Phosphotungstic acid immobilized on amino-functionalized TS-1 zeolite as a solid acid catalyst for the synthesis of tributyl citrate

The amino-functionalization of TS-1 zeolite followed by immobilization of phosphotungstic acid(HPW)was presented to prepare a strong solid acid catalyst for the synthesis of bio-based tributyl citrate from the esterification of citric acid and n-butanol.γ-Aminopropyltriethoxysilane(APTES)was first grafted on the TS-1 zeolite via the condensation reactions with surface hydroxyl groups,and subsequently the HPW was immobilized via the reaction between the amino groups and the protons from HPW-forming strong ionic bonding.The Keggin structure of HPW and MFI topology of TS-1 zeolite were well maintained after the modifications.The amino-functionalization generated abundant uniformly distributed active sites on TS-1 for HPW immobilization,which promoted the dispersity,abundance,as well as the stability of the acid sites.The tetrahedrally coordinated framework titanium and non-framework titania behaved as weak Lewis acid sites,and the protons from the immobilized HPW acted as the moderate or strong Brønsted acid sites.An optimized TBC yield of 96.2%(mol)with a conversion of-COOH of 98.1%(mol)was achieved at 150℃for 6 h over the HPW immobilized on amino-functionalized TS-1.The catalyst exhibited good stability after four consecutive reaction runs,where the activity leveled off at still a relatively high level after somewhat deactivation possibly caused by the leaching of a small portion of weakly anchored APTES or HPW.

One-pot synthesis of a hierarchical microporous-mesoporous phosphotungstic acid-HKUST-1 catalyst and its application in the selective oxidation of cyclopentene to glutaraldehyde

A hierarchical microporous-mesoporous metal-organic framework of HKUST-l（Cu）-encapsulated phosphotungstic acid （HPW） material, referred to as HPWs@Meso-HKUST-1, is prepared by a one-pot synthesis method using cetyltrimethylammonium bromide as the supramolecular template. The addition of HPWs to the synthesis mixture of hierarchical porous HKUST-1 results in the direct encapsulation of HPWs inside the mesopores of the HKUST-1 structure, with a homogeneous distribution over the HKUST-1 crystals, which is confirmed by XRD, FT-IR, N2 adsorption, UV-Vis DRS, and TEM. FT-IR-CO adsorption experiments indicated that additional Lewis acid sites were present in the HPWs@Meso-HKUST-1 sample. The novel heterogeneous catalyst demonstrates excellent catalytic performance for the selective oxidation of cyclopentene （CPE） to glutaraldehyde CGA） using tert-butyl hydroperoxide and acetonitrile （MeCN） as the oxidant and solvent, respectively. The high activity of the catalyst is attributed to the mesostructure of the catalyst and the nature and appropriate abundance of the HPWs--being highly dispersed with the addition of Lewis sites. After a reaction for 36 h, the 30% wt% HPWs@Meso-HKUST-1 catalyst exhibits a CPE conversion of 92.5% and a high GA yield of 73%. Furthermore, the HPWs@Meso-HKUST-1 material is sufficiently stable to prevent the leaching of HPWs, and behaves as a true heterogeneous catalyst that can be repeatedly recycled without sustaining a loss of activity and selectivity in the selective oxidation of CPE.

A Hybrid Membrane of Poly(vinyl alcohol) and Phosphotungstic Acid for Fuel Cells

Proton conducting membranes composed of phosphotungstic acid (PWA) and poly(vinyl alcohol) (PVA)were prepared. Conductivity and Fourier transform infrared spectrometer(FTIR) measurements show that most ofthe acid embedded are stable in the PVA matrix when the membrane is immerged in water or methanol solution atroom temperature. Conductivity of the composite membranes scatters around 10-3 S.cm-1 at room temperature.The methanol crossover through the membranes is about an order of magnitude lower than that through Nafion117 membrane.

