A torque distribution strategy was designed by using fuzzy logic to realize the optimal control. The vehicle load zones were dynamically divided into several zones by several torque lines to indicate the drivers deman...A torque distribution strategy was designed by using fuzzy logic to realize the optimal control. The vehicle load zones were dynamically divided into several zones by several torque lines to indicate the drivers demand and the high or low efficient operating areas of the diesel engine. The fuzzy logic controller with trapezoid membership function and Mamdani rule reference mechanism was utilized. There are over 100 rules used in this fuzzy-based torque distribution strategy which are sorted into four rule-bases. The fuel economy and acceleration tests were designed to test and validate the integrated starter/generator (ISG) bus perfor-mance using fuzzy-based torque distribution strategy. The fuel economy is improved 7.7% compared with the rule-based strategy. Finally the road test results reveal that there is about 15% improvement of fuel economy. And the 0-50 km/h acceleration time is 9.5% shorter than the original bus.展开更多
The high-speed simulation of large-scale offshore wind farms(OWFs) preserving the internal machine information has become a huge challenge due to the large wind turbine(WT) count and microsecond-range time step. Hence...The high-speed simulation of large-scale offshore wind farms(OWFs) preserving the internal machine information has become a huge challenge due to the large wind turbine(WT) count and microsecond-range time step. Hence, it is undoable to investigate the internal node information of the OWF in the electro-magnetic transient(EMT) programs. To fill this gap,this paper presents an equivalent modeling method for largescale OWF, whose accuracy and efficiency are guaranteed by integrating the individual devices of permanent magnet synchronous generator(PMSG) based WT. The node-elimination algorithm is used while the internal machine information is recursively updated. Unlike the existing aggregation methods, the developed EMT model can reflect the characteristics of each WT under different wind speeds and WT parameters without modifying the codes. The access to each WT controller is preserved so that the time-varying dynamics of all the WTs could be simulated. Comparisons of the proposed model with the detailed model in PSCAD/EMTDC have shown very high precision and high efficiency. The proposed modeling procedures can be used as reference for other types of WTs once the structures and parameters are given.展开更多
To improve the heat dissipation performance,this paper proposes a novel hybrid cooling method for high-speed high-power Permanent Magnet assisted Synchronous Reluctance Starter/Generator(PMa Syn R S/G)in aerospace app...To improve the heat dissipation performance,this paper proposes a novel hybrid cooling method for high-speed high-power Permanent Magnet assisted Synchronous Reluctance Starter/Generator(PMa Syn R S/G)in aerospace applications.The hybrid cooling structure with oil circulation in the housing,oil spray at winding ends and rotor end surface is firstly proposed for the PMa Syn R S/G.Then the accurate loss calculation of the PMa Syn R S/G is proposed,which includes air gap friction loss under oil spray cooling,copper loss,stator and rotor core loss,permanent magnet eddy current loss and bearing loss.The parameter sensitivity analysis of the hybrid cooling structure is proposed,while the equivalent thermal network model of the PMa Syn R S/G is established considering the uneven spraying at the winding ends.Finally,the effectiveness of the proposed hybrid cooling method is demonstrated on a 40 k W/24000 r/min PMa Syn R S/G experimental platform.展开更多
The stator flux and electromagnetic torque observation is the basis of direct torque controlled permanent magnet synchronous motor( PMSM) drive system. However,the traditional stator flux observer based on voltage mod...The stator flux and electromagnetic torque observation is the basis of direct torque controlled permanent magnet synchronous motor( PMSM) drive system. However,the traditional stator flux observer based on voltage model is affected by integral initial values and integral drift,that based on current model is affected by the parameters of PMSM,so a new stator flux observation method is proposed based on an improved secondorder generalized integrator( SOGI). Compared to the stator flux observation method based on the conventional SOGI,the proposed method can not only overcome the influence of integral initial values and integral drift,but also completely eliminate the DC offset's influence. Therefore,the observation accuracy of stator flux is further improved. The simulation and experimental results both show that the proposed method has a higher stator flux and electromagnetic torque observation precision.展开更多
