In this study,current-induced partial magnetization-based switching was realized through the spin–orbit torque(SOT)in single-layer L1_(0) FePt with a perpendicular anisotropy(K_(u⊥))of 1.19×10^(7) erg·cm^(...In this study,current-induced partial magnetization-based switching was realized through the spin–orbit torque(SOT)in single-layer L1_(0) FePt with a perpendicular anisotropy(K_(u⊥))of 1.19×10^(7) erg·cm^(-3)(1 erg·cm^(-3)=0.1 J·m^(-3)),and its corresponding SOT efficiency(βDL)was 8×10^(-6) Oe·(A·cm^(-2))^(-1)(1 Oe=79.57747 A·m^(-1)),which is several times higher than that of the traditional Ta/CoFeB/MgO structure reported in past work.The SOT in the FePt films originated from the structural inversion asymmetry in the FePt films since the dislocations and defects were inhomogeneously distributed within the samples.Furthermore,the FePt grown on MgO with a granular structure had a larger effective SOT field and effi-ciency than that grown on SrTiO_(3)(STO)with a continuous structure.The SOT efficiency was found to be considerably dependent on not only the sputtering temperature-induced chemical ordering but also the lattice mismatch-induced evolution of the microstructure.Our findings can provide a useful means of efficiently electrically controlling a magnetic bit that is highly thermally stable via SOT.展开更多
We have investigated the magnetism of one-dimensional dipolar-interaction spin chains with perpendicular anisotropy by simulation. The behaviors of the magnetizations and the orientation correlations change dramatical...We have investigated the magnetism of one-dimensional dipolar-interaction spin chains with perpendicular anisotropy by simulation. The behaviors of the magnetizations and the orientation correlations change dramatically as the anisotropy increases to the critical value. The domain length can be controlled by adjusting the temperature and the external field as well as the anisotropy. These properties are interesting and arise from the competition between the anisotropy and the interaction along the chain.展开更多
The perpendicular anisotopy,coercivity and Kerr rotation angle of the amorphous Tb_(32)Fe_(54)Co_(14) films were studied.The X-ray,electron diffraction,XPS and AES profile con- firmed that no obvious change in their a...The perpendicular anisotopy,coercivity and Kerr rotation angle of the amorphous Tb_(32)Fe_(54)Co_(14) films were studied.The X-ray,electron diffraction,XPS and AES profile con- firmed that no obvious change in their amorphous structure and oxygen concentration is ob- served after annealing at 100℃,while their properties alter evidently under bending stress.It seems to be believed that the perpendicular anisotropy in the Tb_(32)Fe_(54)Co_(14) films mainly arises from the induced stress during preparation and the magnetostriction coupling stress,as well as,the thermal instability of the film relates closely to the stress relaxation during annealing.展开更多
(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constan...(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.展开更多
In a magnetic nanostripe, the effects of perpendicular magnetic anisotropy(PMA) on the current-driven horizontal motion of vortex wall along the stripe and the vertical motion of the vortex core are studied by micro...In a magnetic nanostripe, the effects of perpendicular magnetic anisotropy(PMA) on the current-driven horizontal motion of vortex wall along the stripe and the vertical motion of the vortex core are studied by micromagnetic simulations.The results show that the horizontal and vertical motion can generally be monotonously enhanced by PMA. However, when the current is small, a nonmonotonic phenomenon for the horizontal motion is found. Namely, the velocity of the horizontal motion firstly decreases and then increases with the increase of the PMA. We find that the reason for this is that the PMA can firstly increase and then decrease the confining force induced by the confining potential energy. In addition, the PMA always enhances the driving force induced by the current.展开更多
We demonstrate that radio frequency(RF)magnetron sputtering technique can modify the perpendicular magnetic anisotropy(PMA)of Pt/Co/normal metal(NM)thin films.Influence of ion irradiation during RF magnetron sputterin...We demonstrate that radio frequency(RF)magnetron sputtering technique can modify the perpendicular magnetic anisotropy(PMA)of Pt/Co/normal metal(NM)thin films.Influence of ion irradiation during RF magnetron sputtering should not be neglected and it can weaken PMA of the deposited magnetic films.The magnitude of this influence can be controlled by tuning RF magnetron sputtering deposition conditions and the upper NM layer thickness.According to the stopping and range of ions in matter(SRIM)simulation results,defects such as displacement atoms and vacancies in the deposited film will increase after the RF magnetron sputtering,which can account for the weakness of PMA.The amplitude changes of the Hall resistance and the threshold current intensity of spin orbit torque(SOT)induced magnetization switching also can be modified.Our study could be useful for controlling magnetic properties of PMA films and designing new type of SOT-based spintronic devices.展开更多
