Laboratory Evaluation of Performance Recovery of Aged SBS-modified Asphalt Using Regenerants with Different Base Oil Components

In this study,the regenerative effects of different regenerants on aged SBS-modified asphalt from different perspectives were investigated,including their conventional properties,viscoelastic behavior,creep-related properties,and micromorphology.Base oils composed of different proportions of aromatic and saturated hydrocarbons as well as the styrene-butadiene-styrene(SBS)restorer were used to prepare the regenerants.The results showed that the components of the base oil of the regenerant played a crucial role in determining the characteristics and performance of the recycled SBSmodified asphalt.Regenerants containing a high proportion of aromatics dissolved the hard segment in the SBS restorer,thereby delaying the effect of a reduction in the regenerants on the performance of the aged asphalts at a high temperature.Regenerants containing a high proportion of saturates dissolved the soft segment in the SBS restorer to enhance the lowtemperature performance of the recycled asphalts.In addition,the stress sensitivity of the recycled asphalts increased with the fraction of aromatics in the regenerant.As the aromatic content of the base oil components of the regenerants increased and their saturate content decreased,the state of dispersion of the SBS phase in the recycled SBS-modified asphalts improved.The optimal content of aromatics in the base oil of the regenerants should be set in the range of 33%to 47%to ensure the adequate performance of the recycled asphalts and a high efficiency of the SBS restorer.

Simulation of Solvent Extraction for Naphthenic Lubricating Base Oils

Solvent extraction is the process of separating aromatics from vacuum distillates for the production oflubricating base oils. In this study, the authors use dimethyl sulfoxide (DMSO) instead of furfural as solvent, in light of itshigher selectivity, to obtain extracts with a high aromatic content for naphthenic lubricating base oils. We systematicallyinvestigated effects of the solvent-to-oil (S/O) ratio and extraction temperature on the yield of the extract, efficiency ofaromatic removal, and composition of the extracts and raffinates. The results showed that the aromatic content of extractsfor naphthenic oils could reach a high value of about 80%. The solvent maintained a high selectivity for aromatics fornaphthenic oils even under a high S/O ratio and a high extraction temperature. Moreover, the efficiency of aromatic removalfor naphthenic lubricating base oils could be enhanced by increasing either the S/O ratio or the extraction temperature,although these measures had limited effects in practice. Following this, we used the non-random two-liquid (NRTL) modelbased on the pseudo-component approach to simulate the liquid-liquid equilibrium of the system of DMSO + naphtheniclubricating base oils, and determined the parameters of binary interaction through regression based on the data on phaseequilibrium. The modeling results showed that the predicted yield, content of the solvent, and composition of the raffinatesand extracts were in good agreement with those obtained in the experiments. This validates the reliability of the model usedto represent the DMSO + naphthenic lubricating base oil system. Both the experimental data and the method of simulationreported here can help optimize the extraction of naphthenic lubricating base oils, and provide a better understanding of thecorresponding process.

Thermal oxidation of two aviation synthetic lubricant base oils

The thermal degradation of two synthetic lubricants base oils, poly-a-olefins （PAO） and di-esters （DE）, was investigated under oxidative pyrolysis condition and their properties were characterized in simulated ＂areo-engine＂ by comparing the thermal stability and identifying the products of thermal decomposition as a function of exposure temperature. The characterization of the products were performed by means of Fourier transform infrared spectrometry （FTIR）, gas chromatography/mass spectrometry （GC/MS） and viscosity experiments. The results show that PAO has the lower thermal stability, being degraded at 200℃ different from 300 ℃ for DE. Several by-products are identified during the thermal degradation of two lubricant base oils. The majority of PAO products consist of alkenes and olefins, while more oxygen-contained organic compounds are detected in DE samples based on GC/MS analysis. The related reaction mechanisms are discussed based on the experimental results.

Production of Quality Hydrogenated Base Oils through Isodewaxing Technology

This article presents the successful experience in adopting the Isodewaxing technology in the lube oil unit of Shanghai Gaoqiao refinery. In line with the demand of different crude slate for different reaction depth, and good match between the optimal product quality and the yield, the refinery has make strenuous efforts to optimize the operation and reduce the energy consumption to manufacture high-quality hydrogenated base stocks.