Insight into the oxidative desulfurization of high-sulfur petroleum coke under mild conditions:a journey of vanadium-substituted Dawson-type phosphotungstic acid

High-sulfur petroleum coke(HSPC),that is a by-product from slag oil in the coking process of refning,shows versatility values in practical applications and,however,concentrates the majority of organic sulfur.Herein,we design and construct a highly efective CTAB@HPA composites to be explored for the catalytic oxidative desulfurization of HSPC under mild conditions using hydrogen peroxide as the oxidant and 1-butyl-3-methylimidazole tetrafuoroborate ionic liquid as the extractant.The results demonstrate that the sulfur content of HSPC could be strikingly reduced from 4.46 wt%to 2.48 wt%under 60℃ and atmospheric pressure,and that the organic sulfur in HSPC is mainly oxidized to sulfoxide,sulfone and sulfate,which latter can be directly separated from petroleum coke.Moreover,the efect of reaction conditions on the desulfurization performance of HSPC as well as the catalytic oxidation reaction kinetic of HSPC desulfurization was systematically investigated.Furthermore,a mechanism for the oxidative desulfurization of HSPC over CTAB@HPA catalysts was proposed.Therefore,this work provides new insight into how to construct active catalysts for the desulfurization of HSPC under mild conditions.

Synergistic Effect between Zr-MOF and Phosphotungstic Acid for Oxidative Desulfurization

PTA/UiO-66 composites were successfully synthesized by the hydrothermal method.The results showed that the synergistic effect between phosphotungstic acid(PTA)and UiO-66 could enhance the oxidative desulfurization(ODS)activity.The XRD results proved that UiO-66 retained its structure in the PTA/UiO-66 composites.The SEM results showed that the PTA/UiO-66 catalysts exhibited regular octahedral shape.The Raman spectra revealed that PTA in the composites retained the Keggin structure.The XPS results showed that the electron transfer occurred from Zr-MOF to PTA.The ODS reaction mechanism was discussed.Electrons transfer from Zr-MOF to PTA can promote the generation of active species(·OH)and thus enhance the ODS activity.This explanation can be confirmed by the formation of oxygen vacancy and W0 as revealed by the XPS analysis.

An Efficient Extraction-Free Method for Oxidative Desulfurization of Model Fuels Employing Cross-Linked Polyionic Liquid Phosphotungstate Catalysts

An efficient extraction-free oxidative desulfurization(ODS)process using a series of cross-linked polyionic liquid phosphotungstate(CLPIL-PW)catalysts is reported.The cross-linked PILs were prepared with DVB and 1-n-alkyl-3-vinyl imidazole hydrobromide(alkyl=ethyl,butyl,octyl,dodecyl),and were then assembled with phosphotungstic acid(H_(3)PW_(12)O_(40))to form the catalysts.The CLPIL-PWs have been applied to the oxidative removal of dibenzothiophene(DBT)from model oil with H_(2)O_(2) as an oxidant.The effects of ionic liquid(IL)cationic species,varying the DVB/IL molar ratio in the polymerization process,and varying operating conditions were investigated.The CLPIL-PWs were characterized by inductively coupled plasma(ICP)mass spectrometry,elemental analysis,scanning electron microscopy(SEM),Fourier transform infra-red(FTIR)spectroscopy,X-ray diffraction(XRD),^(13)C and^(31)P nuclear magnetic resonance(NMR)spectroscopy.The polydivinylbenzene-co-1-n-octyl-3-vinyl imidazole phosphotungstate(P(DVB-OVIm)PW)exhibited the highest DBT removal efficiency(99.9%)and remarkable recyclability,and could be reused eight times without reducing its activity.Finally,an extraction-free ODS mechanism is proposed.

