Petroleum contamination is considered as a major risk to the health of humans and environment.Biochars as low-cost and eco-friendly carbon materials,have been widely used for the removal of petroleum hydrocarbon in th...Petroleum contamination is considered as a major risk to the health of humans and environment.Biochars as low-cost and eco-friendly carbon materials,have been widely used for the removal of petroleum hydrocarbon in the environment.The purpose of this paper is to review the performance,mechanisms,and potential environmental toxicity of biochar,modified biochar and its integration use with other materials in petroleum contaminated soil and water.Specifically,the use of biochar in oil-contaminated water and soil as well as the factors that could influence the removal ability of biochar were systematically evaluated.In addition,the modification and integrated use of biochar for improving the removal efficiency were summarized from the aspects of sorption,biodegradation,chemical degradation,and reusability.Moreover,the functional impacts and associated ecotoxicity of pristine and modified biochars in various environments were demonstrated.Finally,some shortcoming of current approaches,and future research needs were provided for the future direction and challenges of modified biochar research.Overall,this paper gain insight into biochar application in petroleum remediation from the perspectives of performance enhancement and environmental sustainability.展开更多
As the New Year kicks off,it's also time to celebrate the 50^(th) Anniversary of Petroleum Exploration and Development.In the past 50 years,Petroleum Exploration and Development has been endeavoring to disseminati...As the New Year kicks off,it's also time to celebrate the 50^(th) Anniversary of Petroleum Exploration and Development.In the past 50 years,Petroleum Exploration and Development has been endeavoring to disseminating technology,witnessing and recording the glorious history of China's oil industry developing from weak to strong.In the new era,we have been focusing on theoretical innovation and technology advancement in oil and gas exploration and development,taking an edge on the latest development of the industry,continuously improving the quality of our journal,and leading the journal in a way of high quality and with special features.展开更多
The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different pol...The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.展开更多
The classical source-to-trap petroleum system concept only considers the migration and accumulation of conventional oil and gas in traps driven dominantly by buoyance in a basin,although revised and improved,even some...The classical source-to-trap petroleum system concept only considers the migration and accumulation of conventional oil and gas in traps driven dominantly by buoyance in a basin,although revised and improved,even some new concepts as composite petroleum system,total petroleum system,total composite petroleum system,were proposed,but they do not account for the vast unconventional oil and gas reservoirs within the system,which is not formed and distributed in traps dominantly by buoyancedriven.Therefore,the petroleum system concept is no longer adequate in dealing with all the oil and gas accumulations in a basin where significant amount of the unconventional oil and gas resources are present in addition to the conventional oil and gas accumulations.This paper looked into and analyzed the distribution characteristics of conventional and unconventional oil/gas reservoirs and their differences and correlations in petroliferous basins in China and North America,and then proposed whole petroleum system(WPS)concept,the WPS is defined as a natural system that encompasses all the conventional and unconventional oil and gas,reservoirs and resources originated from organic matter in source rocks,the geological elements and processes involving the formation,evolution,and distribution of these oil and gas,reservoirs and resources.It is found in the WPS that there are three kinds of hydrocarbons dynamic fields,three kinds of original hydrocarbons,three kinds of reservoir rocks,and the coupling of these three essential elements lead to the basic ordered distribution model of shale oil/gas reservoirs contacting or interbeded with tight oil/gas reservoirs and separated conventional oil/gas reservoirs from source rocks upward,which is expressed as“S\T-C”.Abnormal conditions lead to other three special ordered distribution models:The first is that with shale oil/gas reservoirs separated from tight oil/gas reservoirs.The second is that with two direction ordered distributions from source upward and downward.The third is with lateral distribution from source outside.展开更多
Based on the analysis of Upper Paleozoic source rocks, source-reservoir-caprock assemblage, and gas accumulation characteristics in the Ordos Basin, the gas accumulation geological model of total petroleum system is d...Based on the analysis of Upper Paleozoic source rocks, source-reservoir-caprock assemblage, and gas accumulation characteristics in the Ordos Basin, the gas accumulation geological model of total petroleum system is determined. Then, taking the Carboniferous Benxi Formation and the Permian Taiyuan Formation and Shanxi Formation as examples, the main controlling factors of gas accumulation and enrichment are discussed, and the gas enrichment models of total petroleum system are established. The results show that the source rocks, faults and tight reservoirs and their mutual coupling relations control the distribution and enrichment of gas. Specifically, the distribution and hydrocarbon generation capacity of source rocks control the enrichment degree and distribution range of retained shale gas and tight gas in the source. The coupling between the hydrocarbon generation capacity of source rocks and the physical properties of tight reservoirs controls the distribution and sweet spot development of near-source tight gas in the basin center. The far-source tight gas in the basin margin is mainly controlled by the distribution of faults, and the distribution of inner-source, near-source and far-source gas is adjusted and reformed by faults. Generally, the Upper Paleozoic gas in the Ordos Basin is recognized in four enrichment models: inner-source coalbed gas and shale gas, inner-source tight sandstone gas, near-source tight gas, and far-source fault-transported gas. In the Ordos Basin, inner-source tight gas and near-source tight gas are the current focuses of exploration, and inner-source coalbed gas and shale gas and far-source gas will be important potential targets in the future.展开更多
