Micro segment analysis of supercritical methane thermal-hydraulic performance and pseudo-boiling in a PCHE straight channel

The printed circuit heat exchanger(PCHE) is receiving wide attention as a new kind of compact heat exchanger and is considered as a promising vaporizer in the LNG process. In this paper, a PCHE straight channel in the length of 500 mm is established, with a semicircular cross section in a diameter of 1.2 mm.Numerical simulation is employed to investigate the flow and heat transfer performance of supercritical methane in the channel. The pseudo-boiling theory is adopted and the liquid-like, two-phase-like, and vapor-like regimes are divided for supercritical methane to analyze the heat transfer and flow features.The results are presented in micro segment to show the local convective heat transfer coefficient and pressure drop. It shows that the convective heat transfer coefficient in segments along the channel has a significant peak feature near the pseudo-critical point and a heat transfer deterioration when the average fluid temperature in the segment is higher than the pseudo-critical point. The reason is explained with the generation of vapor-like film near the channel wall that the peak feature related to a nucleateboiling-like state and heat transfer deterioration related to a film-boiling-like state. The effects of parameters, including mass flow rate, pressure, and wall heat flux on flow and heat transfer were analyzed.In calculating of the averaged heat transfer coefficient of the whole channel, the traditional method shows significant deviation and the micro segment weighted average method is adopted. The pressure drop can mainly be affected by the mass flux and pressure and little affected by the wall heat flux. The peak of the convective heat transfer coefficient can only form at high mass flux, low wall heat flux, and near critical pressure, in which condition the nucleate-boiling-like state is easier to appear. Moreover,heat transfer deterioration will always appear, since the supercritical flow will finally develop into a filmboiling-like state. So heat transfer deterioration should be taken seriously in the design and safe operation of vaporizer PCHE. The study of this work clarified the local heat transfer and flow feature of supercritical methane in microchannel and contributed to the deep understanding of supercritical methane flow of the vaporization process in PCHE.

Effect of silica fume and glass powder for enhanced impact resistance in GGBFS-based ultra high-performance geopolymer fibrous concrete:An experimental and statistical analysis

Solid waste recycling is an economically sound strategy for preserving the environment,safeguarding natural resources,and diminishing the reliance on raw material consumption.Geopolymer technology offers a significant advantage by enabling the reuse and recycling of diverse materials.This research assesses how including silica fume and glass powder enhances the impact resistance of ultra-high-performance geopolymer concrete(UHPGC).In total,18 distinct mixtures were formulated by substituting ground granulated blast furnace slag with varying proportions of silica fume and glass powder,ranging from 10%to 40%.Similarly,for each of the mixtures above,steel fibre was added at a dosage of 1.5%to address the inherent brittleness of UHPGC.The mixtures were activated by combining sodium hydroxide and sodium silicate solution to generate geopolymer binders.The specimens were subjected to drop-weight impact testing,wherein an examination was carried out to evaluate various parameters,including flowability,density at fresh and hardened state,compressive strength,impact numbers indicative of cracking and failure occurrences,ductility index,and analysis of failure modes.Additionally,the variations in the impact test outcomes were analyzed using the Weibull distribution,and the findings corresponding to survival probability were offered.Furthermore,the microstructure of UHPGC was scrutinized through scanning electron microscopy.Findings reveal that the specimens incorporating glass powder exhibited lower cracking impact number values than those utilizing silica fume,with reductions ranging from 18.63%to 34.31%.Similarly,failure impact number values decreased from 8.26%to 28.46%across glass powder contents.The maximum compressive and impact strength was recorded in UHPGC,comprising 10%silica fume with fibres.