Three-dimensionally Ordered Macroporous Phosphotungstic Acid/SiO2 for Efficient Catalytic Oxidative Desulfurization

Three-dimensionally ordered（3DOM） macroporous phosphotungstic acid/SiO_2（HPW/SiO_2） materials were prepared by using colloidal crystal as templates and applied for oxidative desulfurization（ODS） of the model fuel oil. The obtained HPW/SiO_2 materials were characterized through scanning electron microscopy, powder X-ray diffraction, N_2 sorption, and Fourier transform infrared spectroscopy. The results indicated that 3 DOM HPW/SiO_2 possessed hierarchical pore architectures which contained ordered macropores and disordered mesopores, with the Keggin type HPW embedded in the framework of pore structure. The removal rate of dibenzothiophene（DBT） could reach 100% under the optimum conditions, moreover. The performance was only slightly decreased for the regenerated catalyst after 7 cycles.

Synthesis,Characterization and Catalytic Application of H_3PW_(12)O_(40)/MCM-48 in the Esterification of Methacrylic Acid with n-butyl Alcohol

A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H3PW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H3PW12O40/MCM-48 is an excellent catalyst for synthesizing n-butyl methacrylate and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）：n（n-butyl alcohol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.6, mass ratio of catalyst used to the reactants is 0.5% and reaction time is 2.0 h. Under these conditions, the yield of n-butyl methacrylate can reach 93.7%.

Facile synthesis of efficient pentaethylenehexamine-phosphotungstic acid heterogeneous catalysts for oxidative desulfurization

The ultra-deep desulfurization of oil needs to be solved urgently due to various problems,including environmental pollution and environmental protection requirements.Oxidative desulfurization(ODS)was considered to be the most promising technology.The facile synthesis of highly efficient and stable HPW-based heterogeneous catalysts for oxidative desulfurization is still a challenging task.In this paper,pentamethylene hexamine(PEHA)and phosphotungstic acid(HPW)were combined by a simple one-step method to prepare a heterogeneous catalyst of PEHA-HPW for the production of ultra-deep desulfurization fuel oil.The composite material exhibited excellent catalytic activity and high recyclability,which could reach a 100% dibenzothiophene(DBT)removal rate in 30 min and be recycled at least 5 times.Experiments and DFT simulations were used to better examine the ODS mechanism of PEHA-HPW.It was proved that the rich amino groups on the surface of PEHA-HPW play a crucial role.This work provides a simple and feasible way for the manufacture of efficient HPW-based catalysts.

Encapsulation of ionic liquid, phosphotungstic acid inside the nanocages of MIL-101(Cr): Effective and reusable catalyst for efficient solvent-free oxidative desulfurization from fuel oil

Oxidative desulfurization from fuel oil is one of the important methods for deep desulfurization.The development of efficient oxidative desulfurization catalysts is crucial for improving the desulfurization performance.Successful encapsulation of phosphotungstic acid(HPW)and ionic liquid(BMImBr)inside the mesoporous cages of MIL-101(Cr)was accomplished through a combination of“bottle around ship”and“ship in bottle”methods.The obtained BMImPW@MIL-101(Cr)composite was characterized by XRD,FTIR,BET,SEM,XPS and ICP methods.Results indicated that the BMImPW@MIL-101(Cr)composites with PW^(3−) loading of 23.1–50.7 wt%were obtained,demonstrating that the“bottle around ship”method is beneficial to make full use of nanocages of MIL-101(Cr)to obtain expected high loading of active PW^(3−) .The BMImPW@MIL-101(Cr)exhibits excellent reusability with no evidence of leaching of active PW^(3−) and BMIm^(+),and well-preserved structure after successive cycles of regeneration and reuse.The significantly improved stability of BMImPW@MIL-101(Cr)as compared to HPW@MIL-101(Cr)is possibly because the leaching of the active PW^(3−) −sites can be greatly suppressed by forming large size of BMImPW owing to introduction of BMIm^(+)cation.The BMImPW@MIL-101(Cr)exhibited excellent catalytic activity for solvent free oxidative desulfurization of refractory sulfides.The enhanced oxidative desulfurization activity as compared to HPW@MIL-101(Cr)can be explained by the intimate contact of sulfides with active PW^(3−) sites owing the strong attraction of BMIm^(+)cation with the sulfides.

