Optimization of the Pretreatment of the Mixture of Cassava Peelings and Pineapple Fibers Using Response Surface Methodology and a Process Simulator for the Bioethanol Production

The increase in oil prices and greenhouse gas emissions has led to the search for substitutes for fossil fuels. In Cameroon, the abundance of lignocellulosic resources is inherent to agricultural activity. Production of bioethanol remains a challenge given the crystallinity of cellulose and the presence of the complex. The pretreatment aimed to solubilize the lignin fraction and to make cellulose more accessible to the hydrolytic enzymes, was done using the organosolv process. A mathematical modeling was performed to point out the effect of the temperature on the kinetics of the release of the reducing sugars during the pretreatment. Two mathematical model was used, SAEMAN’s model and Response surface methodology. The first show that the kinetic parameters of the hydrolysis of the cellulose and reducing sugar are: 0.05089 min-1, 5358.1461 J·mol-1, 1383.03691 min-1, 51577.6100 J·mol-1 respectively. The second model was used. Temperature is the factor having the most positive influence whereas, ethanol concentration is not an essential factor. To release the maximum, an organosolv pre-treatment of this sub-strate should be carried out at 209.08°C for 47.60 min with an ethanol-water ratio of 24.02%. Organosolv pre-treatment is an effective process for delignification of the lignocellulosic structure.

THE GLOBAL LIPSCHITZ SOLUTION FOR A PEELING MODEL

This paper focusses on a peeling phenomenon governed by a nonlinear wave equation with a free boundary.Under the hypotheses that the total variation of the intial data and the boundary data are small,the global existence of a weak solution to the nonlinear problem(1.1)-(1.3)is proven by a modified Glimm scheme.The regularity of the peeling front is established,and the asymptotic behaviour of the obtained solution and the peeling front at infinity is also studied.

Peeling与韦登斯基现象

在房室超常传导受到普遍怀疑之后,韦登斯基现象往往被认为是真正的房室超常传导。这一认识是否符合实验和临床电生理研究的结果?本文作一客观的讨论。韦登斯基现象回顾 1986年韦登斯基在神经—肌肉标本上发现,对神经作阈下刺激,肌肉无反应。然而对神经作强刺激引起肌肉收缩后,原来的阈下刺激此时也能引起肌肉收缩,即所谓韦登斯基效应(Wedensky effect)。

Investigation on the roles of equilibrium toroidal rotation during edge-localized mode mitigated by resonant magnetic perturbations

The effects of equilibrium toroidal rotation during edge-localized mode(ELM)mitigated by resonant magnetic perturbation(RMP)are studied with the experimental equilibria of the EAST tokamak based on the four-field model in the BOUT++code.As the two main parameters to determine the toroidal rotation profiles,the rotation shear and magnitudes were separately scanned to investigate their roles in the impact of RMPs on peeling-ballooning(P-B)modes.On one hand,the results show that strong toroidal rotation shear is favorable for the enhancement of the self-generated E×B shearing rate<ω_(E×B)>with RMPs,leading to significant ELM mitigation with RMP in the stronger toroidal rotation shear region.On the other hand,toroidal rotation magnitudes may affect ELM mitigation by changing the penetration of the RMPs,more precisely the resonant components.RMPs can lead to a reduction in the pedestal energy loss by enhancing the multimode coupling in the turbulence transport phase.The shielding effects on RMPs increase with the toroidal rotation magnitude,leading to the enhancement of the multimode coupling with RMPs to be significantly weakened.Hence,the reduction in pedestal energy loss by RMPs decreased with the rotation magnitude.In brief,the results show that toroidal rotation plays a dual role in ELM mitigation with RMP by changing the shielding effects of plasma by rotation magnitude and affecting<ω_(E×B)>by rotation shear.In the high toroidal rotation region,toroidal rotation shear is usually strong and hence plays a dominant role in the influence of RMP on P-B modes,whereas in the low rotation region,toroidal rotation shear is weak and has negligible impact on P-B modes,and the rotation magnitude plays a dominant role in the influence of RMPs on the P-B modes by changing the field penetration.Therefore,the dual role of toroidal rotation leads to stronger ELM mitigation with RMP,which may be achieved both in the low toroidal rotation region and the relatively high rotation region that has strong rotational shear.

