TRACTIVE PERFORMANCE ANALYSIS ON RADIALLY DEPLOYABLE WHEEL CONFIGURATION OF LUNAR ROVER VEHICLE BY DISCRETE ELEMENT METHOD

With the consideration of volume constraint of launch vehicle and trafficability of rover vehicle on lunar regolith terrain, a new design of radially deployable wheel is presented. For the purpose of achieving the meso-mechanics and dynamical behavior of lunar soil particles as well as macro-parameters of tractive performance for radially deployable wheel, the interaction between two types of wheel configurations and lunar soil particles is analyzed by means of discrete element method. The network of contact forces, the displacement vector chart, and the deformation of lunar soil beneath wheels are plotted. The equations of soil thrust, motion resistance, drawbar pull and driven torque are derived in granular scale based on the coordinates transformation and algebraic summation. The calculated results show that there is sufficient traction for both 6-split and 12-split radially deployable wheels with 304 mm outspread diameter to negotiate lunar regolith terrain specified here; the value of drawbar pull enhances with the increase of split number of radially deployable wheel, however, the required driven torque increases simultaneously, therefore, the tractive efficiency decreases.

Set Programming Method and Performance Improvement of Phase Change Random Access Memory Arrays

A novel slow-down set waveform is proposed to improve the set performance and a 1 kb phase change random access memory chip fabricated with a 13nm CMOS technology is implemented to investigate the set performance by different set programming strategies based on this new set pulse. The amplitude difference （I1 - I2） of the set pulse is proved to be a crucial parameter for set programming. We observe and analyze the cell characteristics with different I1 - I2 by means of thermal simulations and high-resolution transmission electron microscopy, which reveal that an incomplete set programming will occur when the proposed slow-down pulse is set with an improperly high I1 - I2. This will lead to an amorphous residue in the active region. We also discuss the programming method to avoid the set performance degradations.

Analysis of Cavitation Performance of a 2-D Hydrofoil Based on Mixed-iterative Method

In order to study cavitation characteristics of a 2-D hydrofoil, the method that combines nonlinear cavitation model and mixed-iteration is used to predict and analyze the cavitation performance of hydrofoils. The cavitation elements are nonlinearly disposed based on the Green formula and perturbation potential panel method. At the same time, the method that combines cavity shape for fixed cavity length （CSCL） iteration and cavity shape for fixed cavitation number （CSCN） iteration is used to work out the thickness and length of hydrofoil cavitations. Through analysis of calculation results, it can be concluded that the jump of pressure and velocity potentially exist between cavitation end area and non-cavitations area on suction surface when cavitation occurs on hydrofoil. In certain angles of attack, the cavitation number has a negative impact on the length of cavitations. And under the same angle of attack and cavitation number, the bigger the thickness of the hydrofoil, the shorter the cavitations length.

Method for the Determination of Sudan Dyes in Foods-High Performance Liquid Chromatography Jointly Issued by AQSIQ and SAC

Sudan Red are the chemosynthesis dyes of series of azo, which are mainly used as coloring additives in ma- nufacturing of some products, such as the wax, the oil-dyes, the petrol, and etc. In the process of food production, Sudan Dyes are banned to be used as food dyes in our country.

Characterization Methods for Azobenzene Photoisomerization Energy Storage: A Review

The development of azobenzene photoisomerization materials marks a pivotal advancement in solar-thermal conversion technologies.Their properties and performance,explored through comprehensive characterization,are vital for further progress.Despite extensive research in this area,a detailed summary of characterization methods for azobenzene materials remains largely unexplored.This review addresses this gap by detailing structural and performance characterization techniques.It provides an in-depth overview of various experimental methods,highlighting their objectives,operational mechanics,and practical applications.This detailed review sheds light on the complex relationship between the materials'structure and their performance.Moreover,the review presents a critical analysis of these methods,assessing their strengths and limitations.By doing so,it highlights the revolutionary potential of azobenzene materials in the realm of solar energy conversion and underscores their significance in fostering sustainable energy solutions.

Blade Shape Optimization of Liquid Turbine Flow Sensor

Based on the characteristic curve analysis, the method using D(K^2) square difference of meter factor at different flow rates was developed to evaluate the performance of turbine flow sensor in this study. Then according to the distribution of entrance velocity, it was supposed that reducing the blade area near the tip could decrease the linearity error of a sensor. Therefore, the influence of different blade shape parameters on the performance of the sensor was investigated by combining computational fluid dynamics(CFD)simulation with experimental test. The experimental results showed that, for the liquid turbine flow sensor with a diameter of 10 mm, the linearity error was smallest, and the performance of sensor was optimal when blade shape parameter equaled 0.25.