The China seas and adjacent areas contain numerous petroleum basins.One of the main challenges for future oil and gas exploration is to identify the inherent patterns of petroleum basin distribution.The formation and ...The China seas and adjacent areas contain numerous petroleum basins.One of the main challenges for future oil and gas exploration is to identify the inherent patterns of petroleum basin distribution.The formation and evolution of petroleum basins along with the migration and accumulation of oil and gas are often closely related to the tectonic environment.The gravity and magnetic fields with high lateral resolution and wide coverage provide important data for regional tectonic research.Based on the gravity data in the Global Satellite Gravity Anomaly Database(V31.1)and magnetic data from the Earth Magnetic Anomaly Grid(2-arc-minute resolution)(V2),this study uses integrated gravity and magnetic field technique to obtain integrated gravity and magnetic field result for the China seas and adjacent areas,and then adopts the normalized vertical derivative of the total horizontal derivative technique to conduct partition.Finally,it identifies the relationship between the partition characteristics and tectonics as well as the patterns of petroleum basin occurrence.The research shows that the partition of gravity and magnetic field integrated result has a good correlation with the Neo-Cathaysian tectonic system and tectonic units.The petroleum basins are characterized according to three blocks arranged from north to south and four zones arranged from east to west.The north-south block structure causes the uneven distribution of oil and gas resources in the mainland area and the differences in the hydrocarbon-bearing strata.Petroleum basins are more abundant in the north than in the south.The ages of the main oil-and gas-bearing strata are“Paleozoic–Mesozoic,Paleozoic–Mesozoic–Cenozoic,and Paleozoic–Mesozoic”,in order from north to south.The difference in the overall type of oil and gas resources in all basins is controlled by the east–west zonation.From east to west,the oil and gas resource type exhibits a wave-like pattern of“oil and gas,gas,oil and gas,gas”.The vertical distribution is characterized by an upper oil(Mesozoic–Cenozoic)and lower gas(Mesozoic–Paleozoic)structure.Within the study area,the Paleozoic marine strata should be the main strata of future natural gas exploration.展开更多
The development of globally distributed Phanerozoic petroleum source rocks is concentrated on time intervals, which correlate convincingly with climatic driven glaciation epochs of Earth’s history, repeated every 150...The development of globally distributed Phanerozoic petroleum source rocks is concentrated on time intervals, which correlate convincingly with climatic driven glaciation epochs of Earth’s history, repeated every 150 million years, and during sea level high stands and maxima of global magmatism with a period of 300 million years. The 150 million year periodicity appears to be related to the path of the solar system through the spiral arms of the Milky Way and the 300 million year periodicity to changes of the spiral system. The spiral arms are preferred birth places of new stars, of which the larger ones have only smaller lifespans. Their preliminary deaths ended with explosions and selectively with the development of so-called white dwarfs, neutron stars or black holes. The times of the explosions of intermediate (sun-like) stars can be determined by measuring the present brightness of the dwarfs. Not surprisingly the last two maxima of recordable near solar system star explosions took place during the presumably spiral arms driven glacial epochs in Eocene to present and Upper Jurassic times. Such near solar system star explosions may have been the source of intense neutrino showers, cosmic rays and star dust. This dust contained all kinds of chemical elements, including phosphorus and uranium. Such cosmic phosphorus may have supported, through fertilizing, the distribution of life on Earth additionally to local phosphorus resources via bloom of biota in lakes and oceans and the enhanced growth of plants on land across all climatic zones. Subsequently it maintained the development of petroleum source rocks of all organic matter types within black shales and coals. Via the distribution of remnants of exploding stars—mainly white dwarfs, but neutron stars and black holes have to be counted as well—a cosmic contribution can therefore casually linked to the deposition of petroleum source rocks on Earth, not only purely correlatively by their contemporaneous appearances.展开更多
The zinc oxide nano-particles have been used in this research. In this work, zinc oxide nanoparticles have been added to light and heavy crude oil. In this research, thermoelectric and physical properties of light and...The zinc oxide nano-particles have been used in this research. In this work, zinc oxide nanoparticles have been added to light and heavy crude oil. In this research, thermoelectric and physical properties of light and heavy crude petroleum have been measured, experimentally. In addition, dimensionless groups in hydrodynamics and heat transfer calculations are presented. This research illustrates that heat capacity of light and heavy crude petroleum varies from 4256 J/kg·°C to 4457 J/kg·°C and 4476 J/kg·°C to 5002 J/kg·°C, respectively. Moreover, heat capacity of light and heavy nano-crude petroleum is changing from about 4285 J/kg·°C to 4496 J/kg·°C and 4494 J/kg·°C to 5021 J/kg·°C, respectively.展开更多
On the 49th anniversary of the founding of Petroleum Exploration and Development,the 9th Editorial Committee is officially established,with Academician Zhao Wenzhi of the Chinese Academy of Engineering serving as the ...On the 49th anniversary of the founding of Petroleum Exploration and Development,the 9th Editorial Committee is officially established,with Academician Zhao Wenzhi of the Chinese Academy of Engineering serving as the Director and Professor Dou Lirong,President of PetroChina Research Institute of Petroleum Exploration and Development,serving as the Executive Deputy Director.展开更多
On June 28^(th),2023,Clarivate Analytics released the Journal Citation Reports of 2022.The impact factor of Petroleum Exploration and Development has reached 7.5,a 44%increase against 5.194 as of 2021,seting a new his...On June 28^(th),2023,Clarivate Analytics released the Journal Citation Reports of 2022.The impact factor of Petroleum Exploration and Development has reached 7.5,a 44%increase against 5.194 as of 2021,seting a new historical record in world petroleum engineering journals.展开更多
The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant ch...The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant challenge.This study proposes alkali calcining and reflux washing to examine the impacts of temperature, particle size, the mass ratio of Na_(2)CO_(3) to NaOH, and total sodium addition on the desulfurization efficiency and mechanism. The results show that the desulfurization rate increases with increasing temperature, increasing total sodium content, and decreasing particle size. The addition of alkali can significantly reduce the opening-ring reaction temperature of thiophene and convert organic sulfur into inorganic sulfur(Na_(2)S). Three washing methods were compared, and reflux washing was selected to separate inorganic sulfur(Na_(2)S) from calcined petroleum coke. The sulfur content in petroleum coke decreased from 7.29% to 1.90%, with a desulfurization rate of 80.13% under optimal conditions. The petroleum coke was analyzed before and after desulfurization using X-Ray diffraction(XRD), Scanning Electron Microscopy(SEM), Infrared Spectroscopy(IR), Thermogravimetric Analysis and Differential Scanning Calorimetry(TG-DSC), Gaschromatography-mass Spectrometry(GC-MS). The results show that thiophene and benzothiophene in petroleum coke are decomposed and converted into octane and ethyl cyclohexane. These new observations are expected to provide further understanding and guidance for the utilization of highsulfur petroleum coke.展开更多