Microstructures and magnetic properties of Ta/Pt/Co 2 FeAl(CFA)/MgO multilayers are studied to understand perpendicular magnetic anisotropy(PMA) of half-metallic full-Heusler alloy films.PMA is realized in a 2.5-n...Microstructures and magnetic properties of Ta/Pt/Co 2 FeAl(CFA)/MgO multilayers are studied to understand perpendicular magnetic anisotropy(PMA) of half-metallic full-Heusler alloy films.PMA is realized in a 2.5-nm CFA film with B2-ordered structure observed by a high resolution transmission electron microscope.It is demonstrated that a high quality interface between the ferromagnetic layer and oxide layer is not essential for PMA.The conversions between in-plane anisotropy and PMA are investigated to study the dependence of magnetic moment on temperature.At the intersection points,the decreasing slope of the saturation magnetization(M s) changes because of the conversions.The dependence of M s on the annealing temperature and MgO thickness is also studied.展开更多
We systematically investigated the Ni and Co thickness-dependent perpendicular magnetic anisotropy(PMA)coefficient,magnetic domain structures,and magnetization dynamics of Pt(5 nm)/[Co(t_(Co))/Ni(t_(Ni))]_(5)/Pt(1 nm)...We systematically investigated the Ni and Co thickness-dependent perpendicular magnetic anisotropy(PMA)coefficient,magnetic domain structures,and magnetization dynamics of Pt(5 nm)/[Co(t_(Co))/Ni(t_(Ni))]_(5)/Pt(1 nm)multilayers by combining the four standard magnetic characterization techniques.The magnetic-related hysteresis loops obtained from the field-dependent magnetization M and anomalous Hall resistivity(AHR)ρxy showed that the two serial multilayers with t_(Co)=0.2 nm and 0.3 nm have the optimum PMA coefficient K_(U) as well as the highest coercivity H_(C) at the Ni thickness t_(Ni)=0.6 nm.Additionally,the magnetic domain structures obtained by magneto-optic Kerr effect(MOKE)microscopy also significantly depend on the thickness and K_(U) of the films.Furthermore,the thickness-dependent linewidth of ferromagnetic resonance is inversely proportional to K_(U) and H_(C),indicating that inhomogeneous magnetic properties dominate the linewidth.However,the intrinsic Gilbert damping constant determined by a linear fitting of the frequency-dependent linewidth does not depend on the Ni thickness and K_(U).Our results could help promote the PMA[Co/Ni]multilayer applications in various spintronic and spin-orbitronic devices.展开更多
Electric-field control of perpendicular magnetic anisotropy(PMA) is a feasible way to manipulate perpendicular magnetization,which is of great importance for realizing energy-efficient spintronics.Here,we propose a no...Electric-field control of perpendicular magnetic anisotropy(PMA) is a feasible way to manipulate perpendicular magnetization,which is of great importance for realizing energy-efficient spintronics.Here,we propose a novel approach to accomplish this task at room temperature by resistive switching(RS) via electrochemical metallization(ECM) in a device with the stack of Si/SiO_(2)/Ta/Pt/Ag/Mn-doped ZnO(MZO)/Pt/Co/Pt/ITO.By applying certain voltages,the device could be set at high-resistance-state(HRS) and low-resistance-state(LRS),accompanied with a larger and a smaller coercivity(H_(C)),respectively,which demonstrates a nonvolatile E-field control of PMA.Based on our previous studies and the present control experiments,the electric modulation of PMA can be briefly explained as follows.At LRS,the Ag conductive filaments form and pass through the entire MZO layer and finally reach the Pt/Co/Pt sandwich,leading to weakening of PMA and reduction of H_(C).In contrast,at HRS,most of the Ag filaments dissolve and leave away from the Pt/Co/Pt sandwich,causing partial recovery of PMA and an increase of H_(C).This work provides a new clue to designing low-power spintronic devices based on PMA films.展开更多
Yttrium iron garnet(YIG) films possessing both perpendicular magnetic anisotropy(PMA) and low damping would serve as ideal candidates for high-speed energy-efficient spintronic and magnonic devices.However,it is still...Yttrium iron garnet(YIG) films possessing both perpendicular magnetic anisotropy(PMA) and low damping would serve as ideal candidates for high-speed energy-efficient spintronic and magnonic devices.However,it is still challenging to achieve PMA in YIG films thicker than 20 nm,which is a major bottleneck for their development.In this work,we demonstrate that this problem can be solved by using substrates with moderate lattice mismatch with YIG so as to suppress the excessive strain-induced stress release as increasing the YIG thickness.After carefully optimizing the growth and annealing conditions,we have achieved out-of-plane spontaneous magnetization in YIG films grown on sGGG substrates,even when they are as thick as 50 nm.Furthermore,ferromagnetic resonance and spin pumping induced inverse spin Hall effect measurements further verify the good spin transparency at the surface of our YIG films.展开更多