Graphite Anode for Potassium Ion Batteries: Current Status and Perspective

With the increased demand from the storage of renewable energy sources,some safe and inexpensive energy storage technologies instead of Li-ion batteries become urgently needed.Therefore,K-ion batteries(KIBs)have attracted much attention and evolved significant development because of the low price,safety,and similar property compared with Li-ion batteries.Due to the high reversibility,stability,and low potential plateau,graphite becomes a current research focus and is regarded as one of the most promising KIB’s anode materials.In this review,we mainly discuss the electrochemical reaction mechanism of graphite during potassiation-depotassiation process and analyze the effects of electrode/electrolyte interface on graphite for Kion storage.Besides,we summarize several kinds of methods to improve the performance of graphite for KIBs,including the design of graphite structure,selection of appropriate binder,solvent chemistry,and salt chemistry.Meanwhile,a concept of“relative energy density”is raised,which can be more accurate to evaluate the genuine electrochemical performance of graphite anode involving the specific capacity and potential.In addition,we also summarize the considerable challenges to current graphite anode in KIBs and we believe our work will offer alterative solutions to further explore high-performance graphite anode of K-ion storage.

Analysis of Sucrose Esters with Long Acyl Chain by Coupling of HPLC-ELSD with ESI-MS System

The analysis of sucrose esters with long acyl chain by improved high performance liquid chromatographic method with evaporative light scattering detection （HPLC-ELSD） and electrospray ionization mass spectrum （ESI-MS） is investigated. The improved HPLC-ELSD method for the separation and quantitation of commercial and synthesized sucrose esters is described. Samples are analyzed by means of a reversed-phase （RP） HPLC using a Hypersil C8 column （250 mm× 4.6 mm, 5 μm particle size） with methanol-tetrahydrofuran （vo）ume ratio of 90 ： 10） and water under gradientcondition as the mobile phase, in which the flow rate is 1.0 ml·min^-1 and the column temperature is set at 40℃. This procedure provides a complete separation and determination ot monoester, diester, triester and higher esters with different acyl chain lengths in each fraction by a single run, in combination with the ESI-MS technology. With this method, it is possible to determine the approximate compositions of monoto polyesters in one analysis and quantitate pure positional isomers precisely using an external standard method. It is found that the method of ESI-MS coupling with HPLC system for the analysis of sucrose esters is straight forward, rapid and inexpensive, and can be readily applied in synthesis, purification and structure studies.

Influence of air pressure on the performance of plasma synthetic jet actuator

Plasma synthetic jet actuator（PSJA） has a wide application prospect in the high-speed flow control field for its high jet velocity.In this paper,the influence of the air pressure on the performance of a two-electrode PSJA is investigated by the schlieren method in a large range from 7 k Pa to 100 k Pa.The energy consumed by the PSJA is roughly the same for all the pressure levels.Traces of the precursor shock wave velocity and the jet front velocity vary a lot for different pressures.The precursor shock wave velocity first decreases gradually and then remains at 345 m/s as the air pressure increases.The peak jet front velocity always appears at the first appearance of a jet,and it decreases gradually with the increase of the air pressure.A maximum precursor shock wave velocity of 520 m/s and a maximum jet front velocity of 440 m/s are observed at the pressure of 7 k Pa.The averaged jet velocity in one period ranges from 44 m/s to 54 m/s for all air pressures,and it drops with the rising of the air pressure.High velocities of the precursor shock wave and the jet front indicate that this type of PSJA can still be used to influence the high-speed flow field at 7 k Pa.

Extension of TOPSIS for fuzzy multi-attribute decision making problem based on experimental analysis

This paper is concerned with a technique for order performance by similarity to ideal solution（TOPSIS） method for fuzzy multi-attribute decision making,in which the information about attribute weights is partly known and the attribute values take form of triangular fuzzy numbers.Considering the fact that the triangular fuzzy TOPSIS results yielded by different distance measures are different from others,a comparative analysis of triangular fuzzy TOPSIS ranking from each distance measure is illustrated with discussion on standard deviation.By applying the most reasonable distance,the deviation degrees between attribute values are measured.A linear programming model based on the maximal deviation of weighted attribute values is established to obtain the attribute weights.Therefore,alternatives are ranked by using TOPSIS method.Finally,a numerical example is given to show the feasibility and effectiveness of the method.