Study on the epoxidation of olefins with H_(2)O_(2)catalyzed by biquaternary ammonium phosphotungstic acid

Selective epoxidation of olefins is an important field in chemical industry.In this work,we developed a new phosphotungstic acid catalyst{[(C_8H_(17))(CH_(3))_(2)N]_(2)(CH_(2))_(3)}_(1.5){PO_(4)[WO(O_(2))_(2)]_(4)}with long carbon chain and biquaternary ammonium cation.Cyclohexene could be epoxidized to cyclohexene oxide in 96.3%conversion and 98.2%selectivity.The catalyst type,solvent type,catalyst loading,initial molar ratio,temperature,cycle performance and substrate extensibility were studied and optimized,the kinetic parameters about overall reaction and unit reaction were also calculated.Dynamic light scattering analysis was carried out to explain the different catalytic performance between catalysts with different carbon chain length.This novel catalyst and the corresponding dynamics and mechanism study could probably help the industrial application on the epoxidation of cyclohexene with H_(2)O_(2).

A Direct Liquid Fuel Cell with High Power Density Using Reduced Phosphotungstic Acid as Redox Fuel

Direct liquid fuel cells(DLFCs)are proposed to address the problems of high cost and complex storage and transportation of hydrogen in traditional hydrogen-oxygen proton exchange membrane fuel cells.However,present fuels of organic small molecules used in DLFCs are restricted to problems of sluggish electrochemical kinetics and easily poisoning of precious metal catalysts.Herein,we demonstrate reduced phosphotungstic acid as a liquid fuel for DLFCs based on its advantages of high chemical and electrochemical stability,high electrochemical activity on common carbon material electrodes,and low permeability through proton exchange membranes.The application of phosphotungstic acid fuel effectively solves the problems of high cost of anode catalysts and serious fuel permeation loss in traditional DLFCs.A phosphotungstic acid fuel cell achieves a peak power density of466 mW cm^(-2)at a cell voltage of 0.42 V and good stability at current densities in the range from 20 to 200 mA cm^(-2).

Investigation of Propene Oligomerization Catalyzed by Phosphotungstic Acid Catalysts

In this paper, the propene oligomerization reaction catalyzed by phosphotungstic acid supported on two kinds of silica gel was studied, it had been found out that the conversion of propene catalyzed by the type A silica gel-phosphotung- stic acid catalyst was 3.38 m%, while the conversion of propene catalyzed by the type B silica gel-phosphotungstic acid catalyst was 90.1 m% with a nonene selectivity of 42.33 m%, and a dodecene selectivity of 31.79 m%. The influence of reaction temperature, pressure and liquid hourly space velocity （LHSV） on the reaction catalyzed by the type B silica gel- phosphotungstic acid catalyst was investigated. It had been verified that when the reaction temperature increased from 170 ~C to 190 ~C, the conversion of propene increased while the selectivity of nonene and dodecene decreased; when the re- action pressure increased from 3.5 MPa to 4.5 MPa, the conversion of propene increased also, and the selectivity of nonene and dodecene changed very little. The conversion of propene at a space velocity of between 0.5 h-1 and 1.0 h-~ was higher than that achieved at 2.0 h-~, but the selectivity of nonene and dodecene did not show regular fluctuations. An optimum conversion of propene （91.05 m%） and an optimum selectivity of nonene and dodecene （89.51 m%） could be achieved at a reaction temperature of 170 ~C, a reaction pressure of 4.5MPa, and a LHSV of 1.0 fit. The experiments on catalyst life showed that the activity of the type B silica gel-phosphotungstic acid catalyst could be only maintained in 25 hours, and the reason was explained also.

Phosphotungstic Acid Catalyzed Conjugate Addition of Indoles with α,β-Enones

A new facile, efficient and very mild entry to the synthesis of 3-（1H-indol-3-yl）-1, 3-diarylpropan-l-ones is presented. The procedure utilizes phosphotungstic acid （5 mol%） as a catalyst for the Michael addition of indole to α,β-unsaturated ketones in good yield in acetonitrile as solvent.