Influence of Different Hydrocarbon Molecules on Physical Properties of Mineral Base Oils

Different kinds of base oils with different viscosity were analyzed in this paper, including eight mineral base oils, alkylnaphthalene and three synthetic PAO oils. The influence of different hydrocarbon molecules on physical properties of mineral base oils was investigated, such as density(d), kinematic viscosity(KV), viscosity index(VI), etc. Possible reasons for some inconsistent phenomena in data processing were also theoretically analyzed in detail. The refractive indexes(RI), d and molecular weight(M) decrease linearly with the increase of paraffinic content other than KV, which declines exponentially. There are no clear relationships between physical properties of base oils and naphthenic content while polycyclic alkanes show a strong correlation with M and KV. The influence of aromatics on physical properties of base oils is just the opposite of paraffin's. VI of the base oils with low aromatics content increases linearly as their paraffinic contents rise when their carbon numbers are approximately equal. However, base oils with high aromatics content follow an utterly different rule, in which VI declines dramatically linearly with the increase in polycyclic aromatic content, which is the essential reason why naphthenic base oils all have terrible viscosity-temperature characteristics while paraffinic base oils usually do not.

Prediction of Lubricant Physicochemical Properties Based on Gaussian Copula Data Expansion

The composition of base oils affects the performance of lubricants made from them.This paper proposes a hybrid model based on gradient-boosted decision tree(GBDT)to analyze the effect of different ratios of KN4010,PAO40,and PriEco3000 component in a composite base oil system on the performance of lubricants.The study was conducted under small laboratory sample conditions,and a data expansion method using the Gaussian Copula function was proposed to improve the prediction ability of the hybrid model.The study also compared four optimization algorithms,sticky mushroom algorithm(SMA),genetic algorithm(GA),whale optimization algorithm(WOA),and seagull optimization algorithm(SOA),to predict the kinematic viscosity at 40℃,kinematic viscosity at 100℃,viscosity index,and oxidation induction time performance of the lubricant.The results showed that the Gaussian Copula function data expansion method improved the prediction ability of the hybrid model in the case of small samples.The SOA-GBDT hybrid model had the fastest convergence speed for the samples and the best prediction effect,with determination coefficients(R^(2))for the four indicators of lubricants reaching 0.98,0.99,0.96 and 0.96,respectively.Thus,this model can significantly reduce the model’s prediction error and has good prediction ability.

Inverse Gas Chromatographic Study of the Oxidation Stability of Lubricating Base Oils via Solubility Parameter Calculations

The Flory-Huggins interaction parameter(χ1,2∞) and solubility parameter(δ2) and its hydrogen bonding sensing component(δh) were determined using inverse gas chromatography(IGC).These parameters were successfully used in the probes of chemical changes that occur during the oxidation of naphthenic and paraffinic base oils in a GC column.Changes in χ1,2∞ values reflect the different types of intermolecular interactions(dispersive,polar,hydrogen bonding) of the given lubricating base oil during oxidation.The obtained results showed that δh component of solubility parameter is the most important parameter for probing the oxidative-chemical changes during the oxidation of given lubricating oils.

Interaction of Chloroprene and Nitrile-Butadiene Rubber with Lubricating Greases and Base Oils

