Correlation Studies of Rare Earth Elements in Syntectonic Intrusions of Strike-Slip Stage along Southern Segment of Tan-Lu Fault Zone

Intrusions in the Zhangbaling uplift zone and the eastern margin of the Dabie orogenic belt belong to the syntectonic intrusions developed during the strike-slip stage in the southern segment of the Tan-Lu fault zone. However, characteristics of rare earth elements show that intrusions in the Zhangbaling uplift zone have the characteristics of mantle source type and those in the eastern margin of Dabie belt are the typical crust source type. Therefore, Au-deposits related to the intrusions in the Zhangbaling uplift zone are developed better than those in the eastern margin of the Dabieshan. The research results of the rare earth elements coincide with the studies of geophysics, tectonic setting and stable isotope. It is further indicated that the rare earth elements offer effective approach to tracing the material sources of magmatic rocks.

Transient Fault Locating Method Based on Line Voltage and Zero-mode Current in Non-solidly Earthed Network

为解决配电网小电流接地故障时故障点定位困难的问题，提出一种基于线电压和零模电流暂态分量的故障定位新方法。该方法借助馈线自动化（feeder automation，FA）系统实现，不需要额外增加设备。馈线终端检测线电压和零模电流信号，利用暂态线电压的希尔伯特变换与暂态零模电流的乘积计算故障方向参数，FA主站根据故障点前后方向参数极性相反的特征确定故障点所在的线路区段。介绍基于线电压的小电流接地故障检测和接地故障相确定的算法。数字仿真与试验结果表明该方法是正确可行的。

Method of Fault Area ＆ Section Location for Non-solidly Earthed Distribution System

中国中压配电网以架空线为主，多为小电流系统，单相接地故障占到电网故障总数的80％以上，但中国配网自动化系统基本上没有小电流接地故障定位功能，使配网自动化系统在提高可靠性的作用上大打折扣。给出一种小电流接地故障区段定位新方法，在线路上配置广域相量测量固定测点，获取小电流电网单相接地故障特征信息。基于测点相邻矩阵区段起始测点标识向量和故障路径标识向量概念，提出确定故障区间边界节点算法。物理模拟实验和挂网测试表明：该故障分区分段定位方法能够在线求解小电流接地故障段边界节点，缩小线路维护巡视范围。确定故障区间边界节点算法还可用于确定故障区相关负荷开关，为线路维护和馈线自动化提供依据。

Co-seismic Coulomb stress changes on the northern Tanlu fault zone caused by the Tohoku-Oki M_(W)9.0 earthquake

Based on the spherical earth dislocation theory and a fault slip model of the Tohoku-Oki M_(W)9.0 earthquake,the co-seismic Coulomb failure stress changes(ΔCFS)on the northern Tanlu fault zone at depths of 0–40 km are calculated.By comparing two sets of results from the spherical earth dislocation theory and the semi-infinite space one,the effect of earth curvature on the calculation results is analyzed quantitatively.First,we systematically summarize previous researches related to the northern Tanlu fault zone,divide the fault zone as detailed as possible,give the geometric parameters of each segment,and establish a segmented structural model of the northern Tanlu fault zone.Second,we calculate the Coulomb stress changes on the northern Tanlu fault zone by using the spherical earth dislocation theory.The result shows the Coulomb stress changes are no more than 0.003 MPa,which proves the great earthquake did not significantly change the stress state of the fault zone.Finally,we quantitatively analyze the disparities between the results of semi-infinite space dislocation theory and the spherical earth one.The average disparity between them is about 7.7%on the northern Tanlu fault zone and is 16.8%on the Fangzheng graben,the maximum disparity on this graben reaches up to 25.5%.It indicates that the effect of earth curvature can not be ignored.So it’s necessary to use the spherical earth dislocation theory instead of the semi-infinite space one to study the Coulomb stress change in the far field.

An evidence for earthquake ocurence time related with geologic structure──Relations between local mean lunar times of earthquake ocurence and their fault trends

The relation between the local mean lunar time τ of earthquake occurrence and their fault trends is studied in this paper. The local mean lunar times τ of 53 earthquakes in 24 groups are calculated. Because the tidal generation force arisen by the moon is a cyclic function of about 12 hours 25 minutes in the main, the two tidal generation forces anywhere in the earth arising by the moon are equal in general when the moon lies to the two sites of 180° interval of local mean lunar time. Based on this phenomenon the values Δ τ of τ 1- τ 2 or τ 1-τ 2±180° of two earthquakes occurring repetitiously in the same place are also calculated. The calculated results show that if the fault trends of the two earthquakes in the same place is near, the Δ τ is usually smaller and if the fault trends of the two ones is not near, the Δ τ is usually larger and the distribution of the local mean lunar time τ of earthquakes in different places is dispersive even if fault trends of these earthquakes are near, and the τ does not concentrate on the lower and upper transit of the moon. The above phenomena clear up that the triggering earthquake of earth solid tide arisen by the moon is relative with the fault trends of earthquakes and we ought to think over the difference of environmental conditions of earthquake preparation of each seismogenic zone and can not make statistics to earthquakes in different places when we study the relation between the solid earth tide arisen by the moon and earthquakes.

