In order to solve the problem of urban surface runoff,it is necessary to study permeable brick deeply.Tensile test and DMA test were used to study the binder material of permeable brick,and a material with the best me...In order to solve the problem of urban surface runoff,it is necessary to study permeable brick deeply.Tensile test and DMA test were used to study the binder material of permeable brick,and a material with the best mechanical properties was selected as the binder of resin based permeable brick;The permeable brick with single gradation and continuous gradation and porosity of 0.1–0.5 gradient is constructed by 3D modeling method.The particle composition and the seepage simulation results of permeable brick under different design parameters were analyzed;A resin-based permeable brick with micro-pores was prepared using the selected binder and desert sand with high roundness as aggregate,and compared with the simulation,its water permeability coefficient is 3.25×10-2 cm/s and the compressive strength is 36.19 MPa.In the seepage simulation of permeable brick,it is known that with the increase of gradation width“value i”,the water permeability coefficient increases.Therefore,in order to control the number of aggregate particles and obtain better seepage performance,the wide gradation of i≥4 and the design porosity of 0.3–0.4 should be considered.This study provides a research basis and a simulation method for the component optimization of resin based permeable brick.展开更多
文摘In order to solve the problem of urban surface runoff,it is necessary to study permeable brick deeply.Tensile test and DMA test were used to study the binder material of permeable brick,and a material with the best mechanical properties was selected as the binder of resin based permeable brick;The permeable brick with single gradation and continuous gradation and porosity of 0.1–0.5 gradient is constructed by 3D modeling method.The particle composition and the seepage simulation results of permeable brick under different design parameters were analyzed;A resin-based permeable brick with micro-pores was prepared using the selected binder and desert sand with high roundness as aggregate,and compared with the simulation,its water permeability coefficient is 3.25×10-2 cm/s and the compressive strength is 36.19 MPa.In the seepage simulation of permeable brick,it is known that with the increase of gradation width“value i”,the water permeability coefficient increases.Therefore,in order to control the number of aggregate particles and obtain better seepage performance,the wide gradation of i≥4 and the design porosity of 0.3–0.4 should be considered.This study provides a research basis and a simulation method for the component optimization of resin based permeable brick.