The present communication addresses compatibility of two synthetic rubber types,chloroprene and nitrile-butadiene ones,with a number of base oils of petroleum origin and lubricating greases produced thereof.Four base oils,including three naphthenic products with varying degrees of refining and one paraffinic product,were compared with each other in terms of their effect on the rubbers.Degenerative changes occurring in the rubbers on contact with the oils and greases were studied using accelerated ageing tests.Alterations in rubber parameters,such as hardness,weight and glass transition temperature,caused by interaction with oil were monitored.The main physicochemical mechanisms standing behind the changes observed in the rubber properties were found to be(i) migration of plasticizer from rubber into the oil phase,(ii) absorption of oil by rubber,and(iii) oxidation of rubber.An increase in glass transition temperature(Tg) of rubber aged in a base oil or grease was considered as an indirect indication that the plasticizer had migrated out of rubber;the plasticizer accumulation in the oil phase being directly confirmed by gas chromatography.In order to suppress the plasticizer migration,oil additivation with dioctyl adipate(DOA),a common plasticizer used in rubber formulations,was attempted.However,the DOA-additivated oils,while reducing plasticizer migration,were found to cause more swelling than the original oils in the case of chloroprene rubber.As an alternative,replacement of DOA by an alkylated aryl phosphate in nitrile-butadiene rubber formulations was considered,but it did not solve the problem either.The results of this study suggest conclusively that the type of rubber,the plasticizer,and the base oil are all the crucial parameters that should be considered when matching rubber with oil in real-life applications.Interaction of rubber with base oils and with greases produced thereof is largely controlled by(i) solvency of the base oils and(ii) polarity and cross-linking density of the rubber matrix.Higher temperatures accelerate ageing in all cases.

Base-transesterification process for biodiesel fuel production from spent frying oils

The concept of converting recycled oils to clean biodiesel aims towards reducing the amount of waste oils to be treated and lowering the cost of biodiesel production. Samples of waste oils were prepared from Spent Frying oil collected from local hotels and restaurants in Khartoum, Sudan. Selected methods to achieve maximum yield of biodiesel using the waste feedstock were presented and compared. Some properties of the feedstock, such as free fatty acid content and moisture content, were measured and evaluated. Biodiesel yield recovery obtained, from Base-transesterification process about 92%. Produced Biodiesel specifications were also analyzed and discussed in Base-transesterification process. Kinematic viscosity of biodiesel was found to be 5.51 mm2·s?1 at 40?C, the flash point was 174.2?C and Cetane No of 48.19. Biodiesel was characterized by its physical and fuel properties according to ASTM and DIN V 51606 standards.

Oil Saturation Is Determined by Different Experimental Methods

Oil saturation was an important parameter of reservoir evaluation, which had important guiding significance for oilfield development. In this paper, the oil saturation of tight oil in G area was studied, and the original oil saturation of the study area was studied by using the comprehensive experimental method. The original oil saturation of tight oil in the study area was determined by J function method, rock electricity method and oil-based mud coring method. The results showed that through the comparison of three experimental methods, it could be concluded that the J function method leads to the low value of oil saturation in the study area. The oil-based mud coring method was more suitable for the determination of oil saturation in this area than the other two methods because it needs to meet too many conditions and the calculation results were also low. G area was located in Qili Village, Ordos Basin.

Hydrocracking diversity in n-dodecane isomerization on Pt/ZSM-22 and Pt/ZSM-23 catalysts and their catalytic performance for hydrodewaxing of lube base oil

Nobel metallic Pt/ZSM-22 and Pt/ZSM-23 catalysts were prepared for hydroisomerization of normal dodecane and hydrodewaxing of heavy waxy lube base oil.The hydroisomerization performance of n-dodecane indicated that the Pt/ZSM-23 catalyst preferred to crack the C-C bond near the middle of n-dodecane chain,while the Pt/ZSM-22 catalyst was favorable for breaking the carbon chain near the end of n-dodecane.As a result,more than 2%of light products(gas plus naphtha)and3%more of heavy lube base oil with low-pour point and high viscosity index were produced on Pt/ZSM-22 than those on Pt/ZSM-23 while using the heavy waxy vacuum distillate oil as feedstock.