Catalytic synthesis of acetals and ketals with H3PW12O40/PAn

A new environmental friendly catalyst H3PW12O40/PAn was prepared and identified by means of FT-IR,XRD,and TG/DTA.The optimum conditions have been found;that is,the mass ratio of PAn to H3PW12O40 is 1：1.5,the volume of methanol is 20 mL,and the reflux reaction time is 3 h.The structural identity of Keggin units is preserved after the incorporation into polyaniline matrix.Catalytic activities of H3PW12O40/PAn in synthesizing 2-methyl-2-ethoxycarbonylmethyl-1,3-dioxolane,2,4-dimethyl-2-ethoxycarbonylmethyl-1,3-dioxolane,cyclohexanone ethylene ketal,cyclohexanone 1,2-propanediol ketal,butanone ethylene ketal,butanone 1,2-propanediol ketal,2-phenyl-1,3-dioxolane,4-methyl-2-phenyl-1,3-dioxolane,2-propyl-1,3-dioxolane,and 4-methyl-2-propyl-1,3-dioxolane were reported.It has been demon-strated that H3PW12O40/PAn is an excellent catalyst.Various factors concerned in these reactions were investigated.The optimum conditions are as follows：the molar ratio of aldehyde/ketone to glycol（r） is 1：1.5,the mass ratio of the catalyst used to the reactants is 0.6%,and the reaction time is 1.0 h.Under these conditions,the yield is as follows：2-methyl-2-ethoxycarbonylmethyl-1,3-dioxolane,69.0%;2,4-dimethyl-2-ethoxycarbonylmethyl-1,3-dioxolane,79.5%;cyclohexanone ethylene ketal,78.9%;cyclohexanone 1,2-propanediol ketal,85.3%;butanone ethylene ketal,56.9%;butanone 1,2-propanediol ketal,78.1%;2-phenyl-1,3-dioxolane,76.3%;4-methyl-2-phenyl-1,3-dioxolane,94.2%;2-propyl-1,3-dioxolane,70.7%;and 4-methyl-2-propyl-1,3-dioxolane,79.2%.

Synthesis of Bimodal Mesoporous TiO_(2)-PTA/BMMS and Its Enhanced Performance in the Photocatalytic Oxidative Desulfurization

With the bimodal mesoporous silica(BMMS)acting as the support and the composite of TiO2 with phosphotungstic acid(PTA)functioning as the active constituent,TiO_(2)-PTA/BMMS was synthesized by the two-step impregnation route.This catalyst was applied in the photocatalytic oxidative desulfurization(PODS)process,with dibenzothiophene serving as the model sulfur compound.PODS proceeds in one pot,in which H_(2)O_(2) acts as the oxidant and methanol plays the role of the solvent.TiO_(2)-PTA/BMMS was characterized by XRD,N_(2) adsorption and desorption,XRF,FTIR,UV-vis,SEM,EDS and TEM techniques.It showed that the introduction of PTA contributes higher order,higher surface area and pore volume to the bimodal mesoporous support.With TiO_(2)-PTA/BMMS used as the catalyst under the UV irradiation,the desulfurization rate can reach 99.6%.This result is obviously higher than that achieved by TiO_(2)/BMMS.The catalyst also has no significant drop in catalytic activity after eight runs of reusing.In such catalytic system,the synergistic effects of this photocatalytic oxidation and the extraction with the methanol serving as the solvent played an indispensable role.

[Hmim]_3PW_(12)O_(40):A high-efficient and green catalyst for the acetalization of carbonyl compounds

[Hmim]_3PW_(12)O_(40) was developed and used in the acetalization of carbonyl compounds in excellent yields.The ionic liquidheteropoly acid hybrid compound and reaction medium formed temperature-dependent phase-separation system with the ease of product as well as catalyst separation.The catalyst was recycled more than 10 times without any apparent loss of catalytic activity.

