Nitrogen, phosphorus and potassium recycling in an agroforestry ecosystem of Huanghuaihai Plain: with Paulownia elongata intercropped wheat and maize as an example

The studies show that in the whole community, P is deficient, and N and K are basically balanced. N, P and K are accumulated in plant tissues and litters, but depleted in soil. N and P contents in surface soil(0—20 cm) are the main factors affecting crop growth, and P contents in 20 80 cm soil layer is the major affecting Paulownia elongata growth. The absorption coefficients of N, P and K in the communities are 0 078, 0 014 and 0 052 respectively, their utilization coefficients are 0 95, 0 90 and 0 94, and the recycling coefficients are 0 042, 0 05 and 0 063 respectively.

Deciphering the potassium storage phase conversion mechanism of phosphorus by combined solid-state NMR spectroscopy and density functional theory calculations

Phosphorus is the potential anode material for emerging potassium-ion batteries(PIBs)owing to the highest specific capacity and relatively low operation plateau.However,the reversible delivered capacities of phosphorus-based anodes,in reality,are far from the theoretical capacity corresponding to the formation of K3P alloy.And,their underlying potassium storage mechanisms remain poorly understood.To address this issue,for the first time,we perform high-resolution solid-state31P NMR combined with XRD measurements,and density functional theory calculations to yield a systemic quantitative understanding of(de)potassiation reaction mechanism of phosphorus anode.We explicitly reveal a previously unknown asymmetrical nanocrystalline-to-amorphous transition process via rP←→(K_(3)P_(11),K_(3)P_(7),beta-K_(4)P_(6))←→(alpha-K4P6)←→(K_(1-x)P,KP,K_(4-x)P3,K_(1+x)P)←→(amorphous K4P3,amorphous K3P)that are proceed along with the electrochemical potassiation/depotassiation processes.Additionally,the corresponding KP alloys intermediates,such as the amorphous phases of K_(4)P_(3),K_(3)P,and the nonstoichiometric phases of“K_(1-x)P”,“K_(1+x)P”,“K_(4-x)P_(3)”are experimentally detected,which indicating various complicated K-P alloy species are coexisted and evolved with the sluggish electrochemical reaction kinetics,resulting in lower capacity of phosphorus-based anodes.Our findings offer some insights into the specific multi-phase evolution mechanism of alloying anodes that may be generally involved in conversion-type electrode materials for PIBs.

Extraction and Reaction Mechanism of Potassium from Associated Phosphorus and Potassium Ore

Potassium and phosphate were extracted at low temperature by acid hydrolysis process to decompose a new type of associated phosphorus and potassium ore. The main factors affecting the dissolution rate were investigated, such as grinding fineness, the amount of sulfuric acid and fluoride salt, reaction time and temperature, etc. Meanwhile, the effects of various factors on the formation of soluble potassium and phosphate were also discussed. The reaction products and residues were determined by X-ray diffraction（XRD）, scanning electron microscopic（SEM） analysis and other means. The results showed that the dissolution rates of potassium and phosphorus were 70wt% and 93.7wt%, respectively, under the conditions of a grain size of 95.64wt% lessthan 0.074 mm, 9.78 g·g^（-1） sulfuric acid, 0.5 g·g^（-1） ammonium fluoride, 160 ℃ and a reaction time of 2h. The thermodynamic and chemical reaction mechanism was revealed that the primary reaction could be completed spontaneously in a temperature range of 298-433 K. The increase of reaction temperature had an important influence on ion exchange reaction, which was more conducive to the spontaneous process. The research will open up a new way for efficient use of potassium ore resources.

Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation

Oolitic iron ore is one of the most important iron resources. This paper reports the recovery of iron from high phosphorus oolitic iron ore using coal-based reduction and magnetic separation. The influences of reduction temperature, reduction time, C/O mole ratio, and CaO content on the metallization degree and iron recovery were investigated in detail. Experimental results show that reduced products with the metallization degree of 95.82% could be produced under the optimal conditions （i.e., reduction temperature, 1250℃; reduction time, 50 min; C/O mole ratio, 2.0; and CaO content, 10wt%）. The magnetic concentrate containing 89.63wt% Fe with the iron recovery of 96.21% was obtained. According to the mineralogical and morphologic analysis, the iron minerals had been reduced and iron was mainly enriched into the metallic iron phase embedded in the slag matrix in the form of spherical particles. Apatite was also reduced to phosphorus, which partially migrated into the metallic iron phase.

Transgenic approaches for improving use efficiency of nitrogen, phosphorus and potassium in crops

The success of the Green Revolution largely relies on fertilizers, and a new Green Revolution is very much needed to use fertilizers more economically and efficiently, as well as with more environmental responsibility. The use efficiency of nitrogen, phosphorus, and potassium is controlled by complex gene networks that co-ordinate uptake, re-distribution, assimilation, and storage of these nutrients. Great progress has been made in breeding nutrient-efficient crops by molecularly engineering root traits desirable for efficient acquisition of nutrients from soil, transporters for uptake, redistribution and homeostasis of nutrients, and enzymes for efficient assimilation. Regulatory and transcription factors modulating these processes are also valuable in breeding crops with improved nutrient use efficiency and yield performance.

Distribution behavior of phosphorus in the coal-based reduction of high-phosphorus-content oolitic iron ore

This study focuses on the reduction of phosphorus from high-phosphorus-content oolitic iron ore via coal-based reduction. The distribution behavior of phosphorus （i.e., the phosphorus content and the phosphorus distribution ratio in the metal, slag, and gas phases） during reduction was investigated in detail. Experimental results showed that the distribution behavior of phosphorus was strongly influenced by the reduction temperature, the reduction time, and the C/O molar ratio. A higher temperature and a longer reaction time were more favor-able for phosphorus reduction and enrichment in the metal phase. An increase in the C/O ratio improved phosphorus reduction but also hin-dered the mass transfer of the reduced phosphorus when the C/O ratio exceeded 2.0. According to scanning electron microscopy analysis, the iron ore was transformed from an integral structure to metal and slag fractions during the reduction process. Apatite in the ore was reduced to P, and the reduced P was mainly enriched in the metal phase. These results suggest that the proposed method may enable utilization of high-phosphorus-content oolitic iron ore resources.

Impact of Nitrogen, Phosphorus and Potassium on Brown Planthopper and Tolerance of Its Host Rice Plants

The brown planthopper(BPH),Nilaparvata lugens(St?l),appeared as a devastating pest of rice in Asia. Experiments were conducted to study the effects of three nutrients,nitrogen(N),phosphorus(P) and potassium(K),on BPH and its host rice plants. Biochemical constituents of BPH and rice plants with varying nutrient levels at different growth stages,and changes in relative water content(RWC) of rice plants were determined in the laboratory. Feeding of BPH and the tolerance of rice plants to BPH with different nutrient levels were determined in the nethouse. Concentrations of N and P were found much higher in the BPH body than in its host rice plants,and this elemental mismatch is an inherent constraint on meeting nutritional requirements of BPH. Nitrogen was found as a more limiting element for BPH than other nutrients in rice plants. Application of N fertilizers to the rice plants increased the N concentrations both in rice plants and BPH while application of P and K fertilizers increased their concentrations in plant tissues only but not in BPH. Nitrogen application also increased the level of soluble proteins and decreased silicon content in rice plants,which resulted in increased feeding of BPH with sharp reduction of RWC in rice plants ultimately caused susceptible to the pest. P fertilization increased the concentration of P in rice plant tissues but not changed N,K,Si,free sugar and soluble protein contents,which indicated little importance of P to the feeding of BPH and tolerance of plant against BPH. K fertilization increased K content but reduced N,Si,free sugar and soluble protein contents in the plant tissues which resulted in the minimum reduction of RWC in rice plants after BPH feeding,thereby contributed to higher tolerance of rice plants to brown planthopper.