Retinal displacement after surgery for idiopathic macular hole

AIM:To review and summarize the mechanism hypothesis,influencing factors and possible consequences of macular retinal displacement after idiopathic macular hole(IMH)surgery.METHODS:PubMed and Web of Science database was searched for studies published before April 2023 on“Retinal displacement”,“Idiopathic macular holes”,and“Macular displacement”.RESULTS:Recently,more academics have begun to focus on retinal displacement following idiopathic macular holes.They found that internal limiting membrane(ILM)peeling was the main cause of inducing postoperative position shift in the macular region.Moreover,several studies have revealed that the macular hole itself,as well as ILM peeling method,will have an impact on the result.In addition,this phenomenon is related to postoperative changes in macular retinal thickness,cone outer segment tips line recovery,the occurrence of dissociated optic nerve fiber layer(DONFL)and the degree of metamorphopsia.CONCLUSION:As a subclinical phenomenon,the clinical significance of postoperative macular displacement cannot be underestimated as it may affect the recovery of anatomy and function.

Resistance index and browning mechanism of apple peel under high temperature stress

Apples are one of the most important economic crops worldwide.Because of global warming and an aggravation of environmental,abnormally high temperatures occur frequently in fruit-growing season and seriously affect normal fruit growth and reduce fruit quality and yield.We took five-year-old Ruixue’(Qinfu 1×Pink Lady;CNA20151469.1) fruits as test materials,and the ambient temperature during fruit development was monitored.The results showed that during the fruit-growing season,especially during the rapid growth stage (July to August),the maximum daily temperature exceeded 30℃ and lasted for more than 40 days.To determine the effects of high temperature stress on the apple fruit resistance,we treated expanding,veraison,and maturity-period fruits at different temperatures.It was found that the fruits of the expanding period showed strong resistance to high temperature stress,whereas during veraison and maturity,fruit resistance to high temperature stress decreased,and the fruit peel browning phenotype appeared.Meanwhile,the content of malonaldehyde (MDA),hydrogen peroxide (H_(2)O_(2)),and superoxide anion (O._(2)^(-)) in the peel gradually increased with increasing temperature.The content of total phenols,flavanol,and flavonoids in the peel decreased substantially at 45℃.Moreover,it was found that polyphenol oxidase gene (MdPPO1) was most sensitive to high temperature stress in apple.Furthermore,transient and stable MdPPO1 overexpression significantly promoted peel browning.The transgenic materials were more sensitive to high temperatures,and browning was more severe compared to non-genetically modified organism (WT).Stable MdPPO1 knockout calli obtained via clustered regularly interspersed short palindromic repeats (CRISPR/Cas9) gene knockout technology reduced the browning phenotype,and the resultant fruits were not sensitive to the effects of high temperature stress.Thus,MdPPO1 expression may be a key factor of high temperature-related changes observed in the browning phenotype that provides a scientific theoretical basis for the selection of high temperature-resistant varieties and apple cultivation and management in the future.

Green Synthesis of Silver Nanoparticles Using Aqueous Orange and Lemon Peel Extract and Evaluation of Their Antimicrobial Properties

Green synthesis of silver nanoparticles (AgNPs) using aqueous extracts of orange and lemon peels, as a reducing agent, and silver nitrate salts as a source of silver ions is a promising field of research due to the versatility of biomedical applications of metal nanoparticles. In this paper, AgNPs were synthetized at different reaction parameters such as the type and concentration of the extracts, metal salt concentration, temperature, speed stirring, and pH. The antibacterial properties of the obtained silver nanoparticles against E. coli, as well as the physical and chemical characteristics of the synthesized silver nanoparticles, were investigated. UV-Vis spectroscopy was used to confirm the formation of AgNPs. In addition to green biogenic synthesis, chemical synthesis of silver nanoparticles was also carried out. The optimal temperature for extraction was 65˚C, while for the synthesis of AgNPs was 35˚C. The synthesis is carried out in an acidic environment (pH = 4.7 orange and pH = 3.8 lemon), neutral (pH = 7) and alkaline (pH = 10), then for different concentrations of silver nitrate solution (0.5 mM - 1 mM), optimal time duration of the reaction was 60 min and optimal stirring speed rotation was 250 rpm on the magnetic stirrer. The physical properties of the synthesized silver nanoparticles (conductivity, density and refractive index) were also studied, and the passage of laser light through the obtained solution and distilled water was compared. Positive inhibitory effect on the growth of new Escherichia coli colonies have shown AgNPs synthesized at a basic pH value and at a 0.1 mM AgNO3 using orange or lemon peel extract, while for a 0.5 mM AgNO3 using lemon peel extract.

