PSO-DBNet for Peak-to-Average Power Ratio Reduction Using Deep Belief Network

Data transmission through a wireless network has faced various signal problems in the past decades.The orthogonal frequency division multiplexing(OFDM)technique is widely accepted in multiple data transfer patterns at various frequency bands.A recent wireless communication network uses OFDM in longterm evolution(LTE)and 5G,among others.The main problem faced by 5G wireless OFDM is distortion of transmission signals in the network.This transmission loss is called peak-to-average power ratio(PAPR).This wireless signal distortion can be reduced using various techniques.This study uses machine learning-based algorithm to solve the problem of PAPR in 5G wireless communication.Partial transmit sequence(PTS)helps in the fast transfer of data in wireless LTE.PTS is merged with deep belief neural network(DBNet)for the efficient processing of signals in wireless 5G networks.Result indicates that the proposed system outperforms other existing techniques.Therefore,PAPR reduction in OFDM by DBNet is optimized with the help of an evolutionary algorithm called particle swarm optimization.Hence,the specified design supports in improving the proposed PAPR reduction architecture.

REDUCING THE PEAK-TO-AVERAGE POWER RATIO OF OFDM SYSTEM WITH LOW COMPLEXITY

This paper proposes a companding scheme, where small signals are enlarged and large signals are reduced, to reduce the Peak-to-Average Power Ratio(PAPR). Computer simulation results show that the proposed technique has two advantages at least when compared with the conventional methods such as partial transmit sequence, selective mapping and the previous companding. First, it gets better PAPR performances with a lower complexity. Second, the scheme achieves greater performances gain with hardly any damnification of OFDM signals in some degree.

A Novel Peak-to-Average Power Ratio Reduction Scheme via Tone Reservation in OFDM Systems

In this paper, a novel signal-to-clipping noise ratio and least squares approximation tone reservation scheme(SCR-LSA TR) is proposed to reduce the peak-to-average power ratio for orthogonal frequency division multiplexing systems. During the SCR procedure, only the element with the maximal amplitude is picked for processing, which not only decreases the algorithm complexity, but also helps to overcome the BER deterioration. With the LSA method, the amplitude of the peak-cancelling signals can approximate to that of the original clipping noise as much as possible. Through the combination of the optimization factor in the LSA method, the classic SCR method can achieve better PAPR reduction with faster convergence. Simulation results show that the proposed SCR-LSA TR scheme has less in-band distortion and smaller out-of-band spectral radiation. The BER of the proposed scheme shows a better performance especially under the 16-QAM over the additive white Gaussian noise channel.

Reducing Peak-to-Average Power Ratio of a Turbo Coded OFDM

Peak to Average Power Ratio (PAPR) is defined as the instantaneous power (maximum value) to the average power ratio. PAPR is considered to be a major problem in OFDM systems. This problem can cause radical unexpected behavior of the signal fluctuation. This fluctuation is constituted by a large number of power states. The enormous number of these states leads to an additional complexity of ADCs and DACs. This research addresses the previous problem in OFDM systems utilizing Turbo Codes. μLaCP technique is employed for the purpose of decreasing PAPR. Moreover, our OFDM system was simulated in the presence of an AWGN channel with four types of codes (without the presence of ADCs and DACs). These were constituted of PCCC (typical and new), SCCC, and Convolutional Codes. Our Turbo Coded OFDM exhibited unchanged BER performance before and after the use of μLaCP technique. This was accomplished by modifying our previous PAPR reduction technique without sacrificing greatly its attributes.

A correlation OPTS algorithm for reducing peak to average power ratio of FBMC-OQAM systems

A correlation overlapping partial transmit sequence(C-OPTS) algorithm is proposed to solve the issue of high complexity of overlapping partial transmit sequence(OPTS) algorithm in suppressing the peak to average power ratio(PAPR) of filter bank multicarrier-offset quadrature amplitude modulation(FBMC-OQAM) signals.The V subblocks in partial transmit sequence(PTS) are regrouped into U combinations according to the correlation coefficient p,and overlapping subblocks are allowed between adjacent groups.The search starts from the first group and sets the phase factors of the subsequent groups to 1.When the phase factors of the non-overlapping subblocks in the first group are determined,the subsequent groups are searched in turn to determine their respective phase factors.Starting from the second data block,the data overlapped with it should be taken into account when determining its optimal phase factor vector.Theoretical analysis and simulation results indicate that compared with the OPTS algorithm,the proposed algorithm can significantly reduce the computational complexity at the cost of slight deterioration of PAPR performance.Meanwhile,compared with the even-odd iterative double-layers OPTS(ID-OPTS) algorithm,it can further reduce the complexity and obtain a better PAPR suppression effect.