The remediation of crude oil-impacted soil has always been a challenge in different soil environments and climatic conditions. Bioremediation technology has offered a breakthrough in restoring crude oil-impacted soil/...The remediation of crude oil-impacted soil has always been a challenge in different soil environments and climatic conditions. Bioremediation technology has offered a breakthrough in restoring crude oil-impacted soil/sediment in muddy, dry soil and wetlands. Though, there have been varied environmental conditions that have hampered the success of the bioremediation process. This study has evaluated the effectiveness of a biostimulated bioremediation of crude oil-impacted soil using some design criteria—nutrient amendment (NPK fertilizer) and moisture content. Soil sample sets—A, B, C, D, E, F, and G were impacted with crude oil at a ratio of 10 g/kg and amended with varying amounts of nutrient 30, 60, and 80 g of N.P.K fertilizer. The medium for the inoculation of the nutrient was water and the volume of water applied varied from 30% to 80% saturation. The soil sample sets were harvested at an interval of 3 months for 180 days to determine the concentration of total petroleum hydrocarbon left in the soil. The analysis of the total petroleum hydrocarbon was achieved using a GC-FID with a capillary column and autosampler. Soil samples were extracted with mixed solvent dichloromethane and acetone at a 1:1 ratio. The total petroleum hydrocarbon results show that biostimulated bioremediation achieved better results in soil sample sets with low moisture content (30% water saturation) and moderate nutrient amendment. The biodegradation of the sample sets with high water saturation and a high nutrient amendment was slow with a higher amount of total hydrocarbon content at the end of the 180 days. The variability in the hydrocarbon degradation pattern of contaminated soil shows that biostimulated bioremediation achieved better results in soils with low moisture content than in soil environments with high water content (saturation). More so, nutrient overdosing of the substrate hampered the effectiveness of the remediation process.展开更多
The process of transporting crude oil across pipelines is one of the most critical aspects of the midstream petroleum industry.In the present experimental work,the effect of temperature,pressure drop,and pipe diameter...The process of transporting crude oil across pipelines is one of the most critical aspects of the midstream petroleum industry.In the present experimental work,the effect of temperature,pressure drop,and pipe diameter on the flow rate of heavy crude oil have been assessed.Moreover,the total discharge and energy losses have been evaluated in order to demonstrate the improvements potentially achievable by using solar heating method replacing pipe,and adjusting the value of the initial pressure difference.Crude oil of API=20 has been used for the experiments,with the studied pipelines sections connecting the separator unit to the storage tank operating at a temperature of 25℃-100℃,pressure drop of 3,4,5,and 6 kg/cm^(2),and with pipe diameter of 4,6,and 8 in.The results show that on increasing the temperature and/or the pressure drop,the flow rate through the pipeline becomes higher,thus raising the total pumping energy(as the pipe diameter increase),while energy losses increase from the last separator to the storage tank in the field.A pipe diameter increase can also produce a growth of the total pumping energy(i.e.,energy losses increase).The results of the present analysis suggest that employing an optimal temperature(50℃)is needed to ensure good performance.展开更多
A cross-sectional exploratory assessment of the needs and challenges of petroleum industry in Nigeria, in assessing process safety cumulative risk for major accidents prevention was investigated. A purposive cum rando...A cross-sectional exploratory assessment of the needs and challenges of petroleum industry in Nigeria, in assessing process safety cumulative risk for major accidents prevention was investigated. A purposive cum random sampling technique was used in this study, among selected petroleum companies operating in Nigeria. Survey questionnaires were received from 216 participants made up of asset integrity engineers/operators, process safety experts, production safety professionals in the petroleum industry in Nigeria. Data analyses were carried out to cover descriptive and inferential statistics. Overall, the study recognized that assessing process safety cumulative risk is not a simple process due largely to the changing nature of safety critical barriers degradation data. The study result showed four main challenges faced by petroleum industries in Nigeria, in assessing process safety cumulative risk: 1) the study showed that 94% of the respondents agreed that there is limited accessibility to safety critical barriers degradation data (little automation). Also 2) 94% of the respondents accounted for poor knowledge of process safety cumulative risk is and agreed it to be of low rating. The result further showed that 3) 90% of the respondents demonstrated that there are no guidance and procedures in assessing process safety cumulative risk and finally 4) 92% of the respondents reported that there is no real-time risk visualization model/ tool. Addressing these issues and challenges by the petroleum industries in the study area, will lead to successful assessment of process safety cumulative risk, thereby reducing the risk of major accidents.展开更多
The petroleum industry has a complex,inflexible and challenging supply chain(SC)that impacts both the national economy as well as people’s daily lives with a range of services,including transportation,heating,electri...The petroleum industry has a complex,inflexible and challenging supply chain(SC)that impacts both the national economy as well as people’s daily lives with a range of services,including transportation,heating,electricity,lubricants,as well as chemicals and petrochemicals.In the petroleum industry,supply chain management presents several challenges,especially in the logistics sector,that are not found in other industries.In addition,logistical challenges contribute significantly to the cost of oil.Uncertainty regarding customer demand and supply significantly affects SC networks.Hence,SC flexibility can be maintained by addressing uncertainty.On the other hand,in the real world,decision-making challenges are often ambiguous or vague.In some cases,measurements are incorrect owing to measurement errors,instrument faults,etc.,which lead to a pentagonal fuzzy number(PFN)which is the extension of a fuzzy number.Therefore,it is necessary to develop quantitative models to optimize logistics operations and supply chain networks.This study proposed a linear programming model under an uncertain environment.The model minimizes the cost along the refineries,depots,multimode transport and demand nodes.Further developed pentagonal fuzzy optimization,an alternative approach is developed to solve the downstream supply chain using themixed-integer linear programming(MILP)model to obtain a feasible solution to the fuzzy transportation cost problem.In this model,the coefficient of the transportation costs and parameters is assumed to be a pentagonal fuzzy number.Furthermore,defuzzification is performed using an accuracy function.To validate the model and technique and feasibility solution,an illustrative example of the oil and gas SC is considered,providing improved results compared with existing techniques and demonstrating its ability to benefit petroleum companies is the objective of this study.展开更多