Extraction, Production and Quality Evaluation of Margarine from Oil Extracted from Waste Biomass Peels of Avocado and Virgin Coconut Oil, Using Chitosan from Reared Shells as Preservative

The production and consumption of avocado pears generates tons of wastes, mainly the pear peels which are usually discarded, although they have been reported to contain important phyto-chemicals with biological activities. The adverse health effect associated with the consumption of saturated lipid based foods has ignited research on reformulation of lipid based foods to eliminate Trans Fatty Acids (TFAs). This study was thus aimed at the extraction and characterization of oil from Avocado Peels (APO) and evaluation of the quality of margarine produced from it. Five verities of pear were used for oil extraction by soxhlet method and physiochemical, oxidative, functional and antioxidant characterization was done. Margarines were formulated using a central composite design using oil blends of APO and Virgin Coconut Oil (VCO) with an oil ratio of 10:90, 40:60, 70:30 respectively, varied blending speed, blending time, and chitosan concentration. Samples were characterized and the effect of process parameters on the physiochemical and functional properties of the margarine studied. Optimized conditions were used to produce samples for sensory evaluation. Color, spreadability, aroma, taste and general acceptability was evaluated using ranking difference test. The results showed that the yield, density, and iodine values of APOs oils ranged from 14.91 ± 0.18 to 11.76 ± 0.46;0.93 ± 0.001 to 0.99 ± 0.1;46.63 ± 1.70 to 52.4 ± 0.63, their acid values, TBA and PV values ranged from 1.42 ± 0.39 to 1.97 ± 0.5;0.11 ± 0.002 to 0.18 ± 0.04;and 2.72 ± 0.14 to 4.43 ± 0.36 respectively, with Brogdon avocado peel variety having the overall best properties prepared blends of trans-free APO margarines showed that increase in APO ratio decreased melting point, increased oxidative stability and reduced moisture content of margarine samples. Chitosan addition leads to decrease moisture content and increase functional properties. VCO lead to increase in phenolic and flavonoid content of the margarines. Samples were spreadable and palatable with R20 being most palatable and the most accepted being R26 with a mean score of 7.07 ± 0.70. Decrease in color intensity increased acceptability. This study therefore demonstrated that avocado peel waste biomass can be valorized by using it as raw material for oil extraction, which can serve as good material for the production of trans-free margarines with good oxidative stability, functional and antioxidant properties.

FINITE ELEMENT ANALYSIS ABOUT STRESS AND STRAIN OF SURFACE PEELING IN Cu-Fe-P SHEET

The microstructure of surface peeling in finish rolled Cu-0.1Fe-0.03P sheetis analyzed by scanning electron microscope and energy dispersive spectroscope. Fe-rich areas ofdifferent contents are observed in the matrix. The stress distributions and strain characteristicsat the interface between Cu matrix and Fe particle are studied by elastic-plastic finite elementplane strain model. Larger Fe particles and higher deforming extent of finish rolling are attributedto the intense stress gradient and significant non-homogeneity equivalent strain at the interfaceand accelerate surface peeling of Cu-0.1Fe-0.03P lead frame sheet.

Molecular dynamics simulation of peeling a DNA molecule on substrate

Molecular dynamics （MD） simulations are performed to study adhesion and peeling of a short fragment of single strand DNA （ssDNA） molecule from a graphite surface. The critical peel-off force is found to depend on both the peeling angle and the elasticity of ssDNA. For the short ssDNA strand under investigation, we show that the simulation results can be explained by a continuum model of an adhesive elastic band on substrate. The analysis suggests that it is often the peak value, rather than the mean value, of adhesion energy which determines the peeling of a nanoscale material.

FAILURE ANALYSIS OF PEELING PROCESS FOR TITANIUM ANODES COATINGS

ＦＡＩＬＵＲＥＡＮＡＬＹＳＩＳＯＦＰＥＥＬＩＮＧＰＲＯＣＥＳＳＦＯＲＴＩＴＡＮＩＵＭＡＮＯＤＥＳＣＯＡＴＩＮＧＳＴａｎｇＤｉａｎ；ＣｈｅｎＳｈｉｒｅｎ（ＩｎｓｔｉｔｕｔｅｆｏｒＭａｔｅｒｉａｌｓＲｅｓｅａｒｃｈ，ＦｕｚｈｏｕＵｎｉｖｅｒｓｉｔｙ，Ｆｕ...

Internal limiting membrane peeling with different dyes in the surgery of idiopathic macular hole: a systematic review of literature and network Meta-analysis

AIM: To evaluate the effect of internal limiting membrane(ILM) peeling with indocyanine green(ICG), brilliant blue G(BBG), triamcinolone acetonide(TA), trypan blue(TB), or without dye for the treatment of idiopathic macular hole(IMH). METHODS: A search was conducted using Pub Med, EMBASE, and CENTRAL(Cochrane Central Register of Controlled Trials) for related studies published before October 2018. RESULTS: A total of 29 studies and 2514 eyes were included in this network Meta-analysis. For IMH closure, the rank from the best to the worse treatment was: BBG, TB, TA, ICG, and no dye. There was a significant difference in postoperative IMH closure rate between BBG and no dye. The rank of the best to the worse treatment to improve visual acuity was: BBG, TB, no dye, TA, and ICG. The improvement rate of visual acuity after using BBG was significantly higher than ICG. The improvement rate of visual acuity was more favorable with TB than ICG, TA, and no dye. CONCLUSION: BBG can contribute to better anatomical and functional outcomes compared to other dyes for ILM peeling in patients with IMH. The results show that the best treatment of ILM peeling with dyes is BBG.