Rock excavation using surface miners: An overview of some design and operational aspects

Surface miner, a continuous mining machine, is being manufactured in India and abroad owing to enhanced demand of production in various mining industries like coal, limestone, gypsum, bauxite etc. Different types of surface miners are manufactured today based on cutting drum placement and design specifications. Selective mining without drilling and blasting, high production and small size products are some of the prominent attractive features obtained with these moving marvels. This machine can be used with good efficiency in soft to medium hard rock (100-120 MPa). This paper synthesizes the different applications, equipment models, features offered, operating methods, cutting performance assessment models as well as typical production performance of surface miner in coal and limestone mines of India. Engine hour metre reading, diesel and pick consumptions are linearly influenced by production. The emphasis for future research is also brought out.

Prediction and Optimization Performance Models for Poor Information Sample Prediction Problems

The prediction process often runs with small samples and under-sufficient information.To target this problem,we propose a performance comparison study that combines prediction and optimization algorithms based on experimental data analysis.Through a large number of prediction and optimization experiments,the accuracy and stability of the prediction method and the correction ability of the optimization method are studied.First,five traditional single-item prediction methods are used to process small samples with under-sufficient information,and the standard deviation method is used to assign weights on the five methods for combined forecasting.The accuracy of the prediction results is ranked.The mean and variance of the rankings reflect the accuracy and stability of the prediction method.Second,the error elimination prediction optimization method is proposed.To make,the prediction results are corrected by error elimination optimization method(EEOM),Markov optimization and two-layer optimization separately to obtain more accurate prediction results.The degree improvement and decline are used to reflect the correction ability of the optimization method.The results show that the accuracy and stability of combined prediction are the best in the prediction methods,and the correction ability of error elimination optimization is the best in the optimization methods.The combination of the two methods can well solve the problem of prediction with small samples and under-sufficient information.Finally,the accuracy of the combination of the combined prediction and the error elimination optimization is verified by predicting the number of unsafe events in civil aviation in a certain year.

Real-Time Performance Assessment of Operating Photovoltaic (PV) Systems

A technology called solar energy is a very promising technique, and is considered as the cleanest and the most abundant renewable resource that is naturally available every day. In this paper, a MATLAB environment has been developed to calculate real-time power incidence on a PV system. It takes into account the time, location, PV tilt, and azimuth angles, and weather conditions to estimate incident power. In this paper, one case study is considered at New York State location. It has been applied to a newly installed 8 kW residential system located in Inwood. The solar panels are made up of silicon HIT (Heterojunction with Intrinsic Thin Layer) cells by Panasonic and solar cell rated at 19%. The result shows that the system is performing at its rated efficiency. The calculations involve the determination of direct, diffused and reflected radiation on the panels taking into account the time of the day, location, PV area, and orientations and weather conditions. The cloudiness index may be estimated based on the weather data and included in the calculations. After performing the irradiance calculations, the output power is estimated based on the rated efficiency at its temperature and compared with the generated output power. The real-time assessment of a PV system performance, during the operational time monitors the health of the PV system. The data obtained by this calculator may accompany production data provided to the consumer by the utility company.

Assessment of Patulin Content in Apple Puree and Apple and Fruit Puree by High Performance Liquid Chromatography

An analytical method was developed and validated for determination of patulin in apple puree by HPLC. Extraction and clean-up ofpatulin from clear extract are achieved on AFFINIMIP SPEPATULIN cartridges. Patulin is then separated on a Hypersil GOLD column 150 mm × 4 mm, 5 μtmand detected at 276 nm. The recovery in the range of 5 μg/kg-80 μg/kg was 81.47%. The limit of detection （LOD） was 1.36 μg/kg, and the limit of quantification （LOQ） was 4.55 μg/kg. The patulin content of the commercial samples of apple puree and samples of apple and fruit puree forinfants and young children as well as the samples of apple puree prepared from two apple varieties intended for processing （Jonathan, Florina） and obtained from conventional and uncertified organic cultures has been evaluated in this paper. The 44.83% patulin concentration of the analyzed samples were under the maximum level of the European Commission Regulation （EC） 1881/2006, in 46.55% of the analyzed samples patulin was not detected and in 8.62% of samples patulin concentration was lower than LOQ （European Comission, 2006a） Patulin was not detected in samples of apple puree intended for infants and young children consumption.

