Adaptive Gain Tuning Rule for Nonlinear Sliding-mode Speed Control of Encoderless Three-phase Permanent Magnet Assisted Synchronous Motor

In this paper, an adaptive gain tuning rule is designed for the nonlinear sliding mode speed control(NSMSC) in order to enhance the dynamic performance and the robustness of the permanent magnet assisted synchronous reluctance motor(PMa-Syn RM) with considering the parameter uncertainties. A nonlinear sliding surface whose parameters are altering with time is designed at first. The proposed NSMSC can minimize the settling time without any overshoot via utilizing a low damping ratio at starting along with a high damping ratio as the output approaches the target set-point. In addition, it eliminates the problem of the singularity with the upper bound of an uncertain term that is hard to be measured practically as well as ensures a rapid convergence in finite time, through employing a simple adaptation law. Moreover, for enhancing the system efficiency throughout the constant torque region, the control system utilizes the maximum torque per ampere technique. The nonlinear sliding surface stability is assured via employing Lyapunov stability theory. Furthermore, a simple sliding mode estimator is employed for estimating the system uncertainties. The stability analysis and the experimental results indicate the effectiveness along with feasibility of the proposed speed estimation and the NSMSC approach for a 1.1-k W PMa-Syn RM under different speed references, electrical and mechanical parameters disparities, and load disturbance conditions.

Speed Regulation Method Using Genetic Algorithm for Dual Three-phase Permanent Magnet Synchronous Motors

Dual three-phase Permanent Magnet Synchronous Motor(DTP-PMSM)is a nonlinear,strongly coupled,high-order multivariable system.In today’s application scenarios,it is difficult for traditional PI controllers to meet the requirements of fast response,high accuracy and good robustness.In order to improve the performance of DTP-PMSM speed regulation system,a control strategy of PI controller based on genetic algorithm is proposed.Firstly,the basic mathematical model of DTP-PMSM is established,and the PI parameters of DTP-PMSM speed regulation system are optimized by genetic algorithm,and the modeling and simulation experiments of DTP-PMSM control system are carried out by MATLAB/SIMULINK.The simulation results show that,compared with the traditional PI control,the proposed algorithm significantly improves the performance of the control system,and the speed output overshoot of the GA-PI speed control system is smaller.The anti-interference ability is stronger,and the torque and double three-phase current output fluctuations are smaller.

Rotor Strength Analysis of High-speed Permanent Magnet Synchronous Motors

为了对转子进行有效的冷却，在满足电机电磁性能的前提下，可通过减小保护套的厚度来尽可能增大定转子之间的气隙，因而必须对保护套和永磁体进行强度校核。将转子受力状况简化为平面应变问题，在此基础上推导出了两层过盈配合、三层过盈配合转子的应力场、应变场、位移场的解析公式，并利用有限元方法验证了解析公式的正确性。归纳了高速情况下热套式永磁转子强度设计准则，为转子的优化设计提供了理论依据。以一台额定转速120kr／min、10kW的高速永磁同步电机为例，给出了两种常用过盈配合高速电机转子的强度设计方法。

Analysis for Rotor Losses of High Speed Permanent Magnet Synchronous Motor

This paper presents an analysis based on analytical method for solid rotor motors for determining the rotor eddy current losses due to the current harmonics of the stator winding. The accuracy of the analytical results is verified by experiments.

Analysis of temperature field for a surface-mounted and interior permanent magnet synchronous motor adopting magnetic-thermal coupling method

Aiming at obtaining high power density of surface-mounted and interior permanent magnet synchronous motor(SIPMSM),it is important to accurately calculate the temperature field distribution of SIPMSM,and a magnetic-thermal coupling method is proposed.The magnetic-thermal coupling mechanism is analyzed.The thermal network model and finite element model are built by this method,respectively.The effects of power frequency on iron losses and temperature fields are analyzed by the magnetic-thermal coupling finite element model under the condition of rated load,and the relationship between the load and temperature field is researched under the condition of the synchronous speed.In addition,the equivalent thermal network model is used to verify the magnetic-thermal coupling method.Then the temperatures of various nodes are obtained.The results show that there are advantages in both computational efficiency and accuracy for the proposed coupling method,which can be applied to other permanent magnet motors with complex structures.

