The study was designated to explore the physiological mechanism of cold tolerance enhanced by phosphate in rice. An experiment was conducted to investigate the effects of different levels of phosphate fertilizer on co...The study was designated to explore the physiological mechanism of cold tolerance enhanced by phosphate in rice. An experiment was conducted to investigate the effects of different levels of phosphate fertilizer on cold tolerance and its related physiological parameters in rice seedings （chilling-sensitive cv. Changbai 9 and chilling-tolerant cv. Jijing 81） under low temperature stress. At the same time, the identification of cold tolerance was conducted. Compared with the normal temperature treatment, the relative chlorophyll content, photosynthesis rate, Fv/Fm and qP decreased and index of unsaturated fatty acid increased in rice under low temperature stress. The effect of chilling-sensitive cultivars was more than that of chilling-tolerant cultivars, more phosphorus fertilizer properly improved seedling quality of rice, slowed relative chlorophyll content dropping degree of rice seeding, increased photosynthesis rate, Fv/Fm, qP and index of unsaturated fatty acids, and enhanced the ability to chilling-tolerant cultivars under low temperature. The effect on chilling-tolerant cultivars was significantly higher than that on chilling sensitive cultivars by applying more phosphorus fertilizer. Phosphate regulated photosynthetic physiology and membrane fluidity to reduce injury by low temperature, and increasd the cold tolerance capacity of rice.展开更多
K-struvite was prepared by precipitation method,and the stability of K-struvite in high temperature and acid-base environment were investigated by X-ray diffraction(XRD),thermogravimetric analysis(TG/DSC),and infrared...K-struvite was prepared by precipitation method,and the stability of K-struvite in high temperature and acid-base environment were investigated by X-ray diffraction(XRD),thermogravimetric analysis(TG/DSC),and infrared spectroscopy(FT-IR).The results show that K-struvite decomposes from 50 to 110℃,and the mass loss begins at 50℃before being completely destroyed at 110℃,then further heating at temperature above 500℃leading to complete loss of the binding water in K-struvite.Moreover,K-struvite is more stable in alkaline environments than acidic environment.展开更多
A new magnesium phosphate bone cement （MPBC） was prepared as a byproduct of boroncontaining magnesium oxide （B-MgO） after extracting Li2CO3 from salt lakes. We analyzed the elementary composition of the B-MgO raw ...A new magnesium phosphate bone cement （MPBC） was prepared as a byproduct of boroncontaining magnesium oxide （B-MgO） after extracting Li2CO3 from salt lakes. We analyzed the elementary composition of the B-MgO raw materials and the effects of calcination temperature on the performance of MPBC. The phase composition and microstructure of the B-MgO raw materials and the hydration products （KMgPO4.6H2O） of MPBC were analyzed by X-ray diffraction and scanning electron microscopy. The results showed that ionic impurities and the levels of toxic elements were sufficiently low in B-MgO raw materials to meet the medical requirements for MgO （Chinese Pharmacopeia, 2O10 Edition） and for hydroxyapatite surgical implants （GB23101.1-2O08）. The temperature of B-MgO calcination had a marked influence on the hydration and hardening of MPBC pastes. Increasing calcination temperature prolonged the time required for the MPBC slurry to set, significantly decreased the hydration temperature, and prolonged the time required to reach the highest hydration temperature. However, the compressive strength of hardened MPBC did not increase with higher calcination temperatures. In the 900-1 000 ~C temperature range, the hardened MPBC had a higher compressive strength. Imaging analysis suggested that the setting time and the highest hydration temperature of MPBC pastes were dependent on the size and crystal morphology of the B-MgO materials. The production and microstructure compactness of KMgPOa＇6H2O, the main hydration product, determined the compressive strength.展开更多
Uniform CeVO4 nanowires with diameter of about 25 nm were synthesized by the water-in-oil microemulsion method at room temperature from cerous chloride, sodium orthophosphate, sodium chloride, cyclohexane, Triton X-10...Uniform CeVO4 nanowires with diameter of about 25 nm were synthesized by the water-in-oil microemulsion method at room temperature from cerous chloride, sodium orthophosphate, sodium chloride, cyclohexane, Triton X-100 and cetyltrimethyl ammonium bromide （CTAB）. The crystal structure and morphology of the nanowires were characterized by XRD and TEM, respectively. The UV-vis absorption was detected by UV-vis spectrophotometer techniques. The results showed that as-prepared nanowires with the hexagonal phase have obvious quantum confinement effect and semiconductor characteristics. Little sodium chloride could play a positive role on the formation of CePO4 nanowires at room temperature. The size of the nanowires can be controlled through the joining of sodium chloride. C 2009 Yi Bin Yin. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
A series of PbBr 2 PbCl 2 P 2O 5 glasses have been prepared and characterized to research the effect of melting temperature on the properties of glasses. The glass forming regions have been explored and the stability ...A series of PbBr 2 PbCl 2 P 2O 5 glasses have been prepared and characterized to research the effect of melting temperature on the properties of glasses. The glass forming regions have been explored and the stability of the glasses against crystallization studied. The density, characteristic temperatures, chemical analysis compositions, and infrared absorption spectra of the glasses were measured. Results show that the PbBr 2 PbCl 2 P 2O 5 ternary system melted at 530～540℃ has a broader glass forming region which extended to the side of PbBr2 than that melted at 450～470℃. The glass transition temperature is more than 200℃ and the density is more than 5 5 g·cm 3 . Both the chemical analysis composition and the infrared absorption spectra of some glasses melted at 530～540℃ show that the decomposition of NH 4H 2PO 4 is more complete than that of glasses melted at 450～470℃.展开更多
