Effect of Vibrational Modes on Sand Pressure and Pattern Deformation in the EPC Process

During the EPC (expendable pattern casting) process, one of the essential requirements is to prevent pattern distortion duringsand filling and compaction. A new method which vibrates the system in a two-dimensional circular mode has been appliedto the EPC process. The molding properties of unbonded sand obtained by this new vibration mode are investigated andcompared with those in the one-dimensional vertical mode. For adequate compaction of sand. the circular vibration mode ismore effective than the vertical mode. Sand became more fluidized by the circular vibration and the particle pressure coefficientwas close to unity The particle pressure coefficient, which is defined as the ratio of horizontal to vertical sand pressure, isresponsible for the effectiveness of sand filling.

Anomaly detection on displacement rates and deformation pattern features using tree-based algorithm in Japan and Indonesia

Research on strain anomalies and large earthquakes based on temporal and spatial crustal activities has been rapidly growing due to data availability, especially in Japan and Indonesia. However, many research works used local-scale case studies that focused on a specific earthquake characteristic using knowledgedriven techniques, such as crustal deformation analysis. In this study, a data-driven-based analysis is used to detect anomalies using displacement rates and deformation pattern features extracted from daily global navigation satellite system(GNSS) data using a machine learning algorithm. The GNSS data with188 and 1181 continuously operating reference stations from Indonesia and Japan, respectively, are used to identify the anomaly of recent major earthquakes in the last two decades. Feature displacement rates and deformation patterns are processed in several window times with 2560 experiment scenarios to produce the best detection using tree-based algorithms. Tree-based algorithms with a single estimator(decision tree), ensemble bagging(bagging, random forest and Extra Trees), and ensemble boosting(AdaBoost, gradient boosting, LGBM, and XGB) are applied in the study. The experiment test using realtime scenario GNSSdailydatareveals high F1-scores and accuracy for anomaly detection using slope windowing 365 and 730 days of 91-day displacement rates and then 7-day deformation pattern features in tree-based algorithms. The results show the potential for medium-term anomaly detection using GNSS data without the need for multiple vulnerability assessments.

Deformation patterns and hydrocarbon potential related to intracratonic strike-slip fault systems in the east of Central Uplift Belt in the Tarim Basin

Strike-slip faults,proven to be closely linked to hydrocarbon migration and accumulation,are wide-spread in the Tarim Basin Craton.Deformation patterns in the eastern part of the Central Uplift Belt of the Tarim Basin are analyzed in detail to understand the deformation model and genetic mechanism of strike-slip faults,how their patterns impact reservoir formation and influence oil and gas potential.Regional tectonic events are taken into consideration to identify the primary factors that controlled the development of strike-slip faults in the region.The Tazhong Uplift in the eastern part of Central Uplift Belt is believed to be a complex anticlinal uplift formed by compression-and-torsion acting on the Cambrian-Middle Ordovician platform during the middle-late Caledonian period.Multi-stage development of this north-trending fault-fold belt and the NE-trending strike-slip faults make it structurally complex.The NE-trending Paleozoic strike-slip faults were formed jointly by the differential thrusting of the Tazhong Uplift along Fault No.Ⅰand the NE-trending shear sliding of the basal fault blocks during the middle-late Caledonian-early Hercynian.Based on the distribution of effective source rocks,the tectonic setting during the period critical to hydrocarbon accumulation,and the distribution of conductive faults,the northern slope of the Tazhong Upliftd-especially its west-central part where the NE-trending faults are developed is not only located close to the northern hydrocarbon source rock area but also possesses conditions suitable for the development of carbonate reservoirs.In addition,the NE-trending faults provide passage for initial development of the reservoir and the subsequent migration of oil and gas from the Aman area to the uplifted zone,making the Tazhong Uplift an extremely favorable area for oil and gas accumulation with substantial potential for exploration.

Deformation Pattern and Holocene Slip Rate Along the Fukang Fault in Eastern Tianshan, China

The deformation pattern and Holocene slip rate along the Fukang fault in Eastern Tianshan, China are analyzed and studied using the data obtained in field investigation. The result indicates that the Fukang fault consists of 4 low-angle south-dipping thrust faults with stepover, displaying recent tectonic activity. The movement along the termination parts of the fault is weaker, with an average vertical slip rate of 0 13～0 33 mm/a in Holocene, and along the middle part of the fault is stronger, with an average vertical slip rate larger than 1.42 mm/a in Holocene. The Holocene deformation pattern along the fault displays generally steady slip, multi-phase intermittent movement along its western segment, and persistent movement along its middle and eastern segments, which have caused rapid dislocation up to the surface in an earlier phase.