Investigation of Optimal Split Ratio of 6-Slot/2-pole High Speed Permanent Magnet Motor with Toroidal Winding

Split ratio,i.e.the ratio of stator inner diameter to outer diameter,has a closed relationship with electromagnetic performance of permanent magnet(PM)motors.In this paper,the toroidal windings with short end-winding axial length are employed in the 6-slot/2-pole(6s/2p)PM motor for high speed applications.The split ratio is optimized together with the ratio of inner slot to outer slot area,i.e.slot ratio,considering stator total loss(stator iron loss and copper loss).In addition,the influence of maximum stator iron flux density and tooth-tip on the optimal split ratio,slot ratio,and average torque is investigated.The analytical predictions show that when the slot ratio is 0.5,the maximum torque can be achieved,and the optimal split ratio increases with the decrease of slot ratio,as confirmed by the finite element(FE)analyses.Finally,some of predicted results are verified by the measured results of 6s/2p prototype motor with 0.5 slot ratio.

Temperature Field Analysis of Mine Flameproof Outer Rotor Permanent Magnet Synchronous Motor with Different Cooling Schemes

Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling schemes of air cooling and water cooling are calculated respectively.For the structure I air cooling system,the influence of different number of heat sink on the maximum temperature rise and pressure drop of fluid channel is analyzed,and the parameters of heat sink are optimized.For the structure II air cooling system,the influence of setting fillet at the turn back of the fluid channel on the head loss in the fluid domain of the motor is analyzed,and the influence of different fillet radius on the head loss and the maximum temperature rise in the fluid domain is obtained.For the structure II water cooling system,the influence of different water flow speed on the maximum temperature rise of the motor is analyzed,and the influence of different assembly clearance of modular stator teeth and yoke on the maximum temperature rise of the motor is analyzed.The cooling effect and temperature rise distribution characteristics of the three cooling schemes are compared and analyzed.Finally,a water-cooled prototype is manufactured,and the temperature rise experiment is carried out,and the influence of the thermal deformation of fluid channel,stator yoke and stator teeth on the maximum temperature of the motor is analyzed.The results show that the calculated temperature field after considering the thermal deformation is closer to the experimental value,which verifies the accuracy of the calculation results,It also provides a reference for the selection and design of the cooling structure of the same type of PMSM electric roller.

Characteristics of permanent magnet linear synchronous motor fed by spwm inverter based on field-circuit coupled method

Presented field-circuit coupled adaptive time-stepping finite element method to study on permanent magnet linear synchronous motor (PMLSM) characteristics fed by SPWM voltage source inverter.In air-gap field where the direction or magnitude of the field is changing rapidly,the smallest elements are demanded due to high accuracy to use adaptive meshing technique.The co-simulation was used with the status space functions and time-step finite element functions,in which time-step of the status space functions was the smallest than finite element functions'.The magnitude relation of the normal elec- tromagnetic force and tangential electromagnetic force and the period were attained,and current curve was very abrupt at current zero area due to the bigger resistance and leak- age reactance,including main characteristics of motor voltage and velocity.The simulation results compare triumphantly with the experiments results.

Temperature Research of Permanent Magnet Brushless DC Motor for Electric Balanced Vehicle

A power system structure composed of a brushless DC motor and a cycloidal reducer for electric balanced vehicle has been proposed, and the temperature of important components in this structure would be discussed. The loss generated by the cycloid reducer is negligible, it’s only need to analyze the thermal field of motor. Since the temperature change will affect the material properties of the target motor, the electromagnetic and temperature fields, involved in the motor, are selected for coupling calculation to determine whether the final temperature distribution can meet the requirements of vehicle for use.

Development and Analysis of the Magnetic Circuit on Double-Radial Permanent Magnet and Salient-Pole Electromagnetic Hybrid Excitation Generator for Vehicles