Recently, significant oil discoveries have been made in the shallower pay zones of the Jurassic Badaowan Formation (J_(1)b) in the Mahu Sag, Junggar Basin, Northwest China. However, little work has been done on the ge...Recently, significant oil discoveries have been made in the shallower pay zones of the Jurassic Badaowan Formation (J_(1)b) in the Mahu Sag, Junggar Basin, Northwest China. However, little work has been done on the geochemical characteristics and origins of the oil in the J_(1)b reservoir. This study analyzes 44 oil and 14 source rock samples from the area in order to reveal their organic geochemical characteristics and the origins of the oils. The J_(1)b oils are characterized by a low Pr/Ph ratio and high β-carotene and gammacerane indices, which indicate that they were mainly generated from source rocks deposited in a hypersaline environment. The oils are also extremely enhanced in C_(29) regular steranes, possibly derived from halophilic algae. Oil-source correlation shows that the oils were derived from the Lower Permian Fengcheng Formation (P_(1)f) source rocks, which were deposited in a strongly stratified and highly saline water column with a predominance of algal/bacterial input in the organic matter. The source rocks of the Middle Permian lower-Wuerhe Formation (P_(2)w), which were deposited in fresh to slightly saline water conditions with a greater input of terrigenous organic matter, make only a minor contribution to the J_(1)b oils. The reconstruction of the oil accumulation process shows that the J_(1)b oil reservoir may have been twice charged during Late Jurassic–Early Cretaceous and the Paleogene–Neogene, respectively. A large amount volume of hydrocarbons generated in the P_(1)f source rock and leaked from T_(1)b oil reservoirs migrated along faults connecting source beds and shallow-buried secondary faults into Jurassic traps, resulting in large-scale accumulations in J_(1)b. These results are crucial for understanding the petroleum system of the Mahu Sag and will provide valuable guidance for petroleum exploration in the shallower formations in the slope area of the sag.展开更多
Based on drilling geological,geochemical,geophysical and production test data,the characteristics of source rocks,reservoir rocks and caprocks,as well as the process of hydrocarbon generation,trap evolution and oil ac...Based on drilling geological,geochemical,geophysical and production test data,the characteristics of source rocks,reservoir rocks and caprocks,as well as the process of hydrocarbon generation,trap evolution and oil accumulation of the oil-bearing assemblage composed of the Cretaceous Yingcheng Formation(K1yc)and Denglouku Formation(K1d)in the Shuangcheng area,northern Songliao Basin,NE China,were analyzed by using the research methods for petroleum systems.The source rocks mainly exist in K1yc,with the organic matters mainly originated from lower aquatic organisms and algae,and reaching the grade of high-quality source rock in terms of organic abundance.The crude oil,which is characterized by low density,high freezing point and high wax content,is believed to have generated by the K1yc source rocks.The reservoir rocks include K1d sandstones and K1yc glutenites.The mudstone in the fourth member of K1d serves as the direct caprock of the oil reservoir.The oil was generated during the period between Yaojia Formation and Nenjiang Formation,and then accumulated during the periods of Nenjiang Formation and Paleogene–Neogene.The traps evolved in three stages:the late Yingcheng Formation,the late Quantou Formation and the late Nenjiang Formation,forming structural and structural-lithologic reservoirs.It is concluded that good source-reservoir-caprock assemblage,late hydrocarbon charging,short migration distance and stable tectonic setting are favorable factors for the formation of oil reservoirs.展开更多
The petroleum paleo-productivity and generative potential of the Nkporo and Awgu shales in the Lower Benue Trough (LBT) were studied. Major oxides were determined using Spectro Ciros Inductively-coupled plasma optical...The petroleum paleo-productivity and generative potential of the Nkporo and Awgu shales in the Lower Benue Trough (LBT) were studied. Major oxides were determined using Spectro Ciros Inductively-coupled plasma optical emission spectrometer (ICP-OES) while trace and rare earth elements were determined using an ELAN 9000 Inductively-coupled plasma mass spectrometer (ICP-MS). The shales have Co/Ni ratios greater than 0.1 suggesting oil source rocks with more marine source input due to brief marine incursion in the transition zone after deposition. The very low Ni values and moderate V values, and a lack of correlation between the TOC and sulphur content, suggests that the organic matter is of terrestrial Type Ⅲ;and the very low paleo-productivity (Ba/Al and P/Ti ratios) suggests that the organic matter is of terrestrial origin. The low V/Ni values of the Nkporo and Awgu shales (Av. ≈ 4) and the high metal concentrations indicate a matured status. From the K/Rb ratios of the Nkporo (191–259) and Awgu shales (198–261), it can be deduced that the organic matter within the shales experienced a considerable loss of K and the shales are mature to generate gaseous hydrocarbons.展开更多
This study considers the effect of Eichhornia Crassipes Biodiesel(ECB)blends on the performances,combustion,and emission characteristics of a direct injection compression ignition engine operated in a dual-fuel mode(D...This study considers the effect of Eichhornia Crassipes Biodiesel(ECB)blends on the performances,combustion,and emission characteristics of a direct injection compression ignition engine operated in a dual-fuel mode(DFM)and equipped with an Exhaust gas recirculation technique(EGR).In particular,a single-cylinder,four-stroke,water-cooled diesel engine was utilized and four modes of fuel operation were considered:mode I,the engine operated with an ordinary diesel fuel;mode II,the engine operated with the addition of 2.4 L/min of lique-fied petroleum gas(LPG)and 20%EGR;mode III,20%ECB with 2.4 L/min LPG and 20%EGR;mode IV,40%ECB with 2.4 L/min LPG and 20%EGR.The operation conditions were constant engine speed(1500 rpm),var-iation of load(25%,50%,75%,and 100%),full load,with a compression ratio of 18,and a time injection of 23°BTDC(Before top died center).With regard to engine emissions,carbon dioxide(CO_(2)),carbon monoxide(CO),hydrocarbons(UHC),and nitrogen oxide(NOX)were measured using a gas analyzer.The smoke opacity was measured using an OPABOX smoke meter.By comparing the results related to the different modes with mode I at full load,the BTE(Brake thermal efficiency)increased by 20.17%,11.45%,and 12.66%with modes II,III,and IV,respectively.In comparison to the results for mode II,the BTE decreased due to the combustion of ECB blends by 7.26%and 6.24%for mode III and mode IV,respectively,at full load.In comparison to mode II,the Brake specific energy consumption(BSEC)increased with the ECB substitution.With ECB blends,there is a noticeable decrease in the CO,CO_(2),and UHC emissions at a partial load.Furthermore,the 20%ECB has no effect on CO emissions at full load.For modes II and IV,the CO_(2)increased by 33.33%and 19%,respectively,while the UHC emissions were reduced by 14.49%for mode III and 26.08%for mode IV.The smoke of mode III was lower by 7.21%,but for mode IV,it was higher by 12.37%.In addition,with mode III and mode IV,the NOx emissions increased by 30.50%and 18.80%,respectively.展开更多