Compensated ferrimagnetic insulators are particularly interesting for enabling functional spintronic,optical,and microwave devices.Among many different garnets,Gd_(3)Fe_(5)O_(12)(GdIG)is a representative compensated f...Compensated ferrimagnetic insulators are particularly interesting for enabling functional spintronic,optical,and microwave devices.Among many different garnets,Gd_(3)Fe_(5)O_(12)(GdIG)is a representative compensated ferrimagnetic insulator.In this paper,we will study the evolution of the surface morphology,the magnetic properties,and the magnetization compensation through changing the following parameters:the annealing temperature,the growth temperature,the annealing duration,and the choice of different single crystalline garnet substrates.Our objective is to find the optimized growth condition of the GdIG films,for the purpose of achieving a strong perpendicular magnetic anisotropy(PMA)and a flat surface,together with a small effective damping parameter.Through our experiments,we have found that the surface roughness approaching 0.15 nm can be obtained by choosing the growth temperature around 700℃,together with an enhanced PMA.We have also found the modulation of magnetic anisotropy by choosing different single crystalline garnet substrates which change the tensile strain to the compressive strain.A measure of the effective magnetic damping parameter(α_(eff)=0.04±0.01)through a spin pumping experiment in a GdIG/Pt bilayer is also made.Through optimizing the growth dynamics of GdIG films,our results could be useful for synthesizing garnet films with a PMA,which could be beneficial for the future development of ferrimagnetic spintronics.展开更多
The dependence of perpendicular magnetic anisotropy (PMA) on the barrier layer MgO thickness in MgO/CoFeB /Ta multilayers is investigated. The results show that the strongest PMA occurs in a small window of about 2 ...The dependence of perpendicular magnetic anisotropy (PMA) on the barrier layer MgO thickness in MgO/CoFeB /Ta multilayers is investigated. The results show that the strongest PMA occurs in a small window of about 2 4nm with the increase of MgO thickness from 1-1Onto. The crystalline degree of MgO and the change of interatomic distance along the out-of-plane direction may be the main reasons for the change of PMA in these multilayers. Moreover, the roughnesses of 2- and 4-nm-thick MgO samples are 3.163 and 1.8 nm, respectively, and both the samples show PMA. These results could be used to tune the magnetic characteristic of the ultra thin CoFeB film for future applications in perpendicular magnetic devices.展开更多
We investigate the dependence of the switching process on the perpendicular magnetic anisotropy (PMA) constant in perpendicular spin transfer torque magnetic tunnel junctions (P-MTJs) using micromagnetic simulatio...We investigate the dependence of the switching process on the perpendicular magnetic anisotropy (PMA) constant in perpendicular spin transfer torque magnetic tunnel junctions (P-MTJs) using micromagnetic simulations. It is found that the final stable states of the magnetization distribution of the free layer after switching can be divided into three different states based on different PMA constants: vortex, uniform, and steady. Different magnetic states can be attributed to a trade-off among demagnetization, exchange, and PMA energies. The generation of the vortex state is also related to the non-uniform stray field from the polarizer, and the final stable magnetization is sensitive to the PMA constant. The vortex and uniform states have different switching processes, and the switching time of the vortex state is longer than that of the uniform state due to hindrance by the vortex.展开更多
The exchange-coupled [Co/Ni]N/Tb Fe nano-magnetic films can display strong perpendicular magnetic anisotropy(PMA) which depends on the Tb:Fe component ratio, Tb Fe layer thickness and the repetition number N of [Co/Ni...The exchange-coupled [Co/Ni]N/Tb Fe nano-magnetic films can display strong perpendicular magnetic anisotropy(PMA) which depends on the Tb:Fe component ratio, Tb Fe layer thickness and the repetition number N of [Co/Ni]Nmultilayer. Perpendicular spin valves in the nano thickness scale, consisting of a [Co/Ni]3free and a [Co/Ni]5/Tb Fe reference multilayer, show high giant magnetoresistance(GMR) signal of 6.5 % and a large switching field difference over3 k Oe. However, unexpected slanting of the free layer magnetization, accompanied by a reduced GMR ratio, was found to be caused by the presence of a thick Fe-rich or even a thin but Tb-rich Tb Fe layer. We attribute this phenomenon to the large magnetostriction effect of Tb Fe which probably induces strong stress acting on the free layer and hence reduces its interfacial PMA.展开更多
Co2FeA10.5Si0.5 (CFAS)-based multilayers sandwiched by MgO layers have been deposited and annealed at different temperatures. Perpendicular magnetic anisotropy (PMA) with the magnetic anisotropy energy density Ku ...Co2FeA10.5Si0.5 (CFAS)-based multilayers sandwiched by MgO layers have been deposited and annealed at different temperatures. Perpendicular magnetic anisotropy (PMA) with the magnetic anisotropy energy density Ku ≈2.5x106 erg/cm3 (1 erg = 10-7 J) and the coercivity He = 363 Oe (10e = 79.9775 A.m-1) has been achieved in the Si/SiO2/MgO (1.5 nm)/CFAS (2.5 nm)/MgO (0.8 nm)/Pt (5 nm) film annealed at 300 ℃. The strong PMA is mainly due to the top MgO layer. The structure can be used as top magnetic electrodes in half-metallic perpendicular magnetic tunnel junctions.展开更多