With the improvement of vehicles electrical equipment, the existing silicon rectification generator and permanent magnet generator cannot meet the requirement of the electric power consumption of the modern vehicles electrical equipment. It is di cult to adjust the air gap magnetic field of the permanent magnet generator. Consequently, the output voltage is not stable. The silicon rectifying generator has the problems of low e ciency and high failure rate.In order to solve these problems, a new type of hybrid excitation generator is developed in this paper. The developed hybrid excitation generator has a double-radial permanent magnet, a salient-pole electromagnetic combined rotor,and a fractional slot winding stator, where each rotor pole corresponds to 4.5 stator teeth. The equivalent magnetic circuit diagram of permanent magnet rotor and magnetic rotor is established. Magnetic field finite element analysis(FEA) software is used to conduct the modeling and simulation analysis on double-radial permanent magnet magnetic field, salient-pole electro-magnetic magnetic field and hybrid magnetic field. The magnetic flux density mold value diagram and vector diagram are obtained. The diagrams are used to verify the feasibility of this design. The designed electromagnetic coupling regulator controller can ensure the stable voltage export by changing the magnitude and direction of the excitation current to adjust the size of the air gap magnetic field. Therefore, the problem of output voltage instability in the wide speed range and wide load range of the hybrid excitation generator is solved.

A Sensor-less Surface Mounted PMSM for Electronic Speed Control in Multilevel Inverter

Recent advancements in power electronics technology evolves inverter fed electric motors.Speed signals and rotor position are essential for controlling an electric motor accurately.In this paper,the sensorless speed control of surface-mounted permanent magnet synchronous motor(SPMSM)has been attempted.SPMSM wants a digital inverter for its precise working.Hence,this study incor-poratesfifteen level inverter to the SPMSM.A sliding mode observer(SMO)based sensorless speed control scheme is projected to determine rotor spot and speed of the multilevel inverter(MLI)fed SPMSM.MLI has been operated using a multi carrier pulse width modulation(MCPWM)strategy for generation offif-teen level voltages.The simulation works are executed with MATLAB/SIMU-LINK software.The steadiness and the heftiness of the projected model have been investigated under no loaded and loaded situations of SPMSM.Furthermore,the projected method can be adapted for electric vehicles.

基于磁热耦合法的非对称混合磁极永磁电机热分析

针对传统内置永磁电机损耗高、发热量大的问题,提出非对称混合磁极永磁电机拓扑结构.介绍非对称混合磁极永磁电机的拓扑结构,对比分析两者的电磁特性与损耗分布特性.针对非对称混合磁极永磁电机分布式绕组的结构特点,对绕组进行等效处理,确定等效导热系数,建立集中参数热网络模型.建立单向磁热耦合模型,计算电机各部件的温度分布,验证了热网络模型的正确性.考虑到温度对永磁材料的影响,建立双向磁热耦合模型,对比分析不同电流密度对电机温升的影响规律.试制一台样机并搭建温升试验平台进行温升试验,验证了新型拓扑结构的有效性与合理性以及磁热双向耦合法计算结果的准确性.

一种自适应扩展卡尔曼滤波的永磁同步电机无位置传感器矢量控制

在粗差干扰或噪声统计偏差情况下,扩展卡尔曼滤波(EKF)对永磁同步电机(PMSM)的速度和转子位置估计存在精度下降问题,为此提出一种基于新息序列的自适应扩展卡尔曼滤波算法(AEKF)。首先,将粗差干扰加入系统观测方程中,分析粗差干扰对系统观测精度的影响。其次,为增强算法的抗扰性能,在新息协方差计算中设置加权系数,通过调整临近时刻的新息协方差阵权重,计算出新息协方差值,并更新到卡尔曼增益的计算。最后,建立AEKF数学模型,并对比粗差干扰与噪声统计出现偏差情况下,AEKF与EKF两种策略的观测性能。仿真和实验结果表明,在粗差干扰或噪声统计信息出现偏差情况下,AEKF算法对永磁同步电机转速的观测具备更强的鲁棒性及更高的预测精度。

基于自抗扰的永磁同步电机附加谐波损耗抑制方法

针对永磁同步电机在变频器供电时,由时间电流谐波所引起的附加谐波损耗过大及难以在电机初始设计时被考虑到的问题,采用场路耦合联合仿真模型来计算电机的附加谐波损耗,并以4台现有的表贴式永磁同步电机为例,通过实验验证了场路耦合联合仿真模型的有效性,为电机设计之初附加谐波损耗的选取,以及后续温升的计算提供了前期计算的方法。同时提出一种基于自抗扰技术的附加谐波损耗抑制方法,设计一种适用于永磁同步电机矢量控制的自抗扰控制器,并从理论上验证了自抗扰控制器对于时间电流谐波的抑制作用,以及针对自抗扰控制器参数众多调参困难的问题,给出一种参数整定方案。最后通过引入所设计的自抗扰控制器,对电机的时间电流谐波进行计算和分析,使电机的附加谐波损耗降低了68.1%,为同类型电机的附加谐波损耗抑制提供了一种有效的方法。