基金supported by the Yunnan Fundamental Research Projects(No.202201BE070001-043)the Yunnan Provincial Excellent Young Scientists Fund(No.202201AW070006)+1 种基金USDA-NRCS(No.NR217217XXXXG004)the USDA National Institute of Food and Agriculture Hatch Project(No.7003969)。
文摘Petroleum contamination is considered as a major risk to the health of humans and environment.Biochars as low-cost and eco-friendly carbon materials,have been widely used for the removal of petroleum hydrocarbon in the environment.The purpose of this paper is to review the performance,mechanisms,and potential environmental toxicity of biochar,modified biochar and its integration use with other materials in petroleum contaminated soil and water.Specifically,the use of biochar in oil-contaminated water and soil as well as the factors that could influence the removal ability of biochar were systematically evaluated.In addition,the modification and integrated use of biochar for improving the removal efficiency were summarized from the aspects of sorption,biodegradation,chemical degradation,and reusability.Moreover,the functional impacts and associated ecotoxicity of pristine and modified biochars in various environments were demonstrated.Finally,some shortcoming of current approaches,and future research needs were provided for the future direction and challenges of modified biochar research.Overall,this paper gain insight into biochar application in petroleum remediation from the perspectives of performance enhancement and environmental sustainability.
文摘As the New Year kicks off,it's also time to celebrate the 50^(th) Anniversary of Petroleum Exploration and Development.In the past 50 years,Petroleum Exploration and Development has been endeavoring to disseminating technology,witnessing and recording the glorious history of China's oil industry developing from weak to strong.In the new era,we have been focusing on theoretical innovation and technology advancement in oil and gas exploration and development,taking an edge on the latest development of the industry,continuously improving the quality of our journal,and leading the journal in a way of high quality and with special features.
文摘The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.
基金This work was supported by the major science and technology projects of CNPC during the“14th five-year plan”(Grant number 2021DJ0101)。
文摘The classical source-to-trap petroleum system concept only considers the migration and accumulation of conventional oil and gas in traps driven dominantly by buoyance in a basin,although revised and improved,even some new concepts as composite petroleum system,total petroleum system,total composite petroleum system,were proposed,but they do not account for the vast unconventional oil and gas reservoirs within the system,which is not formed and distributed in traps dominantly by buoyancedriven.Therefore,the petroleum system concept is no longer adequate in dealing with all the oil and gas accumulations in a basin where significant amount of the unconventional oil and gas resources are present in addition to the conventional oil and gas accumulations.This paper looked into and analyzed the distribution characteristics of conventional and unconventional oil/gas reservoirs and their differences and correlations in petroliferous basins in China and North America,and then proposed whole petroleum system(WPS)concept,the WPS is defined as a natural system that encompasses all the conventional and unconventional oil and gas,reservoirs and resources originated from organic matter in source rocks,the geological elements and processes involving the formation,evolution,and distribution of these oil and gas,reservoirs and resources.It is found in the WPS that there are three kinds of hydrocarbons dynamic fields,three kinds of original hydrocarbons,three kinds of reservoir rocks,and the coupling of these three essential elements lead to the basic ordered distribution model of shale oil/gas reservoirs contacting or interbeded with tight oil/gas reservoirs and separated conventional oil/gas reservoirs from source rocks upward,which is expressed as“S\T-C”.Abnormal conditions lead to other three special ordered distribution models:The first is that with shale oil/gas reservoirs separated from tight oil/gas reservoirs.The second is that with two direction ordered distributions from source upward and downward.The third is with lateral distribution from source outside.
基金Supported by the National Natural Science Foundation of China (41872128)the CNPC Major Science and Technology Project (2021DJ0101)。
文摘Based on the analysis of Upper Paleozoic source rocks, source-reservoir-caprock assemblage, and gas accumulation characteristics in the Ordos Basin, the gas accumulation geological model of total petroleum system is determined. Then, taking the Carboniferous Benxi Formation and the Permian Taiyuan Formation and Shanxi Formation as examples, the main controlling factors of gas accumulation and enrichment are discussed, and the gas enrichment models of total petroleum system are established. The results show that the source rocks, faults and tight reservoirs and their mutual coupling relations control the distribution and enrichment of gas. Specifically, the distribution and hydrocarbon generation capacity of source rocks control the enrichment degree and distribution range of retained shale gas and tight gas in the source. The coupling between the hydrocarbon generation capacity of source rocks and the physical properties of tight reservoirs controls the distribution and sweet spot development of near-source tight gas in the basin center. The far-source tight gas in the basin margin is mainly controlled by the distribution of faults, and the distribution of inner-source, near-source and far-source gas is adjusted and reformed by faults. Generally, the Upper Paleozoic gas in the Ordos Basin is recognized in four enrichment models: inner-source coalbed gas and shale gas, inner-source tight sandstone gas, near-source tight gas, and far-source fault-transported gas. In the Ordos Basin, inner-source tight gas and near-source tight gas are the current focuses of exploration, and inner-source coalbed gas and shale gas and far-source gas will be important potential targets in the future.
