Interlaminar Bonding Performance of UHPC/SMA Based on Diagonal Shear Test

To evaluate various interlaminar bonding reinforcement techniques used for steel bridge decks,the UHPC surface was roughened with shot blasting(SB),transverse grooving(TG)and surface embedded stone(S),epoxy resin(E),epoxy asphalt(EA)and high viscosity high elasticity asphalt(HV)as interlayer bonding materials.In addition,a diagonal shear test was conducted using a self-designed diagonal shear jig.The effects of adhesive layer materials type,surface texture type,and different loading rates on the interlaminar bonding performance of UHPC/SMA combination specimens were investigated.The experimental study showed that the peak shear strength and shear modulus of the combined specimen decreased gradually with the decrease of thermosetting of the adhesive layer materials.The peak shear fracture energy of E was greater than that of HV and EA.The synergistic effect of the contact force generated by the roughing of the UHPC surface,the friction force,and the bonding force provided by the adhesive layer material can significantly improve the interlaminar shear performance of the assemblies.The power-law function of shear strength and shear modulus was proposed.The power-law model of peak shear strength and loading rate was verified.The shear strength and predicted shear strength satisfy the positive proportional functions with scale factors of 0.985,1.015,0.961,and 1.028,respectively.

Bonding Performance of Wood Treatment by Oxygen and Nitrogen Cold Plasma

In the test, woods were treated by N2, O2 cold plasma with the processing power 300 W, which last for 5 min; subsequently, the treated woods were bonded with MUF to valve the bonding performance, the contact angles of the treated/un- treated wood were tested. The chemical composition on the surface of wood with or without N2 cold plasma treatment was also studied by X-ray photoelectron spec- troscopy （XPS）. The results showed： the contact angles of the surface decreased; the surface free energy increased evidently that treated by N2 or O2 cold plasma; the average bonding performance of wood that treated by cold plasma （whether N2 or O2） increased obviously and more than 50% was proved compared with that un- treated by cold plasma. The XPS analysis showed the atomic ratio O/C has in- creased, and more groups were oxidized or more peroxides were formed on the surface of wood; N element was introduced to the wood surface after nitrogen cold plasma treatment and it was estimated to the group of -NH2.

Effects of Steam Heat-Treatment on Properties of Pinus massoniana Wood and Its Bonding Performance

Pinus massoniana wood was modified by steam heat-treatment at 160℃,180℃,200℃ and 220℃ respectively and effects of the changes of density,pH,surface wettability and apparent morphology of Pinus massoniana heat-treated wood on its bonding performance were studied in this paper.The results showed that Pinus massoniana wood underwent a series of physical and chemical changes during heat-treatment as the the following:(1)The degradation of hemicellulose and cellulose with low degree of polymerization,degradation and migration of the extract resulting in the decline of density and pH of heat-treated Pinus massoniana wood.(2)Brittle fracture occured on the cell wall surface,and the pit collapse,shrink and deformation,resulting in the formation of roughness and porosity on the wood surface.(3)The surface energy decreased with the improvement of temperature,the surface wettability of Pinus massoniana wood treated at 160℃–180℃ was good,while that at 200℃–220℃ showed hydrophobicity.(4)Changes of density,pH,surface roughness and porosity,and wettability resulted in a reduction in the bonding strength and reliability of heat-treated Pinus massoniana wood with MUF resin adhesive.(5)When the temperature was at 160℃–180℃,the better wettability of heat-treated Pinus massoniana wood could guarantee the better bonding performance.

Bending,Compression and Bonding Performance of Cross-Laminated Timber(CLT)Made from Malaysian Fast-Growing Timbers

This study investigated the bending,compression as well as the bonding performance of CLT panels made from fast-growing timber species,i.e.,Laran(Neolamarckia cadamba)and Batai(Paraserianthes falcataria).The variables studied were timber species(Laran and Batai),layers of lamination(3-layer and 5-layer),loading direction in bending(in-plane and out-of-plane),loading direction in compression(x-,y-,and z-axis)and different treatment conditions for bonding performance test.The desired outputs of this study were bending and compression properties(strength and stiffness)as well as bonding performance(block shear strength,wood failure percentage and delamination value).The bending and compression test were conducted according to EN16351:2015 and EN408:2012,respectively.On the other hand,the bonding performance test was determined by block shear and delamination test based on EN16351:2015 and EN14374:2004,respectively.Prior to block shear test,the samples were subjected to three different treatment conditions.The results showed that CLT made from 3-layer Laran timber,loaded at out-of-plane direction exhibited the highest bending properties.Contrarily,CLT made from 5-layered Batai timber,loaded at in-plane direction showed the lowest bending properties.Laran samples for compression loaded at x-axis exhibited the best compressive properties.Generally,Laran CLT showed greater bonding performance determined by shear test compared to Batai CLT for both 3-and 5-layer panels.On the contrary,delamination results showed that Batai CLT demonstrated better bonding performance compared to Laran CLT.In terms of bonding performance measured by wood failure percentage(WFP),most samples under various treatment conditions showed WFP≥80%except for samples under wet condition with WFP≤60%.