Configuration Synthesis and Grasping Performance Analysis of Multi-Loop Coupling Capture Mechanism for Launch and Recovery of Torpedo-Shaped Autonomous Underwater Vehicle

Research of capture mechanisms with strong capture adaptability and stable grasp is important to solve the problem of launch and recovery of torpedo-shaped autonomous underwater vehicles(AUVs).A multi-loop coupling capture mechanism with strong adaptability and high retraction rate has been proposed for the launch and recovery of torpedo-shaped AUVs with different morphological features.Firstly,the principle of capturing motion retraction is described based on the appearance characteristics of torpedo-shaped AUVs,and the configuration synthesis of the capture mechanism is carried out using the method of constrained chain synthesis.Secondly,the screw theory is employed to analyze the degree of freedom(DoF)of the capture mechanism.Then,the 3D model of the capture mechanism is established,and the kinematics and dynamics simulations are carried out.Combined with the capture orientation requirements of the capture mechanism,the statics and vibration characteristics analyses are carried out.Furthermore,considering the capture process and the underwater working environment,the motion characteristics and hydraulics characteristics of the capture mechanism are analyzed.Finally,a principle prototype is developed and the torpedo-shaped AUVs capture experiment is completed.The work provides technical reserves for the research and development of AUV capture special equipment.

Item-Level Analysis of the Revised Occupational Therapy Fieldwork Performance Evaluation Applied in Practice

Competency-based assessments for healthcare professionals are critical for safe and effective client outcomes. Rehabilitation clinical skill competency assessments must be validated and revised to produce safe and skilled practitioners. The revised American Occupational Therapy Association (AOTA) Fieldwork Performance Evaluation (FWPE) instrument measures occupational therapy student performance to determine readiness for practice. The assessment includes thirty-seven competencies that address both profession specific clinical skills and general professional behavior skills. The objective of this study was to use Rasch methods to explore the use of the revised FWPE in actual fieldwork practice and to determine the instrument’s psychometric properties when separating the item components into two distinct subdomains: General Health Professions Competences and Occupational Therapy-Specific Competencies. Internal construct validity and test reliability were analyzed using data from 149 occupational therapy students after completing their initial Level II A fieldwork clinical internship. This study examined the item difficulty hierarchy, item fit, person-fit to model, person separation index, person separation reliability coefficient, strata, ceiling and floor effect, and unidimensionality of the FWPE instrument as a whole and as two separate domains. With the exception of not meeting the criteria for unidimensionality, the full FWPE instrument and the Occupational Therapy-Specific Competencies subdomain showed acceptable item-level psychometrics for reliability and precision. While the General Health Professions Competencies subdomain showed good item-level psychometrics, it was below the criterion for reliability and only separated the sample into two strata. Results support the validity, reliability, and clinical use of the revised FWPE full instrument and the Occupational Therapy-Specific Competencies subdomain to measure entry-level clinical skill competencies in practice.

Python Server Page Performance Analysis and Modeling

Today, in the field of computer networks, new services have been developed on the Internet or intranets, including the mail server, database management, sounds, videos and the web server itself Apache. The number of solutions for this server is therefore growing continuously, these services are becoming more and more complex and expensive, without being able to fulfill the needs of the users. The absence of benchmarks for websites with dynamic content is the major obstacle to research in this area. These users place high demands on the speed of access to information on the Internet. This is why the performance of the web server is critically important. Several factors influence performance, such as server execution speed, network saturation on the internet or intranet, increased response time, and throughputs. By measuring these factors, we propose a performance evaluation strategy for servers that allows us to determine the actual performance of different servers in terms of user satisfaction. Furthermore, we identified performance characteristics such as throughput, resource utilization, and response time of a system through measurement and modeling by simulation. Finally, we present a simple queue model of an Apache web server, which reasonably represents the behavior of a saturated web server using the Simulink model in Matlab (Matrix Laboratory) and also incorporates sporadic incoming traffic. We obtain server performance metrics such as average response time and throughput through simulations. Compared to other models, our model is conceptually straightforward. The model has been validated through measurements and simulations during the tests that we conducted.

Performance Analysis and Optimization of Energy Harvesting Modulation for Multi-User Integrated Data and Energy Transfer

Integrated data and energy transfer(IDET)enables the electromagnetic waves to transmit wireless energy at the same time of data delivery for lowpower devices.In this paper,an energy harvesting modulation(EHM)assisted multi-user IDET system is studied,where all the received signals at the users are exploited for energy harvesting without the degradation of wireless data transfer(WDT)performance.The joint IDET performance is then analysed theoretically by conceiving a practical time-dependent wireless channel.With the aid of the AO based algorithm,the average effective data rate among users are maximized by ensuring the BER and the wireless energy transfer(WET)performance.Simulation results validate and evaluate the IDET performance of the EHM assisted system,which also demonstrates that the optimal number of user clusters and IDET time slots should be allocated,in order to improve the WET and WDT performance.