Migration behaviors and kinetics of phosphorus during coal-based reduction of high-phosphorus oolitic iron ore

To understand the migration mechanisms of phosphorus(P)during coal-based reduction,a high-phosphorus oolitic iron ore was reduced by coal under various experimental conditions.The migration characteristics and kinetics of P were investigated by a field-emission electron probe microanalyzer(FE-EPMA)and using the basic principle of solid phase mass transfer,respectively.Experimental results showed that the P transferred from the slag to the metallic phase during reduction,and the migration process could be divided into three stages:phosphorus diffusing from the slag to the metallic interface,the formation of Fe P compounds at the slag metal interface and P diffusing from the slag metal interface to the metallic interior.The reduction time and temperature significantly influenced the phosphorus content of the metallic and slag phases.The P content of the metallic phase increased with increasing reduction time and temperature,while that of the slag phase gradually decreased.The P diffusion constant and activation energy were determined and a migration kinetics model of P in coal-based reduction was proposed.P diffusion in the metallic phase was the controlling step of the P migration.

Microwave Assisted Liberation of High Phosphorus Oolitic Iron Ore

The influence of microwave treatment on the liberation of iron ore from the high phosphorus oolitic iron ore from Aswan region, Egypt was studied. The effect of microwave power, exposure time and grain size on the liberation of iron ore was investigated. The microfractures and cracks of the samples were characterized before and after microwave treatments. The heating rate of high phosphorus oolitic iron ore was studied. Crystallinity of hematite was characterized before and after microwave pretreatment. The results indicated that intergranular fractures formed between the gangues (fluorapatite and chamosite) and hematite after microwave treatment, leading to improved liberation of iron ore and a significant reduction in comminution energy. Percentages of fraction ≤ -0.125 mm increased from 46.6% to 59.76% with increased exposure time from 0 to 60 seconds. The heating rate of iron ore showed that microwave treatment was less efficient at smaller particle sizes for a fixed applied power density. Crystallinity of hematite increased with the microwave exposure time.

Geochemical and Behavioral Modeling of Phosphorus and Sulfur as Deleterious Elements of Iron Ore to Be Used in Geometallurgical Studies, Sheytoor Iron Ore, Iran

Sheytoor Iron Ore deposit is located in Yazd province of Iran (Bafq). The most abundant ore is magnetite, which can be seen in the form of mass and granular tissue in various forms of self-shaped, semi-self-shaped and amorphous. The main purpose of this study is to identify the geochemical relationship of phosphorus and sulfur elements and also three-dimensional modeling of mineralization of these elements in iron ore. In order to achieve the research goal, methods such as k-mean clustering technique, concentration-volume fractal as well as block modeling with kriging estimator and Inverse Distance Weighting (IDW) interpolator were used. The model of geochemical behavior of phosphorus and sulfur elements compared to iron is of great importance because these two elements are known as deleterious elements in mineral processing and steelmaking processes, which are the post-mining stages. Existence of geochemical model and identification of elements’ behavior towards each other play a key role in optimizing mining operations in order to achieve geometallurgical goals. The results of this study are the three-dimensional model of mineralization of iron, phosphorus and sulfur elements, separation of phosphorus and sulfur mineralization communities and also presenting the model of enrichment community of these two elements. All the results are in line with geometallurgical studies and can optimize the next steps by optimizing the mining process.

Calcination-Digestion-Desliming of Phosphorus Ore Bearing Rare Earth

The recoveries of phosphorus and RE of ore from Zhijin in Guizhou were studied.The influences of the calcination temperature, resident time, the digested time and water volume of the calcinating on concentrate yield by desliming were also investigated by orthogonal design.Appropriate calcination temperature is initial condition that makes carbonate mineral decomposition.The recovery of phosphorus is 83.02% and rare earth is 90.56% in phosphorus concentrate when calcined temperature is 900 ℃, other conditions include: calcined time is 30 min, digestion water volume is 300 ml, digestion time is 20 min.The results show that the pre-treatment of the ore is favorable for the separation and enrichment of rare earth from phosphorus ore, and a process of calcination-digestion-desliming was promised.