A New Transient Impedance-Based Algorithm for Earth Fault Detection in Medium Voltage Networks

This paper presents a new earth-fault detection algorithm for unearthed （isolated） and compensated neutral medium voltage （MV） networks. The proposed algorithm is based on capacitance calculation from transient impedance and dominant transient frequency. The Discrete Fourier Transform （DFT） method is used to determine the dominant transient frequency. The values of voltage and current earth modes are calculated in the period of the dominant transient frequency, then the transient impedance can be determined, from which we can calculate the earth capacitance. The calculated capacitance gives an indication about if the feeder is faulted or not. The algorithm is less dependent on the fault resistance and the faulted feeder parameters; it mainly depends on the background network. The network is simulated by ATP/EMTP program. Several different fault conditions are covered in the simulation process, different fault inception angles, fault locations and fault resistances.

Single-phase earth fault current distribution between optical fiber composite overhead ground wire and ordinary ground wire in transmission system

It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of single-phase earth fault current distribution and case verification were accomplished by using the loop method.Influences of some factors,such as single-phase earth fault location and ground resistance of poles,on short-circuit current distribution were discussed.Results show that:1) results of the loop method conform to those of double sided elimination method;2) the fault location hardly influences macro-distribution of short-circuit current.However,current near fault location is evidently influenced;and 3) the short-circuit current distribution is not so sensitive to the ground resistance of poles.

A Novel Transient Current-Based Differential Algorithm for Earth Fault Detection in Medium Voltage Distribution Networks

This paper presents a novel transient current differential algorithm for earth fault detection in unearthed （isolated） and compensated neutral medium voltage （MV） networks. The proposed algorithm uses the transient residual currents, which are very sensitive for earth faults detection. The transient values of residual currents are calculated for each feeder in the network and used as an earth fault indicator. The flow of residual currents is investigated. It is found that the residual current for the faulted feeder is equal to the summation of all residual currents for all other healthy feedersl Based on this investigation, a differential technique is proposed. A percentage restrain performance is proposed to ensure the selectivity and security of the algorithm. The transient algorithm is very sensitive for earth fault incidence. To apply the proposed algorithm, the residual currents can be measured easily by one sensor for each feeder with no need to voltage measurement. The proposed algorithm is less dependent on the fault resistance and the faulted feeder parameters. The network is simulated by ATP/EMTP program. Different fault conditions are covered in the simulation process： different fault inception angles, fault locations and fault resistances.

全球天然氢气勘探开发利用进展及中国的勘探前景

在全球能源脱碳背景下,天然氢气作为一种一次能源,因其零碳、可再生的优点而备受关注,但中国目前还未开展专门针对天然氢气的勘探工作。通过介绍全球已知高含量天然氢气(体积分数大于10%)气藏的主要形成地质环境及成因类型,系统总结了天然氢气富集的有利地质条件,并结合国外天然氢气的勘探开发现状,评价了中国天然氢气的勘探前景。研究结果表明:(1)全球高含量天然氢气主要发育于蛇绿岩带、裂谷和前寒武系富铁地层中,且以无机成因为主,富铁矿物的蛇纹石化过程是天然氢气最主要的成因来源,其次为地球深部脱气和水的辐解。(2)优质的氢源与良好的运移通道是氢气富集的前提,而盖层的封盖能力是天然氢气能否成藏的关键要素;天然氢气作为伴生气时,传统盖层对其具备封盖能力,但当其含量较高时,传统盖层可能难以形成有效封盖;裂谷环境、蛇绿岩发育区以及断裂发育的前寒武系富铁地层是富氢气藏的勘探有利区。(3)国外多个国家和地区已制定了天然氢气的勘探开发和利用计划,其中,马里已实现天然氢气的商业开采,美国、澳大利亚也已成功钻探天然氢气勘探井。(4)中国高含量氢气区与富氢地质条件高度匹配,天然氢气勘探前景良好,郯庐断裂带及周缘裂陷盆地区、阿尔金断裂带及两侧盆地区、三江构造带—龙门山断裂带及周缘盆地区的天然氢气勘探潜力较大;中国应尽快开展天然氢气普查工作,加强氢气成藏过程研究和潜力评价,并进行勘探技术、开采分离技术和储运技术的攻关,为天然氢气的大规模开发利用做好技术储备。