基金The Scientific and Technological Project of CNOOC Research Institute Co.,Ltd.,under contract No.CCL2021RCPS0167KQN。
文摘The China seas and adjacent areas contain numerous petroleum basins.One of the main challenges for future oil and gas exploration is to identify the inherent patterns of petroleum basin distribution.The formation and evolution of petroleum basins along with the migration and accumulation of oil and gas are often closely related to the tectonic environment.The gravity and magnetic fields with high lateral resolution and wide coverage provide important data for regional tectonic research.Based on the gravity data in the Global Satellite Gravity Anomaly Database(V31.1)and magnetic data from the Earth Magnetic Anomaly Grid(2-arc-minute resolution)(V2),this study uses integrated gravity and magnetic field technique to obtain integrated gravity and magnetic field result for the China seas and adjacent areas,and then adopts the normalized vertical derivative of the total horizontal derivative technique to conduct partition.Finally,it identifies the relationship between the partition characteristics and tectonics as well as the patterns of petroleum basin occurrence.The research shows that the partition of gravity and magnetic field integrated result has a good correlation with the Neo-Cathaysian tectonic system and tectonic units.The petroleum basins are characterized according to three blocks arranged from north to south and four zones arranged from east to west.The north-south block structure causes the uneven distribution of oil and gas resources in the mainland area and the differences in the hydrocarbon-bearing strata.Petroleum basins are more abundant in the north than in the south.The ages of the main oil-and gas-bearing strata are“Paleozoic–Mesozoic,Paleozoic–Mesozoic–Cenozoic,and Paleozoic–Mesozoic”,in order from north to south.The difference in the overall type of oil and gas resources in all basins is controlled by the east–west zonation.From east to west,the oil and gas resource type exhibits a wave-like pattern of“oil and gas,gas,oil and gas,gas”.The vertical distribution is characterized by an upper oil(Mesozoic–Cenozoic)and lower gas(Mesozoic–Paleozoic)structure.Within the study area,the Paleozoic marine strata should be the main strata of future natural gas exploration.
文摘The development of globally distributed Phanerozoic petroleum source rocks is concentrated on time intervals, which correlate convincingly with climatic driven glaciation epochs of Earth’s history, repeated every 150 million years, and during sea level high stands and maxima of global magmatism with a period of 300 million years. The 150 million year periodicity appears to be related to the path of the solar system through the spiral arms of the Milky Way and the 300 million year periodicity to changes of the spiral system. The spiral arms are preferred birth places of new stars, of which the larger ones have only smaller lifespans. Their preliminary deaths ended with explosions and selectively with the development of so-called white dwarfs, neutron stars or black holes. The times of the explosions of intermediate (sun-like) stars can be determined by measuring the present brightness of the dwarfs. Not surprisingly the last two maxima of recordable near solar system star explosions took place during the presumably spiral arms driven glacial epochs in Eocene to present and Upper Jurassic times. Such near solar system star explosions may have been the source of intense neutrino showers, cosmic rays and star dust. This dust contained all kinds of chemical elements, including phosphorus and uranium. Such cosmic phosphorus may have supported, through fertilizing, the distribution of life on Earth additionally to local phosphorus resources via bloom of biota in lakes and oceans and the enhanced growth of plants on land across all climatic zones. Subsequently it maintained the development of petroleum source rocks of all organic matter types within black shales and coals. Via the distribution of remnants of exploding stars—mainly white dwarfs, but neutron stars and black holes have to be counted as well—a cosmic contribution can therefore casually linked to the deposition of petroleum source rocks on Earth, not only purely correlatively by their contemporaneous appearances.
文摘The zinc oxide nano-particles have been used in this research. In this work, zinc oxide nanoparticles have been added to light and heavy crude oil. In this research, thermoelectric and physical properties of light and heavy crude petroleum have been measured, experimentally. In addition, dimensionless groups in hydrodynamics and heat transfer calculations are presented. This research illustrates that heat capacity of light and heavy crude petroleum varies from 4256 J/kg·°C to 4457 J/kg·°C and 4476 J/kg·°C to 5002 J/kg·°C, respectively. Moreover, heat capacity of light and heavy nano-crude petroleum is changing from about 4285 J/kg·°C to 4496 J/kg·°C and 4494 J/kg·°C to 5021 J/kg·°C, respectively.
文摘On the 49th anniversary of the founding of Petroleum Exploration and Development,the 9th Editorial Committee is officially established,with Academician Zhao Wenzhi of the Chinese Academy of Engineering serving as the Director and Professor Dou Lirong,President of PetroChina Research Institute of Petroleum Exploration and Development,serving as the Executive Deputy Director.
文摘On June 28^(th),2023,Clarivate Analytics released the Journal Citation Reports of 2022.The impact factor of Petroleum Exploration and Development has reached 7.5,a 44%increase against 5.194 as of 2021,seting a new historical record in world petroleum engineering journals.
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 51964031 and 52164039)。
文摘The application of high-sulfur petroleum coke after desulfurization in aluminum electrolysis anodes is an important development trend. However, removing sulfur from high-sulfur petroleum coke is still a significant challenge.This study proposes alkali calcining and reflux washing to examine the impacts of temperature, particle size, the mass ratio of Na_(2)CO_(3) to NaOH, and total sodium addition on the desulfurization efficiency and mechanism. The results show that the desulfurization rate increases with increasing temperature, increasing total sodium content, and decreasing particle size. The addition of alkali can significantly reduce the opening-ring reaction temperature of thiophene and convert organic sulfur into inorganic sulfur(Na_(2)S). Three washing methods were compared, and reflux washing was selected to separate inorganic sulfur(Na_(2)S) from calcined petroleum coke. The sulfur content in petroleum coke decreased from 7.29% to 1.90%, with a desulfurization rate of 80.13% under optimal conditions. The petroleum coke was analyzed before and after desulfurization using X-Ray diffraction(XRD), Scanning Electron Microscopy(SEM), Infrared Spectroscopy(IR), Thermogravimetric Analysis and Differential Scanning Calorimetry(TG-DSC), Gaschromatography-mass Spectrometry(GC-MS). The results show that thiophene and benzothiophene in petroleum coke are decomposed and converted into octane and ethyl cyclohexane. These new observations are expected to provide further understanding and guidance for the utilization of highsulfur petroleum coke.