Effects of Tillage Methods on Soil Available Phosphorus and Available Potassium in the Loess Plateau

In order to find out the effects of long-term no-tillage operation on soil available phosphorus and available potassium in the loess plateau, a suitable high-yield and high-efficiency tillage technology system was established. In the Changwu loess plateau agri-ecological experiment station of the Northwest A&F University of Changwu County, Shaanxi Province, the no-tillage experimental field for three consecutive years was selected. In September 2015, no-tillage, tillage, and rotary tillage were carried out before winter wheat was sowed. After the harvest of winter wheat in 2016, the contents of available phosphorus and available potassium in 0-30 cm soil layer under three tillage methods were analyzed. The results showed that in the 0-30 cm soil layer, the soil available phosphorus and available potassium decreased with the increase of the soil depth in the three tillage methods. The content of available phosphorus and available potassium in 10-20 cm soil layer and 20-30 cm soil layer decreased by 16.07%, 32.74%, 15.54% and 27.08%, respectively, and there were significant differences ( P <0.05). Under different tillage methods, the soil available phosphorus content in the 0-10 cm soil layer significantly reduced by 11.31% compared with no-tillage. The soil available potassium content under tillage and rotary tillage significantly reduced by 6.16% and 4.97%, respectively ( P <0.05). Compared with no-tillage, the soil available phosphorus content in the 20-30 cm soil layer significantly reduced by 18.12%. The soil available potassium content under tillage and rotary tillage methods significantly reduced by 17.17% and 9.22%, respectively ( P <0.05). Therefore, in the long-term no-tillage dry loess plateau, it is necessary to conduct proper tillage or rotary tillage.

Reduction Characteristics of High Phosphorus Iron Ore in Reducing Parameters Similar to Blast Furnace Conditions

The strong global demand for iron and steel has necessitated the utilization of various low grade iron ores, which are not suitable for direct utilization in ironmaking processes. The low grade iron ores cannot be dressed effectively using the traditional mineral processing methods because of complicated min-eral compositions. The main problem associated with exploiting these deposits is the dissemination of fine silicate minerals and the high level of phosphorus content due to the poor liberation of iron minerals from the gangues. The pre-sent manuscript is aimed to investigate reduction properties of iron ores rich in phosphorous in order to study the suitability of using these ores in iron blast furnace. Representative technological samples of iron ore are collected from Eastern South Aswan iron ore mine in Egypt. The principal gangue contents are SiO2 7.76%, and P2O5 1.13%. Iron and phosphorus exist in the form of hematite 78% and apatite respectively. The ore was fired at 1000&deg;C for 3 hours. The green and fired samples were isothermally reduced at conditions which closely represent the theoretical reduction conditions in different zones of blast furnace. The influence of reduction conditions on the reduction behaviour and the morphology of the reduced samples were investigated. After reduction apatite is changed to Calcium phosphate beside fayalite and quartz. The reduction rate of fired samples is greater than that for the green ones and that was confirmed by morphological examination. At cohesive zone condition, the effect of firing on reduction characteristics cannot be distinguished.

Effects of Nitrogen-phosphorus-potassium Combined Fertilization on Rice Yield and Fertilizer Use Efficiency in Jianghan Plain

[Objectives]This study was conducted to explore the rational formula for rice fertilization in Jianghan Plain.[Methods]An experiment on the combined application of nitrogen,phosphorus and potassium fertilizers was carried out in Jianghan Plain,an important rice producing area in Hubei,with a total of five treatments to study the effects of nitrogen,phosphorus and potassium fertilizers on the fertilizer use efficiency and yield of rice.[Results]Fertilization had a significant effect on improving rice yield,and nitrogen fertilizer had the greatest effect on rice yield,followed by potassium fertilizer and phosphorous fertilizer.[Conclusions]This study provides a scientific basis for the application of rice fertilizers and the reduction and efficiency improvement of chemical fertilizers in Jianghan Plain.