Optimization and Performance Analysis of Intelligent Video AI Dynamic

In today’s information age,video data,as an important carrier of information,is growing explosively in terms of production volume.The quick and accurate extraction of useful information from massive video data has become a focus of research in the field of computer vision.AI dynamic recognition technology has become one of the key technologies to address this issue due to its powerful data processing capabilities and intelligent recognition functions.Based on this,this paper first elaborates on the development of intelligent video AI dynamic recognition technology,then proposes several optimization strategies for intelligent video AI dynamic recognition technology,and finally analyzes the performance of intelligent video AI dynamic recognition technology for reference.

Application of Choquet Integral-Importance-Performance Analysis and TOPSIS Methods in Approaching the Preference Factors of Calligraphy and Seal Engraving Imagery

Classical Chinese characters,presented through calligraphy,seal engraving,or painting,can exhibit different aesthetics and essences of Chinese characters,making them the most important asset of the Chinese people.Calligraphy and seal engraving,as two closely related systems in traditional Chinese art,have developed through the ages.Due to changes in lifestyle and advancements in modern technology,their original functions of daily writing and verification have gradually diminished.Instead,they have increasingly played a significant role in commercial art.This study utilizes the Evaluation Grid Method(EGM)and the Analytic Hierarchy Process(AHP)to research the key preference factors in the application of calligraphy and seal engraving imagery.Different from the traditional 5-point equal interval semantic questionnaire,this study employs a non-equal interval semantic questionnaire with a golden ratio scale,distinguishing the importance ratio of adjacent semantic meanings and highlighting the weighted emphasis on visual aesthetics.Additionally,the study uses Importance-Performance Analysis(IPA)and Technique for Order Preference by Similarity to Ideal Solution(TOPSIS)to obtain the key preference sequence of calligraphy and seal engraving culture.Plus,the Choquet integral comprehensive evaluation is used as a reference for IPA comparison.It is hoped that this study can provide cultural imagery references and research methods,injecting further creativity into industrial design.

BER Performance Analysis of OTFS Systems with Power Allocation

Orthogonal time frequency space(OTFS),as a novel 2-D modulation technique,has been proposed to achieve better BER performances over delayDoppler channels.In this paper,we propose two different power allocation(PA)algorithms in OTFS systems with zero forcing(ZF)or minimum mean square error(MMSE)equalization,where general formulas with PA are derived in advance under the condition of minimum BER(MBER)criterion.On one hand,a suboptimal MBER power allocation method is put forward to achieve better BER performances,and then analytical BER expressions are derived with proposed PA strategy.Considering the case of MMSE equalization,a combined subsymbol allocation(SA)and PA strategy is raised,where some subsymbols may be abandoned due to worse channel conditions,and then it is proven effectively to improve BER performances through theoretical and simulation results.Furthermore,BER performances with proposed joint SA and PA strategy are also investigated in delay-Doppler channels,where an improved message passing(MP)receiver based on equivalent channel matrix with PA is given.

Dynamic Evolutionary Game-based Modeling,Analysis and Performance Enhancement of Blockchain Channels

The recent development of channel technology has promised to reduce the transaction verification time in blockchain operations.When transactions are transmitted through the channels created by nodes,the nodes need to cooperate with each other.If one party refuses to do so,the channel is unstable.A stable channel is thus required.Because nodes may show uncooperative behavior,they may have a negative impact on the stability of such channels.In order to address this issue,this work proposes a dynamic evolutionary game model based on node behavior.This model considers various defense strategies'cost and attack success ratio under them.Nodes can dynamically adjust their strategies according to the behavior of attackers to achieve their effective defense.The equilibrium stability of the proposed model can be achieved.The proposed model can be applied to general channel networks.It is compared with two state-of-the-art blockchain channels:Lightning network and Spirit channels.The experimental results show that the proposed model can be used to improve a channel's stability and keep it in a good cooperative stable state.Thus its use enables a blockchain to enjoy higher transaction success ratio and lower transaction transmission delay than the use of its two peers.