Joint Optimization of Peak-to-Average Power Ratio and Spectral Leakage in 5G Multicarrier Waveforms

High peak-to-average-power ratio(PAPR) and spectral leakage are two main drawbacks of multicarrier systems, such as in orthogonal frequency division multiplexing(OFDM), in future 5G wireless communications. For generating optimized wave forms for 5G communications, this paper proposes an iterative scheme combining time-domain N-continuous OFDM(TD-NC-OFDM) and serial peak cancellation(SPC). Based on the theory of projection onto convex sets(POCS), the effectiveness of the proposed scheme is proved, and the optimized time-frequency domain multicarrier waveforms are analyzed in terms of a balanced tradeoff between out-of-band spectral leakage and PAPR. Both theoretical analysis and simulation results show that the proposed scheme can jointly optimize both the PAPR and out-ofband radiation, with moderate computational complexity.

Simulation on Peak-to-Average Power Ratio for Orthogonal Frequency Division Multiplexing

Clipping is a simple and convenient PAPR （peak-to-average power ratio） reduction method for high speed OFDM （orthogonal frequency division multiplexing） communication system. In this paper, we propose a new PAPR reduction method for Wireless-MAN（metropolitan area network）-OFDM system based on IEEE 802.16, which is over-sampling clipping arithmetic. Simulation and performance of the over-samples clipping＇s PAPR reduction capability, BER effect is given. The simulation indicates that the PAPR of at least 99.9% OFDM symbol is below 6dB after 2 Nyquist rate clipping, and the performance of BER has 1dB SNR（signal noise ratio） loss. The results prove that this method has better capacity to reducing PAPR. So it can be well used in WMAN-OFDM system.

COMPLEMENT BLOCK CODING SCHEME FOR REDUCING PEAK-TO-AVERAGE POWER RATIO OF OFDM SYSTEMS

A new scheme termed as Complement Block Coding (CBC) technique is proposed to reduce the Peak-to-Average Power Ratio (PAPR) of OFDM signals. Utilizing the complement bits which are added to the original information bits,this method can effectively reduce the PAPR of OFDM systems with random frame size N and the coding rate R ≤ (N - k)/N, where kis a positive integer and k ≤ N/2. The performance results obtained with CBC are given and compared with that of some well known schemes, such as Simple Block Coding (SBC), Modified Simple Block Coding (MSBC) and Simple Odd Parity Code (SOPC) for the same purpose. The results show that, at the same coding rate 3/4, the CBC can achieve almost the same performance as SBC, MSBC, but with lower complexity, and that the same performance can be obtained with higher coding rate by using CBC. At the same coding rate (N - 1)/N, the PAPR reduction of CBC is almost the twice as that of SOPC when N ≥ 16. Further more, the PAPR reductions with coding rate (N - 1)/N are almost the same as that with coding rate less than (N - 1)/N,so the proposed scheme CBC is more suitable for the large frame size with high coding rate and can provide error detection.

Peak-to-average power ratio reduction using selective mapping with unequal power distribution

A new approach for peak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM) systems was proposed.This approach is based on assigning powers to the different subcarriers of OFDM using an unequal power distribution strategy.In addition,a reduced complexity selective mapping (RC-SLM) scheme was proposed.The proposed scheme is based on partitioning the frequency domain symbol sequence into several sub-blocks,and then each sub-block is multiplied by different phase sequences whose length is shorter than that used in the conventional SLM scheme.Then,a kind of low complexity conversions is used to replace the IFFT blocks.The performance of the proposed RC-SLM scheme along with the new approach was studied with computer simulation.The obtained results show that the proposed RC-SLM scheme is able to achieve the lowest computational complexity when compared with other low complexity schemes proposed in the literature while at the same time improves the PAPR reduction performance by about 0.3 dB.

A PHASE SCRAMBLING SCHEME FOR SUPPRESSION OF PEAK TO AVERAGE POWER RATIO FOR OFDM

The complex-valued modulating vectors for the subcarriers consist of two kinds of components: One is the information-bearing components superposed with pseudo-randomized phases and the other is the suppression components with specified scrambling phases. The pseudo randomized phases are generated according to the predefined polynomial and mapping function whereas the scrambling phases are from a gradient algorithm. The simulation results verify the rationality and validity of the phase scrambling.