Deformation Patterns and Shortening Rates in the East Part of the Kalpin Thrust System in the Southwest Tianshan Mountains During the Late Quaternary

Deformation patterns, shortening amounts and rates in the late Quaternary across the Kalpin thrust system have received tittle attention in the past. This paper attempts to discuss them, mainly in the eastern part of the thrust system by doing field investigation along the faults and folds, measuring geomorphic deformation, excavating trenches in several important sites where young alluvial fans were obviously displaced and dating young deposits of alluvial terraces. There are two types of deformation in the surface and near surface for the Kalpin thrust system in the late Quaternary. They are movement of thrust faults on lower angles and bending of young folds. Both kinds of deformation are shown by shortening and uplifting of young geomorphic surfaces. The surface ages of 3 stages are calculated by dating 20 examples using the TL method in the study area and comparing the results of our predecessors on the deposition and incision times of alluvial terraces in the Tianshan mountain which are 100ka B. P., 33 - 18ka B.P. and 6.6 - 8.2ka B.P. respectively for the large-scale deformed alluvial surfaces： T3, T2 and T1 in the Kalpin region. Then, 19 sets of shortening amounts and rates are obtained in 13 sites along 4 rows of anticlines in front of the Kalpin thrust system and Piqiang fold. The shortening amounts and rates show that there are two sections where deformation is stronger than others. The two sections consist of two arcs that are towards the south. The shortening rates near the top of arcs are 1.32mm/a in the west and 1.39mm/a in the east across the thrust system, respectively. In addition, deformation is stronger in the front rows than the rear ones for bifurcate folds.

The Ductile Deformation Characteristics of Caledonian Intracontinental Orogeny in the Northeastern Jiangshan-Shaoxing Tectonic Zone:Insights from Magnetic Fabric Study and Its Geodynamic Implication

The Jiangshan-Shaoxing tectonic zone was the northeastern boundary between the Yangtze Block and the Cathaysia Block during the Neoproterozoic and was an intracontinental orogenic belt during late of the early Paleozoic. In this tectonic zone, there develops a lot of mylonite underwent strong ductile deformation and schist, gneiss, and amphibolite with medium and high grade metamorphism which was formed during the late of early Paleozoic. The research of geometry and kinematic of ductile deformation in Jiangshan-Shaoxing tectonic zone is very important to reveal the tectonic process of intracontinental orogeny. This paper uses the anisotropy of magnetic susceptibility （AMS） to determine the ductile deformation geometry and kinematic of Jiangshan-Shaoxing tectonic zone combing with the field survey. In this study, 190 specimens of 19 locations and 221 specimens of 23 locations from Wangjiazhai section and Lipu-Sizhai section were analyzed. The magnetic foliation over magnetic lineation in both Wangjiazhai and Lipu-Sizhai sections together with the field observations indicated a compressional deformation pattern. 3 and 4 strong ductile deformation zones can be established in the Wangjiazhai section and the Lipu-Sizhai section, respectively. According to the magnetic fabric and petro-fabric studies, the Northeastern Jiangshan-Shaoxing tectonic zone suffered two kinds of deformation patterns during the late early Paleozoic, i.e., the thrusting deformation followed by sinistral shear deformation.

Simultaneous 2D in-plane deformation measurement using electronic speckle pattern interferometry with double phase modulations

Electronic speckle pattern interferometry（ESPI） and digital speckle pattern interferometry are wellestablished non-contact measurement methods. They have been widely used to carry out precise deformation mapping. However, the simultaneous two-dimensional（2D） or three-dimensional（3D） deformation measurements using ESPI with phase shifting usually involve complicated and slow equipment. In this Letter, we solve these issues by proposing a modified ESPI system based on double phase modulations with only one laser and one camera. In-plane normal and shear strains are obtained with good quality. This system can also be developed to measure 3D deformation, and it has the potential to carry out faster measurements with a highspeed camera.

Measurement of out-of-plane deformation of curved objects with digital speckle pattern interferometry

Digital speckle pattern interferometry （DSPI） is a high-precision deformation t technique for planar objects. However, for curved objects, the three-dimensional （3D） shape information is needed in order to obtain correct deformation measurement in DSPI. Thus, combined shape and deformation measurement techniques of DSPI have been proposed. However, the current techniques are either complex in setup or complicated in operation. Furthermore, the operations of some techniques are too slow for real-time measurement. In this work, we propose a DSPI technique for both 3D shape and out-of-plane deformation measurement. Compared with current techniques, the proposed technique is simple in both setup and operation and is capable of fast deformation measurement. Theoretical analysis and experiments are performed. For a cylinder surface with an arch height of 9 mm, the error of out-of-plane deformation measurement is less than 0.15 μm. The effectiveness of the proposed scheme is verified.