Pd/Co_(2)MnSi(CMS)/NiFe_(2)O_(4)(NFO)/Pd multilayers were fabricated on F-mica substrate by magnetron sputtering.The best PMA performance of the multilayer structure Pd(3 nm)/CMS(5 nm)/NFO(0.8 nm)/Pd(3 nm)was obtained...Pd/Co_(2)MnSi(CMS)/NiFe_(2)O_(4)(NFO)/Pd multilayers were fabricated on F-mica substrate by magnetron sputtering.The best PMA performance of the multilayer structure Pd(3 nm)/CMS(5 nm)/NFO(0.8 nm)/Pd(3 nm)was obtained by adjusting the thickness of the CMS and NFO layers.F-mica substrate has a flatter surface than glass and Si/SiO_(2) substrate.The magnetic anisotropy energy density(K_(eff))of the sample deposited on F-mica substrates is 0.6711 Merg/cm^(3)(1 erg=10^(-7) J),which is about 30%higher than that of the multilayer films deposited on glass(0.475 Merg/cm^(3))and Si/SiO_(2)(0.511 Merg/cm^(3))substrates,and the R_(Hall) and H_(C) are also significantly increased.In this study,the NFO layer prepared by sputtering in the high purity Ar environment was exposed to the high purity O_(2) atmosphere for 5 min,which can effectively eliminate the oxygen loss and oxygen vacancy in NFO,ensuring enough Co-O orbital hybridization at the interface of CMS/NFO,and thus effectively improve the sample PMA.展开更多
The CoCr/Pt bilayers and (CoCr/Pt)_(20) multilayers with Pt underlayer wereprepared by DC magnetron sputtering. The effects of prepared condition on perpendicular magneticanisotropy were investigated. The results show...The CoCr/Pt bilayers and (CoCr/Pt)_(20) multilayers with Pt underlayer wereprepared by DC magnetron sputtering. The effects of prepared condition on perpendicular magneticanisotropy were investigated. The results show that the thickness of Pt under-layer has a greateffect on the microstructure and perpendicular magnetic anisotropy of CoCr/Pt bilayers and(CoCr/Pt)_(20) multilayers. When the thickness of Pt underlayer increases, Pt(lll) and CoCr(002)peaks of both CoCr/Pt bilayers and (CoCr/Pt)_(20) multilayers increase and the bilayer periodicityof the multilayers is improved. The effective magnetic anisotropy of (CoCr/Pt)_(20) multilayers withPt underlayer was much larger than that of CoCr/Pt bilayers. The (CoCr/Pt)_(20) multilayers has astronger perpendicular magnetic anisotropy than that of CoCr/Pt bilayers. This is ascribed to theinterface magnetic anisotropy of the multilayers.展开更多
A detailed study of the magnetic characterizations of the top structure MgO/CoFeB/Mo is presented.The samples show strong perpendicular magnetic anisotropy(PMA) when the thickness of CoFeB is 0.9 nm and 1.1 nm.The s...A detailed study of the magnetic characterizations of the top structure MgO/CoFeB/Mo is presented.The samples show strong perpendicular magnetic anisotropy(PMA) when the thickness of CoFeB is 0.9 nm and 1.1 nm.The saturation magnetic moment and interface anisotropy constant are 1566 emu/cm3 and 3.75 erg/cm2,respectively.The magnetic dead layer(MDL) is about 0.23 nm in this system.Furthermore,strong capping layer thickness dependence is also observed.The strong PMA of 1.1 nm CoFeB only exists in a Mo cap layer thickness window of 1.2-2 nm.To maintain PMA,the metal layer could not be too thin or thick in these multilayers.The oxidation and diffusion of the metal capping layer should be respectively responsibility for the degradation of PMA in these thin or thick metal capping layer samples.展开更多
(Pt/Co)n/FeMn multilayers with perpendicular anisotropy (PA) were prepared by magnetron sputtering with Pt as the buffer layer and the capping layer. The dependence of perpendicular exchange bias (PEB), Hex, on ...(Pt/Co)n/FeMn multilayers with perpendicular anisotropy (PA) were prepared by magnetron sputtering with Pt as the buffer layer and the capping layer. The dependence of perpendicular exchange bias (PEB), Hex, on the thickness of the FeMn anfiferromagnet (AFM) layer is similar to that of in-plane exchange bias. The value of Hex for the (Pt/Co)3/FeMn multilayer reaches 22.3 kA/m. A thin Pt spacer was inserted between the Co/FeMn interface to enhance PEB. The PEB reaches the largest at 39.8 kA/m when the thickness of the Pt spacer is 0.4 nm.展开更多
Recent progresses in magnetic tunnel junctions with perpendicular magnetic anisotropy (PMA) are reviewed and summarized. At first, the concept and source of perpendicular magnetic anisotropy (PMA) are introduced. ...Recent progresses in magnetic tunnel junctions with perpendicular magnetic anisotropy (PMA) are reviewed and summarized. At first, the concept and source of perpendicular magnetic anisotropy (PMA) are introduced. Next, a historical overview of PMA materials as magnetic electrodes, such as the RE-TM alloys TbFeCo and GdFeCo, novel tetragonal manganese alloys Mn-Ga, L10-ordered (Co, Fe)/Pt alloy, multilayer film [Co, Fe, CoFe/Pt, Pd, Ni, AU]N, and ultra-thin magnetic metal/oxidized barrier is offered. The other part of the article focuses on the optimization and fabrication of CoFeB/MgO/CoFeB p-MTJs, which is thought to have high potential to meet the main demands for non-volatile magnetic random access memory.展开更多
基金supported by National Key Research and Development Program of China (2020AAA0109005)the National Natural Science Foundation of China (61674062, 51501168, 41574175, and 41204083)+3 种基金the Fundamental Research Funds for the Central Universities of the China University of Geosciences (Wuhan) (CUG150632 and CUGL160414)the Fundamental Research Funds for National Universities of the China University of Geosciences (Wuhan)the Interdisciplinary program of Wuhan National High Magnetic Field Center (WHMFC202119)Huazhong University of Science and Technology, and Fund from Shenzhen Virtual University Park (2021Szvup091)