Tribological Properties of Few-layer Graphene Oxide Sheets as Oil-Based Lubricant Additives

The performance of a lubricant largely depends on the additives it involves. However, currently used additives cause severe pollution if they are burned and exhausted. Therefore, it is necessary to develop a new generation of green additives. Graphene oxide（GO） consists of only C, H and O and thus is considered to be environmentally friendly. So the tribological properties of the few-layer GO sheet as an additive in hydrocarbon base oil are investigated systematically. It is found that, with the addition of GO sheets, both the coefficient of friction（COF） and wear are decreased and the working temperature range of the lubricant is expanded in the positive direction. Moreover, GO sheets has better performance under higher sliding speed and the optimized concentration of GO sheets is determined to be 0.5wt%. After rubbing, GO is detected on the wear scars through Raman spectroscopy. And it is believed that, during the rubbing, GO sheets adhere to the sliding surfaces, behaving like protective films and preventing the sliding surfaces from contacting with each other directly. This paper proves that the GO sheet is an effective lubricant additive, illuminates the lubrication mechanism, and provides some critical parameters for the practical application of GO sheets in lubrication.

The Role of Diesel Soot in the Tribological Behavior of 150SN Base Oil

The diesel soot was collected from diesel engine exhaust pipe. The morphology and structure of the collected diesel soot was characterized by HRTEM, XRD and XPS and its tribological behavior was investigated by a SRV IV oscillating reciprocating friction and wear tester. Test results showed that the tribological behavior of diesel soot was largely influenced by the test load. Under a low load, the diesel soot could reduce the wear volume of the disc. While under a high load, the diesel soot could reduce the friction coefficient of base oil. Based on the characterization of the worn scars by the SEM technique, the 3D surface profiler and the Raman spectroscopy, it was assumed that the core-shell structure of diesel soot with several graphitic layers played important roles. On one hand, its spherical and special structure could make it roll between friction pairs to reduce wear under a low load. On the other hand, its outer-shell graphite layers could be peeled off to form lubrication film to reduce friction under a high load and shear force.

The Influence of Paraffinic Base Oil on Low-temperature Viscosity of Naphthenic Base Oil

Low-temperature viscosity of lube oils mixed with paraffinic base oil and naphthenic base oil at different mass ratios has been tested by experiments. The influence of paraffinic base oil on the performance of naphthenic base oil was investigated by studying the low-temperature viscosity of tested oils. The viscosity of lube oils increased with an increasing content of high-viscosity paraffinic base oil in the oil mixture. And the low-temperature viscosity was less influenced when the content of paraffinic base oil in the mixture was insignificant. In order to reduce the cost for formulating lubricating oil, a small fraction of paraffinic base oil can be added into naphthenic base oil as far as the property of lubricating oil can meet the specification. According to the study on low-temperature viscosity of the oil mixed with paraffinic base oil and naphthenic base oil, a basic rule was worked out for the preparation of qualified lubricating oils.

Selection of Sinopec Lubricating Oil Producing Bases by Using the AHP Model

The factors affecting the developmcnt of Sinopec lubricating oil were analyzed in this paper, and an analytic hierarchy process （AHP） model for selecting lubricating-oil producing bases was developed. By using this model, nine lubricating oil producing companies under Sinopec were comprehensively evaluated. The evaluation result showed that the Maoming Lubricating Oil Company （Guangdong province）, Jingmen Lubricating Oil Company （Hubei province） and Changcheng Lube Oil Company （Beijing） are top three choices, and should be developed preferentially for the development of Sinopec producing bases of lubricating oil in the future. The conclusions provide the theoretical basis for selecting lubricating oil producing bases for decision makers.

Specifications and Quality of Lube Oil Base Stocks in China

The Chinese standard Q/SHR001-95 for base stocks is compared with the APIspecifications. The viscosity-temperature characteristics of base stock required by lube oil in useand market demand on oil quality are analyzed. The quality indicators of base stocks in China andother countries are compared. A new classification of base stocks in response to the requirements ofmodern lube oil is proposed and the research on new technology to produce premium base stocksmeeting API specification is recommended on the basis of current base stock processing technology.