More Electrical Aircraft(MEA)which replaces the hydraulic and pneumatic power by electrical power leads to reducing emissions and fuel consumption.The MEA concept has led to a growing use of the starter/generator(S/G)...More Electrical Aircraft(MEA)which replaces the hydraulic and pneumatic power by electrical power leads to reducing emissions and fuel consumption.The MEA concept has led to a growing use of the starter/generator(S/G)system.Permanent magnet(PM)machines have been gaining interests for aircraft S/G system application over the last few years.This is mainly due to the several advantages,including high power density,high efficiency and high speed ability.The shortcoming of the PM machines is the de-excitation problem in case of a failure,which is a main issue for the aircraft application.However,by using a PM machine with high reactance or multiphase configuration,the fault-tolerant ability can be improved.In terms of the aircraft S/G system,this paper is going to present a comprehensive analysis of PM machines.Firstly,the state-of-the-art of PM starter/generator(PMS/G)is summarized and the basic structure of PMS/G system is analyzed.Next,key technologies of the PMS/G system are summarized and analyzed.Finally,a flux weakening fault protection strategy that is used to suppress the turn-to-turn short circuit(SC)current is studied,simulated and verified.With the breakthrough of key technologies based on the development of high temperature electromagnetic material and high temperature power electronics,the PMS/G will be a potential candidate for aircraft S/G system including the embedded power generation system.展开更多
为提高混合动力汽车(hybrid electric vehicle,HEV)起动发电一体化(integrated starter and generator,ISG)系统用电源的工作性能,提出了一种由超级电容器与蓄电池直接并联,并通过双向DC-DC功率变换器向ISG升压供电的低压复合电源方案,...为提高混合动力汽车(hybrid electric vehicle,HEV)起动发电一体化(integrated starter and generator,ISG)系统用电源的工作性能,提出了一种由超级电容器与蓄电池直接并联,并通过双向DC-DC功率变换器向ISG升压供电的低压复合电源方案,充分利用蓄电池比能量大和超级电容器比功率大的性能,蓄电池作为能量存储模块主要为车载低压用电设备提供电能,超级电容器作为功率缓冲单元瞬时释放功率和回馈能量,两种电源优势互补,使得ISG系统的起/停控制快、能量再生利用好、动力辅助性强等优越性能可较大程度地得以实现,并增加车载低压蓄电池的使用寿命。仿真结果验证了所提出复合电源的有效性。展开更多
文摘A torque distribution strategy was designed by using fuzzy logic to realize the optimal control. The vehicle load zones were dynamically divided into several zones by several torque lines to indicate the drivers demand and the high or low efficient operating areas of the diesel engine. The fuzzy logic controller with trapezoid membership function and Mamdani rule reference mechanism was utilized. There are over 100 rules used in this fuzzy-based torque distribution strategy which are sorted into four rule-bases. The fuel economy and acceleration tests were designed to test and validate the integrated starter/generator (ISG) bus perfor-mance using fuzzy-based torque distribution strategy. The fuel economy is improved 7.7% compared with the rule-based strategy. Finally the road test results reveal that there is about 15% improvement of fuel economy. And the 0-50 km/h acceleration time is 9.5% shorter than the original bus.
基金supported by the National Natural Science Foundation of China (No. 52277094)Science and Technology Project of China Huaneng Group Co.,Ltd.(No. HNKJ20-H88)。
文摘The high-speed simulation of large-scale offshore wind farms(OWFs) preserving the internal machine information has become a huge challenge due to the large wind turbine(WT) count and microsecond-range time step. Hence, it is undoable to investigate the internal node information of the OWF in the electro-magnetic transient(EMT) programs. To fill this gap,this paper presents an equivalent modeling method for largescale OWF, whose accuracy and efficiency are guaranteed by integrating the individual devices of permanent magnet synchronous generator(PMSG) based WT. The node-elimination algorithm is used while the internal machine information is recursively updated. Unlike the existing aggregation methods, the developed EMT model can reflect the characteristics of each WT under different wind speeds and WT parameters without modifying the codes. The access to each WT controller is preserved so that the time-varying dynamics of all the WTs could be simulated. Comparisons of the proposed model with the detailed model in PSCAD/EMTDC have shown very high precision and high efficiency. The proposed modeling procedures can be used as reference for other types of WTs once the structures and parameters are given.