文摘In this study,current-induced partial magnetization-based switching was realized through the spin–orbit torque(SOT)in single-layer L1_(0) FePt with a perpendicular anisotropy(K_(u⊥))of 1.19×10^(7) erg·cm^(-3)(1 erg·cm^(-3)=0.1 J·m^(-3)),and its corresponding SOT efficiency(βDL)was 8×10^(-6) Oe·(A·cm^(-2))^(-1)(1 Oe=79.57747 A·m^(-1)),which is several times higher than that of the traditional Ta/CoFeB/MgO structure reported in past work.The SOT in the FePt films originated from the structural inversion asymmetry in the FePt films since the dislocations and defects were inhomogeneously distributed within the samples.Furthermore,the FePt grown on MgO with a granular structure had a larger effective SOT field and effi-ciency than that grown on SrTiO_(3)(STO)with a continuous structure.The SOT efficiency was found to be considerably dependent on not only the sputtering temperature-induced chemical ordering but also the lattice mismatch-induced evolution of the microstructure.Our findings can provide a useful means of efficiently electrically controlling a magnetic bit that is highly thermally stable via SOT.
基金Supported by the Doctorial Start-up Fund of Bohai University under Grant No.KYC-BSQD200901
文摘We have investigated the magnetism of one-dimensional dipolar-interaction spin chains with perpendicular anisotropy by simulation. The behaviors of the magnetizations and the orientation correlations change dramatically as the anisotropy increases to the critical value. The domain length can be controlled by adjusting the temperature and the external field as well as the anisotropy. These properties are interesting and arise from the competition between the anisotropy and the interaction along the chain.
文摘The perpendicular anisotopy,coercivity and Kerr rotation angle of the amorphous Tb_(32)Fe_(54)Co_(14) films were studied.The X-ray,electron diffraction,XPS and AES profile con- firmed that no obvious change in their amorphous structure and oxygen concentration is ob- served after annealing at 100℃,while their properties alter evidently under bending stress.It seems to be believed that the perpendicular anisotropy in the Tb_(32)Fe_(54)Co_(14) films mainly arises from the induced stress during preparation and the magnetostriction coupling stress,as well as,the thermal instability of the film relates closely to the stress relaxation during annealing.
基金The present work has been partially supported by the Japanese Storage Research ConsortiumSupport by Beijing Science and Technology Nova Project(Grant No.H020821290120)is also appreciated.
文摘(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11247026 and 11374253)
文摘In a magnetic nanostripe, the effects of perpendicular magnetic anisotropy(PMA) on the current-driven horizontal motion of vortex wall along the stripe and the vertical motion of the vortex core are studied by micromagnetic simulations.The results show that the horizontal and vertical motion can generally be monotonously enhanced by PMA. However, when the current is small, a nonmonotonic phenomenon for the horizontal motion is found. Namely, the velocity of the horizontal motion firstly decreases and then increases with the increase of the PMA. We find that the reason for this is that the PMA can firstly increase and then decrease the confining force induced by the confining potential energy. In addition, the PMA always enhances the driving force induced by the current.
基金Project supported by the National Key R&D Program of China(Grant No.2017YFB0405700)the National Natural Science Foundation of China(Grant Nos.11474272 and 61774144)+1 种基金Beijing Natural Science Foundation Key Program,China(Grant No.Z190007)the Chinese Academy of Sciences(Grant Nos.QYZDY-SSW-JSC020,XDB44000000,and XDB28000000)。
文摘We demonstrate that radio frequency(RF)magnetron sputtering technique can modify the perpendicular magnetic anisotropy(PMA)of Pt/Co/normal metal(NM)thin films.Influence of ion irradiation during RF magnetron sputtering should not be neglected and it can weaken PMA of the deposited magnetic films.The magnitude of this influence can be controlled by tuning RF magnetron sputtering deposition conditions and the upper NM layer thickness.According to the stopping and range of ions in matter(SRIM)simulation results,defects such as displacement atoms and vacancies in the deposited film will increase after the RF magnetron sputtering,which can account for the weakness of PMA.The amplitude changes of the Hall resistance and the threshold current intensity of spin orbit torque(SOT)induced magnetization switching also can be modified.Our study could be useful for controlling magnetic properties of PMA films and designing new type of SOT-based spintronic devices.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 50831002,50971025,51071022,and11174031)the National Basic Research Program of China (Grant No. 2012CB932702)+3 种基金the Program for Changjiang Scholars and Innovative Research Team in University (PCSIRT)the Beijing Nova Program (Grant No. 2011031)the Beijing Municipal Natural Science Foundation,China (Grant No. 2102032)the Fundamental Research Funds for the Central Universities