Performance analysis of quantum key distribution using polarized coherent-states in free-space channel

In free space channel,continuous-variable quantum key distribution(CV-QKD)using polarized coherent-states can not only make the signal state more stable and less susceptible to interference based on the polarization non-sensitive of the free-space channel,but also reduce the noise introduced by phase interference.However,arbitrary continuous modulation can not be carried out in the past polarization coding,resulting in that the signal state can not obtain arbitrary continuous value in Poincare space,and the security analysis of CV-QKD using polarized coherent-states in free space is not complete.Here we propose a new modulation method to extend the modulation range of signal states with an optical-fiber-based polarization controller.In particular,in terms of the main influence factors in the free-space channel,we utilize the beam extinction and elliptical model when considering the transmittance and adopt the formulation of secret key rate.In addition,the performance of the proposed scheme under foggy weather is also taken into consideration to reveal the influence of severe weather.Numerical simulation shows that the proposed scheme is seriously affected by attenuation under foggy weather.The protocol fails when visibility is less than 1 km.At the same time,the wavelength can affect the performance of the proposed scheme.Specifically,under foggy weather,the longer the wavelength,the smaller the attenuation coefficient,and the better the transmission performance.Our proposed scheme can expand the modulation range of signal state,and supplement the security research of the scheme in the free-space channel,thus can provide theoretical support for subsequent experiments.

Analysis of influence of heat exchangerfouling on heat transfer performancebased on thermal fluid coupling

A study on heat transfer performance by thermal fluid coupling simulation for the fouling in a shell-tube heat exchanger used in engineering was presented. The coupling simulation was performed in a fluid and solid domains under three different fouling conditions: fouling inside the tube, fouling outside the tube, and fouling inside the shell. The flow field, temperature, and pressure distributions in the heat exchanger were solved numerically to analyze the heat transfer performance parameters, such as thermal resistance. It is found that the pressure drop of the heat exchanger and the thermal resistance of the tube wall increase by nearly 30% and 20%, respectively, when the relative fouling thickness reaches 10%. The fouling inside the tube has more impact on the heat transfer performance of the heat exchanger, and the fouling inside the shell has less impact.

Seismic Liquefaction Resistance Based on Strain Energy Concept Considering Fine Content Value Effect and Performance Parametric Sensitivity Analysis

Liquefaction is one of the most destructive phenomena caused by earthquakes,which has been studied in the issues of potential,triggering and hazard analysis.The strain energy approach is a common method to investigate liquefaction potential.In this study,two Artificial Neural Network(ANN)models were developed to estimate the liquefaction resistance of sandy soil based on the capacity strain energy concept(W)by using laboratory test data.A large database was collected from the literature.One group of the dataset was utilized for validating the process in order to prevent overtraining the presented model.To investigate the complex influence of fine content(FC)on liquefaction resistance,according to previous studies,the second database was arranged by samples with FC of less than 28%and was used to train the second ANN model.Then,two presented ANN models in this study,in addition to four extra available models,were applied to an additional 20 new samples for comparing their results to show the capability and accuracy of the presented models herein.Furthermore,a parametric sensitivity analysis was performed through Monte Carlo Simulation(MCS)to evaluate the effects of parameters and their uncertainties on the liquefaction resistance of soils.According to the results,the developed models provide a higher accuracy prediction performance than the previously publishedmodels.The sensitivity analysis illustrated that the uncertainties of grading parameters significantly affect the liquefaction resistance of soils.

Performance Analysis of the Packet-Based PNT Service in NGSO Broadband Satellite Communication Systems

Providing alternative PNT service to GNSS-challenged users will be an important function of next-generation NGSO broadband satellite communication systems.Herein,a packet-based PNT service architecture in NGSO broadband systems is proposed in which a primary satellite and selected assistant satellites work together to provide PNT service to requesting users.Its positioning performance bounds are mathematically formulated by rigorously analyzing the bounds constrained by different waveforms.Simulations are conducted on different configurations of Walker Delta MEO constellations and Walker Star LEO constellations for corroboration,revealing the following:(1)Both MEO and LEO constellations achieve sub-meter-level positioning precision given enough satellites.(2)Compared to the GNSS Doppler-based velocity estimation method,the position advance based velocity estimation algorithm is more precise and applicable to the PNT service in NGSO broadband systems.(3)To provide PNT service to users in GNSS-challenged environments,the primary and each assistant satellite need only∼0.1‰of the time of one downlink beam.

