Polarization readout analysis for multilevel phase change recording by crystallization degree modulation

Four different states of Si15Sb85 and Ge2Sb2Te5 phase change memory thin films are obtained by crystallization degree modulation through laser initialization at different powers or annealing at different temperatures. The polarization characteristics of these two four-level phase change recording media are analyzed systematically. A simple and effective readout scheme is then proposed, and the readout signal is numerically simulated. The results show that a high-contrast polarization readout can be obtained in an extensive wavelength range for the four-level phase change recording media using common phase change materials. This study will help in-depth understanding of the physical mechanisms and provide technical approaches to multilevel phase change recording.

Preparing and Studying of Phase Change Energy Storage Materials

The thermal energy storage phase change material used for building has been prepared with a few of fatty acids based on the principle of binary low eutectic point. The thermal behaviors such as phase transition temperature and enthalpy of compound energy storage material are researched through differential scanning calorimeter(DSC) and scanning electron microscope(SEM) . The results show that the thermal energy storage phase change composite material can be used in the wall panels well as its higher latent heat.

Novel and durable composite phase change thermal energy storage materials with controllable melting temperature

The development of high temperature phase change materials(PCMs)with great comprehensive performance is significant in the future thermal energy storage system.In this study,novel and durable Al-Si/Al_(2)O_(3)-Al N composite PCMs with controllable melting temperature were successfully synthesized by using pristine Al powder as raw material and tetraethyl orthosilicate as SiO_(2)source.The Al_(2)O_(3)shell and Al-Si alloy were in-situ produced via the substitution reaction between molten Al and SiO_(2).Importantly,the crack caused by the incomplete encapsulation of the Al_(2)O_(3)shell could repair itself by the nitridation reaction of internal molten Al and thereby forming a highly dense Al_(2)O_(3)-Al N composite shell.The produced dense Al_(2)O_(3)-Al N composite shell could significantly improve the thermal cycling stability of composite PCMs,and thus,the thermal storage density decrease of the Al-Si/Al_(2)O_(3)-Al N(59.8 J/g to77.7 J/g)was far less than that of the Al-Si/Al_(2)O_(3)(118.5 J/g)after 3000 thermal cycles.Moreover,the synthesized Al-Si/Al_(2)O_(3)-Al N still exhibited a controllable melting temperature(571.5-637.9℃),relatively high thermal storage density(105.6-150.7 J/g),great dimensional stability and structural stability after3000 thermal cycles.Hence,the synthesized Al-Si/Al_(2)O_(3)-Al N composite PCMs,as promising preferential thermal energy storage materials,can be stably used in the energy utilization efficiency improvement of various systems for more than 6 years.

Microencapsulation of stearic acid with polymethylmethacrylate using iron(Ⅲ) chloride as photo-initiator for thermal energy storage

Aiming to identify the validity of fabricating microencapsulated phase change material(PCM) with polymethylmethacrylate(PMMA) by ultraviolet curing emulsion polymerization method using iron(III) chloride as photoinitiator,SA/PMMA microcapsules were prepared and various techniques were employed to determine the ignition mechanism,structural characteristics and thermal properties of the composite.The results shown that the microcapsules containing SA with maximum percentage of 52.20 wt% formed by radical mechanism and only physical interactions existed in the components both in the prepared process and subsequent use.The phase change temperatures and latent heats of the microencapsulated SA were measured as 55.3 °C and 102.1 J·g^(-1) for melting,and 48.8 °C and 102.8 J·g^(-1) for freezing,respectively.Thermal gravimetric analysis revealed that SA/PMMA has good thermal durability in working temperature range.The results of accelerated thermal cycling test are all shown that the SA/PMMA have excellent thermal reliability and chemical stability although they were subjected 1000 melting/freezing cycles.In summary,the comparable thermal storage ability and good thermal reliability facilitated SA/PMMA to be considered as a viable candidate for thermal energy storage.The successful fabrication of SA/PMMA capsules indicates that ferric chloride is a prominent candidate for synthesizing PMMA containing PCM composite.

A one-step method for producing microencapsulated phase change materials

This short communication reports our recent work on the synthesis and characterisation ofmicrocapsules of phase change materials using silica as the shell material through a one-step method. The method uses no surfactants or dispersants for stabilising the capsules. The results show that the one-step method allows the tuning of the size and polydispersity of the capsules, and the use of different core materials. Analyses of the capsules show that they contain about 65% phase change materials. The results also suggest no need for a stabilising agent due to self-stabilisation by the amine groups. Further work is underway to investigate the mechanical and thermal properties of the microcapsules and the scale-up of the method.

Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage

This paper discusses composite materials based on inorganic salts for medium- and high-temperature thermal energy storage application. The composites consist of a phase change material （PCM）, a ceramic material, and a high thermal conductivity material. The ceramic material forms a microstructural skeleton for encapsulation of the PCM and structural stability of the composites; the high thermal conductivity material enhances the overall thermal conductivity of the composites. Using a eutectic salt of lithium and sodium carbonates as the PCM, magnesium oxide as the ceramic skeleton, and either graphite flakes or carbon nanotubes as the thermal conductivity enhancer, we produced composites with good physical and chemical stability and high thermal conductivity. We found that the wettability of the molten salt on the ceramic and carbon materials significantly affects the microstructure of the composites.

Thermal Cycling Stability of Mg-25Al-15Zn-14Cu PCM

Thermal cycling tests of repeated melting/freezing processes were performed to check the thermal stability of Mg-25Al-15Zn-14 Cu alloy as phase change thermal storage material（PCM）. Latent heat storage capacity and phase transition temperature of the PCMs were determined by differential scanning calorimetry（DSC） technique as a function of repeated thermal cycles such as 0, 100, 200, and 1000. The present work also comprised the investigation of the density and microstructure of Mg-25Al-15Zn-14 Cu alloy before and after thermal cycles by using the hydrostatic method and optical microscopy（OM）, X-ray diffraction（XRD）, and electron probe microanalysis（EPMA）, respectively. The results show that the melting temperature of alloy after 1000 thermal cycles is 415.1 ℃ and the latent heat value is 190.4 J/g. Compared with the original alloy, the phase transition temperature will increase by 1.87% and the value of phase change latent heat will decrease by 7.35%, which are in a suitable range. Therefore, Mg-25Al-15Zn-14 Cu alloy has a good thermal reliability in terms of the change in its thermal properties with respect to thermal cycling for 1000, and can be used for a middle-temperature thermal storage utility.