Displacement of the retina after idiopathic macular hole surgery with different internal limiting membrane peeling patterns

AIM:To explore retinal displacement after surgical treatment for idiopathic macular hole(IMH)with different internal limiting membrane(ILM)peeling patterns.METHODS:Totally 22 eyes from 20 patients with IMH were randomly allocated into two groups,N-T group(11 eyes)and T-N group(11 eyes).For patients in N-T group,ILM was peeled off from nasal to temporal retina.For patients in T-N group,ILM was peeled off from temporal to nasal retina.Preoperative,postoperative 1,3,and 6 mo,autofluorescence fundus images were collected for manual measurement of distances of fixed nasal(N),temporal(T),superior(S),and inferior(I)retinal points(bifurcation or crossing of retinal vessels)around the macula to the optic disc(OD).These were respectively defined as N-OD,T-OD,S-OD,and I-OD.The retinal displacement,macular holeclosure rate,and best corrected visual acuity(BCVA)were compared between the two groups after surgery.RESULTS:At postoperative 1,3,and 6 mo,the macula slipped toward the OD,manifested by the decreased T-OD,N-OD,S-OD,and I-OD(P<0.05).No significant difference was found in the T-OD,N-OD,S-OD,and I-OD between N-T group and T-N group.IMH closure rate was 100%both in N-T group and T-N group.There was no significant difference in BCVA between two groups(P<0.05).CONCLUSION:The macula slips toward the OD after successful macular hole surgery.The two different ILM peeling pattern show similar visual outcome and retinal displacement,which means ILM peeling directions are not the influencing factor of postoperative retinal displacement.

Effect of Fe Particle on the Surface Peeling in Cu-Fe-P Lead Frame

Under the surface peeling of Cu- Fe- P lead frame alloy larger Fe particles were observed by energy dispersive spectroscopy. By using the large strain two-dinension plane strain model and elastic plastic finite element method, the cause for peeling damage of Cu-Fe-P lead frame aUoy was investigated. The results show that when the content of Fe particles is more than 30% at local Fe-rich area the intense stress coacentration in the Fe particle would make the Fe particle broken up. The high equivalent stress mutation and the mismatch of equivalent strain 10% at the two sides of intefrace make it easy to develop the crack and peeling damage on finish rolling. The larger Fe particles in the Cu-Fe-P alloy should be avoided.

Loop Peeling Based on Quasi-Invariance/Induction Variables

Loop optimization plays an important role in compiler optimization and program transformation. Many sophisticated techniques such as loop invariance code motion have been developed. Loop peeling is a technique to assist parallelization of loops by unfolding loops a few times. This paper introduces a novel technique called loop peeling based on quasi invariance/induction variables. It aims at finding a general and automatic method to derive how many times a given loop should be peeled. Our technique allows for a number of iterations before some variables assigned inside a given loop become invariance or induction variables. In this paper we define the notion of quasi invariance/induction variables, present an algorithm for statically computing the optimal peeling length of a given loop. Our technique can increase the accuracy of program analyses, improve the effectiveness of loop peeling and is well suited as supporting other optimization techniques in the context of supercomputers.

Formulations Containing Curcumin or Trans-Resveratrol Increase Dermal Thickness in Rats Submitted to Chemical Peeling

Plant-derived substances such as curcumin and trans-resveratrol, both of which have anti-inflammatory properties, may have a beneficial effect on human skin. The present study analyzed the effects of topical formulations containing curcumin or trans-resveratrol on the recovery and rejuvenation of skin after chemical peeling. The study was performed on rats, randomly divided into seven groups of six animals each. Superficial peeling was performed using a 50% glycolic acid gel, which was applied to the dorsal region of each animal. Rats were then treated with the experimental formulations for 15 days. On the sixteenth day, skin samples were taken and mounted on slides for histological analysis. Statistical analysis showed that the formulation containing trans-resveratrol led to increased dermal and epidermal thickness, while the formulation containing curcumin had no effects on epidermal thickness. The increased epidermal thickness may reflect greater skin vitality, although this was not directly evaluated. The increase in dermal thickness may be attributed to greater collagen production, which may increase skin firmness and elasticity, and lead to skin rejuvenation as well as wrinkle reduction. Formulations containing curcumin or trans-resveratrol may have potential for the topical treatment after peeling and of sensitive skin, in addition to being used for their antiaging properties.