A multi-functional Ru Mo bimetallic catalyst for ultra-efficient C3 alcohols production from liquid phase hydrogenolysis of glycerol

Ru and Mo bimetallic catalysts supported on active carbon modified by phosphotungstic acid(PW)were designed and applied in glycerol hydrogenolysis reaction.The physicochemical properties of the catalysts were characterized and the presence of active sites was investigated from the perspective of the glycerol hydrogenolysis performance.The MoOxis highly selective for the C—O bond cleavage of glycerol molecules,which can reasonably regulate the strong C—C bond cleavage activity of Ru nanoparticles.By using sequential deposition of Ru and Mo supported on mesoporous PW-C,the characterization results show that the combination of isolated low-valence MoOxwith metal Ru particles can form“MoOx-Ru-PW”,which provides highly catalytic activity toward C—O bond cleavage,selectively producing more C3 alcohols(mainly 1,2(3)-propanediol).The glycerol conversion of 1%Mo/Ru/PW-C catalyst was 59.6%,the selectivity of C3 alcohol was 96.1%,and the selectivity of propanediol(1,2(3)-propanediol)was 94.9%.It is noteworthy that the selectivity of 1,3-propanediol reached 20.7%when the PW was 21.07%(mass).This study provides experimental evidence for the tandem dehydration and hydrogenation mechanism of the multifunctional Mo/Ru/PW-C catalyst.

Styrene epoxidation catalyzed by polyoxometalate/quaternary ammonium phase transfer catalysts: The effect of cation size and catalyst deactivation mechanism

Catalytic epoxidation of alkenes is an important type of organic reaction in chemical industry,and the deep insight into catalyst deactivation will help to develop new epoxidation process.In this work,series of quaternary ammoniums bearing different cationic sizes,i.e.MTOA+(methyltrioctylammonium,[(C_(8)H_(17))_(3)CH_(3)N]+),HTMA+(hexadecyltrimethylammonium,[(C_(16)H_(33))(CH_(3))_(3)N]+) and DMDOA+(dimethyldioctadecylammonium,[(C_(18)H_(37))_(2)(CH_(3))_(2)N]+) were incorporated with polyoxometalate (POM) anions to prepare phase transfer catalysts (PTCs),which were used in the styrene epoxidations.Among them,(MTOA)_(3)PW_(4)O_(24)exhibits the best catalytic performance judged from the highest styrene conversion rate(52%) and styrene oxide selectivity (93%),during which the styrene epoxidation conditions were optimized.Meanwhile,the deactivation mechanism of this kind of PTCs was proposed firstly,i.e.in the case of low H_(2)O_(2) content,the oxidant can only be used in the styrene epoxidation,in which the catalyst can transform into stable Keggin-type POM.But when the content of H_(2)O_(2) is higher,the excess H_(2)O_(2) can reactivate the Keggin-type POM into active (PW_(4)O_(24))_(3)-anions,which can trigger the ring-opening polymerization of styrene oxide.Consequently,the catalyst is deactivated by adhered poly(styrene oxide)irreversibly,which was determined by NMR spectra.In this situation,the active moiety{PO_(4)[WO(O_(2))_(2)]_(4)}_(3)-in phase-transfer catalytic system can break into some unidentified species with low W/P ratio with the presence of epoxides.This work will be beneficial for the design of new PTCs in alkene epoxidation in fine chemical industry.

Synthesis, Characterization and Catalytic Application of H3PW12O40/MCM-48 in the Acetalization of Butyraldehyde with Glycol

A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of butyraldehyde glycol acetal catalyzed by H3PW12O40/MCM-48 was studied with butyraldehyde and glycol as reactants. H3PW12O40/MCM-48 was an excellent catalyst for the synthesizing butyraldehyde glycol acetal and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（butyraldehyde）： n（glycol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions had been found, that was, molar ratio of butyraldehyde to glycol was 1： 1.6, mass ratio of catalyst used to the reactants was 0.25% and reaction time was 75 min. Under these conditions, the yield of butyraldehyde glycol acetal can reach 79.74%.