地震反射剖面揭示阿尔泰山陆内逆冲造山机制

The Altai orogen is a typical intracontinental orogen in Central Asia that experienced far-field deformation associated with Indian-Eurasian plate convergence. This region is characterized by uplift comparable to that of the Tianshan Mountains but has a distinct strain rate. Half of the Indo-Asia strain is accommodated by the Tianshan Mountains, whereas the Altai Mountains accommodates only 10%. To elucidate how the Altai Mountains produced such a large amount of uplift with only one-fifth of the strain rate of the Tianshan Mountains, we constructed a detailed crustal image of the Altai Mountains based on a new 166.8-km deep seismic reflection profile. The prestack migration images reveal an antiform within the Erqis crust, an ~10 km Moho offset between the Altai arc and the East Junggar area, and a major south-dipping(30° dip) thrust in the lower crust beneath the Altai Mountains, which is connected to the Moho offset. The south-dipping thrust not only records the southward subduction of the Ob-Zaisan Ocean in the Paleozoic but also controlled the Altai deformation pattern in the Cenozoic with the Erqis antiform. The Erqis antiform prevented the extension of deformation to the Junggar crust. The southdipping thrust in the lower crust of the Altai area caused extrusion of the lower crust, generating uplift at the surface, thickening of the crust, and steep(~10 km) Moho deepening in the Altai Mountains. This process significantly widened the deformation zone of the Altai Mountains. These findings provide a new geodynamic model for describing how inherited crustal structure controls intraplate deformation without strong horizontal stress.

Geological risk assessment of traffic engineering construction among 7.0-8.5 magnitude earthquake areas:Practice from the Sichuan-Tibet transport corridor in the eastern Tibetan Plateau

At least 13 active fault zones have developed in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,and there have been undergone 17 MS≥7.0 earthquakes,the largest earthquake is 1950 Chayu MS 8.5 earthquake,which has very strong seismic activity.Therefore,carrying out engineering construction in the Sichuan-Tibet transport corridor is a huge challenge for geological technological personnel.To determining the spatial geometric distribution,activity of active faults and geological safety risk in the Sichuan-Tibet transport corridor.Based on remote sensing images,ground surveys,and chronological tests,as well as the deep geophysical and current GPS data,we investigated the geometry,segmentation,and paleoearthquake history of five major active fault zones in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,namely the Xianshuihe,Litang,Batang,Jiali-Chayu and Lulang-Yigong.The five major fault zones are all Holocene active faults,which contain strike-slip components as well as thrust or normal fault components,and contain multiple branch faults.The Selaha-Kangding segment of the Xianshuihe fault zone,the Maoyaba and Litang segment of the Litang fault zone,the middle segment(Yigong-Tongmai-Bomi)of Jiali-Chayu fault zone and Lulang-Yigong fault zone have the risk of experiencing strong earthquakes in the future,with a high possibility of the occurrence of MS≥7.0 earthquakes.The Jinsha River and the Palong-Zangbu River,which is a high-risk area for geological hazard chain risk in the Ya'an-Linzhi section of the Sichuan-Tibet transport corridor.Construction and safe operation Ya'an-Linzhi section of the Sichuan-Tibet transport corridor,need strengthen analysis the current crustal deformation,stress distribution and fault activity patterns,clarify active faults relationship with large earthquakes,and determine the potential maximum magnitude,epicenters,and risk range.This study provides basic data for understanding the activity,seismicity,and tectonic deformation patterns of the regional faults in the Sichuan-Tibet transport corridor.

Second-order two-scale method for bending behavior analysis of composite plate with 3-D periodic configuration and its approximation

This paper considers the bending behaviors of composite plate with 3-D periodic configuration.A second-order two-scale(SOTS)computational method is designed by means of construction way.First,by 3-D elastic composite plate model,the cell functions which are defined on the reference cell are constructed.Then the effective homogenization parameters of composites are calculated,and the homogenized plate problem on original domain is defined.Based on the Reissner-Mindlin deformation pattern,the homogenization solution is obtained.And then the SOTS’s approximate solution is obtained by the cell functions and the homogenization solution.Second,the approximation of the SOTS’s solution in energy norm is analyzed and the residual of SOTS’s solution for 3-D original in the pointwise sense is investigated.Finally,the procedure of SOTS’s method is given.A set of numerical results are demonstrated for predicting the effective parameters and the displacement and strains of composite plate.It shows that SOTS’s method can capture the 3-D local behaviors caused by3-D micro-structures well.