郯庐断裂转换段新沂地裂缝成生机理及构造意义

新沂地区处于郯庐断裂带转换段的关键部位,自20世纪70年代以来在新沂地区共发现地裂缝灾害点28处。这些地裂缝以群发的形式发育在南马陵山以西、沂河—骆马湖以东的区域内,地裂灾害影响区面积达100 km^(2)。新沂地裂缝与地层结构、地震活动、地下水开采等因素有着千丝万缕的联系,对其研究形成了多种观点。利用实地调查与勘探手段,新近查明了新沂地裂缝的基本特征,它们具有走向一致性、纵向尖灭性、局部群发性等特点,且与邻近断裂(郯庐断裂带次级断裂F3)具有高度一致性,属于区域构造控制型地裂缝。以新沂地区地质构造为原型,构建了逆断层作用下地裂缝成生物理试验模型。试验结果表明,随着逆断层断距加大而依次呈剪裂段、离层段、弯裂段等发展过程。结合新沂地区“地堑地垒地堑”组合结构,新沂地裂缝的成因机制可概括为“跷跷板”构造模型,在构造应力、自重应力、地下水波动等作用下,下沉段受挤压,上升段因抬升而弯裂,从而形成地裂缝。研究新沂地区地裂缝,对揭示郯庐断裂带“北中南”段构造变化和“深浅表”部结构联系具有重要的指示意义。

中强地震发震构造标志浅析——以2023年积石山M_(S)6.2地震为例

地震地表破裂是地震发生的重要特征,是研究地震动力学、构造变形的重要手段。一般认为,M6 3/4以上的地震才会形成地表破裂。但近年来,也有M6.0左右的地震发生了地表破裂。本文旨在探讨中强地震地表破裂的识别方法。中强地震发震构造的识别具有一定的挑战性,主要表现在以下几个方面:(1)中强地震地表破裂的规模(位错量、宽度、长度和深度)较小,容易被黄土层厚覆盖,掩盖地表破裂的痕迹,不易识别;(2)非构造成因裂缝干扰,使得难以区分构造成因地表破裂。本文以2023年积石山M_(S)6.2地震为例,对中强地震构造成因破裂的识别标志进行了初步分析,提出了以下识别标志:(1)地表破裂几何展布和剖面形态,地震伴生的次生灾害(滑坡、崩塌、砂土液化等)的线性分布为识别发震构造提供参考和线索;(2)地表破裂沿破裂走向呈现稳定地穿越不同地貌单元,至少穿越一条沟谷等低凹地貌;(3)地表破裂在地质剖面上表现出稳定的产状;(4)地表破裂伴生构造形态,地表沿破裂发育雁列式褶皱(挤压鼓包)与张裂缝交替出现的现象。本文提出的识别标志为中强地震发震构造的识别提供了新的思路。

近断层地震动作用下土石坝加速度分布研究

近断层地震动较远场地震动具有频率高、速度快、能量更加集中的特点,在短时间内会释放大量能量,对工程结构具有严重危害。规范提供的加速度分布系数不适用于高度超过150 m的大坝,随着技术不断进步,我国超过150 m的土石坝越来越多,规范已不能满足现有需求。基于中国台湾集集近断层地震动记录,建立随机脉冲型地震动模型,分别对高度为40 m、70 m、150 m和200 m的土石坝进行随机动力分析,研究坝体的动态分布系数。结果表明,近断层地震动的低频速度脉冲使坝体的加速度反应谱有较宽的敏感段,易覆盖坝体自振周期,显著增加坝体的加速度。该研究通过总结近断层区域土石坝的加速度分布规律,建议了近断层脉冲型地震动区域的土石坝坝体动态分布系数,为近断层高地震风险情况下土石坝的抗震理论和方法提供参考。

电动汽车用永磁同步电机失磁机理与选区渗重稀土研究

由于电动汽车用永磁同步电机(PMSM)具有高功率密度的设计要求,使得磁钢更易受到电磁以及高温影响致使出现不可逆失磁,为此常在磁钢制备时加入大量镝、铽等贵重稀土元素,但该方法使得磁钢材料价格激增。本文以一台“三角”型内置式永磁同步电机为研究对象,分别研究了温度、电枢电流大小以及弱磁角这三个因素对电机磁钢的失磁特性影响,进而确定磁钢的易失磁位置及失磁扩散规律。在此基础上,通过将电机磁钢材料的牌号更改为较低的牌号,并提出合理的选区渗重稀土设计方案,实现了在不损失电机性能的情况下,减少重稀土元素用量的目的。最后,提出一种适用于计算选区渗重稀土设计方案中最大内禀矫顽力提升倍数的方法,可为电动汽车用永磁同步电机磁钢减重稀土研发设计提供参考。