文摘Microstructures and magnetic properties of Ta/Pt/Co 2 FeAl(CFA)/MgO multilayers are studied to understand perpendicular magnetic anisotropy(PMA) of half-metallic full-Heusler alloy films.PMA is realized in a 2.5-nm CFA film with B2-ordered structure observed by a high resolution transmission electron microscope.It is demonstrated that a high quality interface between the ferromagnetic layer and oxide layer is not essential for PMA.The conversions between in-plane anisotropy and PMA are investigated to study the dependence of magnetic moment on temperature.At the intersection points,the decreasing slope of the saturation magnetization(M s) changes because of the conversions.The dependence of M s on the annealing temperature and MgO thickness is also studied.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.11774150,12074178,12004171,12074189,and 51971109)the Applied Basic Research Programs of Science and Technology Commission Foundation of Jiangsu Province,China (Grant No.BK20170627)+2 种基金the National Key Research and Development Program of China (Grant No.2018YFA0209002)the Open Research Fund of Jiangsu Provincial Key Laboratory for Nanotechnologythe Scientific Foundation of Nanjing University of Posts and Telecommunications (NUPTSF) (Grant No.NY220164)。
文摘We systematically investigated the Ni and Co thickness-dependent perpendicular magnetic anisotropy(PMA)coefficient,magnetic domain structures,and magnetization dynamics of Pt(5 nm)/[Co(t_(Co))/Ni(t_(Ni))]_(5)/Pt(1 nm)multilayers by combining the four standard magnetic characterization techniques.The magnetic-related hysteresis loops obtained from the field-dependent magnetization M and anomalous Hall resistivity(AHR)ρxy showed that the two serial multilayers with t_(Co)=0.2 nm and 0.3 nm have the optimum PMA coefficient K_(U) as well as the highest coercivity H_(C) at the Ni thickness t_(Ni)=0.6 nm.Additionally,the magnetic domain structures obtained by magneto-optic Kerr effect(MOKE)microscopy also significantly depend on the thickness and K_(U) of the films.Furthermore,the thickness-dependent linewidth of ferromagnetic resonance is inversely proportional to K_(U) and H_(C),indicating that inhomogeneous magnetic properties dominate the linewidth.However,the intrinsic Gilbert damping constant determined by a linear fitting of the frequency-dependent linewidth does not depend on the Ni thickness and K_(U).Our results could help promote the PMA[Co/Ni]multilayer applications in various spintronic and spin-orbitronic devices.
基金Project supported by the National Key Research and Development Program of China (Grant No. 2022YFA1403602)the National Natural Science Foundation of China (Grant Nos. 51971109, 52025012, and 52001169)。
文摘Electric-field control of perpendicular magnetic anisotropy(PMA) is a feasible way to manipulate perpendicular magnetization,which is of great importance for realizing energy-efficient spintronics.Here,we propose a novel approach to accomplish this task at room temperature by resistive switching(RS) via electrochemical metallization(ECM) in a device with the stack of Si/SiO_(2)/Ta/Pt/Ag/Mn-doped ZnO(MZO)/Pt/Co/Pt/ITO.By applying certain voltages,the device could be set at high-resistance-state(HRS) and low-resistance-state(LRS),accompanied with a larger and a smaller coercivity(H_(C)),respectively,which demonstrates a nonvolatile E-field control of PMA.Based on our previous studies and the present control experiments,the electric modulation of PMA can be briefly explained as follows.At LRS,the Ag conductive filaments form and pass through the entire MZO layer and finally reach the Pt/Co/Pt sandwich,leading to weakening of PMA and reduction of H_(C).In contrast,at HRS,most of the Ag filaments dissolve and leave away from the Pt/Co/Pt sandwich,causing partial recovery of PMA and an increase of H_(C).This work provides a new clue to designing low-power spintronic devices based on PMA films.
基金supported by the National Natural Science Foundation of China(Grant Nos.52072060 and 52021001)the National Key R&D Program of China(Grant No.2021YFB2801600)the China Postdoctoral Science Foundation(Grant No.2021M700679)。
文摘Yttrium iron garnet(YIG) films possessing both perpendicular magnetic anisotropy(PMA) and low damping would serve as ideal candidates for high-speed energy-efficient spintronic and magnonic devices.However,it is still challenging to achieve PMA in YIG films thicker than 20 nm,which is a major bottleneck for their development.In this work,we demonstrate that this problem can be solved by using substrates with moderate lattice mismatch with YIG so as to suppress the excessive strain-induced stress release as increasing the YIG thickness.After carefully optimizing the growth and annealing conditions,we have achieved out-of-plane spontaneous magnetization in YIG films grown on sGGG substrates,even when they are as thick as 50 nm.Furthermore,ferromagnetic resonance and spin pumping induced inverse spin Hall effect measurements further verify the good spin transparency at the surface of our YIG films.
基金Project supported by the National Key R&D Program of China(Grant Nos.2017YFA0206200 and 2016YFA0302300)the Basic Science Center Project of the National Natural Science Foundation of China(Grant No.51788104)+2 种基金the National Natural Science Foundation of China(Grant Nos.11774194,11804182,51831005,and 11811082)Beijing Natural Science Foundation(Grant No.Z190009)the Beijing Advanced Innovation Center for Future Chip(ICFC).