基金Supported by the Special Agricultural Project of Agricultural Department (200903003)the Agricultural Modernization Project in the Science and Technology Development Plan of Jilin Province (2009-2010) the High-yield Project of Science and Technology Department (2011BAD16B10)
文摘The study was designated to explore the physiological mechanism of cold tolerance enhanced by phosphate in rice. An experiment was conducted to investigate the effects of different levels of phosphate fertilizer on cold tolerance and its related physiological parameters in rice seedings （chilling-sensitive cv. Changbai 9 and chilling-tolerant cv. Jijing 81） under low temperature stress. At the same time, the identification of cold tolerance was conducted. Compared with the normal temperature treatment, the relative chlorophyll content, photosynthesis rate, Fv/Fm and qP decreased and index of unsaturated fatty acid increased in rice under low temperature stress. The effect of chilling-sensitive cultivars was more than that of chilling-tolerant cultivars, more phosphorus fertilizer properly improved seedling quality of rice, slowed relative chlorophyll content dropping degree of rice seeding, increased photosynthesis rate, Fv/Fm, qP and index of unsaturated fatty acids, and enhanced the ability to chilling-tolerant cultivars under low temperature. The effect on chilling-tolerant cultivars was significantly higher than that on chilling sensitive cultivars by applying more phosphorus fertilizer. Phosphate regulated photosynthetic physiology and membrane fluidity to reduce injury by low temperature, and increasd the cold tolerance capacity of rice.
基金Funded by the National Natural Science Foundation of China(No.51972214)。
文摘K-struvite was prepared by precipitation method,and the stability of K-struvite in high temperature and acid-base environment were investigated by X-ray diffraction(XRD),thermogravimetric analysis(TG/DSC),and infrared spectroscopy(FT-IR).The results show that K-struvite decomposes from 50 to 110℃,and the mass loss begins at 50℃before being completely destroyed at 110℃,then further heating at temperature above 500℃leading to complete loss of the binding water in K-struvite.Moreover,K-struvite is more stable in alkaline environments than acidic environment.
基金Funded by the National Natural Science Foundation of China(No.21276264)the Qinghai Province Science and TechnologyDepartment(No.2013-G-208)
文摘A new magnesium phosphate bone cement （MPBC） was prepared as a byproduct of boroncontaining magnesium oxide （B-MgO） after extracting Li2CO3 from salt lakes. We analyzed the elementary composition of the B-MgO raw materials and the effects of calcination temperature on the performance of MPBC. The phase composition and microstructure of the B-MgO raw materials and the hydration products （KMgPO4.6H2O） of MPBC were analyzed by X-ray diffraction and scanning electron microscopy. The results showed that ionic impurities and the levels of toxic elements were sufficiently low in B-MgO raw materials to meet the medical requirements for MgO （Chinese Pharmacopeia, 2O10 Edition） and for hydroxyapatite surgical implants （GB23101.1-2O08）. The temperature of B-MgO calcination had a marked influence on the hydration and hardening of MPBC pastes. Increasing calcination temperature prolonged the time required for the MPBC slurry to set, significantly decreased the hydration temperature, and prolonged the time required to reach the highest hydration temperature. However, the compressive strength of hardened MPBC did not increase with higher calcination temperatures. In the 900-1 000 ~C temperature range, the hardened MPBC had a higher compressive strength. Imaging analysis suggested that the setting time and the highest hydration temperature of MPBC pastes were dependent on the size and crystal morphology of the B-MgO materials. The production and microstructure compactness of KMgPOa＇6H2O, the main hydration product, determined the compressive strength.
基金support by the Awarding Foundation for Middle and Young-Age Scientist of Shandong Province(2005).
文摘Uniform CeVO4 nanowires with diameter of about 25 nm were synthesized by the water-in-oil microemulsion method at room temperature from cerous chloride, sodium orthophosphate, sodium chloride, cyclohexane, Triton X-100 and cetyltrimethyl ammonium bromide （CTAB）. The crystal structure and morphology of the nanowires were characterized by XRD and TEM, respectively. The UV-vis absorption was detected by UV-vis spectrophotometer techniques. The results showed that as-prepared nanowires with the hexagonal phase have obvious quantum confinement effect and semiconductor characteristics. Little sodium chloride could play a positive role on the formation of CePO4 nanowires at room temperature. The size of the nanowires can be controlled through the joining of sodium chloride. C 2009 Yi Bin Yin. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
文摘A series of PbBr 2 PbCl 2 P 2O 5 glasses have been prepared and characterized to research the effect of melting temperature on the properties of glasses. The glass forming regions have been explored and the stability of the glasses against crystallization studied. The density, characteristic temperatures, chemical analysis compositions, and infrared absorption spectra of the glasses were measured. Results show that the PbBr 2 PbCl 2 P 2O 5 ternary system melted at 530～540℃ has a broader glass forming region which extended to the side of PbBr2 than that melted at 450～470℃. The glass transition temperature is more than 200℃ and the density is more than 5 5 g·cm 3 . Both the chemical analysis composition and the infrared absorption spectra of some glasses melted at 530～540℃ show that the decomposition of NH 4H 2PO 4 is more complete than that of glasses melted at 450～470℃.