基于滑模观测器的高速PMSM无传感器控制

针对基于饱和函数滑模观测器方法存在调节参数多及低通滤波器带来的相位延迟问题,研究一种基于超螺旋算法的滑模观测器无传感器控制策略,通过理论推导及系统稳定性分析,设计了一种滑模系数根据转速变化在线调节的自适应滑模系数算法。通过实验验证了该方法相比于基于饱和函数滑模观测器,能在较宽速度范围内有效地抑制抖振,提高了无传感器控制系统的估计精度,简化了参数调节过程及滤波器设计环节。

PMSM无模型滑模转速无差拍电流预测控制

针对传统永磁电机调速系统易受到参数摄动影响而导致控制精度下降的问题,提出一种基于扩张状态观测器(ESO)的永磁同步电机(PMSM)无模型滑模转速无差拍电流预测控制策略。首先用参数摄动下的PMSM调速系统数学模型归纳出系统对应的超局部模型,然后结合无差拍预测控制思想设计了电流环控制器,采用两步预测算法解决了传统无差拍算法存在的延时问题,并且提出校正算法进一步抑制实际的预测误差;利用变速率指数滑模趋近率设计了新型无模型滑模速度控制器,减弱抖振的同时提高了系统响应速度;并设计ESO对参数失配和扰动进行估计和补偿。最后,通过仿真与半实物实验验证了所提控制策略的有效性。

无人机17kW电机振动噪声分析与巡航转速下尖端噪声优化

随着无人机的迅速发展,噪声问题影响消费者体验及AI交互、语音识别等技术,限制了无人机应用潜力。该文针对一台17 kW无人机用外转子永磁同步电机进行研究。为降低电机尖端振动噪声,且保留原电机电磁性能,重点提出优化磁极和定子开槽的方法。具体以平均转矩、转矩脉动等作为约束条件,构建多目标优化数学模型,并利用混合粒子群优化算法求解。该文深入探讨磁极参数、定子开槽对低阶次径向气隙磁通密度空间谐波特征的影响。并对电机转子模态仿真,以研究径向电磁力与空间模态的作用机理。在多转速情况下,以巡航转速为重点,分析整体电机电磁振动噪声特征。最后,仿真和实验结果表明,电机在巡航转速下的尖端噪声显著减小。验证了优化结构对无人机电机尖端振动噪声有明显抑制作用,对解决无人机噪声问题具有重要意义。

转子温度空间分布差异诱发永磁电机局部失磁特性研究

永磁材料磁特性受工作温度影响较大,高工作温度下存在的不可逆失磁现象是永磁电机高可靠性设计的主要瓶颈。针对内置式磁路结构的高功率密度永磁电机用钕铁硼永磁材料的不可逆失磁问题,基于电机全域空间损耗、温度分布的差异,该文提出一种永磁体局部失磁分析模型与特性计算方法。通过磁体虚拟分块法建立基于温度、退磁率等变量的永磁材料磁特性分析模型,利用电磁场和温度场双向耦合的三维多物理场计算方法,得到电机转子永磁体损耗、温度和局部失磁的空间分布特性。最后,通过对一台115 kW、8极永磁电机样机转子永磁体温度和转子表面磁场的实验测试,验证了分析模型与计算方法的准确性,为永磁电机局部失磁问题研究及精细化防失磁设计提供依据。

表贴式永磁同步电机无位置传感器零低速起动方法的比较研究

由于运行在中高速状态下的永磁同步电机无位置传感器控制方式大多是采用反电动势来估算角度位置和转速,这在零低速往往不适用。为了实现表贴式永磁同步电机无位置传感器零低速起动和平滑切换到中高速运行,分析了恒压频比控制、恒流频比控制、脉振电压信号高频注入法三种低速起动控制方法。开环恒压频比控制采用了新的V/F曲线和电压补偿,近似补偿定子阻抗压降防止起动失败;单闭环IF控制和双闭环脉振高频电压注入控制采用加权算法切换至滑模观测器。对某一表贴式永磁同步电机应用Matlab/Simulink进行了永磁同步电机无位置传感器控制系统的仿真分析,仿真结果验证了所提出方法的有效性。