions with a lower Digital Elevation Model （DEM） but not so well suited to regions at high altitude and with an undulating terrain, such as the Tibetan Plateau. Analysis of the longer time period SD data generation for January between 2003 and 2010 in northern Xinjiang also demonstrated the feasibility of the method.