A practical framework for performance-based reliability analysis of subway stations based on a faultestructure combined system

It is necessary to pay particular attention to the uncertainties that exist in an engineering problem to reduce the risk of seismic damage of infrastructures against natural hazards.Moreover,certain structural performance levels should be satisfied during strong earthquakes.However,these performance levels have been only well described for aboveground structures.This study investigates the main uncertainties involved in the performance-based seismic analysis of a multi-story subway station.More than 100 pulse-like and no pulse-like ground motions have been selected.In this regard,an effective framework is presented,based on a set of nonlinear static and dynamic analyses performed by OpenSees code.The probabilistic seismic demand models for computing the free-field shear strain of soil and racking ratio of structure are proposed.These models result in less variability compared with existing relations,and make it possible to evaluate a wider range of uncertainties through reliability analysis in Rtx software using the Monte Carlo sampling method.This work is performed for three different structural performance levels(denoted as PL1ePL3).It is demonstrated that the error terms related to the magnitude and location of earthquake excitations and also the corresponding attenuation relationships have been the most important parameters.Therefore,using a faultestructure model would be inevitable for the reliability analysis of subway stations.It is found that the higher performance level(i.e.PL3)has more sensitivity to random variables than the others.In this condition,the pulse-like ground motions have a major contribution to the vulnerability of subway stations.

A New Hybrid Hierarchical Parallel Algorithm to Enhance the Performance of Large-Scale Structural Analysis Based on Heterogeneous Multicore Clusters

Heterogeneous multicore clusters are becoming more popular for high-performance computing due to their great computing power and cost-to-performance effectiveness nowadays.Nevertheless,parallel efficiency degradation is still a problem in large-scale structural analysis based on heterogeneousmulticore clusters.To solve it,a hybrid hierarchical parallel algorithm(HHPA)is proposed on the basis of the conventional domain decomposition algorithm(CDDA)and the parallel sparse solver.In this new algorithm,a three-layer parallelization of the computational procedure is introduced to enable the separation of the communication of inter-nodes,heterogeneous-core-groups(HCGs)and inside-heterogeneous-core-groups through mapping computing tasks to various hardware layers.This approach can not only achieve load balancing at different layers efficiently but can also improve the communication rate significantly through hierarchical communication.Additionally,the proposed hybrid parallel approach in this article can reduce the interface equation size and further reduce the solution time,which can make up for the shortcoming of growing communication overheads with the increase of interface equation size when employing CDDA.Moreover,the distributed sparse storage of a large amount of data is introduced to improve memory access.By solving benchmark instances on the Shenwei-Taihuzhiguang supercomputer,the results show that the proposed method can obtain higher speedup and parallel efficiency compared with CDDA and more superior extensibility of parallel partition compared with the two-level parallel computing algorithm(TPCA).

Biomass Carbon Improves the Adsorption Performance of Gangue-Based Ceramsites:Adsorption Kinetics and Mechanism Analysis

The large accumulation of coal gangue,a common industrial solid waste,causes severe environmental problems,and green development strategies are required to transform this waste into high-value-added products.In this study,low-cost ceramsites adsorbents were prepared from waste gangue,silt coal,and peanut shells and applied to remove the organic dye methylene blue from wastewater.We investigated the microstructure of ceramsites and the effects of the sintering atmosphere,sintering temperature,and solution pH on their adsorption performance.The ceramsites sintered at 800℃under a nitrogen atmosphere exhibited the largest three-dimensional-interconnected hierarchical porous structure among the prepared ceramsites;further,it exhibited the highest methylene blue adsorption performance,with an adsorption capacity of 0.954 mg·g^(−1),adsorption efficiency of over 95%,and adsorption equilibrium time of 1 h at a solution pH of 9.The removal efficiency remained greater than 75%after five adsorption cycles.The adsorption kinetics data were analyzed using various models,including the pseudosecond-order kinetic model and Langmuir equation,and the adsorption was attributed to electrostatic interactions between the dyes and ceramsites,n-interactions,and hydrogen bonds.The prepared coal gangue ceramsites exhibited excellent adsorption capacities,removal rates,and cyclic stabilities,demonstrating their promising application prospects for the comprehensive utilization of solid waste and for wastewater treatment.