Bond-Slip Behavior of Steel Bar and Recycled Steel Fibre-Reinforced Concrete

Recycled steel fiber reinforced concrete is an innovative construction material that offers exceptional mechanical properties and durability.It is considered a sustainable material due to its low carbon footprint and environmental friendly characteristics.This study examines the key influencing factors that affect the behavior of this material,such as the steel fiber volume ratio,recycled aggregate replacement rate,concrete strength grade,anchorage length,and stirrup constraint.The study investigates the bond failure morphology,bond-slip,and bond strength constitutive relationship of steel fiber recycled concrete.The results show that the addition of steel fibers at 0.5%,1.0%,and 1.5%volume ratios can improve the ultimate bond strength of pull-out specimens by 9.05%,6.94%,and 5.52%,respectively.The replacement rate of recycled aggregate has minimal effect on the typical bond strength of pull-out specimens.However,the ultimate bond strengths of pull-out specimens with concrete strength grades C45 and C60 have improved compared to those with C30 grade.The specimens with longer anchorage lengths exhibit lower ultimate bond strength,with a reduction of 33.19%and 46.37%for anchorage lengths of 5D and 7D,respectively,compared to those without stirrups.Stirrup restraint of 1φ8 and 2φ8 improves the ultimate bond strength by 5.29%and 6.90%,respectively.Steel fibers have a significant effect on the behavior of concrete after it cracks,especially during the stable expansion stage,crack instability expansion stage,and failure stage.

BOND PERFORMANCE EXPERIMENT FOR FLY ASH CONCRETE AND STEEL BAR

The impact of fly ash content on bond performance of steel bars and their surrounding concrete is studied by means of sticking strain gauges on steel bars. The average bond stress-slip curves, the steel strain-anchor location curves, and the bond stress-anchor position curves of the pullout specimens with various fly ash contents are obtained. Results indicate that the bond performance of concrete and steel bars can be improved and the distribution of steel strain along the anchorage length tends to be more uniform by adding fly ash in concrete specimens, and both ultimate bond stress and ultimate slip deformation increase the most when 20% of specimens′ content is fly ash.

Plasma Treatment Induced Chemical Changes of Alkali Lignin to Enhance the Performances of Lignin-Phenol-Formaldehyde Resin Adhesive

Alkali lignin was processed by plasma and then used in modification of phenol formaldehyde resin in this study.Chemical structural changes of lignin which was processed by plasma as well as bonding strength,tensile property,curing performance and thermal property of the prepared phenol formaldehyde resin which was modified by the plasma processed lignin were analyzed.Results demonstrated that:(1)Alkali lignin was degraded after the plasma processing.The original groups were destroyed,and the aromatic rings collected abundant free radicals and oxygen-containing functional groups like hydroxyls,carbonyls,carboxyls and acyls were introduced into increase the reaction activity of lignin significantly.(2)The introduction of alkali lignin decreased the free formaldehyde content and increased bonding strength and toughness of the prepared phenol formaldehyde resin,especially after the introduction of lignin treated with plasma.(3)The introduction of alkali lignin led to high curing temperature for the prepared phenol formaldehyde resin,but that was reduced by the plasma processed alkali lignin.(4)The introduction of alkali lignin could also increase thermal stability of phenol formaldehyde resin,but that was modified by plasma processed alkali lignin was better than the unprocessed lignin.Based on the results,the plasma processed lignin was used to modify phenol formaldehyde resin,which could increase the strength and toughness of phenol formaldehyde resin significantly.

