Optimization of composition and microstructure is important to enhance performance of solid oxide fuel cells （SOFC） and lithium-ion batteries （LIB）. For this, the porous electrode structures of both SOFC and LIB a...Optimization of composition and microstructure is important to enhance performance of solid oxide fuel cells （SOFC） and lithium-ion batteries （LIB）. For this, the porous electrode structures of both SOFC and LIB are modeled as a binary mixture of electronic and ionic conducting particles to estimate effective transport properties. Particle packings of 10000 spherical, binary sized and randomly positioned particles are created numerically and densified considering the different manufacturing processes in SOFC and LIB： the sintering of SOFC electrodes is approximated geometrically, whereas the calendering process and volume change due to intercalation in LIB are modeled physically by a discrete el- ement approach. A combination of a tracking algorithm and a resistor network approach is developed to predict the con- nectivity and effective conductivity for the various densified structures. For SOFC, a systematic study of the influence of morphology on connectivity and conductivity is performed on a large number of assemblies with different compositions and particle size ratios between 1 and 10. In comparison to percolation theory, an enlarged percolation area is found, es- pecially for large size ratios. It is shown that in contrast to former studies the percolation threshold correlates to varying coordination numbers. The effective conductivity shows not only an increase with volume fraction as expected but also with size ratio. For LIB, a general increase of conductivity during the intercalation process was observed in correlation with increasing contact forces. The positive influence of cal- endering on the percolation threshold and the effective conductivity of carbon black is shown. The anisotropy caused by the calendering process does not influence the carbon black phase.展开更多
The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistiv...The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistivity quantitatively,which eliminated the interference with conductivity evaluation brought by temperature variation.Finally,the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.展开更多
The flexible transparent conductive films （FrCFs） of silver nanowire-polyethylene terephthalate （AgNW- PET） were prepared by a facile method including vacuum filtration and mold transferring. The effect of silver ...The flexible transparent conductive films （FrCFs） of silver nanowire-polyethylene terephthalate （AgNW- PET） were prepared by a facile method including vacuum filtration and mold transferring. The effect of silver nanowire weight density on the optical and electrical properties of films, as well as the electrical percolation was investigated. The obtained typical AgNW-PET film exhibited high figure of merit of 31.3 × 10^-3 Ω^-1 with low sheet resistance of 4.95 D sq^-1 and high transparency at 550 nm of 83.0% （excluding PET substrate）. The resulting FTCFs based on PET substrate with high transmittance and low sheet resistance have a great potential in the application of high-performance flexible electronics and photovoltaic devices.展开更多
基金supported by the Helmholtz Portfolio "elektrochemische Speicher",particularly the work related to lithium-ion batteriespartially supported as part of the HeteroFoam Center,an Energy Frontier Research Center funded by the U.S.Department of Energy,Office of Science, Basic Energy Sciences(DE-SC0001061)+1 种基金support from the Center for Scientific Computing at the CNSI and MRL:an NSF MRSEC(DMR-1121053) and NSF (CNS-0960316)Australian Research Council Grant DE130101639
文摘Optimization of composition and microstructure is important to enhance performance of solid oxide fuel cells （SOFC） and lithium-ion batteries （LIB）. For this, the porous electrode structures of both SOFC and LIB are modeled as a binary mixture of electronic and ionic conducting particles to estimate effective transport properties. Particle packings of 10000 spherical, binary sized and randomly positioned particles are created numerically and densified considering the different manufacturing processes in SOFC and LIB： the sintering of SOFC electrodes is approximated geometrically, whereas the calendering process and volume change due to intercalation in LIB are modeled physically by a discrete el- ement approach. A combination of a tracking algorithm and a resistor network approach is developed to predict the con- nectivity and effective conductivity for the various densified structures. For SOFC, a systematic study of the influence of morphology on connectivity and conductivity is performed on a large number of assemblies with different compositions and particle size ratios between 1 and 10. In comparison to percolation theory, an enlarged percolation area is found, es- pecially for large size ratios. It is shown that in contrast to former studies the percolation threshold correlates to varying coordination numbers. The effective conductivity shows not only an increase with volume fraction as expected but also with size ratio. For LIB, a general increase of conductivity during the intercalation process was observed in correlation with increasing contact forces. The positive influence of cal- endering on the percolation threshold and the effective conductivity of carbon black is shown. The anisotropy caused by the calendering process does not influence the carbon black phase.
基金Funded by the National Natural Science Foundation of China(No.51178348)
文摘The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient（PTC）modelwas established to estimate the influence of temperature on the resistivity quantitatively,which eliminated the interference with conductivity evaluation brought by temperature variation.Finally,the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.
基金financial support from the National Natural Science Foundation of China(Grant No.21203226)Ningbo Key Laboratory of Silicon and Organic Thin Film Optoelectronic Technologies(Grant No.2014A22002)
文摘The flexible transparent conductive films （FrCFs） of silver nanowire-polyethylene terephthalate （AgNW- PET） were prepared by a facile method including vacuum filtration and mold transferring. The effect of silver nanowire weight density on the optical and electrical properties of films, as well as the electrical percolation was investigated. The obtained typical AgNW-PET film exhibited high figure of merit of 31.3 × 10^-3 Ω^-1 with low sheet resistance of 4.95 D sq^-1 and high transparency at 550 nm of 83.0% （excluding PET substrate）. The resulting FTCFs based on PET substrate with high transmittance and low sheet resistance have a great potential in the application of high-performance flexible electronics and photovoltaic devices.