对地观测卫星编队协同容错姿轨耦合控制

面向对地观测场景下卫星编队的姿轨耦合特性和完全失效故障,提出了基于空间构型重构的协同容错控制方法。首先,根据对地观测的任务需求,分别建立了无故障情况下的卫星编队构型,以及故障发生后将故障卫星移出编队的构型重构方案,包括拓扑网络重构、卫星编号更新和编队构型重构算法;其次,根据上述构型,考虑外部干扰和姿态轨道耦合特性,设计了基于非奇异终端滑模控制的分布式控制律,使得编队在有限时间内稳定,即在故障发生前后卫星编队都可以实现对观测区域的协同覆盖;最后,分别通过数值仿真和实验验证表明了所提方法的有效性。

小电流接地配电网馈线单相接地故障零序阻抗特性分析

文章以暂态零序特征为着眼点,从频域角度对小电流接地系统发生单相接地故障后的特性进行详细探讨。从线路入端零序阻抗这一随频率变化的特征量入手,深入挖掘了配电网系统中各馈线零序阻抗的阻抗特性,详细探讨了零序阻抗的幅值、相角随频率的变化规律,并针对不同的中性点接地方式以及线路是否健全加以分析,为更好地利用零序暂态信号,提高故障检测正确率夯实了基础。最后通过PSCAD搭建仿真模型验证了该特性。

Google Earth在野外初步断裂调查中的应用

主要介绍了卫星影像技术及Google Earth的特点,通过工程实例说明了Google Earth作为卫星影像在野外断裂调查中发挥的作用,总结了Google Earth卫星影像的优劣。

基于绝缘套管的10 kV架空裸线接地故障监测与防治技术研究

树障问题是造成10 kV配电线路接地故障的主要原因,严重制约着末端配电线路的供电效率。针对10 kV架空线路穿越林木区频繁面临的接地现象,提出采取敷设带电流监测绝缘套管的方案对树障区裸线进行保护,以防止接地故障发生,降低配网线损,提升供电效率。首先分析了树障接地问题产生的机理;然后详细阐述了基于绝缘套管的接地故障监测与防治方法;第三,研制了带电流监测功能的简易型绝缘套管;最后,该成果在国网浙江省电力公司某配电线路试用,对该研究成果的实效进行了检验,获得了用户的好评。

基于Google Earth的浑河断裂带遥感影像解译分析

遥感解译分析是断裂调查和活动性研究的重要工作内容,通过清晰、完整的断裂线性影像判读并结合实际验证调查能够获得断裂构造展布、结构、规模和活动特征等多方面的参数。浑河断裂带发育于沈阳、抚顺及其以东的辽东山地,其Google Earth卫星数据分辨率可以达到1~2.5m至亚米级,客观上提供了进行浑河断裂带遥感解译分析的条件。分析表明,浑河断裂带可以划分为沈阳段、抚顺段、章党—南杂木段和南杂木—英额门东段等4个不同的断裂段,除沈阳段以外,其它各段均表现出清晰的断裂线性特征,对于微地貌形态具有比较明确的反映。抚顺段和南杂木—英额门东段均控制了浑河河谷的发育,但不同的是,抚顺段北支较之南支规模更大、活动性更强,章党—南杂木段和南杂木—英额门东段影像可辨识度较高,微地貌变化稳定、连续,可能具有较新的第四纪活动性。

一起电压互感器故障引起主变跳闸事故的分析及处理

针对某电厂发生的发电机出线侧电压互感器故障导致主变跳闸事故,对事故的整个过程进行了分析。通过对故障跳闸前和跳闸时的录波数据、保护跳闸报文以及故障设备的综合分析,判断本起事故是由于发电机出线侧电压互感器c相二次侧接地,进而导致电压互感器a、b相一次侧先后接地,最终演变为两相接地短路故障,并通过理论计算验证分析判断的正确性。在全面核查主设备参数时,又发现电压互感器的绝缘参数低于规程要求。为了彻底解决此问题,提出了相应的处理方案,采用国产电压互感器替换进口电压互感器。经过整改后,电压互感器的工频耐受电压水平得到了提高,从而提高了机组运行的可靠性和安全性。

基于零序导纳幅值比的同母两回线异相接地复故障选线方法

消弧线圈接地系统发生同母两回线异相接地故障时,常规选线装置存在准确率不高的问题。针对消弧线圈接地系统发生的同母两回线异相接地复故障选线难的问题,文中通过线路首端的零序电流和母线零序电压信息获得线路的零序导纳,分析消弧线圈接地系统发生同母两回线异相接地故障特征,发现故障线路零序导纳的幅值大于非故障线路零序导纳的幅值,在高阻接地时仍呈现出此特征。在此基础上提出了基于零序导纳幅值比的消弧线圈接地系统同母两回线异相接地复故障选线方法,利用故障线路与非故障线路零序导纳幅值的差异建立故障选线判据,将所有故障线路全部选出。PSCAD仿真结果表明,该选线方法准确率高,不受故障位置、消弧线圈补偿度的影响,具有较强的耐受过渡电阻的能力。