Design of Ka-Band Phased Array Antenna with Calibration Function

In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in the dual polarization separation mode.We have given out the schematic diagram for the proposed Ka-band antenna,where the Kaband antenna is in the form of waveguide slot array antenna,with 96 units in azimuth and 1 unit in distance.Each group of units is driven by a singlechannel Transmitter/Receiver(T/R)component,and the whole array contains 192 T/R components in total.The size of the T/R component is 55mm(length)×50mm(width)×5.8mm(height),3 Sub-micro Sub-Miniature Push-on(SSMP)blind sockets and a 21-core low-frequency socket are designed on the two sides of the T/R component.In order to meet the technical specifications of phased array antenna,the Ka-band transceiver component is designed based on Low Temperatrue Co-fired Ceramic(LTCC)technology to achieve miniaturization and lightweight.In our approach,the feed network includes two parts:transceiver network and calibration network.The transceiver network consists of 241:8 time-delay power dividers,12 two-way power dividers and 2 six-way time-delay power dividers.The power supply required by theKaband antenna unit is provided to each active component by the power module after Ka band wavelet control distribution.Simulation and measurement results are given in the form of standing wave and scanning capability.

A Novel 28 GHz Phased Array Antenna for 5G Mobile Communications

A novel phased array antenna consisting of 256 elements is presented and experimentally verified for 5G millimeter-wave wireless communications.The antenna integrated with a wave control circuit can perform real-time beam scanning by reconfiguring the phase of an antenna unit.The unit,designed at 28 GHz using a simple patch structure with one PIN diode,can be electronically controlled to generate 1 bit phase quantization.A prototype of the antenna is fabricated and measured to demonstrate the feasibility of this approach.The measurement results indicate that the antenna achieves high gain and fast beam-steering,with the scan beams within±60°range and the maximum gain up to 21.7 dBi.Furthermore,it is also tested for wireless video transmission.In ZTE Shanghai,the antenna was used for the 5G New Radio(NR)test.The error vector magnitude(EVM)is less than 3%and the adjacent channel leakage ratio(ACLR)less than−35 dBc,which can meet 5G system requirements.Compared with the conventional phased array antenna,the proposed phased array has the advantages of low power consumption,low cost and conformal geometry.Due to these characteristics,the antenna is promising for wide applications in 5G millimeter-wave communication systems.

Particle simulations on propagation and resonance of lower hybrid wave launched by phased array antenna in linear devices

In this work, we performed first-principles electromagnetic-kinetic simulations to study a phased antenna array and its interaction with deuterium plasmas within the lower hybrid range of frequency. We first gave wave accessibility and resonance results, which agree well with theoretical prediction. In addition, we further investigated the antenna power spectrum with different antenna phases in the presence of the plasma and compared it with that in a vacuum,which directly indicates wave coupling and plasma absorption. Furthermore, for the case with zero phasing difference, our simulation results show that, albeit the launch is away from the accessibility region, tunneling effect and mode conversion occurred, which enhanced coupling and absorption. Moreover, consistent interactions between the injected wave and the plasma concerning various antenna phase differences are shown. We presented the inchoate response of the plasma in terms of the launching directions. Our results could be favorable for the engineering design of wave heating experiments with a tunable phased antenna array in linear devices, such as simple magnetic mirrors or tandem mirrors.

Photonic microwave true time delays for phased array antennas using a 49 GHz FSR integrated optical micro-comb source[Invited]

We demonstrate significantly improved performance of a microwave true time delay line based on an integrated optical frequency comb source. The broadband micro-comb(over 100 nm wide) features a record low free spectral range(FSR) of 49 GHz, resulting in an unprecedented record high channel number(81 over the C band)—the highest number of channels for an integrated comb source used for microwave signal processing. We theoretically analyze the performance of a phased array antenna and show that this large channel count results in a high angular resolution and wide beam-steering tunable range. This demonstrates the feasibility of our approach as a competitive solution toward implementing integrated photonic true time delays in radar and communications systems.

Optical true time-delay for two-dimensional phased array antennas using compact fiber grating prism

A two-dimensional(2D)optical true-time delay(TTD)beam-forming system using a compact fiber grating prism(FGP)for a planar phased array antenna(PAA)is proposed.The optical beam-forming system mainly consists of a TTD unit based on the same compact FGP,one tunable laser for elevation beam steering,and a controlled wavelength converter for azimuth beam steering.A planar PAA using such2D optical TTD unit has advantages such as compactness,low bandwidth requirement for tunable laser sources,and potential for large-scale system implementations.The proof-of-concept experiment results demonstrate the feasibility of the proposed scheme.

Optical True Time Delay for Phased Array Antennas Composed of 2×2 Optical MEMS Switches and Fiber Delay Lines

We proposed an optical true time delay (TTD) for phased array antennas (PAAs) composed of 2×2 optical MEMS switches, single-mode fiber delay lines, and a fixed wavelength laser diode. A 3-bit TTD for 10 GHz PAAs was implemented with a time delay error less than ± 0.2 ps.