Effects of Surface Roughness on Interface Bonding Performance for 316H Stainless Steel in Hot-Compression Bonding

The metallurgical bonding quality of bonding joints is affected by the substrate surface state in hot-compression bonding(HCB),and the surface roughness is a core indicator of the surface state.However,the effects of surface roughness on interface bonding performance(IBP)in the HCB process are unclear for substrates with refractory oxide scales.This study presents the effects of surface roughness on IBP for 316H stainless steel joints fabricated by HCB.A set of HCB parameters for interface bonding critical state of 316H stainless steel joints was determined.The HCB experiments were carried out under parameters of interface bonding critical state to amplify the effect of surface roughness.The interface morphologies,element distribution,and tensile properties were used to characterize the IBP.As a result,the formation mechanisms of the interface pits were revealed and the variation trend of pit number with the roughness was summarized.Finally,the mapping relation between surface roughness and IBP was established.The results show that the degree of rotational dynamic recrystallization becomes weaker with the decrease in the surface roughness and the interface bonding mechanism is completely transformed into discontinuous dynamic recrystallization when the roughness is lower than 0.020μm Sa.The number of interfacial pits decreases as the roughness decreases owing to the weakening of oxide scale aggregation and abrasive inclusion mechanism.The elongation of the tensile specimen cannot increase significantly while the roughness is lower than 0.698μm Sa.

The preparation and performance analysis of zirconium-modified aluminum phosphate-based high-temperature(RT-1500℃)resistant adhesive for joining alumina in extreme environment

High-temperature-resistant adhesives are critical materials in the aerospace field.The zirconium-modified aluminum phosphate-based adhesives developed in this work had the advantage of adjustable thermal expansibility,achieving a high matching of coefficient of thermal expansion(CTE)with alumina.The introduction of zirconium can significantly improve the thermal stability of the adhesive matrix,and the Zr/Al ratio substantially affects the various reaction processes inside the adhesive,especially the types of zirconium-containing compounds.Most of the zirconium-containing compounds in the A7Z3 adhesive were ZrO_(2) only when the mass ratio of zirconium hydroxide to aluminum hydroxide was 3:7,which was the key reason why it had the highest CTE.The room-temperature bonding strength of A7Z3 after heat treatment at 1500℃reached 67.2 MPa.After pretreatment at 1500℃,the high-temperature bonding strength of A7Z3 was greater than 50 MPa in the range of(room temperature)RT-1000℃.After 40 thermal cycles between RT and 1500℃,the bonding strength still reached 10 MPa.Physical bonding occurred at temperatures below 1000℃,while chemical bonding dominated above 1000℃based on the generation of Al5BO9 and mullite at the interfaces.

Bond Behavior between BFRP Bars and Hybrid Fiber Recycled Aggregate Concrete after High Temperature

The aim of this study is to improve the bond performance of basalt fiber reinforced polymer(BFRP)bars and recycled aggregate concrete(RAC)after being exposed to high temperatures.The bond behavior(failure modes,bond strength,bond stress-slip curves)between BFRP bars and hybrid fiber recycled aggregate concrete(HFRAC)after being exposed to temperatures ranging from 20℃up to 500℃was studied by using pull-out tests.The effect of high temperatures on mechanical properties of concrete(compressive strength,splitting tensile strength)and tensile strength of BFRP bars was also investigated.The bond strength decreased as the temperature increased and the drop of bond strength between RAC and BFRP bar was larger than that between HFRAC and BFRP bar.As the temperature rises,the key factor affecting the bond strength was gradually transformed from concrete strength to BFRP bar strength.The relationship between bond stress and slip in the dimensionless bond stress-slip ascending section was established,which was in good agreement with the experimental results.

Research Progress of Soybean Protein Adhesive:A Review

Traditional formaldehyde-based adhesives rely excessively on petrochemical resources,release toxic gases,and pollute the environment.Plant-derived soybean protein adhesives are eco-friendly materials that have the potential to replace the formaldehyde-based adhesives used to fabricate wood-based panels.However,the poor water resistance,high brittleness,and poor mildew resistance of soybean protein adhesives limit their industrial applications.This article reviews recent research progress in the modification of soybean protein adhesives for improving the bonding performance of adhesives used for wood-based panel fabrication.Modification methods were summarized in terms of water resistance,solid content,and mildew resistance.The modification mechanisms and remaining problems were also discussed.Finally,the current industrial applications and the future research direction of soybean protein adhesives are discussed.

Impact of Procurement Methods and Procurement Requirements on Cost Over-run of Public Building Projects in Uganda

Cost over-run in building projects is endemic and routinely increases construction cost to as high as 52%of contract sums in Uganda.The consequence of this is underachievement of investment objectives due to additional costs to complete projects.This research investigated how procurement requirements and procurement methods combine to determine cost over-run of building projects.Procurement requirements of bid time,performance bond,insurance,workload and experience of contractors were investigated within contexts of procurement methods of open domestic bidding,restricted domestic bidding,open international bidding,restricted international bidding and requests for quotations.Purposive and snow-ball sampling were used in identifying construction professionals,consultants and contractors of building projects with cost over-runs.Correlation and independence of procurement requirements on 37 cost over-run datasets were analysed by Spearman's bivariate correlation co-efficient at 5%level of significance and variable inflationary factor of less than 5 respectively.Bid time and performance bond were found to reduce cost over-run of building projects most followed by workload and experience.Insurance increased cost over-run marginally.The novel contribution of this research is a model that explains 63%of cost over-run with 9%margin of error.The variants of the model for each procurement method are presented.

