采用异佛尔酮二异氰酸酯(IPDI)、聚醚硅氧烷二元醇(WACKER IM 22、IM15)/聚酯二元醇(7112)混合软段、二羟甲基丙酸(DMPA)/聚乙二醇(PEG600)混合亲水基(扩链剂)、季戊四醇三丙烯酸酯(PETA)等原料合成多官能度的综合改性UV固化水性聚氨酯...采用异佛尔酮二异氰酸酯(IPDI)、聚醚硅氧烷二元醇(WACKER IM 22、IM15)/聚酯二元醇(7112)混合软段、二羟甲基丙酸(DMPA)/聚乙二醇(PEG600)混合亲水基(扩链剂)、季戊四醇三丙烯酸酯(PETA)等原料合成多官能度的综合改性UV固化水性聚氨酯丙烯酸酯(WPUA);实验结果表明:采用阴/非离子混合型亲水基能提高WPUA产品稳定性,改性产品固化后膜的耐水性、耐碱性、耐溶剂性能明显提高,综合性能优良。展开更多
To improve the flame-retardant efficiency and water resistance of ammonium polyphosphate（APP）, the UV-curable pentaerythritol triacrylate（PETA） was used to microencapsulate APP via the UV curing polymerization met...To improve the flame-retardant efficiency and water resistance of ammonium polyphosphate（APP）, the UV-curable pentaerythritol triacrylate（PETA） was used to microencapsulate APP via the UV curing polymerization method. The prepared PETA-microencapsulated APP（PETA-APP） was characterized by Fourier transform infrared spectroscopy（FTIR）, scanning electron microscopy（SEM）, and thermogravimetric（TG） analysis. PETA-APP was used as intumescent flame retardant（IFR） alone to flame retard polypropylene（PP）. The water resistance of PP/PETA-APP composites was investigated, and the effect of PETA on the combustion behaviors of PP/APP composites was studied through limiting oxygen index（LOI）, vertical burning test（UL-94） and cone calorimeter（CC） test, respectively. With 40 wt% of PETA-APP, the PP/PETA-APP system could achieve a LOI value of 30.0% and UL-94 V-0 rating after treatment in hot water for 168 h, while the LOI value of the system containing 40 wt% uncoated APP was only 19.2%, and it failed to pass the UL-94 rating. CC test results showed that the heat release rate（HRR）, mass loss rate（MLR） and smoke production rate（SPR） of PP/PETAAPP system decreased significantly compared with PP/APP system, especially the peak of HRR was decreased by 51.4%. The mechanism for the improvement of flame reatardancy for PP/PETA-APP composites was discussed based on FTIR and X-ray photoelectron spectroscopy（XPS） tests. All these results illustrated that simultaneous improvement of flame retardancy and water resistance for PP/APP was achieved through coating UV-curable PETA onto APP.展开更多
Pentaerythritol triacrylate （PETA） was successfully grafted onto the plasma-treated isotactic polypropylene （iPP） via the in situ melt processing. The X-ray photoelectron spectroscopy （XPS） results showed that t...Pentaerythritol triacrylate （PETA） was successfully grafted onto the plasma-treated isotactic polypropylene （iPP） via the in situ melt processing. The X-ray photoelectron spectroscopy （XPS） results showed that the hydroxyl and carbonyl groups, and peroxides could be generated via plasma treatment. The content of free radical in plasma-treated iPP （PiPP） was measured by 2,2-diphenyl-1- picrylhydrazyl （DPPH）. It was found that the resulting peroxides induced the grafting copolymerization of PETA onto iPP, and the grafted PETA promoted the formation of β-crystal in PiPP, which was evidenced by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimetry （DSC） and wide-angle X-ray diffraction （WAXD） measurements, respectively.展开更多
文摘采用异佛尔酮二异氰酸酯(IPDI)、聚醚硅氧烷二元醇(WACKER IM 22、IM15)/聚酯二元醇(7112)混合软段、二羟甲基丙酸(DMPA)/聚乙二醇(PEG600)混合亲水基(扩链剂)、季戊四醇三丙烯酸酯(PETA)等原料合成多官能度的综合改性UV固化水性聚氨酯丙烯酸酯(WPUA);实验结果表明:采用阴/非离子混合型亲水基能提高WPUA产品稳定性,改性产品固化后膜的耐水性、耐碱性、耐溶剂性能明显提高,综合性能优良。
基金financially supported by the National Natural Science Foundation of China(Nos.50933005,51121001)the Program for Changjiang Scholars and Innovative Research Team in Universities(IRT1026)
文摘To improve the flame-retardant efficiency and water resistance of ammonium polyphosphate（APP）, the UV-curable pentaerythritol triacrylate（PETA） was used to microencapsulate APP via the UV curing polymerization method. The prepared PETA-microencapsulated APP（PETA-APP） was characterized by Fourier transform infrared spectroscopy（FTIR）, scanning electron microscopy（SEM）, and thermogravimetric（TG） analysis. PETA-APP was used as intumescent flame retardant（IFR） alone to flame retard polypropylene（PP）. The water resistance of PP/PETA-APP composites was investigated, and the effect of PETA on the combustion behaviors of PP/APP composites was studied through limiting oxygen index（LOI）, vertical burning test（UL-94） and cone calorimeter（CC） test, respectively. With 40 wt% of PETA-APP, the PP/PETA-APP system could achieve a LOI value of 30.0% and UL-94 V-0 rating after treatment in hot water for 168 h, while the LOI value of the system containing 40 wt% uncoated APP was only 19.2%, and it failed to pass the UL-94 rating. CC test results showed that the heat release rate（HRR）, mass loss rate（MLR） and smoke production rate（SPR） of PP/PETAAPP system decreased significantly compared with PP/APP system, especially the peak of HRR was decreased by 51.4%. The mechanism for the improvement of flame reatardancy for PP/PETA-APP composites was discussed based on FTIR and X-ray photoelectron spectroscopy（XPS） tests. All these results illustrated that simultaneous improvement of flame retardancy and water resistance for PP/APP was achieved through coating UV-curable PETA onto APP.
基金financially supported by the National Natural Science Foundation of China (No.51473113)the Natural Science Foundation of Tianjin (No.12JCYBJC11900)
文摘Pentaerythritol triacrylate （PETA） was successfully grafted onto the plasma-treated isotactic polypropylene （iPP） via the in situ melt processing. The X-ray photoelectron spectroscopy （XPS） results showed that the hydroxyl and carbonyl groups, and peroxides could be generated via plasma treatment. The content of free radical in plasma-treated iPP （PiPP） was measured by 2,2-diphenyl-1- picrylhydrazyl （DPPH）. It was found that the resulting peroxides induced the grafting copolymerization of PETA onto iPP, and the grafted PETA promoted the formation of β-crystal in PiPP, which was evidenced by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimetry （DSC） and wide-angle X-ray diffraction （WAXD） measurements, respectively.