Reconfigurable Pattern Patch Antenna for Mid-Band 5G:A Review

New requirements in communication technologies make it imperative to rehash conventional features such as reconfigurable antennas to adapt with the future adaptability advancements.This paper presents a comprehensive review of reconfigurable antennas,specifically in terms of radiation patterns for adaptation in the upcoming Fifth Generation(5G)New Radio frequency bands.They represent the key of antenna technology for materializing a high rate transmission,increased spectral and energy efficiency,reduced interference,and improved the beam steering and beam shaping,thereby land a great promise for planar antennas to boost the mid-band 5G.This review begins with an overview of the underlying principals in reconfiguring radiation patterns,followed by the presentations of the implemented innovative antenna topologies to suit particular advanced features.The various adaptation techniques of radiation pattern reconfigurable planar antennas and the understanding of its antenna design approaches has been investigated for its radiation pattern enhancement.A variety of design configurations have also been critically studied for their compatibilities to be operated in the midband communication systems.The review provides new insights on pattern reconfigurable antenna where such antennas are categorized as beam steering antenna and beamshaping antennas where the operation modes and purposes are clearly investigated.The review also revealed that for mid-band 5G communication,the commonly used electronic switching such as PIN diodes have sufficient isolation loss to provide the required beam performance.

Material Equivalent Test Based on Dimensional Analysis for Fragment Penetrating Antenna Target

Phased array radar is the main sensor in a battlefield.Phased array antenna is the main execution unit of the phased array radar,and it greatly affects the reliability of the phased array radar. As a result,the fragment damaged antenna test is important.As the materials of phased array antenna are not easy to get,the fragment damaged antenna test is difficult to carry out. Then we present a study on this problem and introduce the principles of dimensional analysis to solve it. Firstly, the fragments damage antenna target dimensionless model is constructed. Secondly,the finite element analysis software ANSYS / LS-DYNA are used to carry out a large number of different materials simulation test for dimensional analysis. Finally,based on dimensional test analysis,the materials equivalent empirical model between different antennas target is presented in the same damage. The results of this study provide a feasible and valuable solution for different materials' target damaged test.

A Novel Millimeter-Wave Channel Measurement Platform for 6G Intelligent Railway Scenarios

This paper presented a novel millimeterwave channel measurement platform for the 6G intelligent railway.This platform used phased array antenna with 64 elements and can support instant bandwidth up to 1 GHz.Combined with improved multi-tone sounding signals,the platform can enhance dynamic measurement capability in high-speed railway scenarios.We performed calibration works about frequency flatness,frequency offset and proved platform reliability with channel emulator based closed-loop verification.We also carried out field trials in high-speed railway carriage scenarios.Based on measurement results,we extracted channel characteristic parameters of path loss,power delay profile and delay spread to further verify the field measurement performance of the platform.

满足运载火箭测控需求的Ka频段CTDRSS终端技术

To meet the application requirements for a Ka-band space-based TT&C terminal for a launch vehicle,this paper proposes the implementation scheme of a space-based TT&C terminal,analyzes and solves the miniaturized design of equipment and the key technology for high-efficiency heat dissipation.The phased array antenna test shows that without external heat dissipation measures,the phased array antenna can work for a long time to meet the working requirements of launch vehicle,which has been verified in the LM-8 mission,and has wide engineering application prospects.

Directional Modulation Based on a Quantum Genetic Algorithm for a Multiple-Reflection Model

Directional modulation is one of the hot topics in data security researches.To fulfill the requirements of communication security in wireless environment with multiple paths,this study takes into account the factors of reflections and antenna radiation pattern for directional modulation.Unlike other previous works,a novel multiple-reflection model,which is more realistic and complex than simplified two-ray reflection models,is proposed based on two reflectors.Another focus is a quantum genetic algorithm applied to optimize antenna excitation in a phased directional modulation antenna array.The quantum approach has strengths in convergence speed and the globe searching ability for the complicated model with the large-size antenna array and multiple paths.From this,a phased directional modulation transmission system can be optimized as regards communication safety and improve performance based on the constraint of the pattern of the antenna array.Our work can spur applications of the quantum evolutionary algorithm in directional modulation technology,which is also studied.

Analysis of airborne antenna using a FEM-UTD hybrid method

In this paper,the near-field vector components were used to combine the FEM method and the uniform-geometrical theory of diffraction(UTD)method for analyzing phased array antenna mounted on an airborne platform.First,HFSS,a set of software based on finite element method(FEM),was utilized to find the near-field vector components of the phased array antennas,and then these vector components were used as the source of the UTD method to get the disturbed radiation pattern.Numerical results show that the hybrid of the two methods not only extends the use of the UTD program,but also effectively solves this type of challenging problems.