Upgrading and dephosphorization of Western Australian iron ore using reduction roasting by adding sodium carbonate

The technology of direct reduction by adding sodium carbonate （Na2CO3） and magnetic separation was developed to treat Western Australian high phosphorus iron ore. The iron ore and reduced product were investigated by optical microscopy and scanning electron microscopy. It is found that phosphorus exists within limonite in the form of solid solution, which cannot be removed through traditional ways. During reduction roasting, Na2CO3 reacts with gangue minerals （SiO2 and A1203）, forming aluminum silicate-containing phosphorus and damaging the ore structure, which promotes the separation between iron and phosphorus during magnetic separation. Meanwhile, Na2CO3 also improves the growth of iron grains, increasing the iron grade and iron recovery. The iron concentrate, assaying 94.12wt% Fe and 0.07wt% P at the iron recovery of 96.83% and the dephosphorization rate of 74.08%, is obtained under the optimum conditions. The final product （metal iron powder） after briquetting can be used as the burden for steelmaking by an alactrie a.re furnace to rer）la,ce scrar） steel.

Investigation of phytosociological parameters and physicochemical properties of soil in tropical semi-evergreen forests of Eastern Himalaya

The study of floral diversity in forest and its development are incomplete without taking consideration of plant-soil interactions. So with this view in mind, the present study was conducted in tropical semi-evergreen forests of the Mokukchung district, Nagaland, in eastern Himalaya. The aim of the study was to investigate the phytosociological parameters Seven sites were randomly in relation to soil properties. selected to study the soil properties at up to one meter in depth and a phytosociological study was carried out in nearby areas via the quadrate method. In the studied sites, the richness of tree species varied from 4 to 15 ha^-1, with Gmelina arborea and Duabanga grandifloras being the common species. The highest total basal area was recorded in 10 mile village （47,998.16 cm^2 ha^-1） followed by Minkong village site （32,704.66 cm^2 ha^-1）. Soil physical and chemical properties-i.e, bulk density （BD）, soil pH, organic carbon （OC）, available nitrogen （N）, available phosphorus （P）, and available potassium （K） were analyzed using standard procedures. Significant differences were observed in the soil properties. The basal area of species showed significant positive correlation in terms of available K （0.754） and OM （0.302） content in soil, and the Shannon-Wiener diversity index （H） is also positively correlated with the available N content （0.402）. The undisturbed nature of the sites played an important role in maintaining the soil fertility and floral diversity of the sites. Moreover, sites with maximum productivity and soil fertility are considered as potential carbon sequestration areas in the region while sites with the low soil fertility need restoration.

Effects of recovery time after fire and fire severity on stand structure and soil of larch forest in the Kanas National Nature Reserve, Northwest China

Forest recovery may be influenced by several factors, of which fire is the most critical.However, moderate-and long-term effects of fire on forest recovery are less researched in Northwest China.Thus, the effects of different forest recovery time after fire(1917(served as the control), 1974, 1983 and 1995) and fire severities(low, moderate and high) on larch(Larix sibirica Ledeb.) forest were investigated in the Kanas National Nature Reserve(KNNR), Northwest China in 2017.This paper analyzed post-fire changes in stand density, total basal area(TBA), litter mass, soil organic carbon(SOC) and soil nutrients(total nitrogen, total phosphorus and total potassium) with one-way analyses of variance.Results indicate that litter mass, TBA, SOC and soil nutrients increased with increasing recovery time after fire and decreasing fire severity, while the stand density showed an opposite response.The effects of fire disturbance on SOC and soil nutrients decreased with increasing soil depth.Moreover, we found that the time of more than 43 a is needed to recover the litter mass, TBA, SOC and soil nutrients to the pre-fire level.In conclusion, high-severity fire caused the greatest variations in stand structure and soil of larch forest, and low-severity fire was more advantageous for post-fire forest stand structure and soil recovery in the KNNR.Therefore, low-severity fire can be an efficient management mean through reducing the accumulation of forest floor fuel of post-fire forests in the KNNR, Northwest China.