A Low Complexity Linear Moving Average Filtering Technique for PAR Reduction in OFDM Systems

In this paper, a linear moving average recursive filtering technique is proposed to reduce the peak-to-average power ratio (PAR) of orthogonal frequency division multiplexing (OFDM) signals. The proposed low complexity technique is analyzed in an oversampled OFDM system and a simple distribution approximation of the oversampled and linearly filtered OFDM signals is also proposed. Corresponding time domain linear equalizers are developed to recover originally transmitted data symbols. Through extensive computer simulations, effects of the new filtering technique on the oversampled OFDM peak-to-average power ratio (PAR), power spectral density (PSD) and corresponding linear equalizers on the frequency selective Rayleigh fading channel transmission symbol-error-rate (SER) performance are investigated. The newly proposed recursive filtering scheme results in attractive PAR reduction, requires no extra fast Fourier transform/inverse fast Fourier transform (FFT/IFFT) operations, refrains from transmitting any side information, and reduces out-of-band radiation. Also, corresponding linear receivers are shown to perform very close to their frequency domain counterparts.

一种 QAM星座点优化方法及性能分析

正交幅度调制(Quadrature Amplitude Modulation,QAM)是目前无线通信中大量应用的调制技术,其位于4个角的星座点易受链路的影响而导致较高误码率。提出了一种QAM星座点整形优化方法,并对整形优化后的QAM星座点性能进行了计算机仿真分析。以标准星座点为初始值,通过遗传算法逐步迭代,搜索出抗削峰的星座点,从而降低解调误码。仿真结果表明,相比标准QAM,整形优化后的星座点峰均比降低1 dB@1E-6,且在OBO=3.5 dB时有大约0.3 dB@SER=1E-3的解调增益提升。

广义频分复用系统峰均功率比抑制算法

为了降低广义频分复用系统存在着多载波系统中固有的高峰均功率比问题,本文提出了一种适用于广义频分复用系统的子载波抑制高峰均功率比算法。该算法以限幅法为基础,降低了系统的高峰均功率比,但与限幅法不同的是,该算法几乎不会对带外性能及误码率性能造成影响。由于子载波抑制高峰均功率比算法的峰均功率比抑制性能略差于限幅法,因此本文进一步提出将部分序列传输与子载波抑制高峰均功率比结合来进一步抑制系统高峰均功率比的算法。仿真表明:本文提出的算法的高峰均功率比抑制性能与限幅法相同,且不会对系统的带外与误码率性能造成影响。

基于活动性检测动态估计噪声的心音降噪算法

针对基于小波分解和最优改进对数幅度谱估计的心音降噪算法存在噪声残留和心音失真的问题,提出一种基于心音活动性检测(HSAD)动态估计噪声的心音降噪算法。通过设计的HSAD判断当前心音帧是否为基础心音帧(FHS),根据判断结果分别采用改进最小值控制递归平均(IMCRA)算法和递归平滑算法对噪声功率进行动态估计与更新,采用非因果先验信噪比,实现心音信号的降噪。实验结果表明,提出算法能更好在提升降噪性能的同时,降低FHS的失真。

基于数据失真的雷达通信一体化OFDM波形设计方法

正交频分复用(OFDM)波形设计是实现雷达通信一体化的物理层关键技术之一。OFDM波形通常存在峰均功率比(PAPR)高,以及波形自相关旁瓣电平高的问题。该文针对现有联合降低PAPR和自相关旁瓣方法存在的通信速率下降问题,提出了一种基于数据失真的一体化波形设计方法。该文还将通信数据的误差矢量幅度作为优化目标之一,降低了数据失真引起的通信误码率。首先,构建了PAPR约束下最小化积分旁瓣比和误差矢量幅度的优化模型。其次,根据调制星座图特点,通过外围星座调制的数据失真和所有调制数据失真,将多目标高维非凸优化问题转化为两个单目标优化子问题,分别采取凸松弛操作和交替方向乘子法(ADMM)求解简化后的子问题,得到低积分旁瓣比波形和PAPR约束下的低误差矢量幅度波形。仿真结果表明该方法设计的一体化波形可满足PAPR要求,同时具有良好的感知和通信性能。