文摘The remediation of crude oil-impacted soil has always been a challenge in different soil environments and climatic conditions. Bioremediation technology has offered a breakthrough in restoring crude oil-impacted soil/sediment in muddy, dry soil and wetlands. Though, there have been varied environmental conditions that have hampered the success of the bioremediation process. This study has evaluated the effectiveness of a biostimulated bioremediation of crude oil-impacted soil using some design criteria—nutrient amendment (NPK fertilizer) and moisture content. Soil sample sets—A, B, C, D, E, F, and G were impacted with crude oil at a ratio of 10 g/kg and amended with varying amounts of nutrient 30, 60, and 80 g of N.P.K fertilizer. The medium for the inoculation of the nutrient was water and the volume of water applied varied from 30% to 80% saturation. The soil sample sets were harvested at an interval of 3 months for 180 days to determine the concentration of total petroleum hydrocarbon left in the soil. The analysis of the total petroleum hydrocarbon was achieved using a GC-FID with a capillary column and autosampler. Soil samples were extracted with mixed solvent dichloromethane and acetone at a 1:1 ratio. The total petroleum hydrocarbon results show that biostimulated bioremediation achieved better results in soil sample sets with low moisture content (30% water saturation) and moderate nutrient amendment. The biodegradation of the sample sets with high water saturation and a high nutrient amendment was slow with a higher amount of total hydrocarbon content at the end of the 180 days. The variability in the hydrocarbon degradation pattern of contaminated soil shows that biostimulated bioremediation achieved better results in soils with low moisture content than in soil environments with high water content (saturation). More so, nutrient overdosing of the substrate hampered the effectiveness of the remediation process.
文摘The process of transporting crude oil across pipelines is one of the most critical aspects of the midstream petroleum industry.In the present experimental work,the effect of temperature,pressure drop,and pipe diameter on the flow rate of heavy crude oil have been assessed.Moreover,the total discharge and energy losses have been evaluated in order to demonstrate the improvements potentially achievable by using solar heating method replacing pipe,and adjusting the value of the initial pressure difference.Crude oil of API=20 has been used for the experiments,with the studied pipelines sections connecting the separator unit to the storage tank operating at a temperature of 25℃-100℃,pressure drop of 3,4,5,and 6 kg/cm^(2),and with pipe diameter of 4,6,and 8 in.The results show that on increasing the temperature and/or the pressure drop,the flow rate through the pipeline becomes higher,thus raising the total pumping energy(as the pipe diameter increase),while energy losses increase from the last separator to the storage tank in the field.A pipe diameter increase can also produce a growth of the total pumping energy(i.e.,energy losses increase).The results of the present analysis suggest that employing an optimal temperature(50℃)is needed to ensure good performance.
文摘A cross-sectional exploratory assessment of the needs and challenges of petroleum industry in Nigeria, in assessing process safety cumulative risk for major accidents prevention was investigated. A purposive cum random sampling technique was used in this study, among selected petroleum companies operating in Nigeria. Survey questionnaires were received from 216 participants made up of asset integrity engineers/operators, process safety experts, production safety professionals in the petroleum industry in Nigeria. Data analyses were carried out to cover descriptive and inferential statistics. Overall, the study recognized that assessing process safety cumulative risk is not a simple process due largely to the changing nature of safety critical barriers degradation data. The study result showed four main challenges faced by petroleum industries in Nigeria, in assessing process safety cumulative risk: 1) the study showed that 94% of the respondents agreed that there is limited accessibility to safety critical barriers degradation data (little automation). Also 2) 94% of the respondents accounted for poor knowledge of process safety cumulative risk is and agreed it to be of low rating. The result further showed that 3) 90% of the respondents demonstrated that there are no guidance and procedures in assessing process safety cumulative risk and finally 4) 92% of the respondents reported that there is no real-time risk visualization model/ tool. Addressing these issues and challenges by the petroleum industries in the study area, will lead to successful assessment of process safety cumulative risk, thereby reducing the risk of major accidents.
文摘The petroleum industry has a complex,inflexible and challenging supply chain(SC)that impacts both the national economy as well as people’s daily lives with a range of services,including transportation,heating,electricity,lubricants,as well as chemicals and petrochemicals.In the petroleum industry,supply chain management presents several challenges,especially in the logistics sector,that are not found in other industries.In addition,logistical challenges contribute significantly to the cost of oil.Uncertainty regarding customer demand and supply significantly affects SC networks.Hence,SC flexibility can be maintained by addressing uncertainty.On the other hand,in the real world,decision-making challenges are often ambiguous or vague.In some cases,measurements are incorrect owing to measurement errors,instrument faults,etc.,which lead to a pentagonal fuzzy number(PFN)which is the extension of a fuzzy number.Therefore,it is necessary to develop quantitative models to optimize logistics operations and supply chain networks.This study proposed a linear programming model under an uncertain environment.The model minimizes the cost along the refineries,depots,multimode transport and demand nodes.Further developed pentagonal fuzzy optimization,an alternative approach is developed to solve the downstream supply chain using themixed-integer linear programming(MILP)model to obtain a feasible solution to the fuzzy transportation cost problem.In this model,the coefficient of the transportation costs and parameters is assumed to be a pentagonal fuzzy number.Furthermore,defuzzification is performed using an accuracy function.To validate the model and technique and feasibility solution,an illustrative example of the oil and gas SC is considered,providing improved results compared with existing techniques and demonstrating its ability to benefit petroleum companies is the objective of this study.
基金supported by the National Natural Science Foundation of China(No.41802179)Sichuan Science and Technology Program(No.2019YFH0037)the Foundation of the State Key Laboratory of Petroleum Resources and Prospecting,China University of Petroleum,Beijing(No.PRP/open-1906).