基金co-supported by the National Natural Science Foundation of China(No.52177028)in part by the Aeronautical Science Foundation of China(No.201907051002)。
文摘To improve the heat dissipation performance,this paper proposes a novel hybrid cooling method for high-speed high-power Permanent Magnet assisted Synchronous Reluctance Starter/Generator(PMa Syn R S/G)in aerospace applications.The hybrid cooling structure with oil circulation in the housing,oil spray at winding ends and rotor end surface is firstly proposed for the PMa Syn R S/G.Then the accurate loss calculation of the PMa Syn R S/G is proposed,which includes air gap friction loss under oil spray cooling,copper loss,stator and rotor core loss,permanent magnet eddy current loss and bearing loss.The parameter sensitivity analysis of the hybrid cooling structure is proposed,while the equivalent thermal network model of the PMa Syn R S/G is established considering the uneven spraying at the winding ends.Finally,the effectiveness of the proposed hybrid cooling method is demonstrated on a 40 k W/24000 r/min PMa Syn R S/G experimental platform.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51377041)
文摘The stator flux and electromagnetic torque observation is the basis of direct torque controlled permanent magnet synchronous motor( PMSM) drive system. However,the traditional stator flux observer based on voltage model is affected by integral initial values and integral drift,that based on current model is affected by the parameters of PMSM,so a new stator flux observation method is proposed based on an improved secondorder generalized integrator( SOGI). Compared to the stator flux observation method based on the conventional SOGI,the proposed method can not only overcome the influence of integral initial values and integral drift,but also completely eliminate the DC offset's influence. Therefore,the observation accuracy of stator flux is further improved. The simulation and experimental results both show that the proposed method has a higher stator flux and electromagnetic torque observation precision.
基金This work was supported in part by National Natural Science Foundation for Excellent Young Scholar of China under Award 51622704Jiangsu Provincial Science Funds for Distinguished Young Scientists under Award BK20150033.
文摘More Electrical Aircraft(MEA)which replaces the hydraulic and pneumatic power by electrical power leads to reducing emissions and fuel consumption.The MEA concept has led to a growing use of the starter/generator(S/G)system.Permanent magnet(PM)machines have been gaining interests for aircraft S/G system application over the last few years.This is mainly due to the several advantages,including high power density,high efficiency and high speed ability.The shortcoming of the PM machines is the de-excitation problem in case of a failure,which is a main issue for the aircraft application.However,by using a PM machine with high reactance or multiphase configuration,the fault-tolerant ability can be improved.In terms of the aircraft S/G system,this paper is going to present a comprehensive analysis of PM machines.Firstly,the state-of-the-art of PM starter/generator(PMS/G)is summarized and the basic structure of PMS/G system is analyzed.Next,key technologies of the PMS/G system are summarized and analyzed.Finally,a flux weakening fault protection strategy that is used to suppress the turn-to-turn short circuit(SC)current is studied,simulated and verified.With the breakthrough of key technologies based on the development of high temperature electromagnetic material and high temperature power electronics,the PMS/G will be a potential candidate for aircraft S/G system including the embedded power generation system.
文摘为提高混合动力汽车(hybrid electric vehicle,HEV)起动发电一体化(integrated starter and generator,ISG)系统用电源的工作性能,提出了一种由超级电容器与蓄电池直接并联,并通过双向DC-DC功率变换器向ISG升压供电的低压复合电源方案,充分利用蓄电池比能量大和超级电容器比功率大的性能,蓄电池作为能量存储模块主要为车载低压用电设备提供电能,超级电容器作为功率缓冲单元瞬时释放功率和回馈能量,两种电源优势互补,使得ISG系统的起/停控制快、能量再生利用好、动力辅助性强等优越性能可较大程度地得以实现,并增加车载低压蓄电池的使用寿命。仿真结果验证了所提出复合电源的有效性。