Assessment of the stiffened panel performance in the OTEC seawater tank design:Parametric study and sensitivity analysis

Ocean thermal energy conversion(OTEC)is a process of generating electricity by exploiting the temperature difference between warm surface seawater and cold deep seawater.Due to the high static and dynamic pressures that are caused by seawater circulation,the stiffened panel that constitutes a seawater tank may undergo a reduction in ultimate strength.The current paper investigates the design of stiffening systems for OTEC seawater tanks by examining the effects of stiffening parameters such as stiffener sizes and span-over-bay ratio for the applied combined loadings of lateral and transverse pressure by fluid motion and axial compression due to global bending moment.The ultimate strength calculation was conducted by using the non-linear finite element method via the commercial software known as ABAQUS.The stress and deformation distribution due to pressure loads was computed in the first step and then brought to the second step,in which the axial compression was applied.The effects of pressure on the ultimate strength of the stiffener were investigated for representative stiffened panels,and the significance of the stiffener parameters was assessed by using the sensitivity analysis method.As a result,the ultimate strength was reduced by approximately 1.5%for the span-over-bay ratio of 3 and by 7%for the span-over-bay ratio of 6.

Highly cited publication performance in the ophthalmology category in the Web of Science database:a bibliometric analysis

AIM:To determine and evaluate the features of highly cited articles(HCAs)in the ophthalmology category in the Science Citation Index Expanded(SCI-EXPANDED)from 1991 to 2020.METHODS:The Web of Science Core Collection documents with at least 100 citations from their publication year until December 31,2020,were evaluated as highly cited.The examined features were the distribution of yearly output and its average number of per publication,HCAs,authors,institutions,journals,and nations.The publication performance of nations and organizations was assessed using six publication indicators.The Y-index was employed to compare the research outputs of various authors.RESULTS:Publications that had cited the most references were highly published in high-impact factor journals.The United States of America came out on top across all six publication indicators,and it was home to eight of the top 10 most productive institutions.The articles written by Breivik et al(2006)and Farrar et al(2001)were highly cited and had a significant impact in 2020.The authors had a higher number of highly cited articles published as corresponding authors than as first authors.CONCLUSION:The findings of the present study highlight the current scope of global research in ophthalmology.The findings can help policy-makers and advisory groups of research centers to develop future policies.In addition,the findings can guide researchers in this field.

Evolutionary Algorithm Based Feature Subset Selection for Students Academic Performance Analysis

Educational Data Mining(EDM)is an emergent discipline that concen-trates on the design of self-learning and adaptive approaches.Higher education institutions have started to utilize analytical tools to improve students’grades and retention.Prediction of students’performance is a difficult process owing to the massive quantity of educational data.Therefore,Artificial Intelligence(AI)techniques can be used for educational data mining in a big data environ-ment.At the same time,in EDM,the feature selection process becomes necessary in creation of feature subsets.Since the feature selection performance affects the predictive performance of any model,it is important to elaborately investigate the outcome of students’performance model related to the feature selection techni-ques.With this motivation,this paper presents a new Metaheuristic Optimiza-tion-based Feature Subset Selection with an Optimal Deep Learning model(MOFSS-ODL)for predicting students’performance.In addition,the proposed model uses an isolation forest-based outlier detection approach to eliminate the existence of outliers.Besides,the Chaotic Monarch Butterfly Optimization Algo-rithm(CBOA)is used for the selection of highly related features with low com-plexity and high performance.Then,a sailfish optimizer with stacked sparse autoencoder(SFO-SSAE)approach is utilized for the classification of educational data.The MOFSS-ODL model is tested against a benchmark student’s perfor-mance data set from the UCI repository.A wide-ranging simulation analysis por-trayed the improved predictive performance of the MOFSS-ODL technique over recent approaches in terms of different measures.Compared to other methods,experimental results prove that the proposed(MOFSS-ODL)classification model does a great job of predicting students’academic progress,with an accuracy of 96.49%.