文摘Recently, significant oil discoveries have been made in the shallower pay zones of the Jurassic Badaowan Formation (J_(1)b) in the Mahu Sag, Junggar Basin, Northwest China. However, little work has been done on the geochemical characteristics and origins of the oil in the J_(1)b reservoir. This study analyzes 44 oil and 14 source rock samples from the area in order to reveal their organic geochemical characteristics and the origins of the oils. The J_(1)b oils are characterized by a low Pr/Ph ratio and high β-carotene and gammacerane indices, which indicate that they were mainly generated from source rocks deposited in a hypersaline environment. The oils are also extremely enhanced in C_(29) regular steranes, possibly derived from halophilic algae. Oil-source correlation shows that the oils were derived from the Lower Permian Fengcheng Formation (P_(1)f) source rocks, which were deposited in a strongly stratified and highly saline water column with a predominance of algal/bacterial input in the organic matter. The source rocks of the Middle Permian lower-Wuerhe Formation (P_(2)w), which were deposited in fresh to slightly saline water conditions with a greater input of terrigenous organic matter, make only a minor contribution to the J_(1)b oils. The reconstruction of the oil accumulation process shows that the J_(1)b oil reservoir may have been twice charged during Late Jurassic–Early Cretaceous and the Paleogene–Neogene, respectively. A large amount volume of hydrocarbons generated in the P_(1)f source rock and leaked from T_(1)b oil reservoirs migrated along faults connecting source beds and shallow-buried secondary faults into Jurassic traps, resulting in large-scale accumulations in J_(1)b. These results are crucial for understanding the petroleum system of the Mahu Sag and will provide valuable guidance for petroleum exploration in the shallower formations in the slope area of the sag.
基金Supported by the National Natural Science Foundation of China(U20A201009,41972157).
文摘Based on drilling geological,geochemical,geophysical and production test data,the characteristics of source rocks,reservoir rocks and caprocks,as well as the process of hydrocarbon generation,trap evolution and oil accumulation of the oil-bearing assemblage composed of the Cretaceous Yingcheng Formation(K1yc)and Denglouku Formation(K1d)in the Shuangcheng area,northern Songliao Basin,NE China,were analyzed by using the research methods for petroleum systems.The source rocks mainly exist in K1yc,with the organic matters mainly originated from lower aquatic organisms and algae,and reaching the grade of high-quality source rock in terms of organic abundance.The crude oil,which is characterized by low density,high freezing point and high wax content,is believed to have generated by the K1yc source rocks.The reservoir rocks include K1d sandstones and K1yc glutenites.The mudstone in the fourth member of K1d serves as the direct caprock of the oil reservoir.The oil was generated during the period between Yaojia Formation and Nenjiang Formation,and then accumulated during the periods of Nenjiang Formation and Paleogene–Neogene.The traps evolved in three stages:the late Yingcheng Formation,the late Quantou Formation and the late Nenjiang Formation,forming structural and structural-lithologic reservoirs.It is concluded that good source-reservoir-caprock assemblage,late hydrocarbon charging,short migration distance and stable tectonic setting are favorable factors for the formation of oil reservoirs.
文摘The petroleum paleo-productivity and generative potential of the Nkporo and Awgu shales in the Lower Benue Trough (LBT) were studied. Major oxides were determined using Spectro Ciros Inductively-coupled plasma optical emission spectrometer (ICP-OES) while trace and rare earth elements were determined using an ELAN 9000 Inductively-coupled plasma mass spectrometer (ICP-MS). The shales have Co/Ni ratios greater than 0.1 suggesting oil source rocks with more marine source input due to brief marine incursion in the transition zone after deposition. The very low Ni values and moderate V values, and a lack of correlation between the TOC and sulphur content, suggests that the organic matter is of terrestrial Type Ⅲ;and the very low paleo-productivity (Ba/Al and P/Ti ratios) suggests that the organic matter is of terrestrial origin. The low V/Ni values of the Nkporo and Awgu shales (Av. ≈ 4) and the high metal concentrations indicate a matured status. From the K/Rb ratios of the Nkporo (191–259) and Awgu shales (198–261), it can be deduced that the organic matter within the shales experienced a considerable loss of K and the shales are mature to generate gaseous hydrocarbons.
文摘This study considers the effect of Eichhornia Crassipes Biodiesel(ECB)blends on the performances,combustion,and emission characteristics of a direct injection compression ignition engine operated in a dual-fuel mode(DFM)and equipped with an Exhaust gas recirculation technique(EGR).In particular,a single-cylinder,four-stroke,water-cooled diesel engine was utilized and four modes of fuel operation were considered:mode I,the engine operated with an ordinary diesel fuel;mode II,the engine operated with the addition of 2.4 L/min of lique-fied petroleum gas(LPG)and 20%EGR;mode III,20%ECB with 2.4 L/min LPG and 20%EGR;mode IV,40%ECB with 2.4 L/min LPG and 20%EGR.The operation conditions were constant engine speed(1500 rpm),var-iation of load(25%,50%,75%,and 100%),full load,with a compression ratio of 18,and a time injection of 23°BTDC(Before top died center).With regard to engine emissions,carbon dioxide(CO_(2)),carbon monoxide(CO),hydrocarbons(UHC),and nitrogen oxide(NOX)were measured using a gas analyzer.The smoke opacity was measured using an OPABOX smoke meter.By comparing the results related to the different modes with mode I at full load,the BTE(Brake thermal efficiency)increased by 20.17%,11.45%,and 12.66%with modes II,III,and IV,respectively.In comparison to the results for mode II,the BTE decreased due to the combustion of ECB blends by 7.26%and 6.24%for mode III and mode IV,respectively,at full load.In comparison to mode II,the Brake specific energy consumption(BSEC)increased with the ECB substitution.With ECB blends,there is a noticeable decrease in the CO,CO_(2),and UHC emissions at a partial load.Furthermore,the 20%ECB has no effect on CO emissions at full load.For modes II and IV,the CO_(2)increased by 33.33%and 19%,respectively,while the UHC emissions were reduced by 14.49%for mode III and 26.08%for mode IV.The smoke of mode III was lower by 7.21%,but for mode IV,it was higher by 12.37%.In addition,with mode III and mode IV,the NOx emissions increased by 30.50%and 18.80%,respectively.