Research progress on short-term mechanical properties of FRP bars and FRP-reinforced concrete beams

Fiber-reinforced polymer(FRP)bars have been increasingly recognized in the field of civil engineering due to their advantages of light weight,high strength and excellent durability.FRP bars can replace steel bars in concrete beams and effectively improve the durability of beams.In this paper,the literature relevant to the short-term mechanical properties of FRP bars and FRP-reinforced concrete beams was reviewed based on previous studies and practical engineering application.Firstly,the mechanical properties of FRP bars were reviewed.Different types of fibers or steel and fibers can be combined to obtain hybrid fiber-reinforced polymer(HFRP)or steel-fiber composite bars(SFCB)with excellent mechanical performance,respectively.The bond performance and bond-slip model between FRP bars and concrete were discussed.Several common bond-slip models were usually used to study the bond performance between carbon fiber-reinforced polymer(CFRP)bars or glass fiber-reinforced polymer(GFRP)bars and concrete,but changing the type of FRP bars will lead to larger dispersion.Then,the experimental studies,theoretical calculation methods and finite element simulation methods of flexural/shear behavior of FRP-reinforced concrete beams were presented.Finally,their applications in practical engineering were discussed and the prospects of further research were proposed.It is pointed out that FRP-reinforced ultra-high performance concrete(UHPC)beams,FRP-reinforced geopolymer concrete(GPC)beams,engineered cementitious composites(ECC)-FRP-reinforced concrete beams,prestressed FRP-reinforced concrete beams and steel/FRP hybrid-reinforced concrete beams can effectively improve the deformation resistance and poor ductility of pure FRP-reinforced concrete beams.

A novel porous silica-zirconia coating for improving bond performance of dental zirconia

Objective:To coat a zirconia surface with silica-zirconia using a dip-coating technique and evaluate its effect on resin-zirconia shear bond strength(SBS).Methods:A silica-zirconia suspension was prepared and used to coat a zirconia surface using a dip-coating technique.One hundred and eighty-nine zirconia disks were divided into three groups according to their different surface treatments(polishing,sandblasting,and silica-zirconia coating).Scanning electron microscopy(SEM),energy dispersive X-ray(EDX),and X-ray diffraction(XRD)were used to analyze the differently treated zirconia surfaces.Different primer treatments(Monobond N,Z-PRIME Plus,and no primer)were also applied to the zirconia surfaces.Subsequently,180 composite resin cylinders(Filtek Z350)were cemented onto the zirconia disks with resin cement(RelyX Ultimate).The SBS was measured after water storage for 24 h or 6 months.The data were analyzed by two-way analysis of variance(ANOVA).Results:SEM and EDX showed that the silica-zirconia coating produced a porous layer with additional Si,and XRD showed that only tetragonal zirconia was on the silica-zirconia-coating surface.Compared with the control group,the resin-zirconia SBSs of the,andblasting group and silica-zirconia-coating group were significantly increased(P<0.05).The silica-zirconia coating followed by the application of Monobond N produced the highest SBS(P<0.05).Water aging significantly reduced the resin-zirconia SBS(P<0.05).Conclusions:Dip-coating with silica-zirconia might be a feasible way to improve resin-zirconia bonding.

Experimental and numerical analysis on interface damage ofslab track under freeze-thaw cycles

The interface of slab track laid in cold regions is prone to debonding under the coupling of freeze-thaw cyclesand temperature loads.Based on the composite specimen tests,the parameters of cohesive zone model were obtained andused in a simulation model of CRTS III prefabricated slab track to study the interlayer damage.The results show that 1)the digital image correlation(DIC)technique can accurately capture the strain field changes on the interface of compositespecimens under splitting and shear loading;2)when the temperature gradient is−40℃/m−60℃/m,the interfacedamage of the slab track is minimal and presents different patterns of expansion under positive and negative temperaturegradients,each corresponding to damage of the cohesive element dominated by shear stress and normal tensile stress,respectively;3)the reduction of the elastic modulus at the concrete base after freeze-thaw inhibits interface damage andleads to a higher starting temperature gradient load,but cracking can occur on the concrete base after 150 freeze-thaws.For this reason,in the light of damage control of both the interface and concrete base,the elastic modulus of the concretebase is 54%or over that without freeze-thaw cycles.