Assessing green management performance of industrial enterprise:A case study of BH Petrochemical Co.,Ltd at the high-efficiency ecological economic zone of the Yellow River Delta

This paper puts forward the connotation of enterprise green management and green management performance evaluation,analyzes the characteristics of enterprise green management performance evaluation and decomposes its content.Using the triple performance method,the paper constructs the performance evaluation index system of enterprise green management.Taking BH Petrochemical Co.,Ltd.at the high-efficiency ecological economic zone of the Yellow River Delta as an example,by using analytic hierarchy process(AHP)and Matlab programming,this paper determines the weight of each index in the enterprise green management performance evaluation index system,the fuzzy comprehensive evaluation method is used to evaluate the green management performance evaluation of industrial enterprises.The results show that the performance evaluation index system of enterprise green management constructed by"triple performance method"has important theoretical significance and application value for evaluating and guiding enterprises to strengthen their green management.

The Preliminary Study on the Performance Appraisement about the Logistics Network Organization

How the performance in the course of implementing the logistics network organization is, and how the benefit level is produced, are undoubtedly focuses that cooperative parties pay close attention to, and the key to the network organization, too. The research on the performance appraisement about the network organization is not only very necessary, but also very important. This paper describes the characteristics of the performance appraisement about the logistics network organization, and sets up the evaluation index through analyzing the principle of constituting the logistics network organization＇s performance index system.

A dynamic detection method to improve SLAM performance

Simultaneous localization and mapping(SLAM) technology is a research hotspot in the field of intelligent mobile robot, and many researchers have developed many classic systems in the past few decades. However, most of the existing SLAM methods assume that the environment of the robot is static, which results in the performance of the system being greatly reduced in the dynamic environment. To solve this problem, a new dynamic object detection method based on point cloud motion analysis is proposed and incorporated into ORB-SLAM2. First, the method is regarded as a preprocessing stage, detecting moving objects in the scene, and then removing the moving objects to enhance the performance of the SLAM system. Experiments performed on a public RGB-D dataset show that the motion cancellation method proposed in this paper can effectively improve the performance of ORB-SLAM2 in a highly dynamic environment.

Methods to improve the performance of the swept source at 1.0 μm based on a polygon scanner

In this work, we investigate the methods to improve the performance of the swept source at 1.0 μm based on a polygon scanner, including in-cavity parameters and booster structures out of the cavity. The three in-cavity parameters are the cavity length, the rotating speed of the polygon scanner, and the in-cavity energy. With the decrease of cavity length, the spectrum bandwidth becomes wider and the duty cycle becomes higher.With the increase of the rotating speed of the polygon, the spectrum bandwidth becomes narrower, and the duty cycle becomes lower but the repetition rate becomes higher. With more energy in-cavity, the spectrum bandwidth becomes wider and the duty cycle becomes higher. The booster structures include the buffered structure, secondary amplifier, and dual-semiconductor optical amplifier configuration, which are used to increase the sweep frequency to 86 kHz, the output power to 18 mW, and the tuning bandwidth to 131 nm, respectively.

Electrochemical methods for the characterization and interfacial study of dye-sensitized solar cell

Dye-sensitized solar cell （DSSC） is one of the most rapidly developed solar cells in the past 20 years. Many characterization methods have been employed for further understanding the operational details of the photo- electric conversion in DSSC as well as the evaluation of cell performance. Electrochemical methods have become pow- erful tools for studying the charge transfer and interfacial process. In this review, we introduce and explain the various electrochemical methods used to characterize and analyze DSSC, including current-voltage （I-V） scan measurement, cyclic voltammetry, electrochemical impedance spec- troscopy, intensity-modulated photocurrent spectroscopy, and intensity-modulated photovoltage spectroscopy. In ad- dition, some applications were provided as samples to elucidate electron transfer kinetics, energy levels and electrocatalytic activity of the materials used in DSSC.

Evaluation of method performance for osteometric sorting of commingled human remains

Evaluation of method performance involves the consideration of numerous factors that can contribute to error.A variety of measures of performance can be borrowed from the signal detection literature and others are drawn from statistical science.This article demonstrates the principles of performance evaluation by applying multiple measures to osteometric sorting models for paired elements run against data from known individuals.Results indicate that false positive rates are close,on average,to expected values.As assemblage size grows,the false positive rate becomes unimportant and the false negative rate becomes significant.Size disparity among the commingled individuals plays a significant role in method performance,showing that case-specific circumstances(e.g.assemblage size and size disparity)will determine method power.