文摘Compensated ferrimagnetic insulators are particularly interesting for enabling functional spintronic,optical,and microwave devices.Among many different garnets,Gd_(3)Fe_(5)O_(12)(GdIG)is a representative compensated ferrimagnetic insulator.In this paper,we will study the evolution of the surface morphology,the magnetic properties,and the magnetization compensation through changing the following parameters:the annealing temperature,the growth temperature,the annealing duration,and the choice of different single crystalline garnet substrates.Our objective is to find the optimized growth condition of the GdIG films,for the purpose of achieving a strong perpendicular magnetic anisotropy(PMA)and a flat surface,together with a small effective damping parameter.Through our experiments,we have found that the surface roughness approaching 0.15 nm can be obtained by choosing the growth temperature around 700℃,together with an enhanced PMA.We have also found the modulation of magnetic anisotropy by choosing different single crystalline garnet substrates which change the tensile strain to the compressive strain.A measure of the effective magnetic damping parameter(α_(eff)=0.04±0.01)through a spin pumping experiment in a GdIG/Pt bilayer is also made.Through optimizing the growth dynamics of GdIG films,our results could be useful for synthesizing garnet films with a PMA,which could be beneficial for the future development of ferrimagnetic spintronics.
基金Supported by the National Basic Research Program of China under Grant No 2011CB921804the Beijing Key Subject Foundation of Condensed Matter Physics under Grant No 0114023
文摘The dependence of perpendicular magnetic anisotropy (PMA) on the barrier layer MgO thickness in MgO/CoFeB /Ta multilayers is investigated. The results show that the strongest PMA occurs in a small window of about 2 4nm with the increase of MgO thickness from 1-1Onto. The crystalline degree of MgO and the change of interatomic distance along the out-of-plane direction may be the main reasons for the change of PMA in these multilayers. Moreover, the roughnesses of 2- and 4-nm-thick MgO samples are 3.163 and 1.8 nm, respectively, and both the samples show PMA. These results could be used to tune the magnetic characteristic of the ultra thin CoFeB film for future applications in perpendicular magnetic devices.
基金Project supported by the National Natural Science Foundation of China(Grant No.61332003)the Natural Science Foundation of Hunan Province,China(Grant No.2015JJ3024)
文摘We investigate the dependence of the switching process on the perpendicular magnetic anisotropy (PMA) constant in perpendicular spin transfer torque magnetic tunnel junctions (P-MTJs) using micromagnetic simulations. It is found that the final stable states of the magnetization distribution of the free layer after switching can be divided into three different states based on different PMA constants: vortex, uniform, and steady. Different magnetic states can be attributed to a trade-off among demagnetization, exchange, and PMA energies. The generation of the vortex state is also related to the non-uniform stray field from the polarizer, and the final stable magnetization is sensitive to the PMA constant. The vortex and uniform states have different switching processes, and the switching time of the vortex state is longer than that of the uniform state due to hindrance by the vortex.
基金supported by the National Basic Research Program of China (2014CB921104)the National Natural Science Foundation of China (Grant Nos. 51222103, 11274113, 11474067, and 51171047)the support from the Program for New Century Excellent Talents in University (NCET-12-0132)
文摘The exchange-coupled [Co/Ni]N/Tb Fe nano-magnetic films can display strong perpendicular magnetic anisotropy(PMA) which depends on the Tb:Fe component ratio, Tb Fe layer thickness and the repetition number N of [Co/Ni]Nmultilayer. Perpendicular spin valves in the nano thickness scale, consisting of a [Co/Ni]3free and a [Co/Ni]5/Tb Fe reference multilayer, show high giant magnetoresistance(GMR) signal of 6.5 % and a large switching field difference over3 k Oe. However, unexpected slanting of the free layer magnetization, accompanied by a reduced GMR ratio, was found to be caused by the presence of a thick Fe-rich or even a thin but Tb-rich Tb Fe layer. We attribute this phenomenon to the large magnetostriction effect of Tb Fe which probably induces strong stress acting on the free layer and hence reduces its interfacial PMA.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 50831002, 51271020, 50971025, 51071022, and 11174031)the National Basic Research Program of China (Grant No. 2012CB932702)+2 种基金PCSIRT, Beijing Nova Program, China (Grant No. 2011031)the Beijing Municipal Natural Science Foundation, China (Grant No. 2102032)the Fundamental Research Funds for the Central Universities, China
文摘Co2FeA10.5Si0.5 (CFAS)-based multilayers sandwiched by MgO layers have been deposited and annealed at different temperatures. Perpendicular magnetic anisotropy (PMA) with the magnetic anisotropy energy density Ku ≈2.5x106 erg/cm3 (1 erg = 10-7 J) and the coercivity He = 363 Oe (10e = 79.9775 A.m-1) has been achieved in the Si/SiO2/MgO (1.5 nm)/CFAS (2.5 nm)/MgO (0.8 nm)/Pt (5 nm) film annealed at 300 ℃. The strong PMA is mainly due to the top MgO layer. The structure can be used as top magnetic electrodes in half-metallic perpendicular magnetic tunnel junctions.