基于OCDM的通信感知一体化信号PAPR抑制方法

5G技术的不断发展和普及,使得无线设备对频谱资源的需求越来越大,频谱资源紧张的问题日益突出。为了提高频谱利用率,有效解决频谱资源紧张的问题,通信感知一体化(Integrated Sensing and Communication,ISAC)技术应运而生。在ISAC系统中,通信模块和感知模块共用同一波形和硬件平台,从而提高了频谱和设备利用率。其中,基于正交线性调频分频复用(Orthogonal Chirp-Division Multiplexing,OCDM)的ISAC系统对多普勒频移的抗干扰性能更好,性能优于传统系统。但是OCDM信号的平均峰值功率比(Peak to Average Power Ratio,PAPR)较高,这是由于其需要利用离散菲涅尔逆变换(Inverse Discrete Fresnel Transform,IDFn T)进行从chirp域到时域的转换造成的,过高的PAPR容易造成非线性失真,从而对ISAC系统的表现造成影响。针对上述问题,提出了一种基于chirp保留方法的OCDM通感一体化信号PAPR抑制方法,通过将OCDM信号的全部chirp分为两部分,一部分用来传输降低总体PAPR的信号,另一部分则正常传输通信数据,分别称为优化子载波和通信子载波。将一体化信号的PAPR与其非周期自相关函数建立联系,并利用Gerchberge-Saxton算法对优化子载波上的所得信号进行优化,以降低信号整体的PAPR,同时所有子载波均用于雷达信号处理以保证感知性能。仿真结果表明,分别利用10%、25%的子载波用于优化信号PAPR,且互补累积分布函数值为10-2时,可以使一体化信号的PAPR分别降低2 dB、3 dB左右。

基于改进子载波预留算法的正交频分复用信号峰均比抑制方法研究

由于系统对线性元器件的要求非常严格,导致目前正交频分复用(OFDM)系统产生峰值平均功率比(PAPR)过高的问题,引起OFDM和基于OFDM的雷达一体化系统的信号失真,影响系统性能。针对该问题,该文提出了基于加权最小二乘法的子载波预留法(TR)。该算法首先将OFDM设计方案中的子载波分为数据子载波和预留的空白子载波,数据子载波调制数据子载波,空白子载波调制空白数据。然后利用原始数据通过加权最小二乘法得到最佳削峰系数和削峰数据,并将削峰数据调制在空白子载波上面。最后将削峰数据叠加到原始数据上,完成PAPR的抑制。仿真表明,基于加权最小二乘法的TR算法能够在1~3次迭代下实现良好的PAPR抑制效果,并且它的收敛速度相比于传统算法有了明显的提高。

基于电源调制的L波段高性能GaAsHBT功率放大器

介绍了一种基于GaInP/GaAs异质结双极晶体管(HBT)工艺、电源调制的高峰均比、高功率附加效率L波段功率放大器芯片,可满足多载波聚合、大容量通信系统的要求。从器件层面控制基极表面复合、寄生电阻和电容,实现低膝点电压、跨导均匀的晶体管;在电路层面采用自适应偏置电路和谐波调谐等提升线性和功率附加效率。该放大器采用前级驱动加末级输出、驱动比为1∶6的两级晶体管架构和高低通搭配的匹配电路。测试结果表明,在5 V偏置电压下,该功率放大器的饱和输出功率大于35 dBm;在大功率回退时(8 dBm),增益变化小于2 dB,功率附加效率指标达到50%;对于调制带宽为25 kHz的16进制正交振幅调制(16QAM)通信系统,邻道功率比小于-38 dBc@27 dBm。

一种基于小数倍多普勒信道的OTFS信道估计方法

针对现有正交时频空(OTFS)调制系统的信道估计中存在的高峰均比和小数倍多普勒信道下估计困难及复杂度高的问题,提出了一种基于序列导频的匹配滤波(SMF)信道估计方法。该算法首先将序列导频与数据联合成帧,依靠序列的自相关性获取路径数、时延和整数倍多普勒;然后通过互相关匹配滤波估计小数倍的多普勒抽头和信道增益,从而得到信道状态信息;最后根据小数倍信道整数采样的特征,更新信道增益和信道初始相位。仿真结果表明,该方法相比基于嵌入式脉冲导频的信道估计,改善了峰均比,并提高了信道估计性能。相比于传统的序列导频,该方法可以估计得到小数倍多普勒抽头,估计的信道状态信息更准确。该信道估计方法更具有普遍性。

基于分式二次规划的互模糊函数赋形方法

在开展认知雷达波形设计时,由于发射波形与接收滤波器的非匹配体制,互模糊函数赋形相比传统模糊函数赋形优化自由度更高。该文针对强杂波条件下微弱运动目标检测问题,以最大化信干噪比为优化准则,提出了一种联合发射相位编码序列与接收滤波器设计的互模糊函数赋形方法。在恒模约束下,优化问题被建模为二次分式规划形式;然后通过引入辅助变量,并利用共轭梯度法求解Stiefel流形空间上的最小化问题,非凸优化据此转化为恒模约束二次优化问题;通过交替循环和类幂迭代算法求得最优解。此外考虑到发射波形受硬件限制而难以实现严格恒模,该文构建了一种低峰均比约束二次优化问题模型,并利用最近邻向量法求得最优解。最后,不同参数下的仿真与实测数据实验表明,该文赋形方法相较于传统方法具有较高的信干噪比增益和收敛速度。