Coal Tar Derived Metallocene Catalyst for Polymerization of 1-Decene into Low-viscosity Poly-α-Olefin Lubricating Base Oil

The production of poly-α-olefins(PAOs)has attracted attention due to their excellent viscosity-temperature dependence,wear characteristics,oxidative properties,and high thermal stability.In this study,indene extracted during coal tar refining was used as a raw material to synthesize a bis(indenyl)zirconium dichloride metallocene catalyst.A PAO with low viscosity and a high viscosity index was produced via the oligomerization of 1-decene in the presence of both the prepared metallocene and a methylaluminoxane(MAO)co-catalyst.Notably,the effects of different synthesis reaction parameters,such as Al:Zr ratio,amount of catalyst,and reaction temperature,on the conversion ratio and product selectivity were investigated in detail.The produced PAO was thoroughly characterized using Fourier-transform infrared,^(13)C,and^(1)H nuclear magnetic resonance spectroscopies;gas chromatography;and viscosity measurements.At 70℃,the metallocene catalyst created more stable active sites.In addition,the alkylation effect of MAO was noticeable.Interestingly,the obtained catalysis results demonstrated that a high conversion ratio of~93%was achieved at a low reaction temperature of 70℃,with a catalyst dosage of 0.0848 mmol and Al:Zr ratio of 8.48mmol:0.0848mmol.Moreover,under these optimal conditions,the kinematic viscosity of PAO was 4.25 mm2/s at 100℃,and the viscosity index was 139,indicating good viscosity-temperature properties.

Synthesis and Characterisation of a Biolubricant from Cameroon Palm Kernel Seed Oil Using a Locally Produced Base Catalyst from Plantain Peelings

Biolubricant was synthesized from Cameroon palm kernel oil (PKO) by double transesterification, producing methyl esters in the first stage which were then transesterified with trimethylolpropane (TMP) to give the PKO biolubricant in the presence of a base catalyst obtained from plantain peelings (municipal waste). The yields from both catalysts were significantly similar (48% for the locally produced and 51% for the conventional) showing that the locally produced catalyst could be valorized. The synthesized biolubricant was characterized by measuring its physical and chemical properties. The specific gravity of 1.2, ASTM color of 1.5, cloud point of 0°C, pour point of -9°C, viscosities at 40°C of 509.80 cSt and at 100°C of 30.80 cSt, viscosity index of 120, flash point greater than 210°C and a fire point greater than 220°C were obtained. This synthesized biolubricant was found to be comparable to commercial T-46 petroleum lubricant sample produced industrially from mineral sources. We have therefore used local materials to produce a biolubricant using a cheap base catalyst produced from municipal waste.

Modification of methyl oleate for silicon-based biological lubricating base oil

A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative of methyl oleate.Trimethylsilylation reaction was introduced to further improve methyl oleate oxidation stability and lubricity after epoxidation and open-ring reactions.The order of effectiveness of acid binding agent was N,N-diisopropylethylamine(DIEA) > pyridine > diethylamine > triethylamine,and the effects of various parameters on the trimethylsilylation reaction as well as on the silicon-oxygen bond stability and reaction yield were studied.A maximum yield of 34.54%was achieved at hydroxyl/trimethyl chlorosilane/DIEA molar ratio of1:1.25:1,reaction temperature 40℃,reaction time 1.5 h.

CRISPR-based genome editing technology and its applications in oil crops

Oil crops,mainly comprised of soybean,rapeseed,groundnut,sunflower and etc.,have provided substantial edible oil and other tremendous nutrients for human beings,as well as valuable biofuels for associated industries.The genetic improvement of significant oil crops and/or domesticating novel high-yielding oil crops are in urgent need to cope with the ever-increasing demand for various oil crop products.CRISPR(Clustered Regularly Interspaced Short Palindromic Repeats)-based genome editing technology,born a few years ago,edits stretches of DNA in a targeted and RNA-dependent fashion.The Characteristics of targeted mutagenesis and easy manipulation owned by the technology make it have been applied to many plants and exhibited great potential in the genetic improvement of many important oil crops.In the face of growing need for oil crop products and the rapid developments in CRISPR-based genome editing technology,a critical review regarding the technology and its application in oil crops is badly required to provide references for the better use of this technology to modify the oil crops for higher yield.In this review paper,we briefly described the CRISPR-based genome editing technology and summarized its applications and future prospects in oil crops.