Continuous flow analysis of dissolved total phosphorus in seawater by UVK_(2)S_(2)O_(8) online digestion method

Several methods for analysis of dissolved total phosphorus in seawater were reviewed. Discussions were focused on UVirradiation and persulphate oxidation methods which are the most popular dissolved organic phosphorus determinationmethods presently. The compounds used for the phosphorus recovery test were categorized into three groups accordingto their chemical structure. It was found that low power UV irradiation can decompose POC or PC bonds efficientlybut may be inefficient for POP bonds. Heating-bath in acid condition is useful for decomposing POP bonds. Usingthe continuous flow analysis system (Auto-analyzer II), UV digestion and heating-bath, series experiments were carriedout based on the above analysis. Eleven model compounds were employed for the phosphorus recovery test and thefactors influencing the decomposition efficiency of dissolved compounds containing phosphorus were clarified. Finally,the optimal design for determination of dissolved total phosphorus in seawater based on the routine continuous flowanalysis system was presented. For the organic mono-phosphate, the recovery is more than 90% and a recovery of33%~51% was obtained for inorganic or organic polyphosphates. Up to now, this is the highest decompositionefficiency for dissolved phosphorus based on the continuous flow analysis system.

Model for Quantitative Evaluation and Prediction of the Concentration of Phosphorus Removed during Pyro-Hydro Beneficiation of Haematite

This paper presents a model derived for quantitative evaluation and prediction of the concentration of phosphorus removed during pyro-hydro beneficiation of iron oxide ore. Potassium hydroxide was used as the leaching solution and the reaction vessel containing the solution and ore was heated at a temperature of 600℃ for 10 minutes. The results of the investigation indicates that the model;P = (e0.7827) S predicts the concentration of phosphorus removed, based on the concentration of sulphur simultaneously removed. It was observed that the validity of the model is rooted in the expression lnP = lnN + lnS where both sides of the expression are approximately equal to 4. The maximum deviation of the model-predicted concentration of removed phosphorus from the corresponding concentration obtained from the experiment was less than 3%. The concentrations of phosphorus removed per unit mass-input of iron oxide ore as obtained from experiment and derived model are 0.8917 and 1.0354 mg/kg g-1 respectively. Similarly, the concentrations of phosphorus removed per unit concentration of removed sulphur as obtained from experiment and derived model are 1.8838 and 2.1874 mg/kg (mg/kg)-1 respectively. This implies that the concentration of phosphorus removed is approximately equal to the concentration of simultaneously removed sulphur during the beneficiation process.

Macronutrients Uptake in Soybean as Affected by <i>Bradyrhizobium japonicum</i>Inoculation and Phosphorus (P) Supplements

Field and glasshouse experiments were conducted to study the effect of B. japonicum inoculation and phosphorus supplementation on macronutrient uptake by soybean. The treatments consisted of B. japonicum inoculation (with & without), phosphorus supplementation at the levels of 0, 20, 40 and 80 kg P·ha-1. Both treatments were replicated four times in a split plot design. The macronutrients considered were N, P, K, Ca and Mg. Results showed that inoculation with B. japonicum significantly contribute to the uptake of N, P, K, Ca and Mg in roots, shoots, pods and the whole soybean plant. Likewise, phosphorus supplementation significantly enhanced the uptake of N, P, K, Ca and Mg in roots, shoots, pods and the whole plant. The use of effective strains of rhizobia and P supplementation was an effective way of enhancing the growth of soybean, eventually the uptake of macronutrients in plant organs.