文摘Pd/Co_(2)MnSi(CMS)/NiFe_(2)O_(4)(NFO)/Pd multilayers were fabricated on F-mica substrate by magnetron sputtering.The best PMA performance of the multilayer structure Pd(3 nm)/CMS(5 nm)/NFO(0.8 nm)/Pd(3 nm)was obtained by adjusting the thickness of the CMS and NFO layers.F-mica substrate has a flatter surface than glass and Si/SiO_(2) substrate.The magnetic anisotropy energy density(K_(eff))of the sample deposited on F-mica substrates is 0.6711 Merg/cm^(3)(1 erg=10^(-7) J),which is about 30%higher than that of the multilayer films deposited on glass(0.475 Merg/cm^(3))and Si/SiO_(2)(0.511 Merg/cm^(3))substrates,and the R_(Hall) and H_(C) are also significantly increased.In this study,the NFO layer prepared by sputtering in the high purity Ar environment was exposed to the high purity O_(2) atmosphere for 5 min,which can effectively eliminate the oxygen loss and oxygen vacancy in NFO,ensuring enough Co-O orbital hybridization at the interface of CMS/NFO,and thus effectively improve the sample PMA.
基金This work was financially supported by the National Natural Science Foundation of China (No. 50301002) and the New Star Plan of Science and Technology of Beijing (No.H020821290120)
文摘The CoCr/Pt bilayers and (CoCr/Pt)_(20) multilayers with Pt underlayer wereprepared by DC magnetron sputtering. The effects of prepared condition on perpendicular magneticanisotropy were investigated. The results show that the thickness of Pt under-layer has a greateffect on the microstructure and perpendicular magnetic anisotropy of CoCr/Pt bilayers and(CoCr/Pt)_(20) multilayers. When the thickness of Pt underlayer increases, Pt(lll) and CoCr(002)peaks of both CoCr/Pt bilayers and (CoCr/Pt)_(20) multilayers increase and the bilayer periodicityof the multilayers is improved. The effective magnetic anisotropy of (CoCr/Pt)_(20) multilayers withPt underlayer was much larger than that of CoCr/Pt bilayers. The (CoCr/Pt)_(20) multilayers has astronger perpendicular magnetic anisotropy than that of CoCr/Pt bilayers. This is ascribed to theinterface magnetic anisotropy of the multilayers.
基金Project supported by the National Fundamental Research Program of China(Grant No.2011CB921804)Beijing Key Subject Foundation of Condensed Matter Physics,China(Grant No.0114023)
文摘A detailed study of the magnetic characterizations of the top structure MgO/CoFeB/Mo is presented.The samples show strong perpendicular magnetic anisotropy(PMA) when the thickness of CoFeB is 0.9 nm and 1.1 nm.The saturation magnetic moment and interface anisotropy constant are 1566 emu/cm3 and 3.75 erg/cm2,respectively.The magnetic dead layer(MDL) is about 0.23 nm in this system.Furthermore,strong capping layer thickness dependence is also observed.The strong PMA of 1.1 nm CoFeB only exists in a Mo cap layer thickness window of 1.2-2 nm.To maintain PMA,the metal layer could not be too thin or thick in these multilayers.The oxidation and diffusion of the metal capping layer should be respectively responsibility for the degradation of PMA in these thin or thick metal capping layer samples.
基金This work was financially supported by the National Natural Science Foundation of China (No.50471093)the Science Founda-tion of Beijing (No.2052014)
文摘(Pt/Co)n/FeMn multilayers with perpendicular anisotropy (PA) were prepared by magnetron sputtering with Pt as the buffer layer and the capping layer. The dependence of perpendicular exchange bias (PEB), Hex, on the thickness of the FeMn anfiferromagnet (AFM) layer is similar to that of in-plane exchange bias. The value of Hex for the (Pt/Co)3/FeMn multilayer reaches 22.3 kA/m. A thin Pt spacer was inserted between the Co/FeMn interface to enhance PEB. The PEB reaches the largest at 39.8 kA/m when the thickness of the Pt spacer is 0.4 nm.
基金supported by the State Key Project of Fundamental Research of Ministry of Science and Technology,China(Grant No.2010CB934400)the National Natural Science Foundation of China(Grant Nos.51229101 and 11374351)
文摘Recent progresses in magnetic tunnel junctions with perpendicular magnetic anisotropy (PMA) are reviewed and summarized. At first, the concept and source of perpendicular magnetic anisotropy (PMA) are introduced. Next, a historical overview of PMA materials as magnetic electrodes, such as the RE-TM alloys TbFeCo and GdFeCo, novel tetragonal manganese alloys Mn-Ga, L10-ordered (Co, Fe)/Pt alloy, multilayer film [Co, Fe, CoFe/Pt, Pd, Ni, AU]N, and ultra-thin magnetic metal/oxidized barrier is offered. The other part of the article focuses on the optimization and fabrication of CoFeB/MgO/CoFeB p-MTJs, which is thought to have high potential to meet the main demands for non-volatile magnetic random access memory.