A phosphrous-containing poly（aryl ether ketone） was synthesized derived from bisphenol-A and bis[4-（4- fluorobenzoyl）phenyl] phenyl phosphine oxide （FPPPO） by nucleophilic substitution reaction. The structure of...A phosphrous-containing poly（aryl ether ketone） was synthesized derived from bisphenol-A and bis[4-（4- fluorobenzoyl）phenyl] phenyl phosphine oxide （FPPPO） by nucleophilic substitution reaction. The structure of the polymer was characterized by FT-IR, ^1H-NMR and ^31p-NMR. The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature （Tg） of the polymer was 205℃, and the 5% weight loss temperature under nitrogen was 475℃. Good solubility of the polymer in organic solvents, such as N-methylpyrrolidone, dimethylformamide, dimethylacetamide, dimethylsulfoxide and chloroalkanes was observed, flexible film was obtained from the polymer＇s CH2Cl2 solution. The limiting oxygen index （LOI） of the PAEK was 40, which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.展开更多
A series of co-polyimide(PI)fibers containing phenylphosphine oxide(PPO)group were synthesized by incorporating the bis(4-aminophenoxy)phenyl phosphine oxide(DAPOPPO)monomer into the PI molecular chain followed by dry...A series of co-polyimide(PI)fibers containing phenylphosphine oxide(PPO)group were synthesized by incorporating the bis(4-aminophenoxy)phenyl phosphine oxide(DAPOPPO)monomer into the PI molecular chain followed by dry-jet wet spinning.The effects of DAPOPPO molar content on the atomic oxygen(AO)resistance of the fibers were investigated systematically.When the AO fluence increased from 0to 3.2×1020the mass loss of the fibers showed the dependence on DAPOPPO molar content in co-PI fibers.The PI fiber containing 40%DAPOPPO showed lower mass loss compared to those containing 0%and 20%DAPOPPO.At higher AO fluence,the higher DAPOPPO content gave rise to dense carpet-like surface of fibers.XPS results indicated that the passivated phosphate layer was deposited on the fiber surface when exposed to AO,which effectively prevented fiber from AO erosion.With the DAPOPPO content increasing from 0%to 40%,the retentions of tensile strength and initial modulus for the fibers exhibited obvious growth from 44%to 68%,and 59%to 70%,after AO exposure with the fluence of 3.2×1020The excellent AO resistance benefits the fibers for application in low Earth orbit as flexible construction components.展开更多
Aging of a solid composite propellant containing HTPB/AP/AL was performed in order to validate the conformance of the accelerated aging data to the Arrhenius law. The main objective of the work was to examine the infl...Aging of a solid composite propellant containing HTPB/AP/AL was performed in order to validate the conformance of the accelerated aging data to the Arrhenius law. The main objective of the work was to examine the influence of the aziridine bonding agents family on the propellant aging. Aging of the prepared propellant samples was conducted as follows: 1. Four samples, one free of bonding agents, and three containing aziridine based bonding agents MAPO,HX-752, MAT4 were aged at 65°C. 2. Another four samples based on HX-752, MAT4 with different curing agents were aged at 65°C. The measured mechanical properties of the free bonding agent propellant samples were very far from the specifications and this illustrates the importance of the bonding agents in both the preparation and the aging phases.The prepared bonding agent 'MAT4' gave remarkable improvements of the mechanical properties comparing with HX-752 and MAPO. The aziridine bonding agents family inhibited the rate of decomposition of the propellant during the aging periods and supported the propellant matrix against decomposition at the elevate temperatures. Using of HMDI as curing agent gave slight better mechanical properties to the IPDI.展开更多
基金This work was supported by the National Natural Science Foundation of China(No.50203008).
文摘A phosphrous-containing poly（aryl ether ketone） was synthesized derived from bisphenol-A and bis[4-（4- fluorobenzoyl）phenyl] phenyl phosphine oxide （FPPPO） by nucleophilic substitution reaction. The structure of the polymer was characterized by FT-IR, ^1H-NMR and ^31p-NMR. The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature （Tg） of the polymer was 205℃, and the 5% weight loss temperature under nitrogen was 475℃. Good solubility of the polymer in organic solvents, such as N-methylpyrrolidone, dimethylformamide, dimethylacetamide, dimethylsulfoxide and chloroalkanes was observed, flexible film was obtained from the polymer＇s CH2Cl2 solution. The limiting oxygen index （LOI） of the PAEK was 40, which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.
基金financially supported by the National Basic Research Program of China (973 Program, Key Project: No. 2014CB643604)
文摘A series of co-polyimide(PI)fibers containing phenylphosphine oxide(PPO)group were synthesized by incorporating the bis(4-aminophenoxy)phenyl phosphine oxide(DAPOPPO)monomer into the PI molecular chain followed by dry-jet wet spinning.The effects of DAPOPPO molar content on the atomic oxygen(AO)resistance of the fibers were investigated systematically.When the AO fluence increased from 0to 3.2×1020the mass loss of the fibers showed the dependence on DAPOPPO molar content in co-PI fibers.The PI fiber containing 40%DAPOPPO showed lower mass loss compared to those containing 0%and 20%DAPOPPO.At higher AO fluence,the higher DAPOPPO content gave rise to dense carpet-like surface of fibers.XPS results indicated that the passivated phosphate layer was deposited on the fiber surface when exposed to AO,which effectively prevented fiber from AO erosion.With the DAPOPPO content increasing from 0%to 40%,the retentions of tensile strength and initial modulus for the fibers exhibited obvious growth from 44%to 68%,and 59%to 70%,after AO exposure with the fluence of 3.2×1020The excellent AO resistance benefits the fibers for application in low Earth orbit as flexible construction components.
文摘Aging of a solid composite propellant containing HTPB/AP/AL was performed in order to validate the conformance of the accelerated aging data to the Arrhenius law. The main objective of the work was to examine the influence of the aziridine bonding agents family on the propellant aging. Aging of the prepared propellant samples was conducted as follows: 1. Four samples, one free of bonding agents, and three containing aziridine based bonding agents MAPO,HX-752, MAT4 were aged at 65°C. 2. Another four samples based on HX-752, MAT4 with different curing agents were aged at 65°C. The measured mechanical properties of the free bonding agent propellant samples were very far from the specifications and this illustrates the importance of the bonding agents in both the preparation and the aging phases.The prepared bonding agent 'MAT4' gave remarkable improvements of the mechanical properties comparing with HX-752 and MAPO. The aziridine bonding agents family inhibited the rate of decomposition of the propellant during the aging periods and supported the propellant matrix against decomposition at the elevate temperatures. Using of HMDI as curing agent gave slight better mechanical properties to the IPDI.
